Ultrathin, Mechanically Durable, and Scalable Polymer-in-Salt Solid Electrolyte for High-Rate Lithium Metal Batteries.

Polymer-in-salt solid-state electrolytes (PIS SSEs) are emerging for high room-temperature ionic conductivity and facile handling, but suffer from poor mechanical durability and large thickness. Here, Al2O3-coated PE (PE/AO) separators are proposed as robust and large-scale substrates to trim the thickness of PIS SSEs without compromising mechanical durability. Various characterizations unravel that introducing Al2O3 coating on PE separators efficiently improves the wettability, thermal stability, and Li-dendrite resistance of PIS SSEs. The resulting PE/AO@PIS demonstrates ultra-small thickness (25 µm), exceptional mechanical durability (55.1 MPa), high decomposition temperature (330 °C), and favorable ionic conductivity (0.12 mS cm-1 at 25 °C). Consequently, the symmetrical Li cells remain stable at 0.1 mA cm-2 for 3000 h, without Li dendrite formation. Besides, the LiFePO4|Li full cells showcase excellent rate capability (131.0 mAh g-1 at 10C) and cyclability (93.6% capacity retention at 2C after 400 cycles), and high-mass-loading performance (7.5 mg cm-2). Moreover, the PE/AO@PIS can also pair with nickel-rich layered oxides (NCM811 and NCM9055), showing a remarkable specific capacity of 165.3 and 175.4 mAh g-1 at 0.2C after 100 cycles, respectively. This work presents an effective large-scale preparation approach for mechanically durable and ultrathin PIS SSEs, driving their practical applications for next-generation solid-state Li-metal batteries.

Continuous Synthesis of a Macrocyclic Sulfite of Polyethylene Glycol by Cascaded Continuous Stirred Tank Reactors (CSTRs).

Many macrocyclic compounds are attractive drug-like molecules or intermediates due to their special properties. However, the bulk synthesis of such compounds are hindered by the necessity of using diluted solutions, in order to prevent intermolecular reactions that yields oligomer impurities, thereby resulting in a low production efficiency. Such challenge can be adequately addressed by using continuous reactors, allowing improved efficiency with smaller space footprints. In this work, we proposed a novel continuous process for the synthesis of a macrocyclic sulfite of tetraethylene glycol (PEG4-MCSi), which is a precursor to a very useful building block, PEG4-macrocyclic sulfate (PEG4-MCS). The basic reaction parameters, including stoichiometry and temperature, were first confirmed with small batch reactions, and the effectiveness of coiled reactors and continuous stirred tank reactors (CSTRs) were compared. Cascaded CSTRs were proven to be suitable, and the reaction parameters were subject to further optimization to give a robust continuous process. The process was then tested with 4 parallel runs for up to 64 h. Finally, the merits and demerits of batch and continuous reactions were also compared, demonstrating the suitability of latter in the bulk production of macrocyclic PEG-MCSi compounds.

Continuous Synthesis of a Macrocyclic Sulfite of Polyethylene Glycol by Cascaded Continuous Stirred Tank Reactors (CSTRs).

Invited for the cover of this issue is the group of Long Pan and co-workers at Asymchem Life Sciences (Tianjin) Co. Ltd. The image depicts a novel continuous process for the synthesis of a macrocyclic poly(ethylene glycol) (PEG) sulfite, the precursor to PEG macrocyclic sulfate, a useful building block in PEG chemistry. Read the full text of the article at 10.1002/chem.202304319.

Operando Spectroscopic Monitoring of Metal Chalcogenides for Overall Water Splitting: New Views of Active Species and Sites.

Metal-based chalcogenides exhibit great promise for overall water splitting, yet their intrinsic catalytic reaction mechanisms remain to be fully understood. In this work, we employed operando X-ray absorption (XAS) and in situ Raman spectroscopy to elucidate the structure-activity relationships of low-crystalline cobalt sulfide (L-CoS) catalysts toward overall water splitting. The operando results for L-CoS catalyzing the alkaline hydrogen evolution reaction (HER) demonstrate that the cobalt centers in the bulk are predominantly coordinated by sulfur atoms, which undergo a kinetic structural rearrangement to generate metallic cobalt in S-Co-Co-S moieties as the true catalytically active species. In comparison, during the acidic HER, L-CoS undergoes local structural optimization of Co centers, and H2 production proceeds with adsorption/desorption of key intermediates atop the Co-S-Co configurations. Further operando characterizations highlight the crucial formation of high-valent Co4+ species in L-CoS for the alkaline oxygen evolution reaction (OER), and the formation of such active species was found to be far more facile than in crystalline Co3O4 and Co-LDH references. These insights offer a clear picture of the complexity of active species and site formation in different media, and demonstrate how their restructuring influences the catalytic activity.

