Green hybrid coagulants for water treatment: An innovative approach using alum and bentonite clay combined with eco-friendly plant materials for batch and column adsorption.

Textile industries contribute to water pollution through synthetic dye discharge. This study explores the use of natural bio-coagulants to remove acid dyes from wastewater, investigating factors like pH, coagulant dose, dye concentration, contact time, and temperature for optimal results. The optimum pH and coagulants capabilities of (CAAPP, CAAPH, CBAGL, CBAPP and CBAPH) were 3 (49.6 mg/g), 3 (42.5 mg/g), 3 (38.9 mg/g), 4 (35.7 mg/g), 4 (34.1 mg/g), and 4 (29.4 mg/g) respectively, while treating of selected BRF-221 dyes from water solution. The acidic range (3-4) was found to have the best pH for the maximal coagulation, and the optimal dose were found to be 0.05 g/50 mL. The equilibrium was attained within 45-60 min for all coagulants. After 60 min of shaking, the maximum coagulation capacities (21.9, 21.02, 16.5, 27.9, 25.3, and 23.4 mg/g) of several coagulant composites (CAAGL, CAAPP, CAAPH, CBAGL, CBAPP, CBAPH) were determined. The initial BRF-221 dye concentration in the range of 10-200 mg/L was considered as optimum for gaiting maximum elimination of dye using different coagulants. At a dye value of 100 mg/L of BRF-221, maximal coagulation capacities CAAGL (179.19 mg/g), CAAPP (166.06 mg/g), CAAPH (141.60 mg/g), and CBAGL (126.49 mg/g), CBAPP (113.9 mg/g), CBAPH (93.08 mg/g) were attained. The study found 35 °C to be the optimal temperature for maximum acid dye removal using bio-coagulants. Increasing temperature reduced coagulation capacity, indicating an exothermic process. Freundlich and Langmuir isotherms showed suitability for pseudo-first-order and pseudo-second-order kinetics in biosorption. Thermodynamic parameters were assessed for process feasibility. Effective coagulants demonstrated sensitivity to electrolyte variations. In column studies, adjusting parameters achieved maximum coagulation efficiency for removing BRF-221 dyes. The study successfully applied optimal parameters to remove real textile effluents at a practical scale. SEM, FT-IR, BET and XRD characterized coagulants, providing insights into stability and morphology.

Actas Pink-2B dye removal in biochar nanocomposites augmented vertical flow constructed wetland (VF-CWs).

Industries generate hazardous dye wastewater, posing significant threats to public health and the environment. Removing dyes before discharge is crucial. The ongoing study primarily focused on synthesizing, applying, and understanding the mechanism of green nano-biochar composites. These composites, including zinc oxide/biochar, copper oxide/biochar, magnesium oxide/biochar, and manganese oxide/biochar, are designed to effectively remove Actas Pink-2B (Direct Red-31) in conjunction with constructed wetlands. Constructed wetland maintained pH 6.0-7.9. At the 10th week, the copper oxide/biochar treatment demonstrated the highest removal efficiency of total suspended solids (72%), dissolved oxygen (7.2 mg/L), and total dissolved solids (79.90%), followed by other biochar composites. The maximum removal efficiency for chemical oxygen demand (COD) and color was observed at a retention time of 60 days. The electrical conductivity also followed the same order, with a decrease observed up to the 8th week before becoming constant. A comprehensive statistical analysis was conducted, encompassing various techniques including variance analysis, regression analysis, correlation analysis, and principal component analysis. The rate of color and COD removal followed a second-order and first-order kinetics, respectively. A significant negative relationship was observed between dissolved oxygen and COD. The study indicates that employing biochar composites in constructed wetlands improves textile dye removal efficiency.

The novelty of this study is the selection of Cymbopogon as a proper plant for phytoremediation of dye along with green metal oxide coated biochar. These were selected due to their good ability to remove organic pollutant. This study demonstrates the uptake and degradation processes of persistent dye in constructed wetland.

