Global and local mechanical properties control endonuclease reactivity of a DNA origami nanostructure.

We used coarse-grained molecular dynamics simulations to characterize the global and local mechanical properties of a DNA origami triangle nanostructure. The structure presents two metastable conformations separated by a free energy barrier that is lowered upon omission of four specific DNA staples (defect). In contrast, only one stable conformation is present upon removing eight staples. The metastability is explained in terms of the intrinsic conformations of the three trapezoidal substructures. We computationally modeled the local accessibility to endonucleases, to predict the reactivity of twenty sites, and found good agreement with the experimental data. We showed that global fluctuations affect local reactivity: the removal of the DNA staples increased the computed accessibility to a restriction enzyme, at sites as distant as 40 nm, due to an increase in global fluctuation. These results raise the intriguing possibility of the rational engineering of allosterically modulated DNA origami.

Noncanonical DNA Cleavage by BamHI Endonuclease in Laterally Confined DNA Monolayers Is a Step Function of DNA Density and Sequence.

Cleavage of DNA at noncanonical recognition sequences by restriction endonucleases (star activity) in bulk solution can be promoted by global experimental parameters, including enzyme or substrate concentration, temperature, pH, or buffer composition. To study the effect of nanoscale confinement on the noncanonical behaviour of BamHI, which cleaves a single unique sequence of 6 bp, we used AFM nanografting to generate laterally confined DNA monolayers (LCDM) at different densities, either in the form of small patches, several microns in width, or complete monolayers of thiol-modified DNA on a gold surface. We focused on two 44-bp DNAs, each containing a noncanonical BamHI site differing by 2 bp from the cognate recognition sequence. Topographic AFM imaging was used to monitor end-point reactions by measuring the decrease in the LCDM height with respect to the surrounding reference surface. At low DNA densities, BamHI efficiently cleaves only its cognate sequence while at intermediate DNA densities, noncanonical sequence cleavage occurs, and can be controlled in a stepwise (on/off) fashion by varying the DNA density and restriction site sequence. This study shows that endonuclease action on noncanonical sites in confined nanoarchitectures can be modulated by varying local physical parameters, independent of global chemical parameters.

Physiology of biodeterioration on canvas paintings.

The study of the physiological action of microorganisms in artistic materials is one of the most interesting topics in biodeterioration nowadays. Pathologies and illnesses of organic and inorganic materials provoked by microorganisms can be treated by experts by a variety of preventive interventions. Artistic medicine encompasses the monitoring of the exhibition and storage of art, as well as proper environmental conditions and the regular cleaning of museums. Biodeterioration control is essential in order to prevent fungal and bacterial contamination in artwork. Biodeterioration of canvas paintings is a complex phenomenon, not well-known at the moment. Canvas paintings are created by several artistic techniques on textile supports that are not always kept in the best conditions, and the best parameters of preventive conservation are often not applied. Therefore, we need to research the agents and the main causes that provoke canvas painting biodeterioration. By applying new methodologies, we can identify the alterations and the treatments needed in order to manage the diverse materials employed in artwork correctly. Herein, we review the causes of biodeterioration that affect artwork, especially art created on textile supports. We also study the alterations of the natural filmogenic materials employed in traditional pictorial techniques, such as agglutinants and protection layers, and the biodeterioration agents that impact them. Additionally, we review current scientific methods employed for the identification of microbial species, and the types of alterations of the materials where the organisms grow. Finally, we summarize the different biocides and preventive conservation treatments that are currently employed.

Ribosome-Templated Azide-Alkyne Cycloadditions: Synthesis of Potent Macrolide Antibiotics by In Situ Click Chemistry.

