Performance of high-efficiency UV-C LEDs in water disinfection: Experimental, life cycle assessment, and economic analysis of different operational scenarios.

The widespread use of low or medium pressure mercury lamps in UV-C water disinfection should consider recent advances in UV-C LED lamps that offer a more sustainable approach and avoid its main drawbacks. The type of water and the mode of operation are critical when deciding on the treatment technology to be used. Therefore, this study investigates the potential application of UV-C LED disinfection technology in terms of kinetics, environmental assessment, and economic analysis for two scenarios: the continuous disinfection of a wastewater treatment plant (WWTP), and disinfection of harvested rainwater (RWH) in a residential household that operates intermittently. Experiments are conducted using both the new UV-C LED system and the conventional mercury lamp to disinfect real wastewater. Removal of total coliforms and Escherichia coli bacteria, with concentrations of approximately 105 and 104 CFU per 100 mL has been followed to assess the performance of both types of UV-C lamps. The experimental study provides kinetic parameters that have been further used in the environmental assessment conducted from a life cycle perspective. Additionally, considering the significant role of electricity consumption, a preliminary economic analysis has been conducted. The results indicate that first-order kinetic constants of pathogens removal with UV-C LEDs achieve 1.4 times higher values than Hg lamp. Regarding the environmental and economic assessment, for disinfection systems operating continuously, LEDs result in environmental impacts 5 times higher than Hg lamp in most categories, indicating that Hg lamps offer a viable option both from economic and environmental point of view. However, for installations with intermittent operation, LEDs emerge as the most competitive alternative, due to their ability to be turned on and off without affecting their lifespan. This study shows that UV-C LED lamps hold promise to replace conventional mercury lamps in a near future.

Insights into the Binding Mode of Lipid A to the Anti-lipopolysaccharide Factor ALFPm3 from Penaeus monodon: An In Silico Study through MD Simulations.

The globally expanding threat of antibiotic resistance calls for the development of new strategies for abating Gram-negative bacterial infections. The use of extracorporeal blood cleansing devices with affinity sorbents to selectively capture bacterial lipopolysaccharide (LPS), which is the major constituent of Gram-negative bacterial outer membranes and the responsible agent for eliciting an exacerbated innate immune response in the host during infection, has received outstanding interest. For that purpose, molecules that bind tightly to LPS are required to functionalize the affinity sorbents. Particularly, anti-LPS factors (ALFs) are promising LPS-sequestrating molecules. Hence, in this work, molecular dynamics (MD) simulations are used to investigate the interaction mechanism and binding pose of the ALF isoform 3 from Penaeus monodon (ALFPm3), which is referred to as "AL3" for the sake of simplicity, and lipid A (LA, the component of LPS that represents its endotoxic principle). We concluded that hydrophobic interactions are responsible for AL3-LA binding and that LA binds to AL3 within the protein cavity, where it buries its aliphatic tails, whereas the negatively charged phosphate groups are exposed to the medium. AL3 residues that are key for its interaction with LA were identified, and their conservation in other ALFs (specifically Lys39 and Tyr49) was also analyzed. Additionally, based on the MD-derived results, we provide a picture of the possible AL3-LA interaction mechanism. Finally, an in vitro validation of the in silico predictions was performed. Overall, the insights gained from this work can guide the design of novel therapeutics for treating sepsis, since they may be significantly valuable for designing LPS-sequestrating molecules that could functionalize affinity sorbents to be used for extracorporeal blood detoxification.

Fighting Against Bacterial Lipopolysaccharide-Caused Infections through Molecular Dynamics Simulations: A Review.