Biochar imparted constructed wetlands (CWs) for enhanced biodegradation of organic and inorganic pollutants along with its limitation.

The remediation of polluted soil and water stands as a paramount task in safeguarding environmental sustainability and ensuring a dependable water source. Biochar, celebrated for its capacity to enhance soil quality, stimulate plant growth, and adsorb a wide spectrum of contaminants, including organic and inorganic pollutants, within constructed wetlands, emerges as a promising solution. This review article is dedicated to examining the effects of biochar amendments on the efficiency of wastewater purification within constructed wetlands. This comprehensive review entails an extensive investigation of biochar's feedstock selection, production processes, characterization methods, and its application within constructed wetlands. It also encompasses an exploration of the design criteria necessary for the integration of biochar into constructed wetland systems. Moreover, a comprehensive analysis of recent research findings pertains to the role of biochar-based wetlands in the removal of both organic and inorganic pollutants. The principal objectives of this review are to provide novel and thorough perspectives on the conceptualization and implementation of biochar-based constructed wetlands for the treatment of organic and inorganic pollutants. Additionally, it seeks to identify potential directions for future research and application while addressing prevailing gaps in knowledge and limitations. Furthermore, the study delves into the potential limitations and risks associated with employing biochar in environmental remediation. Nevertheless, it is crucial to highlight that there is a significant paucity of data regarding the influence of biochar on the efficiency of wastewater treatment in constructed wetlands, with particular regard to its impact on the removal of both organic and inorganic pollutants.

The Fabrication of Halogen-Doped FeWO4 Heterostructure Anchored over Graphene Oxide Nanosheets for the Sunlight-Driven Photocatalytic Degradation of Methylene Blue Dye.

Rapid industrialization and urbanization are the two significant issues causing environmental pollution. The polluted water from various industries contains refractory organic materials such as dyes. Heterogeneous photocatalysis using semiconductor metal oxides is an effective remediation technique for wastewater treatment. In this research, we used a co-precipitation-assisted hydrothermal method to synthesize a novel I-FeWO4/GO sunlight-active nanocomposite. Introducing dopant reductive iodine species improved the catalytic activity of FeWO4/GO. I- ions improved the catalytic performance of H2O2 by doping into FeWO4/GO composite. Due to I- doping and the introduction of graphene as a support medium, enhanced charge separation and transfer were observed, which is crucial for efficient heterogeneous surface reactions. Various techniques, like FTIR, SEM-EDX, XRD, and UV-Vis spectroscopy, were used to characterize composites. The Tauc plot method was used to calculate pristine and iodine-doped FeWO4/GO bandgap. Iodine doping reduced the bandgap from 2.8 eV to 2.6 eV. The degradation of methylene blue (MB) was evaluated by optimizing various parameters like catalyst concentration, oxidant dose, pH, and time. The optimum conditions for photocatalysts where maximum degradation occurred were pH = 7 for both FeWO4/GO and I-FeWO4/GO; oxidant dose = 9 mM and 7 mM for FeWO4/GO and I-FeWO4/GO; and catalyst concentration = 30 mg and 35 mg/100 mL for FeWO4/GO and I-FeWO4/GO; the optimum time was 120 min. Under these optimum conditions, FeWO4/GO and I-FeWO4/GO showed 92.0% and 97.0% degradation of MB dye.

Utilization of ZnFe2O4-Polyaniline (PANI), ZnFe2O4-Polystyrene (PST), and ZnFe2O4-Polypyrrole (PPy) nanocomposites for removal of Red X-GRL and Direct Sky Blue dyes from wastewater: Equilibrium, kinetic and thermodynamic studies.

In this study, ZnFe2O4-Polyaniline (PANI), ZnFe2O4-Polystyrene (PST), and ZnFe2O4-Polypyrrole (Ppy) nanocomposites were synthesized by the adsorption method and characterized by field emission scanning electron microscopy and Fourier transform infrared spectrometer. Batch adsorption experiments were conducted for removing two types of hazardous dyes Red X-GRL and Direct Sky Blue 51 from an aqueous solution and the effect of pH, adsorbent dosage, contact time, and initial concentration of dyes were investigated. Meanwhile, kinetic, isotherm, and thermodynamic parameters were also determined. The electrolyte and surfactant effect was also tested for the prepared nanocomposites. To test the reusability desorption study was also conducted.

