Nonadditivities of the Particle Sizes Hidden in Model Pair Potentials and Their Effects on Physical Adsorptions.

It is important to understand the mechanism of colloidal particle assembly near a substrate for development of drug delivery systems, micro-/nanorobots, batteries, heterogeneous catalysts, paints, and cosmetics. Understanding the mechanism is also important for crystallization of the colloidal particles and proteins. In this study, we calculated the physical adsorption of colloidal particles on a flat wall mainly using the integral equation theory, wherein small and large colloidal particles were employed. In the calculation system, like-charged electric double-layer potentials were used as pair potentials. In some cases, it was found that the small particles are more easily adsorbed. This result is unusual from the viewpoint of the Asakura-Oosawa theory, and we call it a "reversal phenomenon". Theoretical analysis revealed that the reversal phenomenon originates from the nonadditivities of the particle sizes. Using the knowledge obtained from this study, we invented a method to analyze the size nonadditivity hidden in model pair potentials. The method will be useful for confirmation of various simulation results regarding the adsorption and development of force fields for colloidal particles, proteins, and solutes.

Au Nanofiber/CNT 1D/1D Composites Formed Via Redox Reaction at the Ionic Liquid/Water Interface.

Au nanofiber/carbon nanotube (CNT) 1D/1D composites and Janus-type Au/CNT composites have been prepared by utilizing the liquid/liquid interface between water (W) and a hydrophobic ionic liquid (IL) as a redox reaction site. AuCl4- in W is reduced at the IL/W interface where CNTs are adsorbed, by a reducing agent in the IL, leading to the formation of the Au/CNT composites. The Au/CNT composites are Janus-type in which Au microurchins and Au nanofibers are deposited on the W side and the IL side of the CNTs on the IL/W interface, respectively. Reversing the order of the CNT adsorption and AuCl4- reduction results in the formation of the Au nanofiber/CNT composites, which are 1D/1D metal/carbon composites.

Evaluation of static differential capacitance at the [C4mim+][TFSA-]/electrode interface using molecular dynamics simulation combined with electrochemical surface plasmon resonance measurements.

Molecular dynamic (MD) simulations have been performed for 1-butyl-3-methylimidazolium bis(trifluoromethanesulfonyl)amide ([C4mim+][TFSA-]), an ionic liquid (IL), on a charged graphene electrode to achieve the quantitative analysis of the static differential capacitance using the electrochemical surface plasmon resonance (ESPR). The MD simulations have provided the surface charge density on the electrode and ionic distributions in the electric double layer, both of which are indispensable for the evaluation of static differential capacitance using ESPR but are difficult to be measured by experimental techniques. This approach has allowed the quantitative analysis and explanation of the SPR angle shift in ESPR. The major contribution to the SPR angle shift is found to be the change in ionic concentrations of the first ionic layer on the electrode, owing to higher polarizabilities of ions in the first ionic layer than those in the overlayers. Moreover, the ionic orientation on the electrode and ionic multilayer structure have also been investigated in detail. The butyl group of C4mim+ in the first ionic layer is found to provide extra room for C4mim+ in the second ionic layer but exclude TFSA-, which affects the interval and regularity of ionic multilayers.

Potential dependence of the ionic structure at the ionic liquid/water interface studied using MD simulation.

The structure at the electrochemical liquid/liquid interface between water (W) and trioctylmethylammonium bis(nonafluorobutanesulfonyl)amide, a hydrophobic ionic liquid (IL), was studied using molecular dynamics (MD) simulation in which the interfacial potential difference was controlled. On the IL side of the IL/W interface, ionic multilayers were found in the number density distribution of IL ions whereas monolayer-thick charge accumulation was found in the charge density distribution. This suggests that the potential screening is completed within the first ionic layer and the effect of overlayers on the potential is marginal. The W side of the interface showed the diffuse electric double layer as expected, and unexpectedly unveiled a density depletion layer, indicating that the IL surface is hydrophobic enough to be repelled by water. The IL ions in the first ionic layer showed anisotropic orientation even at the potential of zero charge, in which the polar moieties were oriented to the W side and the non-polar moieties preferred parallel orientation to the interface. When an electric field is applied across the interface so that the IL ions are more accumulated, the non-polar moieties changed the parallel preference to more oriented to the IL side due to the dipolar nature of the IL ions. The ionic orientations at the IL/W interface were compared with those at other two IL interfaces, the vacuum and graphene interfaces of the IL. The parallel preference of the non-polar moieties was similar at the IL/graphene interface but different from the perpendicular orientation toward the vacuum side at the IL/vacuum interface. The comparison suggests that water behaves like a wall that repels IL ions like a solid electrode.