Lipopolysaccharide (LPS) is the primary component of the outer leaflet of Gram-negative bacterial outer membranes. LPS elicits an overwhelming immune response during infection, which can lead to life-threatening sepsis or septic shock for which no suitable treatment is available so far. As a result of the worldwide expanding multidrug-resistant bacteria, the occurrence and frequency of sepsis are expected to increase; thus, there is an urge to develop novel strategies for treating bacterial infections. In this regard, gaining an in-depth understanding about the ability of LPS to both stimulate the host immune system and interact with several molecules is crucial for fighting against LPS-caused infections and allowing for the rational design of novel antisepsis drugs, vaccines and LPS sequestration and detection methods. Molecular dynamics (MD) simulations, which are understood as being a computational microscope, have proven to be of significant value to understand LPS-related phenomena, driving and optimizing experimental research studies. In this work, a comprehensive review on the methods that can be combined with MD simulations, recently applied in LPS research, is provided. We focus especially on both enhanced sampling methods, which enable the exploration of more complex systems and access to larger time scales, and free energy calculation approaches. Thereby, apart from outlining several strategies for surmounting LPS-caused infections, this work reports the current state-of-the-art of the methods applied with MD simulations for moving a step forward in the development of such strategies.

Biochemical interactions between LPS and LPS-binding molecules.

Lipopolysaccharide (LPS), the major component of the outer membrane of Gram-negative bacteria, often pose a serious risk not only when delivered in the bloodstream but also in air, the environment and several industrial fields such as pharmaceutics or food. LPS is constituted of three regions; the O-specific chain, the core region and the lipid A, which is the responsible segment of the toxicity. Previous literature dealt with the study of lipid A, its potential ligands as well as the mechanisms of Lipid A interactions that, among other applications, establish the basis for detection methods such as Limulus Amebocyte Lysate (LAL) assays and emerging biosensoring techniques. However, quantifying LPS binding affinity is an urgent need that still requires thorough studies. In this context, this work reviews the molecules that bind LPS, highlighting quantitative affinity parameters. Moreover, state of the art methods to analyze the affinity and kinetics of lipid-ligand interactions are also reviewed and different techniques have been briefly described. Thus, first, we review existing information on LPS ligands, classifying them into three main groups and targeting the comparison of molecules in terms of their interaction affinities and, second, we establish the basis for further research aimed at the development of effective methods for LPS detection and removal.

Formation and manipulation of ferrofluid droplets with magnetic fields in a microdevice: a numerical parametric study.

We present a numerical model that describes the microfluidic generation and manipulation of ferrofluid droplets under an external magnetic field. We developed a numerical Computational Fluid Dynamics (CFD) analysis for predicting and optimizing continuous flow generation and processing of ferrofluid droplets with and without the presence of a permanent magnet. More specifically, we explore the dynamics of oil-based ferrofluid droplets within an aqueous continuous phase under an external inhomogeneous magnetic field. The developed model determines the effect of the magnetic field on the droplet generation, which is carried out in a flow-focusing geometry, and its sorting in T-junction channels. Three-channel depths (25 µm, 30 µm, and 40 µm) were investigated to study droplet deformation under magnetic forces. Among the three, the 30 µm channel depth showed the most consistent droplet production for the studied range of flow rates. Ferrofluids with different loadings of magnetic nanoparticles were used to observe the behavior for different ratios of magnetic and hydrodynamic forces. Our results show that the effect of these factors on droplet size and generation rate can be tuned and optimized to produce consistent droplet generation and sorting. This approach involves fully coupled magnetic-fluid mechanics models and can predict critical details of the process including droplet size, shape, trajectory, dispensing rate, and the perturbation of the fluid co-flow for different flow rates. The model enables better understanding of the physical phenomena involved in continuous droplet processing and allows efficient parametric analysis and optimization.

Continuous-Flow Separation of Magnetic Particles from Biofluids: How Does the Microdevice Geometry Determine the Separation Performance?

