Condensed Supramolecular Helices: The Twisted Sisters of DNA.

Condensation of DNA helices into hexagonally packed bundles and toroids represents an intriguing example of functional organization of biological macromolecules at the nanoscale. The condensation models are based on the unique polyelectrolyte features of DNA, however here we could reproduce a DNA-like condensation with supramolecular helices of small chiral molecules, thereby demonstrating that it is a more general phenomenon. We show that the bile salt sodium deoxycholate can form supramolecular helices upon interaction with oppositely charged polyelectrolytes of homopolymer or block copolymers. At higher order, a controlled hexagonal packing of the helices into DNA-like bundles and toroids could be accomplished. The results disclose unknown similarities between covalent and supramolecular non-covalent helical polyelectrolytes, which inspire visionary ideas of constructing supramolecular versions of biological macromolecules. As drug nanocarriers the polymer-bile salt superstructures would get advantage of a complex chirality at molecular and supramolecular levels, whose effect on the nanocarrier assisted drug efficiency is a still unexplored fascinating issue.

The Effect of Number of Arms on the Aggregation Behavior of Thermoresponsive Poly(N-isopropylacrylamide) Star Polymers.

The thermoresponsive nature of aqueous solutions of poly(N-isopropylacrylamide) (PNIPAAM) star polymers containing 2, 3, 4, and 6 arms has been investigated by turbidity, dynamic light scattering, rheology, and rheo-SALS. Simulations of the thermosensitive nature of the single star polymers have also been conducted. Some of the samples form aggregates even at temperatures significantly below the lower critical solution temperature (LCST) of PNIPAAM. Increasing concentration and number of arms promotes associations at low temperatures. When the temperature is raised, there is a competition between size increase due to enhanced aggregation and a size reduction caused by contraction. Monte Carlo simulations show that the single stars contract with increasing temperature, and that this contraction is more pronounced when the number of arms is increased. Some samples exhibit a minimum in the turbidity data after the initial increase at the cloud point. The combined rheology and rheo-SALS data suggest that this is due to a fragmentation of the aggregates followed by re-aggregation at even higher temperatures. Although the 6-arm star polymer aggregates more than the other stars at low temperatures, the more compact structure renders it less prone to aggregation at temperatures above the cloud point.

Effect of Temperature and Ionic Strength on Micellar Aggregates of Oppositely Charged Thermoresponsive Block Copolymer Polyelectrolytes.

The self-assembly of two oppositely charged diblock copolymers that have a common thermosensitive nonionic block of poly(N-isopropylacrylamide) (pNIPAAM) has been investigated. The effect of the mixing ratio and total polymer concentrations on the self-assembly of the components and on the phase stability of the mixtures was studied by dynamic light scattering, electrophoretic mobility, and turbidimetry measurements in water at 20 °C. The effect of the competing electrostatic and hydrophobic interactions on the nanostructure of negatively charged electrostatically self-assembled micelles bearing a pNIPAAM corona was investigated by small-angle X-ray scattering (SAXS). The electrostatic and hydrophobic interactions were controlled independently by tuning the ionic strength (from pure water to 50 mM NaCl) and the temperature (20-50 °C) of the investigated mixtures. The SAXS data could be fitted by a spherical micelle model, which has a smoothly decaying radial profile and a Gaussian star term that describes the internal structure of the micellar structures and possible attractive interactions between the polymer chains. At high temperature, a cluster structure factor was included for describing the formation of bulky clusters of the formed micelles. At low temperature and ionic strength, the formation of micelles with a coacervate core and hydrated pNIPAAM shell was observed. The structural evolution of the self-assembled micelles with increasing ionic strength and temperature could be followed, and finally at high ionic strength and temperature, the formation of inverted micelles with a hydrophobic core and polyelectrolyte shell could be identified.

Block copolymers as bile salt sequestrants: intriguing structures formed in a mixture of an oppositely charged amphiphilic block copolymer and bile salt.