Comparison of atomic force microscopy force curve and solvation structure studied by integral equation theory.

Atomic force microscopy can observe structures of liquids (solvents) on solid surfaces as oscillating force curves. The oscillation originates from the solvation force, which is affected by the interaction between the probe, substrate, and solvents. To investigate the effects of the interactions on the force curve, we calculated the force curves by integral equation theory with various probe and substrate conditions. The probe solvophilicity affected the force curves more than the substrate solvophilicity in our calculation, and its reason is qualitatively explained by the amount of the desolvated solvents. We evaluated the probes and parameters in terms of the qualitative estimation of the number density distribution of the solvent on the wall. The negative of the force curve's derivative with respect to the surface separation reflected the number density distribution better than the force curve. This parameter is based on the method that is proposed previously by Amano et al. [Phys. Chem. Chem. Phys. 18, 15534 (2016)]. The normalized frequency shift can also be used for the qualitative estimation of the number density distribution if the cantilever amplitude is small. Solvophobic probes reflected the number density distribution better than the solvophilic probes. Solvophilic probes resulted in larger oscillation amplitudes than solvophobic probes and are suitable for measurements with a high S/N ratio.

How Viscous Is the Solidlike Structure at the Interface of Ionic Liquids? A Study Using Total Internal Reflection Fluorescence Spectroscopy with a Fluorescent Molecular Probe Sensitive to High Viscosity.

Aiming at the evaluation of the viscosity of the interfacial solidlike structure of ionic liquids (ILs), we performed total internal reflection fluorescence (TIRF) spectroscopy for N,N-diethyl-N'-phenyl-rhodamine (Ph-DER), a fluorescent probe that is sensitive to viscosity in a high-viscosity range. TIRF spectra at the glass interface of trioctylmethylammonium bis(nonafluorobutanesulfonyl)amide (TOMAC4C4N), a hydrophobic IL, showed that the fluorescence intensity of Ph-DER increases with the decrease of the evanescence penetration depth, suggesting that there exists a high-viscosity region at the interface. In contrast, glycerol, which is a molecular liquid with a bulk viscosity similar to that of TOMAC4C4N, did not show such a fluorescence increase, supporting that the formation of a highly viscous solidlike structure at the interface is intrinsic to ILs. A model analysis suggested that the high viscous region at the glass interface of TOMAC4C4N is at least twice thicker than the ionic multilayers at the air interface, implying that the solid substrate enhances the ordering of the interfacial structure of ILs. The viscosity at the glass interface of TOMAC4C4N was found to be at least 40 times higher than that of the liquid bulk.

An electric double layer structure and differential capacitance at the electrode interface of tributylmethylammonium bis(trifluoromethanesulfonyl)amide studied using a molecular dynamics simulation.

A molecular dynamics simulation at the electrode interface of a quaternary ammonium ionic liquid, tributylmethylammonium bis(trifluoromethanesulfonyl)amide ([N1444+][TFSA-]), has been performed. Unlike the commonly used cations, such as 1-alkyl-3-methylimidazolium and 1,1-alkylmethylpyrrolidinium cations, N1444+ has multiple long-alkyl groups (three butyl groups). The behavior of ions at the electrode interface, especially these butyl groups, has been investigated. N1444+ at the first layer mainly has two types of orientations, lying and standing. The lying orientation is dominant at moderately negative potentials. However, the standing one becomes dominant at the more negative potentials. Due to this orientational change, the number of N1444+ increases at the first layer as the potential becomes negative even at the potentials where the anions are completely depleted there. The change in orientation results in the upward deviation of the differential capacitance from the theoretical prediction at the negative potentials. The results suggest that the orientational preference caused by the steric constraint between alkyl groups plays an important role in the behavior of the electric double layer of the ionic liquids.

