RESUMEN
Refrigeration is of vital importance for modern society-for example, for food storage and air conditioning-and 25 to 30 per cent of the world's electricity is consumed for refrigeration1. Current refrigeration technology mostly involves the conventional vapour compression cycle, but the materials used in this technology are of growing environmental concern because of their large global warming potential2. As a promising alternative, refrigeration technologies based on solid-state caloric effects have been attracting attention in recent decades3-5. However, their application is restricted by the limited performance of current caloric materials, owing to small isothermal entropy changes and large driving magnetic fields. Here we report colossal barocaloric effects (CBCEs) (barocaloric effects are cooling effects of pressure-induced phase transitions) in a class of disordered solids called plastic crystals. The obtained entropy changes in a representative plastic crystal, neopentylglycol, are about 389 joules per kilogram per kelvin near room temperature. Pressure-dependent neutron scattering measurements reveal that CBCEs in plastic crystals can be attributed to the combination of extensive molecular orientational disorder, giant compressibility and highly anharmonic lattice dynamics of these materials. Our study establishes the microscopic mechanism of CBCEs in plastic crystals and paves the way to next-generation solid-state refrigeration technologies.
RESUMEN
This study investigates mechanochemical synthesis and cation-disordering mechanism of wurtzite-type Li3VO4 (LVO), highlighting its promise as a high-performance anode material for lithium-ion batteries and hybrid supercapacitors. Mechanochemical treatment of pristine LVO using a high-energy ball mill results in a "pure cation-disordered" LVO phase, allowing for meticulous analysis of cation arrangement. The X-ray and neutron diffraction study demonstrates progressive loss of order in LVO crystal with increasing milling duration. High-resolution transmission electron microscopy reveals disrupted lattice fringes, indicating cationic misalignment. Pair-distribution function analysis confirms loss of cation arrangements and the presence of short-range order. Combination of these multiple analytical techniques achieves a comprehensive understanding of cation regularity and clearly demonstrates order/disorder dichotomy in cation-disordered materials, ranging from short (<8 Å) to middle-long range (8-30 Å), using an integrated superstructure model of the cation-disordered LVO crystals. Electrochemical testing reveals that mechanochemically treated LVO exhibits superior rate capability, with a 70% capacity retention at a high current density of 50C-rate. Lithium diffusion coefficient measurements demonstrate enhanced lithium-ion mobility in the mechanochemically treated LVO, attributed to cation-disordering effect. These findings provide valuable insights into mechanochemical cation-disordering in LVO, presenting its potential as an efficient anode material for lithium-ion-based electrochemical energy storage.
RESUMEN
Delivering inherently stable lithium-ion batteries is a key challenge. Electrochemical lithium insertion and extraction often severely alters the electrode crystal chemistry, and this contributes to degradation with electrochemical cycling. Moreover, electrodes do not act in isolation, and this can be difficult to manage, especially in all-solid-state batteries. Therefore, discovering materials that can reversibly insert and extract large quantities of the charge carrier (Li+), that is, high capacity, with inherent stability during electrochemical cycles is necessary. Here lithium-excess vanadium oxides with a disordered rocksalt structure are examined as high-capacity and long-life positive electrode materials. Nanosized Li8/7Ti2/7V4/7O2 in optimized liquid electrolytes deliver a large reversible capacity of over 300 mAh g-1 with two-electron V3+/V5+ cationic redox, reaching 750 Wh kg-1 versus metallic lithium. Critically, highly reversible Li storage and no capacity fading for 400 cycles were observed in all-solid-state batteries with a sulfide-based solid electrolyte. Operando synchrotron X-ray diffraction combined with high-precision dilatometry reveals excellent reversibility and a near dimensionally invariable character during electrochemical cycling, which is associated with reversible vanadium migration on lithiation and delithiation. This work demonstrates an example of an electrode/electrolyte couple that produces high-capacity and long-life batteries enabled by multi-electron transition metal redox with a structure that is near invariant during cycling.