To study the formation and characterize the structure of mixed complexes of oppositely charged block copolymers and surfactants are of great significance for practical applications, e.g., in drug carrier formulations that are based on electrostatically assisted assembly. In this context, biocompatible block copolymers and biosurfactants (like bile salts) are particularly interesting. In this work, we report on the co-assembly in dilute aqueous solution between a cationic poly(N-isopropyl acryl amide) (PNIPAM) diblock copolymer and the oppositely charged bile salt surfactant sodium deoxycholate at ambient temperature. The cryogenic transmission electron microscopy (cryo-TEM) experiments revealed the co-existence of two types of co-assembled complexes of radically different morphology and inner structure. They are formed mainly as a result of the electrostatic attraction between the positively charged copolymer blocks and bile salt anions and highlight the potential of using linear amphiphilic block copolymers as bile salt sequestrants in the treatment of bile acid malabsorption and hypercholesterolemia. The first complex of globular morphology has a coacervate core of deoxycholate anions and charged copolymer blocks surrounded by a PNIPAM corona. The second complex has an intriguing tape-like supramolecular morphology of several micrometer in length that is striped in the direction of the long axis. A model is presented in which the stretched cationic blocks of several block copolymers interact electrostatically with the bile salt molecules that are associated to form a zipper-like structure. The tape is covered on both sides by the PNIPAM chains that stabilize the overall complex in solution. In addition to cryo-TEM, the mixed system was investigated in a range of molar charge fractions at a constant copolymer concentration by static light scattering, small angle X-ray scattering, and electrophoretic mobility measurements.

Effect of PCL end-groups on the self-assembly process of Pluronic in aqueous media.

Understanding self-assembly of amphiphilic copolymers in aqueous solution is an important issue in many areas, e.g., in order to tailor-make carriers for drugs and genes. We have synthesized modified versions of the copolymer of type PEO-PPO-PEO (Pluronic, F127), with short (PCL(5)) or long (PCL(11)) PCL blocks at both ends. Turbidity, dynamic light scattering (DLS), small angle neutron scattering (SANS), and rheology measurements were carried out on dilute aqueous solutions of these polymers to investigate their self-assembly behavior. The DLS results clearly show that both micellization and inter-micellization can be controlled by polymer concentration, temperature, and length of the PCL block. The interplay between unimers, micelles, and clusters of micelles could be monitored and the size and size distribution of the species were determined. The SANS data could be portrayed by a spherical core-shell model at all considered conditions of temperature and concentration for F127 and PCL(5) apart from F127 at the lowest temperature measured. The SANS data for PCL(11) were described by a spherical core-shell model at low temperatures, whereas at elevated temperatures asymmetric sub-structures appeared and a cylindrical core-shell model was employed in the analysis of the data. The appearance of pronounced correlation peaks at elevated temperatures signalizes marked intermicellar interactions. The shear viscosity data revealed a minor shear thinning effect, suggesting that the interchain structures are rather stable and not easily disrupted. The work shows that PCL-modification of Pluronic has a large influence on the self-assembly process and on the final structure of the assemblies.

System with embedded drug release and nanoparticle degradation sensor showing efficient rifampicin delivery into macrophages.

We have developed a biodegradable, biocompatible system for the delivery of the antituberculotic antibiotic rifampicin with a built-in drug release and nanoparticle degradation fluorescence sensor. Polymer nanoparticles based on poly(ethylene oxide) monomethyl ether-block-poly(ε-caprolactone) were noncovalently loaded with rifampicin, a combination that, to best of our knowledge, was not previously described in the literature, which showed significant benefits. The nanoparticles contain a Förster resonance energy transfer (FRET) system that allows real-time assessment of drug release not only in vitro, but also in living macrophages where the mycobacteria typically reside as hard-to-kill intracellular parasites. The fluorophore also enables in situ monitoring of the enzymatic nanoparticle degradation in the macrophages. We show that the nanoparticles are efficiently taken up by macrophages, where they are very quickly associated with the lysosomal compartment. After drug release, the nanoparticles in the cmacrophages are enzymatically degraded, with half-life 88±11 min.

Rheological Study and Molecular Dynamics Simulation of Biopolymer Blend Thermogels of Tunable Strength.