Over half of all antibiotics target the bacterial ribosome-nature's complex, 2.5 MDa nanomachine responsible for decoding mRNA and synthesizing proteins. Macrolide antibiotics, exemplified by erythromycin, bind the 50S subunit with nM affinity and inhibit protein synthesis by blocking the passage of nascent oligopeptides. Solithromycin (1), a third-generation semisynthetic macrolide discovered by combinatorial copper-catalyzed click chemistry, was synthesized in situ by incubating either E. coli 70S ribosomes or 50S subunits with macrolide-functionalized azide 2 and 3-ethynylaniline (3) precursors. The ribosome-templated in situ click method was expanded from a binary reaction (i.e., one azide and one alkyne) to a six-component reaction (i.e., azide 2 and five alkynes) and ultimately to a 16-component reaction (i.e., azide 2 and 15 alkynes). The extent of triazole formation correlated with ribosome affinity for the anti (1,4)-regioisomers as revealed by measured Kd values. Computational analysis using the site-identification by ligand competitive saturation (SILCS) approach indicated that the relative affinity of the ligands was associated with the alteration of macrolactone+desosamine-ribosome interactions caused by the different alkynes. Protein synthesis inhibition experiments confirmed the mechanism of action. Evaluation of the minimal inhibitory concentrations (MIC) quantified the potency of the in situ click products and demonstrated the efficacy of this method in the triaging and prioritization of potent antibiotics that target the bacterial ribosome. Cell viability assays in human fibroblasts confirmed 2 and four analogues with therapeutic indices for bactericidal activity over in vitro mammalian cytotoxicity as essentially identical to solithromycin (1).

Combined computational and experimental analysis of a complex of ribonuclease III and the regulatory macrodomain protein, YmdB.

Ribonuclease III is a conserved bacterial endonuclease that cleaves double-stranded(ds) structures in diverse coding and noncoding RNAs. RNase III is subject to multiple levels of control that in turn confer global post-transcriptional regulation. The Escherichia coli macrodomain protein YmdB directly interacts with RNase III, and an increase in YmdB amount in vivo correlates with a reduction in RNase III activity. Here, a computational-based structural analysis was performed to identify atomic-level features of the YmdB-RNase III interaction. The docking of monomeric E. coli YmdB with a homology model of the E. coli RNase III homodimer yields a complex that exhibits an interaction of the conserved YmdB residue R40 with specific RNase III residues at the subunit interface. Surface Plasmon Resonance (SPR) analysis provided a KD of 61 nM for the complex, corresponding to a binding free energy (ΔG) of -9.9 kcal/mol. YmdB R40 and RNase III D128 were identified by in silico alanine mutagenesis as thermodynamically important interacting partners. Consistent with the prediction, the YmdB R40A mutation causes a 16-fold increase in K(D) (ΔΔG = +1.8 kcal/mol), as measured by SPR, and the D128A mutation in both RNase III subunits (D128A/D128'A) causes an 83-fold increase in KD (ΔΔG = +2.7 kcal/mol). The greater effect of the D128A/D128'A mutation may reflect an altered RNase III secondary structure, as revealed by CD spectroscopy, which also may explain the significant reduction in catalytic activity in vitro. The features of the modeled complex relevant to potential RNase III regulatory mechanisms are discussed.

Characterization of Aquifex aeolicus ribonuclease III and the reactivity epitopes of its pre-ribosomal RNA substrates.

Ribonuclease III cleaves double-stranded (ds) structures in bacterial RNAs and participates in diverse RNA maturation and decay pathways. Essential insight on the RNase III mechanism of dsRNA cleavage has been provided by crystallographic studies of the enzyme from the hyperthermophilic bacterium, Aquifex aeolicus. However, the biochemical properties of A. aeolicus (Aa)-RNase III and the reactivity epitopes of its substrates are not known. The catalytic activity of purified recombinant Aa-RNase III exhibits a temperature optimum of ∼70-85°C, with either Mg2+ or Mn2+ supporting efficient catalysis. Small hairpins based on the stem structures associated with the Aquifex 16S and 23S rRNA precursors are cleaved at sites that are consistent with production of the immediate precursors to the mature rRNAs. Substrate reactivity is independent of the distal box sequence, but is strongly dependent on the proximal box sequence. Structural studies have shown that a conserved glutamine (Q157) in the Aa-RNase III dsRNA-binding domain (dsRBD) directly interacts with a proximal box base pair. Aa-RNase III cleavage of the pre-16S substrate is blocked by the Q157A mutation, which reflects a loss of substrate binding affinity. Thus, a highly conserved dsRBD-substrate interaction plays an important role in substrate recognition by bacterial RNase III.