Unveiling Enhanced Electrostatic Repulsion in Silica Nanosphere Assembly: Formation Dynamics of Body-Centered-Cubic Colloidal Crystals.

We demonstrate the effective establishment of long-range electrostatic interactions among colloidal silica nanospheres through acid treatment, enabling their assembly into colloidal crystals at remarkably low concentrations. This novel method overcomes the conventional limitation in colloidal silica assembly by removing entrapped NH4+ ions and enhancing the electrical double layer (EDL) thickness, offering a time-efficient alternative to increase electrostatic interactions compared with methods like dialysis. The increased EDL thickness facilitates the assembly of SiO2 nanospheres into a body-centered-cubic lattice structure at low particle concentrations, allowing for broad spectrum tunability and high tolerance to particle size polydispersity. Further, we uncover a disorder-order transition during colloidal crystallization at low particle concentrations, with the optimal concentration for crystal formation governed by both thermodynamic and kinetic factors. This work not only provides insights into assembly mechanisms but also paves the way for the design and functionalization of colloidal silica-based photonic crystals in diverse applications.

Single photon single pixel imaging into thick scattering medium.

Imaging into thick scattering medium is a long-standing challenge. Beyond the quasi-ballistic regime, multiple scattering scrambles the spatiotemporal information of incident/emitted light, making canonical imaging based on light focusing nearly impossible. Diffusion optical tomography (DOT) is one of the most popular approach to look inside scattering medium, but quantitatively inverting the diffusion equation is ill-posed, and prior information of the medium is typically necessary, which is nontrivial to obtain. Here, we show theoretically and experimentally that, by synergizing the one-way light scattering characteristic of single pixel imaging with ultrasensitive single photon detection and a metric-guided image reconstruction, single photon single pixel imaging can serve as a simple and powerful alternative to DOT for imaging into thick scattering medium without prior knowledge or inverting the diffusion equation. We demonstrated an image resolution of 12 mm inside a 60 mm thick (∼ 78 mean free paths) scattering medium.

Understanding the Streptomyces albulus response to low-pH stress at the interface of physiology and transcriptomics.

Streptomyces albulus is a well-established cell factory for ε-poly-L-lysine (ε-PL) production. It has been reported that ε-PL biosynthesis is strictly regulated by pH and that ε-PL can accumulate at approximately pH 4.0, which is outside of the general pH range for natural product production by Streptomyces species. However, how S. albulus responds to low pH is not clear. In this study, we attempted to explore the response of S. albulus to low-pH stress at the physiological and global gene transcription levels. At the physiological level, S. albulus maintained intracellular pH homeostasis at ~pH 7.5, increased the unsaturated fatty acid ratio, extended the fatty acid chain length, enhanced ATP accumulation, increased H+-ATPase activity, and accumulated the basic amino acids L-lysine and L-arginine. At the global gene transcription level, carbohydrate metabolism, oxidative phosphorylation, macromolecule protection and repair, and the acid tolerance system were found to be involved in combating low-pH stress. Finally, we preliminarily evaluated the effect of the acid tolerance system and cell membrane fatty acid synthesis on low-pH tolerance via gene manipulation. This work provides new insight into the adaptation mechanism of Streptomyces to low-pH stress and a new opportunity for constructing robust S. albulus strains for ε-PL production. KEY POINTS: • S. albulus consistently remained pH i at ~7.4 regardless of the environmental pH. • S. albulus combats low-pH stress by modulating lipid composition of cell membrane. • Overexpression of cfa in S. albulus could improve low-pH tolerance and ɛ-PL titer.

Correlative Atomic Force Microscopy and Raman Spectroscopy in Acid Erosion of Dentin.

Physical properties and chemical composition are fundamentally defining and interconnected surface characteristics. However, few techniques are able to capture both in a correlative fashion at the same sample location and orientation. This is especially important for complex materials such as dentin, which is an inner tooth structure and is a heterogeneous, composite inorganic-organic material with open channels (tubules) that extend toward the tooth pulp. Here, a combined microscope system consisting of an atomic force microscope and a confocal Raman spectrometer was used to study the correlative physical and chemical properties of human dentin. The local hardness of dentin was highly correlated with the Raman signal ratio of inorganic to organic material, and this was enhanced in the peritubular regions of dentin. When the samples were etched with citric acid, Young's modulus, hardness, and inorganic-to-organic material ratio decreased significantly, collagen fibrils on the surface were exposed, the peritubular regions were removed, and the tubule diameters increased. Thus, the combined atomic force microscopy (AFM)-Raman approach allows for comprehensive and correlative physical-chemical analysis of material surfaces and will be invaluable for evaluating oral therapeutic strategies.