The temperature-induced gelation of chitosan/glycerophosphate (Chs/GP) systems through physical interactions has shown great potential for various biomedical applications. In the present work, hydroxyethyl cellulose (HEC) was added to the thermosensitive Chs/GP solution to improve the mechanical strength and gel properties of the incipient Chs/HEC/GP gel in comparison with the Chs/GP hydrogel at body temperature. The physical features of the macromolecular complexes formed by the synergistic interaction between chitosan and hydroxyethyl cellulose in the presence of ß-glycerophosphate disodium salt solution have been studied essentially from a rheological point of view. The temperature and time sweep rheological characterizations of the thermogelling systems revealed that the sol-gel transition temperature of the Chs/HEC/GP blends is equal to 37 °C at neutral pH; with increasing HEC content in the solutions, more compact networks with considerably improved gel strength are formed without influencing the gelation time. The formed hydrogel matrix has enough mechanical integrity and adequate strength for using it as injectable in situ forming matrices for biomedical applications. The classical Winter-Chambon (W-C) and Fredrickson-Larson (F-L) theories were applied to determine the gel point. In view of the obtained results, it is shown that the F-L theory can be employed as a robust and less tedious method than the W-C approach to precisely determine the gel point in these systems. At the end, molecular simulation studies were conducted by using ab initio quantum mechanics (QM) calculations carried out on Chs and HEC models, and molecular dynamics (MD) simulations of solvated Chs/HEC blend systems showed the binding behavior of Chs/HEC polymers. Analyses of interaction energy, radial distribution function, and hydrogen bonding from simulation studies strongly supported the experimental results; they all disclosed that hydrogen-bond formation between Chs moieties with regard to HEC chains plays an important role for the stabilization of the complexes.

Poly(lactide-co-glycolide)-rifampicin nanoparticles efficiently clear Mycobacterium bovis BCG infection in macrophages and remain membrane-bound in phago-lysosomes.

Nanoparticles (NPs) are increasingly used as biodegradable vehicles to selectively deliver therapeutic agents such as drugs or antigens to cells. The most widely used vehicle for this purpose is based on copolymers of lactic acid and glycolic acid (PLGA) and has been extensively used in experiments aimed at delivering antibiotics against Mycobacterium tuberculosis in animal models of tuberculosis. Here, we describe fabrication of PLGA NPs containing either a high concentration of rifampicin or detectable levels of the green fluorescent dye, coumarin-6. Our goal here was twofold: first to resolve the controversial issue of whether, after phagocytic uptake, PLGA NPs remain membrane-bound or whether they escape into the cytoplasm, as has been widely claimed. Second, we sought to make NPs that enclosed sufficient rifampicin to efficiently clear macrophages of infection with Mycobacterium bovis BCG. Using fluorescence microscopy and immuno-electron microscopy, in combination with markers for lysosomes, we show that BCG bacteria, as expected, localized to early phagosomes, but that at least 90% of PLGA particles were targeted to, and remained in, low pH, hydrolase-rich phago-lysosomes. Our data collectively argue that PLGA NPs remain membrane-enclosed in macrophages for at least 13 days and degrade slowly. Importantly, provided that the NPs are fabricated with sufficient antibiotic, one dose given after infection is sufficient to efficiently clear the BCG infection after 9-12 days of treatment, as shown by estimates of the number of bacterial colonies in vitro.

pH-responsive nano carriers for doxorubicin delivery.

PURPOSE: The aim of this study was to design stimuli-responsive nanocarriers for anti-cancer drug delivery. For this purpose, doxorubicin (DOX)-loaded, polysebacic anhydride (PSA) based nanocapsules (NC) were combined with pH-sensitive poly (L-histidine) (PLH). METHOD: PSA nano-carriers were first loaded with DOX and were coated with poly L-histidine to introduce pH sensitivity. The PLH-coated NCs were then covered with polyethylene glycol (PEG) to reduce macrophage uptake. The drug release profile from this system was examined in two different buffer solutions prepared as acidic (pH5) and physiological (pH 7.4) media. The physical and chemical properties of the nanocapsules were characterized by Fourier transform infrared spectroscopy (FTIR), dynamic light scattering (DLS), ultraviolet and visible absorption spectroscopy (UV-VIS), and scanning electron microscopy (SEM). In vitro studies of the prepared nanocapsules were conducted in MDA-MB-231 breast cancer cells. RESULTS: The results obtained by SEM and DLS revealed that nanocapsules have spherical morphology with an average size of 230 nm. Prepared pH sensitive nanocapsules exhibited pH-dependent drug release profile and promising intracellular release of drug. PEGylation of nanoparticles significantly prevented macrophage uptake compared to non-PEGylated particles.

Poly(sebacic anhydride) nanocapsules as carriers: effects of preparation parameters on properties and release of doxorubicin.