Multivalent forms of the ribonuclease H1 hybrid binding domain are high-affinity binders of RNA-DNA hybrids.

The hybrid binding domain (HBD) is a conserved fold present in ribonucleases H1 that selectively recognizes RNA-DNA hybrids, which are structures present in cellular R-loops and participate in diverse biological processes. We engineered multivalent HBD proteins to create high-affinity hybrid binders. Using EMSA- and SPR-based analyses, we showed that the triple-HBD protein exhibits a ~ 22 000-fold increase in hybrid affinity (KD 370 pm) relative to the single HBD (KD 8.29 µm), with the length and sequence of the linkers enabling optimal function. These findings provide a framework for testing models that correlate multivalency and affinity to understand how multivalent proteins function and also can serve to guide applications that exploit multivalency as a strategy to enhance binding affinity.

Bacteriophage T7 protein kinase: Site of inhibitory autophosphorylation, and use of dephosphorylated enzyme for efficient modification of protein in vitro.

Bacteriophage T7 encodes a serine/threonine-specific protein kinase that phosphorylates multiple cellular proteins during infection of Escherichia coli. Recombinant T7 protein kinase (T7PK), normally purified in phosphorylated form, exhibits a modest level of phosphotransferase activity. A procedure is described that provides dephosphorylated T7PK with an enhanced ability to phosphorylate protein substrates, including translation initiation factor IF1 and the nuclease domain of ribonuclease III. Mass spectrometric analysis identified Thr12 as the site of IF1 phosphorylation in vitro. T7PK undergoes Mg(2+)-dependent autophosphorylation on Ser216 in vitro, which also is modified in vivo. The inability to isolate the presumptive autophosphorylation-resistant T7PK Ser216Ala mutant indicates a toxicity of the phosphotransferase activity and suggests a role for Ser216 modification in limiting T7PK activity during infection.

Energetically important C-H···F-C pseudohydrogen bonding in water: evidence and application to rational design of oligonucleotides with high binding affinity.

It is controversial whether organic fluorine can form energetically important hydrogen bonds in aqueous environments. We previously showed by NMR and molecular modeling that the unexpectedly high binding affinity of 2'F-ANA is largely due to a C-H···F-C pseudohydrogen bond at pyrimidine-purine steps. Comparisons of the melting of duplexes with identical sequence composition but a rearranged sequence confirm that energetically important fluorine-mediated pseudohydrogen bonding is in operation in these sequences. The effect is of particular importance when the H-bond donor (purine H8) is activated by the presence of fluorine at its own 2'-position. These results provide a rational method to increase the binding affinity of antisense oligonucleotides by placement of 2'F-ANA modifications at pyrimidine-purine steps.

Thermotoga maritima ribonuclease III. Characterization of thermostable biochemical behavior and analysis of conserved base pairs that function as reactivity epitopes for the Thermotoga 23S rRNA precursor.