Mixed metal ferrite (Mn0.6Zn0.4Fe2O4) intercalated g-C3N4nanocomposite: efficient sunlight driven photocatalyst for methylene blue degradation.

Visible active mixed metal ferrite intercalated semiconductor photocatalyst Mn0.6Zn0.4Fe2O4/g-C3N4was prepared via facile hydrothermal and liquid assembly method for methylene blue (MB) dye degradation. The prepared samples were well characterized in term of their functional groups, crystallinity, elemental analysis, surface morphology using Fourier transform infrared spectroscopy, x-ray diffraction spectroscopy, energy dispersive x-ray, and scanning electron microscopy, respectively. The optical response of catalysts was checked by estimating the energy band gap (Eg) of semiconductor photocatalysts using UV-vis spectroscopy. The photoluminescence spectroscopy was also performed to estimate the reduction in emission intensity after insertion of g-C3N4into Mn0.6Zn0.4Fe2O4.The novel composition of Mn0.6Zn0.4Fe2O4with g-C3N4,improved the optical response of pristine photocatalysts due to the reduction in the energy band gap and insertion of heterojunction. The surface area analysis of Mn0.6Zn0.4Fe2O4and Mn0.6Zn0.4Fe2O4/g-C3N4were acquired by Brunauer-Emmett-Teller. Point zero charge was also determined to observe the surface behavior of composite under different solution pH. Various parameters such as pH, catalyst dose, oxidant dose, irradiation time and initial dye concentration were optimized, and their effects were studied in photo-Fenton process. It was observed that 98% MB dye was degraded under optimized conditions (pH = 8, composite dose = 50 mg/100 ml, oxidant dose = 7 mM, initial dye conc. = 10 ppm, and irradiation time = 120 min). The results showed that when the ferrites of mixed metals (Mn, Zn) were used with g-C3N4their photocatalytic activity enhanced due to mutual effect of both mixed metals ferrite and g-C3N4, which is considerably higher than their individual effect already reported. Furthermore, the combined effect of independent variables was evaluated by response surface methodology.

Investigating the mediating effect of working memory on intentional forgetting in dysphoria.

Our aim was to determine if deficits in intentional forgetting that are associated with depression and dysphoria (subclinical depression) could be explained, at least in part, by variations in working memory function. Sixty dysphoric and 61 non-dysphoric participants completed a modified version of the think/no-think (TNT) task and a measure of complex working memory (the operation span task). The TNT task involved participants learning a series of emotional cue-target word pairs, before being presented with a subset of the cues and asked to either recall the associated target (think) or to prevent it from coming to mind (no think) by thinking about a substitute target word. Participants were subsequently asked to recall the targets to all cues (regardless of previous recall instructions). As expected, after controlling for anxiety, we found that dysphoric individuals exhibited impaired forgetting relative to the non-dysphoric participants. Also as expected, we found that superior working memory function was associated with more successful forgetting. Critically, in the dysphoric group, we found that working memory mediated the effect of depression on intentional forgetting. That is, depression influenced forgetting indirectly via its effect on working memory. However, under conditions of repeated suppression, there was also a direct effect of depression on forgetting. These findings represent an important development in the understanding of impaired forgetting in depression and also suggest that working memory training might be a viable intervention for improving the ability of depressed individuals to prevent unwanted memories from coming to mind.

Entropy Generation via Ohmic Heating and Hall Current in Peristaltically-Flowing Carreau Fluid.

The core objective of the present study is to examine entropy generation minimization via Hall current and Ohmic heating. Carreau fluid considerations interpret the unavailability of systems' thermal energy (for mechanical work). The magneto hydrodynamic flow is in the channel, which is not symmetric. We have solved analytically the resulting nonlinear mathematical model. Moreover, physical exploration of important parameters on total entropy generation, temperature, and Bejan number is plotted and discussed. We observed that the generation of entropy takes place throughout the confined flow field y = W1 and y = W2 because of the viscous dissipation effect. In addition, reducing the operating temperature minimizes the entropy.