Silica microparticles modified with ionic liquid bonded chitosan as hydrophilic moieties for preparation of high-performance liquid chromatographic stationary phases.

Two novel stationary phases, 1-(4-bromobutyl)-3-methylimidazolium bromide bonded chitosan modified silica and 1-(4-bromobutyl)-3-methylimidazolium bromide bonded chitosan derivatized calix[4]arene modified silica stationary phase, were synthesized using 1-(4-bromobutyl)-3-methylimidazolium bromide bonding chitosan as a polarity regulator solving the limitation of the strong hydrophobicity of calixarene in the application of hydrophilic field. The resulting materials were characterized by solid-state nuclear magnetic resonance, Fourier-transform infrared spectra, scanning electron microscopy, elemental analysis, and thermogravimetric analysis. Based on the hydrophilicity endowed by 1-(4-bromobutyl)-3-methylimidazolium bromide bonded chitosan, the retention mode of ILC-Sil and ILCC4-Sil could be effectively switched from the hydrophilic mode to a hydrophilic/hydrophobic mixed mode and could simultaneously provide various interactions with solutes, including hydrophilic, π-π, ion-exchange, inclusion, hydrophobic, and electrostatic interactions. On the basis of these interactions, successful separation and higher shape selectivity were achieved among compounds that vary in polarity under both reverse-phase and hydrophilic interactive liquid chromatography conditions. Moreover, the ILCC4-Sil was successfully applied to the determination of morphine in actual samples using solid-phase extraction and mass spectrometry. The LOD and LOQ were 15 pg/mL and 54 pg/mL, respectively. This work presents an exceptionally flexible adjustment strategy for the retention and selectivity of a silica stationary phase by tuning the modification group.

[Eleven new sesquiterpenoids from peeled stems of Syringa pinnatifolia].

The peeled stems of Syringa pinnatifolia(SP) is a representative Mongolian folk medicine with the effects of anti-depression, heat clearance, pain relief, and respiration improvement. It has been clinically used for the treatment of coronary heart disease, insomnia, asthma, and other cardiopulmonary diseases. As part of the systematic study on pharmacological substances of SP, 11 new sesquiterpenoids were isolated from the terpene-containing fractions of the ethanol extract of SP by liquid chromatography-mass spectrometry(LC-MS) and proton nuclear magnetic resonance(~1H-NMR) guided isolation methods. The planar structures of the sesquiterpenoids were identified by MS, 1D NMR, and 2D NMR data analysis, and were named pinnatanoids C and D(1 and 2), and alashanoids T-ZI(3-11), respectively. The structure types of the sesquiterpenoids included pinnatane, humulane, seco-humulane, guaiane, carryophyllane, seco-erimolphane, isodaucane, and other types. However, limited to the low content of compounds, the existence of multiple chiral centers, the flexibility of the structure, or lack of ultraviolet absorption, the stereoscopic configuration remained unresolved. The discovery of various sesquiterpenoids enriches the understanding of the chemical composition of the genus and species and provides references for further analysis of pharmacological substances of SP.

Cuticular protein genes involve heat acclimation of insect larvae under global warming.

Cuticular proteins (CPs) play important roles in insect growth and development. However, it is unknown whether CPs are related to heat tolerance. Cnaphalocrocis medinalis, a serious pest of rice, occurs in summer and exhibits strong adaptability to high temperature, but the underlying mechanism is unclear. Here, the role of CP genes in heat acclimation was studied. Heat tolerance of the heat-acclimated larvae was significantly stronger than the unacclimated larvae. The cuticular protein content in the heat-acclimated larvae was higher than that of the unacclimated larvae. 191 presumed CP genes of C. medinalis (CmCPs) were identified. Expression patterns of 14 CmCPs were different between the heat acclimated (S39) and unacclimated (S27) larvae under heat stress. CmCPs were specifically expressed in epidermis and the head except CmCPR20 mainly expressed in Malpighian tubules. CmCPR20 was upregulated in S39 while downregulated in S27, but CmTweedle1 and CmCPG1 were upregulated in S27 and downregulated in S39. RNAi CmTweedle1 or CmCPG1 remarkably decreased heat tolerance and cuticular protein content of the heat-acclimated larvae but not the unacclimated larvae. RNAi CmCPR20 decreased heat tolerance and cuticular protein content of the unacclimated larvae but not the heat-acclimated larvae. CmTweedle1 and CmCPG1 genes involve heat acclimation of C. medinalis.