The cleavage of double-stranded (ds) RNA by ribonuclease III is a conserved early step in bacterial rRNA maturation. Studies on the mechanism of dsRNA cleavage by RNase III have focused mainly on the enzymes from mesophiles such as Escherichia coli. In contrast, neither the catalytic properties of extremophile RNases III nor the structures and reactivities of their cognate substrates have been described. The biochemical behavior of RNase III of the hyperthermophilic bacterium Thermotoga maritima was analyzed using purified recombinant enzyme. T. maritima (Tm) RNase III catalytic activity exhibits a broad optimal temperature range of approximately 40-70 degrees C, with significant activity at 95 degrees C. Tm-RNase III cleavage of substrate is optimally supported by Mg(2+) at >or=1 mM concentrations. Mn(2+), Co(2+), and Ni(2+) also support activity but with reduced efficiencies. The enzyme functions optimally at pH 8 and approximately 50-80 mM salt concentrations. Small RNA hairpins that incorporate the 16S and 23S pre-rRNA stem sequences are efficiently cleaved by Tm-RNase III at sites that are consistent with production in vivo of the immediate precursors to the mature rRNAs. Analysis of pre-23S substrate variants reveals a dependence of reactivity on the base-pair (bp) sequence in the proximal box (pb), a site of protein contact that functions as a positive recognition determinant for Escherichia coli (Ec) RNase III substrates. The dependence of reactivity on the pb sequence is similar to that observed with Ec-RNase III substrates. In fact, Tm-RNase III cleaves an Ec-RNase III substrate with identical specificity and is inhibited by antideterminant bp that also inhibit Ec-RNase III. These results indicate the conservation, across a broad phylogenetic distance, of positive and negative determinants of reactivity of bacterial RNase III substrates.

Heterodimer-based analysis of subunit and domain contributions to double-stranded RNA processing by Escherichia coli RNase III in vitro.

Members of the RNase III family are the primary cellular agents of dsRNA (double-stranded RNA) processing. Bacterial RNases III function as homodimers and contain two dsRBDs (dsRNA-binding domains) and two catalytic sites. The potential for functional cross-talk between the catalytic sites and the requirement for both dsRBDs for processing activity are not known. It is shown that an Escherichia coli RNase III heterodimer that contains a single functional wt (wild-type) catalytic site and an inactive catalytic site (RNase III[E117A/wt]) cleaves a substrate with a single scissile bond with a k(cat) value that is one-half that of wt RNase III, but exhibits an unaltered K(m). Moreover, RNase III[E117A/wt] cleavage of a substrate containing two scissile bonds generates singly cleaved intermediates that are only slowly cleaved at the remaining phosphodiester linkage, and in a manner that is sensitive to excess unlabelled substrate. These results demonstrate the equal probability, during a single binding event, of placement of a scissile bond in a functional or nonfunctional catalytic site of the heterodimer and reveal a requirement for substrate dissociation and rebinding for cleavage of both phosphodiester linkages by the mutant heterodimer. The rate of phosphodiester hydrolysis by RNase III[E117A/wt] has the same dependence on Mg(2+) ion concentration as that of the wt enzyme, and exhibits a Hill coefficient (h) of 2.0+/-0.1, indicating that the metal ion dependence essentially reflects a single catalytic site that employs a two-Mg(2+)-ion mechanism. Whereas an E. coli RNase III mutant that lacks both dsRBDs is inactive, a heterodimer that contains a single dsRBD exhibits significant catalytic activity. These findings support a reaction pathway involving the largely independent action of the dsRBDs and the catalytic sites in substrate recognition and cleavage respectively.

Characterization of RNA sequence determinants and antideterminants of processing reactivity for a minimal substrate of Escherichia coli ribonuclease III.

Members of the ribonuclease III family are the primary agents of double-stranded (ds) RNA processing in prokaryotic and eukaryotic cells. Bacterial RNase III orthologs cleave their substrates in a highly site-specific manner, which is necessary for optimal RNA function or proper decay rates. The processing reactivities of Escherichia coli RNase III substrates are determined in part by the sequence content of two discrete double-helical elements, termed the distal box (db) and proximal box (pb). A minimal substrate of E.coli RNase III, muR1.1 RNA, was characterized and used to define the db and pb sequence requirements for reactivity and their involvement in cleavage site selection. The reactivities of muR1.1 RNA sequence variants were examined in assays of cleavage and binding in vitro. The ability of all examined substitutions in the db to inhibit cleavage by weakening RNase III binding indicates that the db is a positive determinant of RNase III recognition, with the canonical UA/UG sequence conferring optimal recognition. A similar analysis showed that the pb also functions as a positive recognition determinant. It also was shown that the ability of the GC or CG bp substitution at a specific position in the pb to inhibit RNase III binding is due to the purine 2-amino group, which acts as a minor groove recognition antideterminant. In contrast, a GC or CG bp at the pb position adjacent to the scissile bond can suppress cleavage without inhibiting binding, and thus act as a catalytic antideterminant. It is shown that a single pb+db 'set' is sufficient to specify a cleavage site, supporting the primary function of the two boxes as positive recognition determinants. The base pair sequence control of reactivity is discussed within the context of new structural information on a post-catalytic complex of a bacterial RNase III bound to the cleaved minimal substrate.