Basic Dye Adsorption onto Clay/MnFe2O4 Composite: A Mechanistic Study.

Native, HCl pretreated clay and MnFe2O4/clay composite were investigated as an adsorbent for crystal violet (CV) removal. The adsorption behavior of dye was studied in batch experiments as a function of contact time, adsorbent dose, pH, dye initial concentration and temperature. The medium pH 8, contact time 30 min, MnFe2O4/clay composite dose 0.05 mg/L, temperature 35 °C and 100 mg/L dye initial concentration furnished maximum CV adsorption. Adsorption data fitted well to the Langmuir isotherm model and maximum CV dye adsorption capacity of composite was 49.74 mg/g. The thermodynamic parameters revealed that the adsorption process of CV was exothermic and spontaneous in nature. CV adsorption followed the pseudo second order kinetic model. MnFe2O4/clay composite exhibited good CV adsorption capacity and can be used as an alternative adsorbent for the removal of basic dyes from effluents.

Native, acidic pre-treated and composite clay efficiency for the adsorption of dicationic dye in aqueous medium.

Environmental applications of composites have attracted the interests of researchers due to their excellent adsorption efficiency for pollutants. Native, HCl pre-treated clay and MnFe2O4/clay composite were investigated as an adsorbent for removal of methyl green from aqueous solution. The adsorption behaviors of dye onto native, HCl pre-treated and composite clays were studied as a function of contact time, adsorbent dose, pH, initial dye concentration and temperature. Maximum dye adsorption of 44 mg/g was achieved at pH of 8, contact time 40 min, adsorbent dose 0.20 g/L and initial dye concentration of 125 mg/L using clay composite. The Langmuir isotherm and pseudo-second-order kinetic model best explained the methyl green dye adsorption onto clay adsorbents. Thermodynamic parameters revealed the endothermic and spontaneous adsorption nature of dye. From results, it is concluded that clay has potential for adsorbing methyl green and can be used for the removal of dyes from industrial effluents.

Eriobotrya japonica seed biocomposite efficiency for copper adsorption: Isotherms, kinetics, thermodynamic and desorption studies.

Adsorption techniques are widely used to remove pollutants from wastewater; however, composites are gaining more importance due to their excellent adsorption properties. Bentonite composite with Eriobotrya japonica seed was prepared and used for the adsorption of copper (Cu) metal from aqueous media. The process variables such as pH, Cu(II) ions initial concentration, adsorbent dose, contact time and temperature were optimized for maximum Cu(II) adsorption. At pH 5, adsorbent dose 0.1 g, contact time 45 min, Cu(II) ions initial concentration 75 mg/L and temperature 45 °C, maximum Cu(II) adsorption was achieved. Desorption studies revealed that biocomposite is recyclable. Langmuir, Freundlich and Harkins-Jura isotherms as well as pseudo-first and pseudo-second-order kinetics models were applied to understand the adsorption mechanism. Thermodynamic parameters (ΔG(0), ΔH(0) and ΔS(0)) suggest that the adsorption process was spontaneous and endothermic in nature. The pseudo-second-order kinetic model and Langmuir isotherm fitted well to the adsorption data. Results showed that biocomposite was more efficient for Cu(II) adsorption in comparison to individuals native Eriobotrya japonica seed biomass and Na-bentonite.

Forgiving you is hard, but forgetting seems easy: can forgiveness facilitate forgetting?

Forgiveness is considered to play a key role in the maintenance of social relationships, the avoidance of unnecessary conflict, and the ability to move forward with one's life. But why is it that some people find it easier to forgive and forget than others? In the current study, we explored the supposed relationship between forgiveness and forgetting. In an initial session, 30 participants imagined that they were the victim in a series of hypothetical incidents and indicated whether or not they would forgive the transgressor. Following a standard think/no-think procedure, in which participants were trained to think or not to think about some of these incidents, more forgetting was observed for incidents that had been forgiven following no-think instructions compared with either think or baseline instructions. In contrast, no such forgetting effects emerged for incidents that had not previously been forgiven. These findings have implications for goal-directed forgetting and the relationship between forgiveness and memory.