The use of functionalized magnetic particles for the detection or separation of multiple chemicals and biomolecules from biofluids continues to attract significant attention. After their incubation with the targeted substances, the beads can be magnetically recovered to perform analysis or diagnostic tests. Particle recovery with permanent magnets in continuous-flow microdevices has gathered great attention in the last decade due to the multiple advantages of microfluidics. As such, great efforts have been made to determine the magnetic and fluidic conditions for achieving complete particle capture; however, less attention has been paid to the effect of the channel geometry on the system performance, although it is key for designing systems that simultaneously provide high particle recovery and flow rates. Herein, we address the optimization of Y-Y-shaped microchannels, where magnetic beads are separated from blood and collected into a buffer stream by applying an external magnetic field. The influence of several geometrical features (namely cross section shape, thickness, length, and volume) on both bead recovery and system throughput is studied. For that purpose, we employ an experimentally validated Computational Fluid Dynamics (CFD) numerical model that considers the dominant forces acting on the beads during separation. Our results indicate that rectangular, long devices display the best performance as they deliver high particle recovery and high throughput. Thus, this methodology could be applied to the rational design of lab-on-a-chip devices for any magnetically driven purification, enrichment or isolation.

Critical review on the mechanistic photolytic and photocatalytic degradation of triclosan.

The environmentally extended presence of triclosan, TCS, component of many pharmaceutical and personal care products, and its known persistent character have awoke the scientific and social concern leading to the study of effective remediation techniques. Advanced oxidation techniques stand out for the effectiveness in degrading many persistent compounds, and as a result, they have been addressed by many researchers. However, the powerful oxidation media might lead to the formation of undesirable by-products, concern that has also been widely addressed. With regard to the presence of TCS, photolytic and photocatalytic processes provide a very effective degradation yield and rate, with a large number of reports addressing its removal from different environmental matrices. But currently, there is no clear understanding of the mechanisms involved and the routes responsible for the formation of degradation products. Thus, this work presents an exhaustive and critical analysis of the state of the art related to the photo-degradation of TCS, with special focus on the formation of oxidation by-products, on the phenomena responsible and on the influence of operation variables. This report aims at offering valuable information to researchers dealing with this environmentally relevant problem.

Hereditary breast and ovarian cancer in Andalusian families: a genetic population study.

BACKGROUND: The BRCA1/2 mutation profile varies in Spain according to the geographical area studied. The mutational profile of BRCA1/2 in families at risk for hereditary breast and ovarian cancer has not so far been reported in Andalusia (southern Spain). METHODS: We analysed BRCA1/2 germline mutations in 562 high-risk cases with breast and/or ovarian cancer from Andalusian families from 2010 to 2015. RESULTS: Among the 562 cases, 120 (21.4%) carried a germline pathogenic mutation in BRCA1/2; 50 in BRCA1 (41.7%) and 70 in BRCA2 (58.3%). We detected 67 distinct mutations (29 in BRCA1 and 38 in BRCA2), of which 3 in BRCA1 (c.845C > A, c.1222_1223delAC, c.2527delA) and 5 in BRCA2 (c.293 T > G, c.5558_5559delGT, c.6034delT, c.6650_6654delAAGAT, c.6652delG) had not been previously described. The most frequent mutations in BRCA1 were c.5078_5080delCTG (10%) and c.5123C > A (10%), and in BRCA2 they were c.9018C > A (14%) and c.5720_5723delCTCT (8%). We identified 5 variants of unknown significance (VUS), all in BRCA2 (c.5836 T > C, c.6323G > T, c.9501 + 3A > T, c.8022_8030delGATAATGGA, c.10186A > C). We detected 76 polymorphisms (31 in BRCA1, 45 in BRCA2) not associated with breast cancer risk. CONCLUSIONS: This is the first study reporting the mutational profile of BRCA1/2 in Andalusia. We identified 21.4% of patients harbouring BRCA1/2 mutations, 58.3% of them in BRCA2. We also characterized the clinical data, mutational profile, VUS and haplotype profile.

Significance, evolution and recent advances in adsorption technology, materials and processes for desalination, water softening and salt removal.