Poly(sebacic anhydride) (PSA) is a promising polymer for the production of drug delivery vehicles. The aim of this work is to study the effect of preparation parameters on the quality of the nanoparticles. In this study, doxorubicin (DOX)-loaded PSA nanocapsules were prepared by an emulsion method. Effects of factors such as type of organic solvent, co-solute (surfactant) and its concentration on drug-loading efficiency, particle size and size distribution, morphology and release profile were examined to gain insight in the preparation and stability of nanostructures. Particles with sizes in the range of 218-1198 nm were prepared. The smallest particles with a narrow size distribution were prepared by using polyvinyl alcohol as a co-solute and dichloromethane as a solvent. Efficiency and intracellular release of doxorubicin from the formulated particles were studied on MDA-MB-231 cells. It was observed that DOX-loaded PSA particles can diffuse into the cells and intracellular antitumour activity is directly related to the released amount of drug from the PSA nanocapsules.

Application of thermoresponsive PNIPAAM-b-PAMPTMA diblock copolymers in siRNA delivery.

Gene knockdown has emerged as an important tool for cancer gene therapy as well as for viral infections and dominantly inherited genetic disorders. The generation of suitable siRNA delivery systems poses some challenges, namely, to avoid nuclease degradation, to surpass the cytoplasmic membrane, and to release the nucleic acids into the cytosol. Aiming at evaluating the ability of thermoresponsive block copolymers formed by units of N-isopropylacrylamide and of (3-acrylamidopropyl)trimethylammonium chloride to efficiently deliver siRNAs, an extensive study was performed with four different copolymers using a human fibrosarcoma cell line as cell model. The silencing ability and cytotoxicity of the generated copolymer-based siRNA delivery systems were found to be dependent on the cloud point of the polymer, which corresponds to the transition temperature at which the aggregation or precipitation of the polymer molecules becomes thermodynamically more favorable than their solubilization. In the present study, a system capable of delivering siRNAs efficiently, specifically and without presenting relevant cytotoxicity, even in the presence of serum, was developed. Confocal fluorescence experiments showed that the ability of the generated systems to silence the target gene is related to some extent to nucleic acid internalization, being also dependent on polymer/siRNA dissociation at 37 °C. Thus, a delicate balance between nucleic acid internalization and intracellular release must be met in order to reach an ideal knockdown efficiency. The special features and potential for manipulation of the N-isopropylacrylamide-based copolymers make them suitable materials for the design and synthesis of new and promising siRNA delivery systems.

Novel polyurethane-based ionene nanoparticles electrostatically stabilized with hyaluronic acid for effective gene therapy.

Gene therapy is considered to be a valuable strategy for effective cancer treatment. However, the development of effective delivery systems that can specifically deliver gene materials, such as siRNA to tumor tissues plays a critical role in cancer therapy. In the present study, we have developed a novel complex that is based on an electrostatic interaction between cationic polyurethane ionene (CPUI) nanoparticles and an anti-signal transducer and activator of transcription 3 (STAT3) siRNA. For active targeting, hyaluronic acid (HA) was used to coat the complexes, which significantly reduced the cytotoxicity of the blank nanocarriers while demonstrating high transport efficiency of the siRNA via the CD44-mediated endocytosis pathway in MCF-7 breast cancer cells. The targeted nanocarriers (HA/CPUI/siRNA) showed significantly higher cellular internalization in flow cytometry and confocal microscopy compared with the non-targeted system (CPUI/siRNA). In addition, the incorporation of HA on the surface of the complexes resulted in significantly greater suppression of the STAT3 gene compared to the corresponding non-targeted formulation. Whole-body fluorescence images showed more significant tumor accumulation of the targeted nanocarriers in 4T1 breast tumor-bearing mice. Therefore, HA/CPUI/siRNA nanocarriers are an interesting option for the siRNA-targeted treatment of breast cancer cells.

Tailoring the amphiphilicity and self-assembly of thermosensitive polymers: end-capped PEG-PNIPAAM block copolymers.