RESUMEN
Oxidative recycling of metals is crucial for a circular economy, encompassing the preservation of natural resources, the reduction of energy consumption, and the mitigation of environmental impacts and greenhouse gas emissions associated with traditional mining and processing. Low-melting gallium trichloride appears to be a promising oxidative solvent for rare-earth metals, transuranium elements, platinum, pnictogens, and chalcogens. Typically, oxidative dissolution with GaCl3 occurs at relatively low temperatures over a few days, assuming the presence of tetrahedral Ga-Cl entities. While supercritical gallium trichloride holds the potential for advanced recycling, little is known about its structure and viscosity. Using high-energy X-ray diffraction and multiscale modeling, which includes first-principles simulations, we have revealed a dual molecular nature of supercritical gallium trichloride, consisting of tetrahedral dimers and flat trigonal monomers. The molecular geometry can be precisely tuned by adjusting the temperature and pressure, optimizing the recycling process for specific metals. The derived viscosity, consistent with the reported results in the vicinity of melting, decreases by a factor of 100 above the critical temperature, enabling fast molecular diffusion, and efficient recycling kinetics.
RESUMEN
Understanding disordered structure is difficult due to insufficient information in experimental data. Here, we overcome this issue by using a combination of diffraction and simulation to investigate oxygen packing and network topology in glassy (g-) and liquid (l-) MgO-SiO2 based on a comparison with the crystalline topology. We find that packing of oxygen atoms in Mg2SiO4 is larger than that in MgSiO3, and that of the glasses is larger than that of the liquids. Moreover, topological analysis suggests that topological similarity between crystalline (c)- and g-(l-) Mg2SiO4 is the signature of low glass-forming ability (GFA), and high GFA g-(l-) MgSiO3 shows a unique glass topology, which is different from c-MgSiO3. We also find that the lowest unoccupied molecular orbital (LUMO) is a free electron-like state at a void site of magnesium atom arising from decreased oxygen coordination, which is far away from crystalline oxides in which LUMO is occupied by oxygen's 3s orbital state in g- and l-MgO-SiO2, suggesting that electronic structure does not play an important role to determine GFA. We finally concluded the GFA of MgO-SiO2 binary is dominated by the atomic structure in terms of network topology.
RESUMEN
Deciphering the three-dimensional (3D) insight into nanocatalyst surfaces at the atomic level is crucial to understanding catalytic reaction mechanisms and developing high-performance catalysts. Nevertheless, better understanding the inherent insufficiency of a long-range ordered lattice in nanocatalysts is a big challenge. In this work, we report the local structure of Pd nanocatalysts, which is beneficial for demonstrating the shape-structure-adsorption relationship in acetylene hydrogenation. The 5.27 nm spherical Pd catalyst (Pdsph) shows an ethylene selectivity of 88% at complete acetylene conversion, which is much higher than those of the Pd octahedron and Pd cube and superior to other reported monometallic Pd nanocatalysts so far. By virtue of the local structure revelation combined with the atomic pair distribution function (PDF) and reverse Monte Carlo (RMC) simulation, the atomic surface distribution of the unique compressed strain of Pd-Pd pairs in Pdsph was revealed. Density functional theory calculations verified the obvious weakening of the ethylene adsorption energy on account of the surface strain of Pdsph. It is the main factor to avoid the over-hydrogenation of acetylene. The present work, entailing shape-induced surface strain manipulation and atomic 3D insight, opens a new path to understand and optimize chemical activity and selectivity in the heterogeneous catalysis process.