Catalytic mechanism of Escherichia coli ribonuclease III: kinetic and inhibitor evidence for the involvement of two magnesium ions in RNA phosphodiester hydrolysis.

Escherichia coli ribonuclease III (RNase III; EC 3.1.24) is a double-stranded(ds)-RNA-specific endonuclease with key roles in diverse RNA maturation and decay pathways. E.coli RNase III is a member of a structurally distinct superfamily that includes Dicer, a central enzyme in the mechanism of RNA interference. E.coli RNase III requires a divalent metal ion for activity, with Mg2+ as the preferred species. However, neither the function(s) nor the number of metal ions involved in catalysis is known. To gain information on metal ion involvement in catalysis, the rate of cleavage of the model substrate R1.1 RNA was determined as a function of Mg2+ concentration. Single-turnover conditions were applied, wherein phosphodiester cleavage was the rate-limiting event. The measured Hill coefficient (n (H)) is 2.0 +/- 0.1, indicative of the involvement of two Mg2+ ions in phosphodiester hydrolysis. It is also shown that 2-hydroxy-4H-isoquinoline-1,3-dione--an inhibitor of ribonucleases that employ two divalent metal ions in their catalytic sites--inhibits E.coli RNase III cleavage of R1.1 RNA. The IC50 for the compound is 14 microM for the Mg2+-supported reaction, and 8 microM for the Mn2+-supported reaction. The compound exhibits noncompetitive inhibitory kinetics, indicating that it does not perturb substrate binding. Neither the O-methylated version of the compound nor the unsubstituted imide inhibit substrate cleavage, which is consistent with a specific interaction of the N-hydroxyimide with two closely positioned divalent metal ions. A preliminary model is presented for functional roles of two divalent metal ions in the RNase III catalytic mechanism.

RNA structure-dependent uncoupling of substrate recognition and cleavage by Escherichia coli ribonuclease III.

Members of the ribonuclease III superfamily of double-strand-specific endoribonucleases participate in diverse RNA maturation and decay pathways. Ribonuclease III of the gram-negative bacterium Escherichia coli processes rRNA and mRNA precursors, and its catalytic action can regulate gene expression by controlling mRNA translation and stability. It has been proposed that E.coli RNase III can function in a non-catalytic manner, by binding RNA without cleaving phosphodiesters. However, there has been no direct evidence for this mode of action. We describe here an RNA, derived from the T7 phage R1.1 RNase III substrate, that is resistant to cleavage in vitro by E.coli RNase III but retains comparable binding affinity. R1.1[CL3B] RNA is recognized by RNase III in the same manner as R1.1 RNA, as revealed by the similar inhibitory effects of a specific mutation in both substrates. Structure-probing assays and Mfold analysis indicate that R1.1[CL3B] RNA possesses a bulge- helix-bulge motif in place of the R1.1 asymmetric internal loop. The presence of both bulges is required for uncoupling. The bulge-helix-bulge motif acts as a 'catalytic' antideterminant, which is distinct from recognition antideterminants, which inhibit RNase III binding.

Mechanism of Ribonuclease III Catalytic Regulation by Serine Phosphorylation.