In this work we report on the synthesis and self-assembly of a thermo-sensitive block copolymer system of n-octadecyl-poly(ethylene glycol)-block-poly(N-isopropylacrylamide), abbreviated as C18-PEGn-b-PNIPAAMm. We present a facile synthetic strategy for obtaining highly tunable thermo-responsive block copolymers starting from commercial PEG-based surfactants (Brij®) or a C18 precursor and conjugating with PNIPAAM via an Atom Transfer Radical Polymerization (ATRP) protocol. The self-assembly and detailed nanostructure were thoroughly investigated in aqueous solutions using both small-angle X-ray and neutron scattering (SAXS/SANS) combined with turbidity measurements. The results show that the system forms rather well defined classical micellar structures at room temperature that first undergo a collapse, followed by inter-micellar aggregation upon increasing the temperature. For the pure C18-PNIPAAM system, however, rather ill-defined micelles were formed, demonstrating the important role of PEG in regulating the nanostructure and the stability. It is found that the PEG content can be used as a convenient parameter to regulate the thermoresponse, i.e., the onset of collapse and aggregation. A detailed theoretical modeling analysis of the SAXS/SANS data shows that the system forms typical core-shell micellar structures. Interestingly, no evidence of back folding, where PEG allows PNIPAAM to form part of the C18 core, can be found upon crossing the lower critical solution temperature (LCST). This might be attributed to the entropic penalty of folding a polymer chain and/or enthalpic incompatibility between the blocks. The results show that by appropriately varying the balance between the hydrophobic and hydrophilic content, i.e. the amphiphilicity, tunable thermoresponsive micellar structures can be effectively designed. By means of SAXS/SANS we are able to follow the response on the nanoscale. These results thus give considerable insight into thermo-responsive micellar systems and provide guidelines as to how these systems can be tailor-made and designed. This is expected to be of considerable interest for potential applications such as in nanomedicine where an accurate and tunable thermoresponse is required.

Design of novel polyurethane-based ionene nanocarriers for cancer therapy: Synthesis, in-vitro, and in-vivo studies.

New strategies for constructing versatile nanocarriers are needed for cancer therapy to overcome the multiple challenges of targeted delivery. This work explores the advantages of polyurethane with main-chain quaternary ammonium salt moieties (ionene) as a novel carrier for targeted drug delivery. We have developed a novel cationic soybean oil-based polyurethane ionene nanocarrier (CPUI) that can act as an effective anticancer agent and efficiently deliver the anticancer drug 5-fluorouracil (5FU). We also report a potential anticancer drug delivery system targeting the folate receptor. In vitro experiments with blank CPUI carriers on the 4T1 (mouse breast cancer cell line) and the NIH-3T3 (mouse fibroblast cell line) revealed high cytotoxicity for the cancer cells but only low cytotoxicity for the normal fibroblast cells. The CPUI nanoparticles were readily loaded with 5FU (5FU-CPUI) in water using electrostatic interactions between the cationic quaternary ammonium groups of ionene and the anionic 5FU. The in vivo study in mice with tumors showed that the blank CPUI carriers significantly inhibited tumor growth, even more than the free drug (5FU). The inhibitory effect on tumor growth was slightly enhanced when the carriers were loaded with 5FU. The prepared nanoparticles had a high loading capacity of 41.8 %. Further enhancement of the inhibitory effect was observed when folic acid (FA) was added as a targeting moiety to the system via ion exchange with the bromine counterion of the quaternary ammonium moieties. The results suggest that the efficacy of FA-CPUI-5FU nanoparticles as vehicles for drug delivery can be enhanced via folate receptor (FR) mediated endocytosis in 4T1 cells and these novel nanocarriers may provide a potential platform for effective targeted drug delivery to tumor tissue and breast cancer therapy in the clinic.

Interactions in Aqueous Mixtures of Cationic Hydroxyethyl Cellulose and Different Anionic Bile Salts.

It is known that the reduction of blood cholesterol can be accomplished through foods containing a large number of dietary fibers; this process is partially related to the binding of bile salt to fibers. To gain new insights into the interactions between dietary fibers and bile salts, this study investigates the interactions between cationic hydroxyethyl cellulose (catHEC) and sodium deoxycholate (NaDC) or sodium cholate (NaC), which have a similar structure. Turbidity measurements reveal strong interactions between catHEC and NaDC, and under some conditions, macroscopic phase separation occurs. In contrast, the interactions with NaC are weak. At a catHEC concentration of 2 wt %, incipient phase separation is approached at concentrations of NaC and NaDC of 32.5 and 19.3 mM, respectively. The rheological results show strong interactions and a prominent viscosification effect for the catHEC/NaDC system but only moderate interactions for the catHEC/NaC system. Both cryogenic transmission electron microscopy and small-angle X-ray scattering results display fundamental structural differences between the two systems, which may explain the stronger interactions in the presence of NaDC. The surmise is that the extended structures formed in the presence of NaDC can easily form connections and entanglements in the network.