Potential use of low-cost lignocellulosic waste for the removal of direct violet 51 from aqueous solution: equilibrium and breakthrough studies.

An efficient biosorbent, sugarcane bagasse was used in native, HCl-treated, and Na-alginate immobilized form for the removal of Direct Violet 51 dye from aqueous solutions. Batch study was performed to optimize important process parameters, such as pH, contact time, biosorbent dose, initial dye concentration, and temperature. Removal of Direct Violet 51 was found to be favorable at pH 2 with the biosorbent dose of 0.05 g. Biosorption process was found to be exothermic in nature. Maximum dye biosorption (39.6 mg/g) was achieved by using HCl-treated biomass. The pseudo-second-order kinetic and Langmuir adsorption isotherm models showed best fitness to the experimental data. Thermodynamic study was also performed to determine the feasibility of biosorption process. Continuous mode study was performed to optimize the important process parameters, such as bed height, flow rate, and initial dye concentration for maximum removal of Direct Violet 51 dye. The higher bed height, low flow rate, and high initial dye concentration were found to be the better conditions for maximum dye biosorption (17.28 mg/g). The linearized form of the Thomas model equation fitted well to the experimental data. The bed depth service time model was used to express the effect of bed height on breakthrough curves. Characterization of biosorbent was performed by scanning electron microscopy and Fourier transform infrared (FT-IR) analysis. The FT-IR spectral analyses showed the involvement of hydroxyl, carbonyl, and carboxyl groups in biosorption process. These results indicated that sugarcane bagasse biomass could be used as a novel biosorbent for the removal of Direct Violet 51 dye from real textile and related industries.

Advanced oxidation/reduction processes (AO/RPs) for wastewater treatment, current challenges, and future perspectives: a review.

Advanced oxidation/reduction processes (AO/RPs) are considered as effective water treatment technologies and thus could be used to solve the problem of water pollution. These technologies of wastewater treatment involve the production of highly reactive species such as •OH, H•, e-aq, SO4•-, and SO3•-. These radicals can attack the targeted contaminants present in aqueous media and result in their destruction. The efficiency of AO/RPs is highly affected by various operational parameters such as initial concentration of contaminant, solution pH, catalyst amount, intensity of light source, nature of oxidant and reductant used, and the presence of various ionic species in aquatic media. Among AO/RPs, the solar light-based AO/RPs are most widely used nowadays for contaminant removal from aqueous media because of their high environmental friendliness and cost effectiveness. By using these techniques, almost all types of pollutants can be easily removed from aquatic media within short intervals of time, and hence, the problem of water pollution can be solved effectively. This review focuses on various AO/RPs used for wastewater treatment. The effects of different operational parameters that affect the efficiency of these processes toward contaminant removal have been discussed. Besides, challenges and future recommendations are also briefly provided for the researchers in order to improve the efficiency of these processes.

Exploring zeolite-based composites in adsorption and photocatalysis for toxic wastewater treatment: Preparation, mechanisms, and future perspectives.