Ribonuclease III (RNase III) is a conserved, gene-regulatory bacterial endonuclease that cleaves double-helical structures in diverse coding and noncoding RNAs. RNase III is subject to multiple levels of control, reflective of its global regulatory functions. Escherichia coli (Ec) RNase III catalytic activity is known to increase during bacteriophage T7 infection, reflecting the expression of the phage-encoded protein kinase, T7PK. However, the mechanism of catalytic enhancement is unknown. This study shows that Ec-RNase III is phosphorylated on serine in vitro by purified T7PK, and identifies the targets as Ser33 and Ser34 in the N-terminal catalytic domain. Kinetic experiments reveal a 5-fold increase in kcat and a 1.4-fold decrease in Km following phosphorylation, providing a 7.4-fold increase in catalytic efficiency. Phosphorylation does not change the rate of substrate cleavage under single-turnover conditions, indicating that phosphorylation enhances product release, which also is the rate-limiting step in the steady-state. Molecular dynamics simulations provide a mechanism for facilitated product release, in which the Ser33 phosphomonoester forms a salt bridge with the Arg95 guanidinium group, thereby weakening RNase III engagement of product. The simulations also show why glutamic acid substitution at either serine does not confer enhancement, thus underscoring the specific requirement for a phosphomonoester.

Mouse ribonuclease III. cDNA structure, expression analysis, and chromosomal location.

BACKGROUND: Members of the ribonuclease III superfamily of double-stranded(ds)-RNA-specific endoribonucleases participate in diverse RNA maturation and decay pathways in eukaryotic and prokaryotic cells. A human RNase III orthologue has been implicated in ribosomal RNA maturation. To better understand the structure and mechanism of mammalian RNase III and its involvement in RNA metabolism we determined the cDNA structure, chromosomal location, and expression patterns of mouse RNase III. RESULTS: The predicted mouse RNase III polypeptide contains 1373 amino acids (approximately 160 kDa). The polypeptide exhibits a single C-terminal dsRNA-binding motif (dsRBM), tandem catalytic domains, a proline-rich region (PRR) and an RS domain. Northern analysis and RT-PCR reveal that the transcript (4487 nt) is expressed in all tissues examined, including extraembryonic tissues and the midgestation embryo. Northern analysis indicates the presence of an additional, shorter form of the transcript in testicular tissue. Fluorescent in situ hybridization demonstrates that the mouse RNase III gene maps to chromosome 15, region B, and that the human RNase III gene maps to a syntenic location on chromosome 5p13-p14. CONCLUSIONS: The broad transcript expression pattern indicates a conserved cellular role(s) for mouse RNase III. The putative polypeptide is highly similar to human RNase III (99% amino acid sequence identity for the two catalytic domains and dsRBM), but is distinct from other eukaryotic orthologues, including Dicer, which is involved in RNA interference. The mouse RNase III gene has a chromosomal location distinct from the Dicer gene.

Ribonuclease III mechanisms of double-stranded RNA cleavage.

Double-stranded(ds) RNA has diverse roles in gene expression and regulation, host defense, and genome surveillance in bacterial and eukaryotic cells. A central aspect of dsRNA function is its selective recognition and cleavage by members of the ribonuclease III (RNase III) family of divalent-metal-ion-dependent phosphodiesterases. The processing of dsRNA by RNase III family members is an essential step in the maturation and decay of coding and noncoding RNAs, including miRNAs and siRNAs. RNase III, as first purified from Escherichia coli, has served as a biochemically well-characterized prototype, and other bacterial orthologs provided the first structural information. RNase III family members share a unique fold (RNase III domain) that can dimerize to form a structure that binds dsRNA and cleaves phosphodiesters on each strand, providing the characteristic 2 nt, 3'-overhang product ends. Ongoing studies are uncovering the functions of additional domains, including, inter alia, the dsRNA-binding and PAZ domains that cooperate with the RNase III domain to select target sites, regulate activity, confer processivity, and support the recognition of structurally diverse substrates. RNase III enzymes function in multicomponent assemblies that are regulated by diverse inputs, and at least one RNase III-related polypeptide can function as a noncatalytic, dsRNA-binding protein. This review summarizes the current knowledge of the mechanisms of catalysis and target site selection of RNase III family members, and also addresses less well understood aspects of these enzymes and their interactions with dsRNA.