RESUMEN
Choline chloride (ChCl)-carboxylic acid deep eutectic solvents (DESs) are promising green solvents for lignocellulose pretreatment, de-aromatization of gasoline, battery recycling, etc. Micro interactions determine the physical properties of DESs, such as melting point, viscosity, and solubility. In the present work, the structures of choline chloride/formic acid (FA) and choline chloride/acetic acid (AA) with a 1 : 2 molar ratio were investigated by wide-angle X-ray scattering, empirical potential structure refinement (EPSR) and density functional theory (DFT) calculations. Reduced density gradient (RDG) and atoms in molecules (AIM) show that hydrogen bonds and carbon-hydrogen bonds exist in choline chloride-carboxylic acid DESs. EPSR modelling based on the gauche choline cation model reveals the interactions between DES components. Cl- plays an important role in maintaining the structural stability of choline chloride-carboxylic acid DESs, by participating in the formation of hydrogen bonds, carbon-hydrogen bonds, and acting as a bridge for indirect interaction, including between choline cations and carboxylic acid molecules. Molecular size and steric hindrance elucidate the formation of different sizes of clusters (≤10 molecules) and chains (≤5 molecules) in DESs. Spatial density functions show that formic acid and acetic acid have a strong orientational preference. The strong interaction between Ch+ and FA and the existence of the Cl- bridge significantly destroyed the lattice structure of ChCl, resulting in the melting point of ChClFA (<-90 °C) being lower than that of ChClAA (-8.98 °C). This fundamental understanding of the structure will enable the development of green, economical, and nontoxic choline chloride-carboxylic acid DESs.
RESUMEN
Alkaline earth metal cations are ubiquitously present in natural zeolites but less exploited in synthetic zeolites due to their low solubility in water, and hence it remains elusive how they contribute to zeolite formation. Herein, harmotome, a PHI-type zeolite with Ba2+, is readily synthesized from a Ba-containing aluminosilicate glass. This glass-to-zeolite transformation process, in particular the structure-regulating role of Ba2+, is investigated by anomalous X-ray scattering and high-energy X-ray total scattering techniques. The results demonstrate that the steady Ba2+-aluminosilicate interactions not only help prevent the precipitation of barium species under alkaline synthetic conditions, but also dictate the local structures with distinct interatomic distances between the Ba2+ and the surrounding aluminosilicate species throughout the transformation process, which lead to the successful formation of harmotome without detectable impurities. This study highlights the usefulness of the comprehensive X-ray scattering techniques in revealing the formation scheme of the zeolites containing specific metal species. In addition, a promising alternative approach to design and synthesize zeolites with unique compositions and topologies by using well-crafted glasses with suitable metal cation dopants is demonstrated.
RESUMEN
The crystallization mechanism of zeolites remains unclarified to date because of lack of effective techniques in characterizing the local structures of amorphous precursors under synthetic conditions. Herein, in situ high-energy X-ray total scattering measurement with pair distribution function analysis is performed throughout the hydrothermal synthesis of SSZ-13 zeolite to investigate the amorphous-to-crystalline transformation at the sub-nano level in real time. Ordered four-membered rings (4Rs) are dominantly formed during the induction period, prior to the significant increase in the number of symmetric six- and eight-membered rings (6Rs and 8Rs) in the crystal growth stage. These preformed ordered 4Rs contribute to the formation of d6r and cha composite building units containing 6Rs and 8Rs with the assistance of the organic structure-directing agent, leading to the construction of embryonic zeolite crystallites, which facilitate the crystal growth through a particle attachment pathway. This work enriches the toolbox for better understanding the crystallization pathway of zeolites.
Asunto(s)
Zeolitas , Zeolitas/química , Rayos X , Difracción de Rayos X , Cristalización/métodos , Fenómenos FísicosRESUMEN
The revelation of the atomic 3D structure of sub-5 nm bimetal nanocatalysts challenges the limitations of conventional methods. Notably, the identification of the cooperative relationship between the active sites and nearby coordination environment during catalytic reactions depends on the stereo distribution of local phases and chemical composition within a short range. As a model nanocatalyst in our investigation, we studied the ordered PtFe bimetals in hydrogen evolution reactions (HER). By combining pair distribution functions with reverse Monte Carlo, local-range phase symmetry, chemical composition, and atom distribution were determined. The segregation of local phase segments as disordered Pt-rich A1 and Pt3Fe L12 phases can be attributed to the marked improvement of HER activity and stability in Pt56Fe44. Following the etching of the outermost-surface Fe, the remaining disordered segregation offered a large number of active Pt sites for discharge and electrochemical desorption reactions. It resulted in local-bonding Pt pairs that made it easier for adsorbed hydrogen atoms to recombine. The current research will provide structural insight into the local range for bimetal nanocatalysts and be valuable for the creation of new, low-cost nanocatalysts.