Electrochemical surface plasmon resonance measurements of camel-shaped static capacitance and slow dynamics of electric double layer structure at the ionic liquid/electrode interface.

Electrochemical surface plasmon resonance (ESPR) is applied to evaluate the relative static differential capacitance at the interface between 1-butyl-3-methylimidazolium bis(trifluoromethanesulfonyl)amide ionic liquid (IL) and a gold electrode, based on the relationship between the SPR angle and surface charge density on the electrode. Potential-step and potential-scan ESPR measurements are used to probe the dynamics of the electric double layer (EDL) structure that exhibit anomalously slow and asymmetrical characteristics depending on the direction of potential perturbation. EDL dynamics respond at least 30 times more slowly to changes of potential in the positive direction than in the negative direction. ESPR experiments with the positive-going potential scan are significantly affected by the slow dynamics even at a slow scan. The surface charge density that reflects the relative static capacitance is obtained from the negative-going potential scans. The evaluated quasi-static differential capacitance exhibits a camel-shaped potential dependence, thereby agreeing with the prediction of the mean-field lattice gas model of the EDL in ILs. ESPR is shown to be an effective experimental method for determining relative values of the static differential capacitance.

Janus-Type Gold/Polythiophene Composites Formed via Redox Reaction at the Ionic Liquid|Water Interface.

Janus-type Au/polythiophene (PT) composites have been prepared by utilizing the liquid/liquid interface between water (W) and a hydrophobic ionic liquid (IL) as the redox reaction site. AuCl4- is reductively deposited, and terthiophene is oxidatively polymerized spacio-selectively at the IL|W interface, leading to the formation of the Au/PT composites. The composites are Janus-type Au-attached PT plates with two surface morphologies, flat surface and flowerlike surface at the W and IL sides of the plates at the IL|W interface, respectively. Not only surface morphologies but also attached Au structures are different at the two surfaces; Au microurchins on the flat surface and dendritic Au nanofibers on the flowerlike surface. Optical and scanning electron microscopic observations have revealed that nanofibers and microurchins are formed at the early and later stage of the reaction, respectively. Electrochemistry at the IL|W interface has illustrated that electron transfer across the IL|W interface during the formation of the Janus-type Au/PT composites is coupled with ion transfer of AuCl4- to compensate for the charge unbalance in the two liquid phases. AuCl4- transferred into IL is found to be the source of the dendritic Au nanofibers formed at the IL side of the PT plates.

Ion Distribution and Hydration Structure in the Stern Layer on Muscovite Surface.

Based on molecular dynamics simulations of eight ions (Na+, K+, Rb+, Cs+, Mg2+, Ca2+, Sr2+, and Ba2+) on muscovite mica surfaces in water, we demonstrate that experimental data on the muscovite mica surface can be rationalized through a unified picture of adsorption structures including the hydration structure, cation heights from the muscovite surface, and state stability. These simulations enable us to categorize the inner-sphere surface complex into two different species: an inner-sphere surface complex in a ditrigonal cavity (IS1) and that on top of Al (IS2). By considering the presence of the two inner-sphere surface complexes, the experimental finding that the heights of adsorbed cations from the muscovite surface are proportional to the ionic radius for K+ and Cs+ but inversely proportional to the ionic radius for Ca2+ and Ba2+ was explained. We find that Na+, Ca2+, Sr2+, and Ba2+ can form both IS1 and IS2; K+, Rb+, and Cs+ can form only IS1; and Mg2+ can form only IS2. It is suggested that the formation of IS1 and IS2 is governed by the charge density of the ions. Among the eight ions, we also find that the hydration structure for the outer-sphere surface complexes of divalent cations differs from that of the monovalent cations by one adsorbed water molecule (i.e., a water molecule located in a ditrigonal cavity).

A relationship between the force curve measured by atomic force microscopy in an ionic liquid and its density distribution on a substrate.