Waterborne polyurethane magnetic nanomicelles with magnetically governed functions for breast cancer therapy.

Drug delivery strategies aim to maximize a drug's therapeutic efficiency by increasing the drug's concentration at the target site while minimizing delivery to off-target tissues. There is a great deal of interest in using magnetic nanoparticles in combination with applied magnetic fields to selectively control drug accumulation and release in target tissue while minimizing effects on other tissues. In this study, a magnetic targeted drug delivery system based on waterborne polyurethane nanomicelles was prepared by encapsulating hydrophobic doxorubicin (DOX, model drug) and hydrophobic oleic acid-superparamagnetic nanoparticles (SPION-OA) into the hydrophobic core of waterborne polyurethane micelles (CPUM) using the solvent evaporation method. The prepared drug-loaded magnetomicelles (CPUM-DOX-SPION) had a spherical shape with an average diameter of 158 nm. The magnetomicelles showed superparamagnetic properties with excellent magnetic resonance imaging (MRI) contrast effects and T2 relaxation in vitro. In the absence and presence of a magnetic field, the cytocompatibility and cellular uptake of the samples were assessed by MTT assay and flow cytometry, respectively, and the cells were imaged with a confocal microscope. Application of the magnetic field increased cellular cytotoxicity and cellular uptake in association with improved DOX delivery. In addition, the in vivo study of tumor volume showed that tumor growth of the mice group treated with CPUM-DOX-SPION in the presence of an external magnetic field was significantly retarded, with no apparent loss of body weight, compared with the same magnetomicelles in the absence of the magnetic field and with free DOX at the same dose. Moreover, the in vivo MRI experiment indicated the potential of these magnetomicelles as a probe in MRI diagnosis for tumor targeting, and the results showed that magnetically guided delivery of CPUM-SPION magnetomicelles into tumors could significantly improve the targeting efficacy. All the results suggest that the prepared novel magnetomicelles will be promising theranostic systems for effective magnetically guided delivery of chemotherapeutic agents and image-guided personalized medicine.

Synthesis and Characterization of a Thermoresponsive Copolymer with an LCST-UCST-like Behavior and Exhibiting Crystallization.

In this work, the diblock copolymer methoxy-poly(ethylene glycol)-block-poly(ε-caprolactone) (MPEG-b-PCL) was synthesized with a block composition that allows this polymer in aqueous media to possess both an upper critical solution temperature (UCST) and a lower critical solution temperature (LCST) over a limited temperature interval. The value of the UCST, associated with crystallization of the PCL-block, depended on heating (H) or cooling (C) of the sample and was found to be CPUCSTH = 32 °C and CPUCSTC = 23 °C, respectively. The LCST was not affected by the heating or cooling scans; assumed a value of 52 °C (CPLCSTH = CPLCSTC). At intermediate temperatures (e.g., 45 °C), dynamic light scattering (DLS), small-angle X-ray scattering (SAXS), and cryogenic transmission electron microscopy (cryo-TEM) showed that the solution consisted of a large population of spherical core-shell particles and some self-assembled rodlike objects. At low temperatures (below 32 °C), differential scanning calorimetry (DSC) and wide-angle X-ray scattering (WAXS) in combination with SAXS disclosed the formation of crystals with a cylindrical core-shell structure. Cryo-TEM supported a thread-like appearance of the self-assembled polymer chains. At temperatures above 52 °C, incipient phase separation took place and large aggregation complexes of amorphous morphology were formed. This work provides insight into the intricate interplay between UCST and LCST and the type of structures formed at these conditions in aqueous solutions of MPEG-b-PCL diblock copolymers.

Structure and interactions of charged triblock copolymers studied by small-angle X-ray scattering: dependence on temperature and charge screening.