Water scarcity has become a critical global concern exacerbated by population growth, globalization, and industrial expansion, resulting in the production of wastewater containing a wide array of contaminants. Tackling this challenge necessitates the adoption of innovative materials and technologies for effective wastewater treatment. This review article provides a comprehensive exploration of the preparation, applications, mechanisms, and economic environmental analysis of zeolite-based composites in wastewater treatment. Zeolite, renowned for its versatility and porous nature, is of paramount importance due to its exceptional properties, including high surface area, ion exchange capability, and adsorption capacity. Various synthetic methods for zeolite-based composites are discussed. The utilization of zeolites in wastewater treatment, particularly in adsorption and photocatalysis, is thoroughly investigated. The significance of zeolite in adsorption and its role in the photocatalytic degradation of pollutants are examined, along with its applications in treating volatile organic compounds (VOCs), dye wastewater, oil-field wastewater, and radioactive waste. Mechanisms underlying zeolite-based adsorption and photocatalysis, including physical and chemical adsorption, ion exchange, and surface modification, are elucidated. Additionally, the role of micropores in the adsorption process is explored. Furthermore, the review delves into regeneration and desorption studies of zeolite-based composites, crucial for sustainable wastewater treatment practices. Economic and environmental analyses are conducted to assess the feasibility and sustainability of employing zeolite-based composites in wastewater treatment applications. Future recommendations are provided to guide further research and development in the field of zeolite-based composites, aiming to enhance wastewater treatment efficiency and environmental sustainability. By exploring the latest advancements and insights into zeolite-based nanocomposites, this paper aims to contribute to the development of more efficient and sustainable wastewater treatment strategies. The integration of zeolite-based materials in wastewater treatment processes shows promise for mitigating water pollution and addressing water scarcity challenges, ultimately contributing to environmental preservation and public health protection.

Trends and social aspects in the management and conversion of agricultural residues into valuable resources: A comprehensive approach to counter environmental degradation, food security, and climate change.

The circular economy is essential as it encourages the reuse and recycling of resources while reducing waste, which ultimately helps to reduce environmental pollution and boosts economic efficiency. The current review highlights the management of agricultural and livestock residues and their conversion into valuable resources to combat environmental degradation and improve social well-being. The current trends in converting agricultural residues into useful resources emphasize the social benefits of waste management and conversion. It also emphasizes how waste conversion can reduce environmental degradation and enhance food security. Using agricultural residues can increase soil health and agricultural output while reducing pollution, greenhouse gas emissions, and resource depletion. Promoting sustainable waste-to-resource conversion processes requires a combination of strategies that address technical, economic, social, and environmental aspects. These multiple strategies are highlighted along with prospects and considerations.

Thinking about the consequences: The detrimental role of future thinking on intrapersonal problem-solving in depression.

Despite the fact that depressed individuals encounter a multitude of social problems in daily life, research on social problem-solving has largely been dominated by research on interpersonal problems and there is a paucity of research on intrapersonal problems. Intrapersonal problems are linked to one's subjective psychological functioning and involve managing one's own feelings and emotions pertaining to the self. Given that depressed individuals exhibit impaired emotion regulation, it is possible that their ability to solve intrapersonal problems may be impaired, especially in relation to future thinking. The aim of this study was to investigate whether future thinking, in the form of thinking about the consequences of a problem being resolved or remaining unresolved has an impact on intrapersonal problem-solving in depression. Forty-five depressed and fifty-four non-depressed participants completed a modified version of the means end problem-solving task (MEPS). In the task, participants were presented with a series of intrapersonal problems and were asked to generate consequences of the problems being resolved or remaining unresolved. Participants were then presented with a positive resolution to each of the problems and were asked to solve the problem to achieve the positive resolution. Following a delay, participants were asked to recall all of the consequences initially generated. Overall, depressed individuals generated fewer-relevant means and less effective solutions to problems than non-depressed participants. Depressed individuals also demonstrated impaired intrapersonal problem-solving following the generation of resolved and unresolved consequences, compared to a baseline condition, where no consequences were generated. These findings suggest that future thinking impairs intrapersonal problem-solving and indicates that a more nuanced approach to future thinking and social problem-solving in depression is needed across different real-life problem-solving contexts.

Analysis of Homogeneous/Heterogeneous Reactions in an Electrohydrodynamic Environment Utilizing the Second Law.