Digital imprinting of RNA recognition and processing on a self-assembled nucleic acid matrix.

The accelerating progress of research in nanomedicine and nanobiotechnology has included initiatives to develop highly-sensitive, high-throughput methods to detect biomarkers at the single-cell level. Current sensing approaches, however, typically involve integrative instrumentation that necessarily must balance sensitivity with rapidity in optimizing biomarker detection quality. We show here that laterally-confined, self-assembled monolayers of a short, double-stranded(ds)[RNA-DNA] chimera enable permanent digital detection of dsRNA-specific inputs. The action of ribonuclease III and the binding of an inactive, dsRNA-binding mutant can be permanently recorded by the input-responsive action of a restriction endonuclease that cleaves an ancillary reporter site within the dsDNA segment. The resulting irreversible height change of the arrayed ds[RNA-DNA], as measured by atomic force microscopy, provides a distinct digital output for each dsRNA-specific input. These findings provide the basis for developing imprinting-based bio-nanosensors, and reveal the versatility of AFM as a tool for characterizing the behaviour of highly-crowded biomolecules at the nanoscale.

Evidence for a dual functional role of a conserved histidine in RNA·DNA heteroduplex cleavage by human RNase H1.

Ribonuclease H1 is a conserved enzyme that cleaves the RNA strand of RNA·DNA heteroduplexes and has important functions in the nuclear and mitochondrial compartments. The therapeutic action of antisense oligodeoxynucleotides involves the recruitment of RNase H1 to cleave disease-relevant RNA targets. Recombinant human (Hs) RNase H1 was purified from a bacterial expression host, and conditions were identified that provided optimal oligonucleotide-directed RNA cleavage in vitro. Hs-RNase H1 exhibits optimal catalytic activity in pH 7.5 HEPES buffer and a salt (KCl) concentration of ~ 100-150 mm. Mg(2+) best supports Hs-RNase H1 with an optimal concentration of 10 mm, but at higher concentrations inhibits enzyme activity. Mn(2+) and Co(2+) also support catalytic activity, while Ni(2+) and Zn(2+) exhibit only modest activities as cofactors. The optimized assay was used to show that an antisense oligonucleotide, added in substoichiometric amounts to initiate RNA cleavage, supports up to 30 rounds of reaction in 30 min. Mutation to alanine of the conserved histidine at position 264 causes an ~ 100-fold decrease in k(cat) under multiple-turnover conditions, but does not alter K(m) . Under single-turnover conditions, the H264A mutant exhibits a 12-fold higher exponential time constant for substrate cleavage. The defective activity of the H264A mutant is not rescued in either assay condition by higher Mg(2+) concentrations. These data implicate the H264 side chain in phosphodiester hydrolysis as well as in product release, and are consistent with a proposed model in which the H264 side chain interacts with a divalent metal ion to support catalysis.

New approaches to understanding double-stranded RNA processing by ribonuclease III purification and assays of homodimeric and heterodimeric forms of RNase III from bacterial extremophiles and mesophiles.

Ribonuclease III (RNase III) is a double-stranded (ds)-RNA-specific endonuclease that plays essential roles in the maturation and decay of coding and noncoding RNAs. Bacterial RNases III are structurally the simplest members of the RNase III family, which includes the eukaryotic orthologs Dicer and Drosha. High-resolution crystal structures of RNase III of the hyperthermophilic bacteria Aquifex aeolicus and Thermotoga maritima are available. A. aeolicus RNase III also has been cocrystallized with dsRNA or specific hairpin substrates. These structures have provided essential structural insight to the mechanism of dsRNA recognition and cleavage. However, comparatively little is known about the catalytic behaviors of A. aeolicus or T. maritima RNases III. This chapter provides protocols for the purification of A. aeolicus and T. maritima RNases III and also describes the preparation of artificial heterodimers of Escherichia coli RNase III, which are providing new insight on the subunit and domain interactions involved in dsRNA recognition and cleavage.