A series of thermo-responsive cationic triblock copolymers composed of methoxy-poly(ethylene glycol) (MPEG, hydrophilic), poly(N-isopropylacrylamide) (PNIPAAM, temperature sensitive), and poly((3-acrylamidopropyl) trimethyl ammonium chloride) (PN(+), cationic) has been investigated as a function of temperature and ionic strength. In the MPEG-b-PNIPAAM-b-PN(+) copolymers, the MPEG block length is constant, and the lengths of the PNIPAAM and PN(+) blocks are varied. The solubility of the PNIPAAM block decreases with increasing temperature, and the triblock copolymer thus provides the possibilities of studying micelles with both neutral and charged blocks in the micelle corona as well as the interplay between these two blocks as the electrostatic interactions are varied by addition of salt. Investigation of the systems by densitometry and small-angle X-ray scattering (SAXS) in a temperature range from 20 to 70 °C gave detailed information on the behavior both below and above the critical micelle temperature (CMT). A clear effect of the addition of salt is observed in both the apparent partial specific volume, obtained from the densitometry measurements, and the SAXS data. Below the CMT, the single polymers can be described as Gaussian chains, for which the repulsive interchain interactions, originating from the charged PN(+) block, have to be taken into account in salt-free aqueous solution. Increasing the salt concentration of the solution to 30 mM NaCl leads to an increase in the apparent partial specific volume, and the electrostatic repulsive interchain interactions between the single polymers vanish. Raising the temperature results in micelle formation, except for the copolymer with only 20 NIPAAM units. The SAXS data show that the polymer with the medium PNIPAAM block length forms spherical micelles, whereas the polymer with the longest PNIPAAM block forms cylindrical micelles. Increasing the temperature further above the CMT results in an increase in the micellar aggregation number for both of the polymers forming spherical and cylindrical micelles. The addition of salt to the solution also influences the aggregates formed above the CMT. Overall, the micelles formed in the salt solution have a smaller cross-section radius than those in aqueous solution without added salt.

Cationic poly(N-isopropylacrylamide) block copolymer adsorption investigated by dual polarization interferometry and lattice mean-field theory.

A series of cationic diblock copolymers, poly(N-isopropylacrylamide)(48)-block-poly((3-acrylamidopropyl)trimethylammonium chloride)(X), abbreviated as PNIPAAM(48)-b-PAMPTMA(+)(X) (X = 0, 6, 10, 14, and 20), has been synthesized, and their adsorption onto silicon oxynitride from aqueous solution has been investigated using dual polarization interferometry. The polymer adsorption was modeled by using a lattice mean-field theory, and a satisfactory consistency between theory and experiments was found in terms of surface excess and layer thickness. Both theory and experiments show that the adsorption is limited by steric repulsion for X < X(max) and by electrostatic interactions for X > X(max). Modeling demonstrates that significant surface charge regulation occurs due to adsorption. Both the nonionic and cationic block exhibit nonelectrostatic affinity to silicon oxynitride and thus contribute to the driving force for adsorption, and modeling is used for clarifying how changes in the nonelectrostatic affinity affects the surface excess. The segments of the nonionic and cationic blocks seem less segregated when both have a nonelectrostatic affinity for the surface compared to the case where the segments had no surface affinity. Adsorption kinetics was investigated experimentally. Two kinetic regimes were observed: the adsorption rate is initially controlled by the mass transfer rate to the surface and at higher coverage is limited by the attachment rate.

Reliability of the balanced inventory for spinal disorders, a questionnaire for evaluation of outcomes in patients with various spinal disorders.

STUDY DESIGN: An intrapatient reliability study of the previously validated 18-item questionnaire, the Balanced Inventory for Spinal disorders (BIS), in patients referred for planned spinal surgery. Statistical evaluation of the test-retest assessments was performed by a rank-based method that allows for separate analyses of the systematic and individual components of an observed disagreement. OBJECTIVE: To evaluate the intrapatient reliability and the art of disagreement, when present, in assessing the extent to which pain affects perceived physical health, social life, mental health, and quality of life according to the BIS. For comparative reasons corresponding items in Short-Form-36 (SF-36) and Oswestry Disability Index (ODI) were also evaluated. SUMMARY OF BACKGROUND DATA: The questionnaires were filled in by 101 patients the evening before going to the clinic for planned spinal surgery and the following evening at the clinic. RESULTS: The percentage agreement in test-retest assessments of the items varied from 52% to 84%. The important items of pain, physical activities, social life, overall mental health, and quality of life showed high levels of reliability. An intrapatient disagreement of more than 1 category was seen in 4 items of mental health and in physical health, only. The observed individual variability and the significant systematic decrease on the second occasion could be explained by the fact that the patients were at the hospital on the retest occasion. The variation in percentage agreements found, and the different reasons for disagreement in items speak against that memory alone could have caused the retest assessments. CONCLUSION: The comprehensive evaluation of test-retest reliability showed that the test-retest assessments on the BIS could be regarded as reliable, and the measures of reliability of the BIS items were on the same levels as for corresponding items of the SF-36 and the ODI questionnaires.