Desalination and softening of sea, brackish, and ground water are becoming increasingly important solutions to overcome water shortage challenges. Various technologies have been developed for salt removal from water resources including multi-stage flash, multi-effect distillation, ion exchange, reverse osmosis, nanofiltration, electrodialysis, as well as adsorption. Recently, removal of solutes by adsorption onto selective adsorbents has shown promising perspectives. Different types of adsorbents such as zeolites, carbon nanotubes (CNTs), activated carbons, graphenes, magnetic adsorbents, and low-cost adsorbents (natural materials, industrial by-products and wastes, bio-sorbents, and biopolymer) have been synthesized and examined for salt removal from aqueous solutions. It is obvious from literature that the existing adsorbents have good potentials for desalination and water softening. Besides, nano-adsorbents have desirable surface area and adsorption capacity, though are not found at economically viable prices and still have challenges in recovery and reuse. On the other hand, natural and modified adsorbents seem to be efficient alternatives for this application compared to other types of adsorbents due to their availability and low cost. Some novel adsorbents are also emerging. Generally, there are a few issues such as low selectivity and adsorption capacity, process efficiency, complexity in preparation or synthesis, and problems associated to recovery and reuse that require considerable improvements in research and process development. Moreover, large-scale applications of sorbents and their practical utility need to be evaluated for possible commercialization and scale up.

Performance of electrochemical oxidation and photocatalysis in terms of kinetics and energy consumption. New insights into the p-cresol degradation.

This work reports the comparative performance of two Advanced Oxidation Processes (AOPs), electrochemical oxidation and photocatalysis, as individual technological alternatives for the treatment of effluents containing p-cresol. First, the influence of operating parameters in the oxidation and mineralization yield was carried out together with kinetic analysis. Boron Doped Diamond (BDD), RuO2 and Pt as anodic materials, Na2SO4 and NaCl as supporting electrolytes and different current densities were evaluated in electrochemical oxidation whereas the effect of TiO2 concentration and radiation was studied in the photocatalytic degradation. Then, the parameter Electrical Energy per Order (EEO) was calculated to compare the energy consumption in both AOPs, concluding that under the studied conditions the electrochemical treatment with BDD, Na2SO4 and 125 A m-2 showed the best energy efficiency, with an EEO of 5.83 kW h m-3 order-1 for p-cresol and 58.05 kW h m-3 order-1 for DOC removal, respectively.

Arsenic and fluoride contaminated groundwaters: A review of current technologies for contaminants removal.

Chronic contamination of groundwaters by both arsenic (As) and fluoride (F) is frequently observed around the world, which has severely affected millions of people. Fluoride and As are introduced into groundwaters by several sources such as water-rock interactions, anthropogenic activities, and groundwater recharge. Coexistence of these pollutants can have adverse effects due to synergistic and/or antagonistic mechanisms leading to uncertain and complicated health effects, including cancer. Many developing countries are beset with the problem of F and As laden waters, with no affordable technologies to provide clean water supply. The technologies available for the simultaneous removal are akin to chemical treatment, adsorption and membrane processes. However, the presence of competing ions such as phosphate, silicate, nitrate, chloride, carbonate, and sulfate affect the removal efficiency. Highly efficient, low-cost and sustainable technology which could be used by rural populations is of utmost importance for simultaneous removal of both pollutants. This can be realized by using readily available low cost materials coupled with proper disposal units. Synthesis of inexpensive and highly selective nanoadsorbents or nanofunctionalized membranes is required along with encapsulation units to isolate the toxicant loaded materials to avoid their re-entry in aquifers. A vast number of reviews have been published periodically on removal of As or F alone. However, there is a dearth of literature on the simultaneous removal of both. This review critically analyzes this important issue and considers strategies for their removal and safe disposal.

Photodegradation kinetics and halogens release of the emerging concern pollutants dexamethasone and S-metolachlor on TiO2/rGO composites.