RESUMEN
High-entropy alloy nanoparticles (HEA NPs) emerged as catalysts with superior performances that are not shown in monometallic catalysts. Although many kinds of synthesis techniques of HEA NPs have been developed recently, synthesizing HEA NPs with ultrasmall particle size and narrow size distribution remains challenging because most of the reported synthesis methods require high temperatures that accelerate particle growth. This work provides a new methodology for the fabrication of ultrasmall and homogeneous HEA NPs using a continuous-flow reactor with a liquid-phase reduction method. We successfully synthesized ultrasmall IrPdPtRhRu HEA NPs (1.32 ± 0.41 nm), theoretically each consisting of approximately 50 atoms. This average size is the smallest ever reported for HEA NPs. All five elements are homogeneously mixed at the atomic level in each particle. The obtained HEA NPs marked a significantly high hydrogen evolution reaction (HER) activity with a very small 6 mV overpotential at 10 mA/cm-2 in acid, which is one-third of the overpotential of commercial Pt/C. In addition, although mass production of HEA NPs is still difficult, this flow synthesis can provide high productivity with high reproducibility, which is more energy efficient and suitable for mass production. Therefore, this study reports the 1 nm-sized HEA NPs with remarkably high HER activity and establishes a platform for the production of ultrasmall and homogeneous HEA NPs.
Asunto(s)
Aleaciones , Nanopartículas , Catálisis , Entropía , Reproducibilidad de los ResultadosRESUMEN
Intensive research is underway to further enhance the performance of lithium-ion batteries (LIBs). To increase the capacity of positive electrode materials, Li-rich layered oxides (LLO) are attracting attention but have not yet been put to practical use. The structural mechanisms through which LLO materials exhibit higher capacity than conventional materials remain unclear because their disordered phases make it difficult to obtain structural information by conventional analysis. The X-ray total scattering analysis reveals a disordered structure consisting of metal ions in octahedral and tetrahedral sites of Li layers as a result of cation mixing after the extraction of Li ions. Metal ions in octahedral sites act as rigid pillars. The metal ions move to the tetrahedral site of the Li layer, which functions as a Li-layer pillar during Li extraction, and returns to the metal site during Li insertion, facilitating Li diffusion as an adaptive pillar. Adaptive pillars are the specific structural features that differ from those of the conventional layered materials, and their effects are responsible for the high capacity of LLO materials. An essential understanding of the pillar effects will contribute to design guidelines for intercalation-type positive electrodes for next-generation LIBs.
RESUMEN
Data-driven approaches in materials science demand the collection of large amounts of data on the target materials at synchrotron beamlines. To accurately gather suitable experimental data, it is essential to establish fully automated measurement systems to reduce the workload of the beamline staff. Moreover, the recent COVID-19 pandemic has further emphasized the necessity of automated and/or remote measurements at synchrotron beamlines. Here, the installation of a new sample changer combined with a high-temperature furnace and a fully automated alignment system on beamline BL04B2 at SPring-8 is reported. The system allows X-ray total scattering measurements of up to 21 samples at different temperatures (from room temperature to 1200°C) to be conducted without any human assistance.
Asunto(s)
COVID-19 , Robótica , Humanos , Pandemias , SARS-CoV-2 , Sincrotrones , Temperatura , Rayos XRESUMEN
Anhydrous silicophosphoric acid glass with an approximate composition of H5 Si2 P9 O29 was synthesized and its thermal and proton-conducting properties were characterized. Despite exhibiting a glass transition at 192 °C, the supercooled liquid could be handled as a solid up to 280 °C owing to its high viscosity. The glass and its melt exhibited proton conduction with a proton transport number of â¼1. Although covalent O-H bonds were weakened by relatively strong hydrogen bonding, the proton conductivity (4×10-4 â S cm-1 at 276 °C) was considerably lower than that of phosphoric acid. The high viscosity of the melt was due to the tight cross-linking of phosphate ion chains by six-fold-coordinated Si atoms. The low proton conductivity was attributed to the trapping of positively charged proton carriers around anionic SiO6 units (expressed as (SiO6/2 )2- ) to compensate for the negative charges.