An ionic liquid forms a characteristic solvation structure on a substrate. For example, when the surface of the substrate is negatively or positively charged, cation and anion layers are alternately aligned on the surface. Such a solvation structure is closely related to slow diffusion, high electric capacity, and chemical reactions at the interface. To analyze the periodicity of the solvation structure, atomic force microscopy is often used. The measured force curve is generally oscillatory and its characteristic oscillation length corresponds not to the ionic diameter, but to the ion-pair diameter. However, the force curve is not the solvation structure. Hence, it is necessary to know the relationship between the force curve and the solvation structure. To find physical essence in the relationship, we have used statistical mechanics of a simple ionic liquid. We found that the basic relationship can be expressed by a simple equation and the reason why the oscillation length corresponds to the ion-pair diameter. Moreover, it is also found that Derjaguin approximation is applicable to the ionic liquid system.

Number Density Distribution of Small Particles around a Large Particle: Structural Analysis of a Colloidal Suspension.

Some colloidal suspensions contain two types of particles-small and large particles-to improve the lubricating ability, light absorptivity, and so forth. Structural and chemical analyses of such colloidal suspensions are often performed to understand their properties. In a structural analysis study, the observation of the number density distribution of small particles around a large particle (gLS) is difficult because these particles are randomly moving within the colloidal suspension by Brownian motion. We obtain gLS using the data from a line optical tweezer (LOT) that can measure the potential of mean force between two large colloidal particles (ΦLL). We propose a theory that transforms ΦLL into gLS. The transform theory is explained in detail and tested. We demonstrate for the first time that LOT can be used for the structural analysis of a colloidal suspension. LOT combined with the transform theory will facilitate structural analyses of the colloidal suspensions, which is important for both understanding colloidal properties and developing colloidal products.

Molecular Dynamics Simulation of Atomic Force Microscopy at the Water-Muscovite Interface: Hydration Layer Structure and Force Analysis.

With the development of atomic force microscopy (AFM), it is now possible to detect the buried liquid-solid interfacial structure in three dimensions at the atomic scale. One of the model surfaces used for AFM is the muscovite surface because it is atomically flat after cleavage along the basal plane. Although it is considered that force profiles obtained by AFM reflect the interfacial structures (e.g., muscovite surface and water structure), the force profiles are not straightforward because of the lack of a quantitative relationship between the force and the interfacial structure. In the present study, molecular dynamics simulations were performed to investigate the relationship between the muscovite-water interfacial structure and the measured AFM force using a capped carbon nanotube (CNT) AFM tip. We provide divided force profiles, where the force contributions from each water layer at the interface are shown. They reveal that the first hydration layer is dominant in the total force from water even after destruction of the layer. Moreover, the lateral structure of the first hydration layer transcribes the muscovite surface structure. It resembles the experimentally resolved surface structure of muscovite in previous AFM studies. The local density profile of water between the tip and the surface provides further insight into the relationship between the water structure and the detected force structure. The detected force structure reflects the basic features of the atomic structure for the local hydration layers. However, details including the peak-peak distance in the force profile (force-distance curve) differ from those in the density profile (density-distance curve) because of disturbance by the tip.

Number density distribution of solvent molecules on a substrate: a transform theory for atomic force microscopy.

Atomic force microscopy (AFM) in liquids can measure a force curve between a probe and a buried substrate. The shape of the measured force curve is related to hydration structure on the substrate. However, until now, there has been no practical theory that can transform the force curve into the hydration structure, because treatment of the liquid confined between the probe and the substrate is a difficult problem. Here, we propose a robust and practical transform theory, which can generate the number density distribution of solvent molecules on a substrate from the force curve. As an example, we analyzed a force curve measured by using our high-resolution AFM with a newly fabricated ultrashort cantilever. It is demonstrated that the hydration structure on muscovite mica (001) surface can be reproduced from the force curve by using the transform theory. The transform theory will enhance AFM's ability and support structural analyses of solid/liquid interfaces. By using the transform theory, the effective diameter of a real probe apex is also obtained. This result will be important for designing a model probe of molecular scale simulations.

Correction: Number density distribution of solvent molecules on a substrate: a transform theory for atomic force microscopy.

