Legal regulation of ventilation rates in homes in Europe 2010-2022: Evolution and comparison study regarding Covid-19 recommendations.

The airborne transmission of SARS-CoV-2, the virus that causes Covid-19 disease, has been recognized as an essential route of contagion, so adequate ventilation is vital indoors. For this reason, the research goal focuses on carrying out the study and evolutionary and comparison analysis of the regulation of ventilation rates in dwellings in Europe (2010-2022) and on determining whether modifications are necessary for the said regulation based on the recommendations of competent international organizations. To do this, the methodology followed initially starts from the study carried out in 2010 by Christine Dimitroulopoulou, in which the existing regulation in various European countries regarding ventilation in dwellings was studied. Once this study has been analysed, it continues to update and compare the regulation of the different European countries cited in the said work, detecting during the process if a modification is necessary based on the recommendations indicated by international organizations such as the WHO or ECDC. The results and conclusions indicate that few countries have significantly changed their ventilation rates. Although the existing ones may be admissible, requiring controlled ventilation in the different regulations would be convenient.

Evaluating the potential of adaptive comfort approach using historic data to reduce energy consumption in buildings in southern Spain.

The application of adaptive comfort models is among the determinant factors to reduce greenhouse gas emissions in the building sector. This research studies the region of Andalusia (south of Spain). A cluster analysis is applied to 786 Andalusian municipalities, and 4 groups are established according to the potential of adaptive strategies. A town is chosen from each group, and an hourly specific study is conducted for the last 20 years, as well as a daily study of the old time series by using an artificial neural network based on the existing climate data. The possibility of application of the EN 16798-1:2019 standard during the days of the year is analysed, as well as the possibilities of using natural ventilation and the possibility of using adaptive setpoint temperatures in comparison with both 3 fixed heating temperatures and 3 fixed cooling temperatures by considering the energy saving. The results to apply the standard ranged 69.0 and 100% of the days of each year. The possibilities of natural ventilation considered were greater than 10% of the hours of the year in all the assumptions. The energy saving of cooling degrees reveals a greater potential in the area studied than that of heating degrees; this tendency is supported by the study of old temporary series which are part of the climate variation predicted throughout the 21st century.

In-situ disinfection of wastes generated in dwellings by utilizing ozone for their safe incorporation into the recycling chain.

The Covid-19 pandemic has certainly changed behaviour patterns in many aspects of life, such as the management of solid wastes inside residential spaces. The goal of this research work is to study an ozone generator device as a disinfection and sterilization tool for these wastes in dwellings themselves, thus re-establishing the selective collection to take them back to the recycling chain. In addition, an approach to the risk verification is made. The methodology is based on an experimentation with a device designed to be as cheap as possible. A room like a bedroom is used as a test bed to apply the device, but with no people inside the room to avoid risks. The results show that the device is feasible, concluding that risks are acceptable if its use is correct and appropriate equipment is available to be applied and controlled, all without prejudice of the rigorous control by the competent authorities that approve its use.

Slag Substitution as a Cementing Material in Concrete: Mechanical, Physical and Environmental Properties.

A circular economy is a current tenet that must be implemented in the field of construction. That would imply the study of the possibilities of the use of waste generated, for obtaining materials the used in construction as replacements for the raw material used. One of these possibilities is the substitution of the cement by slag, which contributes to the reduction of cement consumption, decreasing CO2 emissions, while solving a waste management problem. In the present paper, different types of concrete made by cement substitution with different type of slags have been studied in order to evaluate the properties of these materials. Cement is replaced by slag from different steel mills, both blast furnace and ladle furnace slag. The percentages of slag substitution by cement are 30%, 40% and 50% by weight. Mechanical, physical and environmental properties have been evaluated. Compressive and flexural strength have been analysed as the main mechanical properties. As far as physical properties go, density and porosity tests were be reported and analysed, and from an environmental point of view, a leachate study was performed. It has been found that some kinds of slag (blast furnace slag) are very suitable as substitutes for cement, providing properties above those of the reference concrete, while other types (ladle furnace slag) could be valid for non-structural applications, contributing in both cases to a circular economy.