Asunto(s)
Vidrio , Protones , Conductividad Eléctrica , Vidrio/química , Enlace de HidrógenoRESUMEN
Two-dimensional negative thermal expansion (NTE) is achieved in a tetragonal oxalate-based metal-organic framework (MOF), CdZrSr(C2O4)4, within a temperature range from 123 to 398 K [space group I4Ì m2, αa = -2.4(7) M K-1, αc = 11.3(3) M K-1, and αV = 6.4(1) M K-1]. By combining variable-temperature X-ray diffraction, a high-resolution synchrotron X-ray pair distribution function, and thermogravimetry-differential scanning calorimetry, we shows that NTE within the ab plane derives from the oriented rotation of an oxalate ligand in zigzag chains (-CdO8-ox-ZrO8-ox-)∞. That is simplified to the Zr atom rotating with an unchanged Zr···Cd distance as the radius, which also gives rise to the deformation of a hingelike connection along the c axis and results in its positive thermal expansion. By virtue of the facile and low-cost oxalate ligand, the present NTE MOF may show application prospects in the future.
RESUMEN
Interzeolite conversion, which refers to the synthesis of zeolites using a pre-made zeolite as the starting material, has enabled promising outcomes that could not be easily achieved by the conventional synthesis from a mixture of amorphous aluminum and silicon sources. Understanding the mechanism of interzeolite conversion is of particular interest to exploit this synthesis route for the preparation of tailor-made zeolites as well as the discovery of new structures. It has been assumed that the structural similarity between the starting zeolite and the target one is crucial to a successful interzeolite conversion. Nevertheless, an image as to how one type of zeolite evolves into another one remains unclear. In this work, a series of dealuminated FAU zeolites were created through acid leaching and employed as the starting zeolites in the synthesis of AEI zeolite under various conditions. This experimental design allowed us to create a comprehensive diagram of the interzeolite conversion from FAU to AEI as well as to figure out the key factors that enable this kinetically favourable crystallization pathway. Our results revealed different scenarios of the interzeolite conversion from FAU to AEI and pinpointed the importance of the structure of the starting FAU in determining the synthesis outcomes. A prior dealumination was proven effective to modify the structure of the initial FAU zeolite and consequently facilitate its conversion to the AEI zeolite. In addition, this strategy allowed us to directly transfer the knowledge obtained from the interzeolite conversion to a successful synthesis of the AEI zeolite from dealuminated amorphous aluminosilicate precursors. These results offer new insights to the design and fabrication of zeolites via the interzeolite conversion as well as to the understandings of the crystallization mechanisms.
RESUMEN
How is the orientation of molecular liquids ordered on cooling? What are the basic structures of molecular glasses, e.g., close to the crystalline structure or some special structures such as icosahedral cluster? These are long-standing questions in liquid and glass physics. We have constructed a novel cryostat to prepare simple molecular glasses by vapor deposition and performed in situ synchrotron radiation x-ray diffraction experiments. The glassy state of a simple molecule CS2, which cannot be vitrified by normal liquid quenching, was successfully prepared with this instrument, and its diffraction data were collected in a wide Q-range of 0.16-25.7 Å-1 with a high-energy diffractometer at BL04B2, SPring-8. The diffraction data of liquid CS2 were also recorded in a wide temperature range of 160-300 K. These diffraction data were analyzed with molecular dynamics simulations and reverse Monte Carlo modelings to investigate orientational correlation. From the obtained 3D structure models, the orientational correlation between neighboring CS2 molecules was investigated quantitatively as a function of temperature. At room temperature, the parallel and T-shaped arrangements are preferred for the nearest neighbor correlation. On cooling, these arrangements are developed gradually, and its rate became prominent below the melting temperature (162 K). In the glassy state, the slipped-parallel arrangement is dominant as well as the T-shaped arrangement. Both arrangements appear in the CS2 crystal, indicating that the structure of glassy CS2 is close to that of crystalline CS2.