Correction for 'Number density distribution of solvent molecules on a substrate: a transform theory for atomic force microscopy' by Ken-ichi Amano et al., Phys. Chem. Chem. Phys., 2016, 18, 15534-15544.

On-site quantitative elemental analysis of metal ions in aqueous solutions by underwater laser-induced breakdown spectroscopy combined with electrodeposition under controlled potential.

We propose a technique of on-site quantitative analysis of Zn(2+) in aqueous solution based on the combination of electrodeposition for preconcentration of Zn onto a Cu electrode and successive underwater laser-induced breakdown spectroscopy (underwater LIBS) of the electrode surface under electrochemically controlled potential. Zinc emission lines are observed with the present technique for a Zn(2+) concentration of 5 ppm. It is roughly estimated that the overall sensitivity over 10 000 times higher is achieved by the preconcentration. Although underwater LIBS suffers from the spectral deformation due to the dense plasma confined in water and also from serious shot-to-shot fluctuations, a linear calibration curve with a coefficient of determination R(2) of 0.974 is obtained in the range of 5-50 ppm.

Spontaneous Formation of Microgroove Arrays on the Surface of p-Type Porous Silicon Induced by a Turing Instability in Electrochemical Dissolution.

Self-organization plays an imperative role in recent materials science. Highly tunable, periodic structures based on dynamic self-organization at micrometer scales have proven difficult to design, but are desired for the further development of micropatterning. In the present study, we report a microgroove array that spontaneously forms on a p-type silicon surface during its electrodissolution. Our detailed experimental results suggest that the instability can be classified as Turing instability. The characteristic scale of the Turing-type pattern is small compared to self-organized patterns caused by the Turing instabilities reported so far. The mechanism for the miniaturization of self-organized patterns is strongly related to the semiconducting property of silicon electrodes as well as the dynamics of their surface chemistry.

Electrocapillarity and zero-frequency differential capacitance at the interface between mercury and ionic liquids measured using the pendant drop method.

The structure of ionic liquids (ILs) at the electrochemical IL|Hg interface has been studied using the pendant drop method. From the electrocapillarity (potential dependence of interfacial tension) differential capacitance (Cd) at zero frequency (in other words, static differential capacitance or differential capacitance in equilibrium) has been evaluated. The potential dependence of zero-frequency Cd at the IL|Hg interface exhibits one or two local maxima near the potential of zero charge (Epzc), depending on the cation of the ILs. For 1-ethyl-3-methylimidazolium tetrafluoroborate, an IL with the cation having a short alkyl chain, the Cdvs. potential curve has one local maximum whereas another IL, 1-octyl-3-methylimidazolium tetrafluoroborate, with the cation having a long alkyl chain, shows two maxima. These behaviors of zero-frequency Cd agree with prediction by recent theoretical and simulation studies for the electrical double layer in ILs. At negative and positive potentials far from Epzc, the zero-frequency Cd increases for both the ILs studied. The increase in zero-frequency Cd is attributable to the densification of ionic layers in the electrical double layer.

Two-dimensional array of particles originating from dipole-dipole interaction as evidenced by potential curve measurements at vertical oil/water interfaces.

We propose a new method to evaluate the interaction potential energy between the particles adsorbed at an oil/water interface as a function of interparticle distance. The method is based on the measurement of the interparticle distance at a vertical oil/water interface, at which the gravitational force is naturally applied to compress the particle monolayer in the in-plane direction. We verified the method by examining whether we obtained the same potential curve upon varying the gravitational acceleration by tilting the interface. The present method is applicable in the force range from ∼0.1 to ∼100 pN, determined by the effective weight of the particles at the interface. The method gives a rather simple procedure to estimate a long range interaction among the particles adsorbed at oil/water interfaces. We applied this method to polystyrene particles at the decane/aqueous surfactant solution interface, and obtained the interparticle potential curves. All the potential curves obtained by the present method indicated that the interparticle repulsion is due to the electrical dipole-dipole interaction based on the negative charge of the particles. The mechanism of the dipole-dipole interaction is further discussed on the basis of the effects of surfactants.