This work studies the photocatalytic degradation of solutions containing 0.11 mM of a glucocorticoid (dexamethasone, DEX) and 0.11 mM of an herbicide (S-metolachlor, MTLC), organohalogenated compounds containing fluorine and chlorine atoms in their molecules, respectively. To treat 1 L volume, a mass of 0.5 g of TiO2/rGO composite in suspension has been used as photocatalyst, irradiated with UV-A LEDs with 200 W m-2 of irradiance. MTLC is partially adsorbed on the surface of the catalyst, while DEX is not adsorbed, showing different degradation kinetics. The halogen ions released into the solution from the breakage of the parent molecules, F- and Cl- respectively, were analysed. In the case of MTLC, the released Cl- followed two different kinetic trends, being faster, and with a rate that matched the rate of MTLC disappearance, the part corresponding to non-adsorbed MTLC. In the experiments with DEX solutions a different behaviour was observed; the released F- in the photocatalytic degradation was partially adsorbed on the catalyst surface, but the adsorption capacity decreased with the use of the photocatalyst in consecutive cycles until the solubilised F- matched the degraded concentration of DEX. Furthermore, the mass balance between the degraded contaminant and the solubilised halogen anion, for both contaminants, allowed to conclude the absence of halogenated intermediates under the final operating conditions, that is a remarkable outcome in water remediation processes.

Quantitative assessment of the formation of polychlorinated derivatives, PCDD/Fs, in the electrochemical oxidation of 2-chlorophenol as function of the electrolyte type.

The electrochemical degradation of 2-chlorophenol (2-CP) on boron-doped diamond (BDD) anodes was carried out using two electrolytes, NaCl and Na2SO4. Both electrolytes supported complete mineralization of 2-CP, but faster rates of degradation were observed in NaCl. After 4 h of oxidation, the total organic carbon (TOC) balance neared 100% with Na2SO4 for identifiable compounds, whereas 4 mM of TOC remained unidentified with NaCl. Since chlorophenols are known to be precursors of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs), a rigorous assessment of intermediate products was carried out. When near complete mineralization was achieved, the use of NaCl resulted in the concentration of total PCDD/Fs increasing 2.68 × 10(4) times compared to the untreated sample, and to toxicity values several times higher than the maximum level established by U.S. Environmental Protection Agency for water ingestion. When Na2SO4 was used, the increase in total PCDD/Fs concentration was 134 times lower than with NaCl and there was no significant 2,3,7,8-PCDD/Fs formation. Thus, we emphasize the importance of electrolyte selection in electro-oxidation processes, especially when PCDD/Fs precursors are initially present or may be formed in the treated water samples.

Fast and reliable analysis of pH-responsive nanocarriers for drug delivery using microfluidic tools.

During the last decades, there has been growing interest in the application of functionalized mesoporous nanomaterials as stimuli-responsive carriers for drug delivery. However, at present there is not a standardized methodology to evaluate their performance. The limitations of the different techniques reported in literature give rise to the necessity for new, simple, and cost-effective alternatives. This work constitutes a step forward in the development of advanced in vitro procedures for testing the behavior of nanocarriers, proposing a novel microfluidic platform. To test the capacity of the reported tool, the performance of amino-functionalized MCM-41 nanoparticles has been assessed. These materials show a pH-responsive mechanism, which prevents the drug release at acidic conditions, maximizing its distribution at neutral pH, thus, the selected release medium mimicked gastrointestinal conditions. As a first approximation, the delivery of Ru(bipy)32+ was evaluated, proving the advantages of the proposed microfluidic system: i) continuous flow of particles and media, ii) rigorous control of the residence time, temperature and pH, iii) enhanced mixing, iv) possibility to simulate different human body conditions and, v) possible integration with the continuous synthesis of nanocarriers. Finally, the microfluidic tool was used to analyze the delivery of the anti-inflammatory drug ibuprofen.

Formation of polychlorinated dibenzo-p-dioxins and furans (PCDD/Fs) in the electrochemical oxidation of polluted waters with pharmaceuticals used against COVID-19.