RESUMEN
The crystallization of zeolites, a disorder-to-order transformation of aluminosilicates, has not been thoroughly understood because the nucleation events in the amorphous matrix are difficult to recognize from the diverse structural changes, especially for the dense hydrogel systems. Therefore, relationships between the synthesis conditions, the generated amorphous species, and the crystallization behavior of zeolites remain unclear. Herein, by comparatively investigating the structural evolution of the aluminosilicate matrix in a dense hydrogel system when different Si reactants (fumed silica and silicate solution) are employed, we demonstrate that the reactivity of the reactants and the kinetics of the condensation reaction is critical to the formation of short-range order in an amorphous matrix, which greatly influences the nucleation frequency of zeolites. It was revealed that an amorphous solid containing plentiful Al-rich four-membered rings and Si-rich six-membered rings could be produced when fumed silica gradually reacted with sodium aluminate solution at 80 °C. It is considered that the interaction between these rings promotes the construction of the essential building units of zeolite X (FAU). In contrast, a complex aluminosilicate matrix was formed immediately when sodium silicate solution was mixed with sodium aluminate solution due to the intense condensation reaction. Furthermore, this complex matrix became more stable when the reactant mixture was hydrothermally treated at 80 °C, which significantly impedes the crystallization process. Aging the reactant mixture at ambient temperature before heating, instead, facilitated the formation of short-range order in the amorphous matrix, which increases the nucleation frequency of zeolites.
RESUMEN
Sodium niobate (NaNbO3) attracts attention for its great potential in a variety of applications, for instance, due to its unique optical properties. Still, optimization of its synthetic procedures is hard due to the lack of understanding of the formation mechanism under hydrothermal conditions. Through in situ X-ray diffraction, hydrothermal synthesis of NaNbO3 was observed in real time, enabling the investigation of the reaction kinetics and mechanisms with respect to temperature and NaOH concentration and the resulting effect on the product crystallite size and structure. Several intermediate phases were observed, and the relationship between them, depending on temperature, time, and NaOH concentration, was established. The reaction mechanism involved a gradual change of the local structure of the solid Nb2O5 precursor upon suspending it in NaOH solutions. Heating gave a full transformation of the precursor to HNa7Nb6O19·15H2O, which destabilized before new polyoxoniobates appeared, whose structure depended on the NaOH concentration. Following these polyoxoniobates, Na2Nb2O6·H2O formed, which dehydrated at temperatures ≥285 °C, before converting to the final phase, NaNbO3. The total reaction rate increased with decreasing NaOH concentration and increasing temperature. Two distinctly different growth regimes for NaNbO3 were observed, depending on the observed phase evolution, for temperatures below and above ≈285 °C. Below this temperature, the growth of NaNbO3 was independent of the reaction temperature and the NaOH concentration, while for temperatures ≥285 °C, the temperature-dependent crystallite size showed the characteristics of a typical dissolution-precipitation mechanism.
RESUMEN
Controlling the shape and size of nanostructured materials has been a topic of interest in the field of material science for decades. In this work, the ferroelectric material Srx Ba1-x Nb2 O6 (x=0.32-0.82, SBN) was prepared by hydrothermal synthesis, and the morphology is controllably changed from cube-shaped to hollow-ended structures based on a fundamental understanding of the precursor chemistry. Synchrotron X-ray total scattering and PDF analysis was used to reveal the structure of the Nb-acid precursor, showing Lindqvist-like motifs. The changing growth mechanism, from layer-by-layer growth forming cubes to hopper-growth giving hollow-ended structures, is attributed to differences in supersaturation. Transmission electron microscopy revealed an inhomogeneous composition along the length of the hollow-ended particles, which is explained by preferential formation of the high entropy composition, SBN33, at the initial stages of particle nucleation and growth.