In this study, we investigate what happens to entropy in the presence of electrokinetic phenomena. It is speculated that the microchannel has an asymmetrical and slanted configuration. The presence of fluid friction, mixed convection, Joule heating, presence and absence of homogeneity, and a magnetic field are modelled mathematically. It is also emphasized that the diffusion factors of the autocatalyst and the reactants are equal. The governing flow equations are linearized using the Debye-Huckel and lubrication assumptions. The resulting nonlinear couple differential equations are solved using the program's integrated numerical solver, Mathematica. We take a graphical look at the results of homogeneous and heterogeneous reactions and talk about what we see. It has been demonstrated that homogeneous and heterogeneous reaction parameters affect concentration distribution f in different ways. The Eyring-Powell fluid parameters B1 and B2 display an opposite relation with the velocity, temperature, entropy generation number, and Bejan number. The mass Grashof number, the Joule heating parameter, and the viscous dissipation parameter all contribute to the overall increase in fluid temperature and entropy.

Green metal oxides coated biochar nanocomposites preparation and its utilization in vertical flow constructed wetlands for reactive dye removal: Performance and kinetics studies.

Major causes of water pollution in the ecosystem are pollutants such as dyes which are noxious. The present study was based on the synthesis of the green nano-biochar composites from cornstalk and green metal oxide resulting in Copper oxide/biochar, Zinc oxide /biochar, Magnesium oxide/biochar, Manganese oxide/biochar, biochar for removal of dyes combined with the constructed wetland (CW). Biochar Augmentation in constructed wetland systems has improved dye removal efficiency to 95% in order of copper oxide/biochar > Magnesium oxide/biochar > Zinc oxide/biochar > Manganese oxide/biochar > biochar > control (without biochar) respectively in wetlands. It has increased the efficiency of pH by maintaining pH 6.9-7.4, while Total Suspended Solids (TSS) removal efficiency and Dissolved oxygen (DO) increased with the hydraulic retention time of about 7 days for 10 weeks. Chemical oxygen demand (COD) and colour removal efficiency increased with the hydraulic retention time of 12 days for 2 months and there was a low removal efficiency for total dissolved solids (TDS) from control (10.11%) to Copper oxide /biochar (64.44%) and Electrical conductivity (EC) from control (8%) to Copper oxide /biochar (68%) with the hydraulic retention time of about 7 days for 10 weeks. Colour and chemical oxygen demand removal kinetics followed second and first-order kinetic. A significant growth in the plants were also observed. These results proposed the use of agricultural waste-based biochar as part of a constructed wetland substratum can provide enhanced removal of textile dyes. That can be reused.

Assessment of risk factors and preventive measure compliance against COVID-19 among healthcare workers at tertiary care hospital: a retrospective study.

Introduction: SARS-CoV-2 has created a significant challenge to healthcare systems, since the disease has spread rapidly, outweighing hospital capacity and exposing Health Care Workers (HCWs) to the risk of infection. The main objective of this study shows the HCW's self-reported use of Personal Protective Equipment (PPE), symptoms, and exposure to revealed and suspected people during the pandemic, as well as the implementation of infection prevention and control (IPC) guidelines that effectively limit the spread of the infection among healthcare personnel. Method: A single-center retrospective cohort study has been done at a tertiary care hospital. There were 3,651 hospital employees of these 1,890 HCWs and 1,761 nonclinical staff among those who were proven or suspected COVID-19 cases and had symptoms were included. The data was gathered using a standardized self-assessment questionnaire. Information about quarantine protocol and line listing was collected through telephonic conversations. Result: The majority of the participants were males (66%). The average age was 32.1±7.62. Out of 432 HCWs, 32.9% with positive SARS-CoV-2 PCR findings were nurses, 19.2% were doctors, and 47.9% were non-clinical employees from the hospital's inpatient and outpatient departments. 31.5% had a higher-risk exposure, 64.1% had a moderate-risk exposure, and 4.4% of practitioners with COVID-19 had a lower-risk exposure. A statistically significant association was found between COVID-19 disease and adherence to PPE and risk exposure. Conclusion: This study represents the healthcare workers' experience with COVID-19 patients in the early stages of the pandemic and emphasizes the measures required to overcome the problems, however, this study highlights that HCWs are being progressively infected with COVID-19 as a result of inadequate/ inappropriate PPE wear.