The COVID-19 pandemic has produced a huge impact on our lives, increasing the consumption of certain pharmaceuticals, and with this, contributing to the intensification of their presence in wastewater and in the environment. This situation demands the implementation of efficient remediation technologies, among them, electrochemical oxidation (ELOX) is one the most applied. This work studies the application of ELOX with the aim of eliminate pharmaceuticals used in the fight against COVID-19, assessing its degradation rate, as well as the risk of formation of toxic trace by-products, such as unintentional POPs like polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs). To this end, model solutions containing 10 mg L-1 of dexamethasone (DEX), paracetamol (PAR), amoxicillin (AMX), and sertraline (STR) with two different electrolytes (NaCl and Na2SO4) have been evaluated. However, electrochemical systems that contain chloride ions in solution together with PCDD/Fs precursor molecules may lead to the formation of these highly toxic by-products. So, PCDD/Fs were quantified under conditions of complete degradation of the drugs. Furthermore, the presence of PCDD/Fs precursors such as chlorophenols was determined, as well as the role of Cl-, Cl• and SO 4 • - radicals in the formation of the by-products and PCDD/Fs. The maximum measured concentration of PCDD/Fs was around 2700 pg L-1 for the amoxicillin case in NaCl medium. The obtained results emphasise the importance of not underestimating the potential formation of these highly toxic trace by-products, in addition to the correct selection of oxidation processes and operation variables, in order to avoid final higher toxicity in the medium.

Resistance of Ion Exchange Membranes in Aqueous Mixtures of Monovalent and Divalent Ions and the Effect on Reverse Electrodialysis.

Salinity gradient energy has gained attention in recent years as a renewable energy source, especially employing reverse electrodialysis technology (RED), which is based on the role of ion exchange membranes. In this context, many efforts have been developed by researchers from all over the world to advance the knowledge of this green source of energy. However, the influence of divalent ions on the performance of the technology has not been deeply studied. Basically, divalent ions are responsible for an increased membrane resistance and, therefore, for a decrease in voltage. This work focuses on the estimation of the resistance of the RED membrane working with water flows containing divalent ions, both theoretically by combining the one-thread model with the Donnan exclusion theory for the gel phase, as well as the experimental evaluation with Fumatech membranes FAS-50, FKS-50, FAS-PET-75, and FKS-PET-75. Furthermore, simulated results have been compared to data recently reported with different membranes. Besides, the influence of membrane resistance on the overall performance of reverse electrodialysis technology is evaluated to understand the impact of divalent ions in energy generation. Results reflect a minor effect of sulfate on the gross power in comparison to the effect of calcium and magnesium ions. Thus, this work takes a step forward in the knowledge of reverse electrodialysis technology and the extraction of salinity gradient energy by advancing the influence of divalent ions on energy recovery.

Optimized Copper-Based Microfeathers for Glucose Detection.

Diabetes is expected to rise substantially by 2045, prompting extensive research into accessible glucose electrochemical sensors, especially those based on non-enzymatic materials. In this context, advancing the knowledge of stable metal-based compounds as alternatives to non-enzymatic sensors becomes a scientific challenge. Nonetheless, these materials have encountered difficulties in maintaining stable responses under physiological conditions. This work aims to advance knowledge related to the synthesis and characterization of copper-based electrodes for glucose detection. The microelectrode presented here exhibits a wide linear range and a sensitivity of 1009 µA∙cm-2∙mM-1, overperfoming the results reported in literature so far. This electrode material has also demonstrated outstanding results in terms of reproducibility, repeatability, and stability, thereby meeting ISO 15197:2015 standards. Our study guides future research on next-generation sensors that combine copper with other materials to enhance activity in neutral media.

Techno-economic evaluation of UV light technologies in water remediation.

Disinfection commonly follows conventional treatments in wastewater treatment and remediation plants aiming at reducing the presence of pathogens. However, the presence of the so called "micropollutants" has emerged as a serious concern, therefore developing tertiary treatments that are not only able to remove pathogens but also to degrade micropollutants is worth investigating. Nowadays, UV-C photo-degradation processes are widely used for disinfection due to their simplicity and easy operation; additionally, they have shown potential for the removal of contaminants of emerging concern. Conventional mercury lamps are being replaced by light-emitting diodes (LEDs) that avoid the use of toxic mercury and can be switched on and off with no effect on the lamp lifetime. This work aims to comparatively evaluate the performance of several photo-degradation technologies for the removal of two targeted micropollutants, the pharmaceutical dexamethasone (DXMT) and the herbicide S-metolachlor (MTLC), using UV irradiation doses typical of disinfection processes. To this end, the technical performance of UV-A/UV-C photolysis, UV-A/UV-C photocatalysis, UV-C/H2O2 and UV-C/NaOCl has been compared. The influence of operating conditions such as the initial concentration of the pollutants (3 mg L-1 - 30 mg L-1, concentrations found in membrane or adsorption remediation steps), pH (3-10), and water matrix (WWTP secondary effluent, and ultrapure water) on the degradation efficiency has been studied. The economic evaluation in terms of electricity and chemicals consumption and the carbon footprint has been evaluated. UV-C photolysis and UV-C photocatalysis appear as the most suitable technologies for the degradation of DXMT and MTLC, respectively, in terms of kinetics (1.53·10-1 min-1 for DXMT and 1.96·10-2 min-1 for MTLC), economic evaluation (1 € m-3 for DXMT and 32 € m-3 for MTLC) and environmental indicators (0.5 g-CO2 for DXMT and 223.1 g-CO2 for MTLC).

The Relevance of Life Cycle Assessment Tools in the Development of Emerging Decarbonization Technologies.

The development of emerging decarbonization technologies requires advanced tools for decision-making that incorporate the environmental perspective from the early design. Today, Life Cycle Assessment (LCA) is the preferred tool to promote sustainability in the technology development, identifying environmental challenges and opportunities and defining the final implementation pathways. So far, most environmental studies related to decarbonization emerging solutions are still limited to midpoint metrics, mainly the carbon footprint, with global sustainability implications being relatively unexplored. In this sense, the Planetary Boundaries (PBs) have been recently proposed to identify the distance to the ideal reference state. Hence, PB-LCA methodology can be currently applied to transform the resource use and emissions to changes in the values of PB control variables. This study shows a complete picture of the LCA's role in developing emerging technologies. For this purpose, a case study based on the electrochemical conversion of CO2 to formic acid is used to show the possibilities of LCA approaches highlighting the potential pitfalls when going beyond greenhouse gas emission reduction and obtaining the absolute sustainability level in terms of four PBs.

Circular economy in hot-dip galvanizing with zinc and iron recovery from spent pickling acids.

The management of spent pickling acids (SPA) is an environmental challenge for the hot-dip galvanizing (HDG) industry. Bearing in mind its elevated content of iron and zinc, SPA can be regarded as a source of secondary materials in a circular economy approach. This work reports the pilot scale demonstration of non-dispersive solvent extraction (NDSX) in hollow fiber membrane contactors (HFMCs) to perform the selective zinc separation and SPA purification, so that the characteristics needed for use as a source of iron chloride are achieved. The operation of the NDSX pilot plant, which incorporates four HFMCs with a 80 m2 nominal membrane area, is carried out with SPA supplied by an industrial galvanizer, and consequently technology readiness level (TRL) 7 is reached. The purification of the SPA requires of a novel feed and purge strategy to operate the pilot plant in continuous mode. To facilitate the further implementation of the process, the extraction system is formed by tributyl phosphate as the organic extractant and tap water as the stripping agent, both easily available and cost-effective chemicals. The resulting iron chloride solution is successfully valorized as a hydrogen sulfide suppressor to purify the biogas generated in the anaerobic sludge treatment of a wastewater treatment plant. Additionally, we validate the NDSX mathematical model using pilot scale experimental data, providing a design tool for process scale-up and industrial implementation.