Applications of scanning electron microscopy and focused ion beam milling in dental research.

The abilities of scanning electron microscopy (SEM) and focused ion beam (FIB) milling for obtaining high-resolution images from top surfaces, cross-sectional surfaces, and even in three dimensions, are becoming increasingly important for imaging and analyzing tooth structures such as enamel and dentin. FIB was originally developed for material research in the semiconductor industry. However, use of SEM/FIB has been growing recently in dental research due to the versatility of dual platform instruments that can be used as a milling device to obtain low-artifact cross-sections of samples combined with high-resolution images. The advent of the SEM/FIB system and accessories may offer access to previously inaccessible length scales for characterizing tooth structures for dental research, opening exciting opportunities to address many central questions in dental research. New discoveries and fundamental breakthroughs in understanding are likely to follow. This review covers the applications, key findings, and future direction of SEM/FIB in dental research in morphology imaging, specimen preparation for transmission electron microscopy (TEM) analysis, and three-dimensional volume imaging using SEM/FIB tomography.

Risk factors and consequences of conversion in minimally invasive distal pancreatectomy.

Background: Although recent studies have reported potential benefits of laparoscopic approach in distal pancreatectomy, reports of conversion during minimally invasive distal pancreatectomy (MIDP) were limited. Methods: This was a retrospective study using data from Sir Run Run Shaw Hospital around May 2013 to December 2018. Outcomes of patients who had conversions during MIDP were compared with patients with successful MIDP and with patients undergoing open distal pancreatectomy (ODP). Results: Two-hundred and eighty-three cases were included in this study: 225 (79.5%) had MIDP, 30 (10.6%) had conversions and 28 (9.9%) had outpatient department. The risk factors for conversion included large lesion size (heart rates [HR]: 5.632, 95% confidencevinterval [CI]: 1.036-1.450, P = 0.018) and pancreatic cancer (HR: 6.957, 95% CI: 1.359-8.022, P = 0.009). Compared with MIDP, those who required conversion were associated with longer operations (P = 0.003), higher blood loss (P < 0.001) and more severe of the complications (P < 0.001). However, no statistically significant differences were found between the conversion group and ODP. Conclusions: Large lesion size and pancreatic cancer were reported to be independent risk factors for conversion during MIDP. As for post-operative outcomes, the outcomes of successfully MIDP were better than those for conversion. However, conversion did not lead to worsening outcomes when compared with ODP.

Pristimerin protects against inflammation and metabolic disorder in mice through inhibition of NLRP3 inflammasome activation.

Excessive activation of NLRP3 inflammasome is associated with the pathogenesis of inflammatory diseases. Pristimerin (Pri) is a quinonoid triterpene derived from traditional Chinese medical herb Celastraceae and Hippocrateaceae. Pri has shown antifungal, antibacterial, antioxidant, and anticancer activities. In this study we investigated whether NLRP3 inflammasome was associated with the anti-inflammatory activity of Pri. We showed that Pri (0.1-0.4 µM) dose-dependently blocked caspase-1 activation and IL-1ß maturation in LPS-primed mouse bone-marrow-derived macrophages (BMDMs). Pri specifically inhibited NLRP3 inflammasome activation, had no visible effects on NLRC4 and AIM2 inflammasome activation. Furthermore, we demonstrated that Pri blocked the assembly of the NLRP3 inflammasome via disturbing the interaction between NEK7 and NLRP3; the α, ß-unsaturated carbonyl moiety of Pri was essential for NLRP3 inflammasome inactivation. In LPS-induced systemic inflammation mouse model and MSU-induced mouse peritonitis model, preinjection of Pri (500 µg/kg, ip) produced remarkable therapeutic effects via inhibition of NLRP3 inflammasome in vivo. In HFD-induced diabetic mouse model, administration of Pri (100 µg· kg-1 ·d-1, ip, for 6 weeks) reversed HFD-induced metabolic disorders via suppression of NLRP3 inflammasome activation. Taken together, our results demonstrate that Pri acts as a NLRP3 inhibitor, suggesting that Pri might be useful for the treatment of NLRP3-associated diseases.

10,11-dehydrocurvularin exerts antitumor effect against human breast cancer by suppressing STAT3 activation.

Aberrant activation of signal transducer and activator of transcription 3 (STAT3) plays a critical role in many types of cancers. As a result, STAT3 has been identified as a potential target for cancer therapy. In this study we identified 10,11-dehydrocurvularin (DCV), a natural-product macrolide derived from marine fungus, as a selective STAT3 inhibitor. We showed that DCV (2-8 µM) dose-dependently inhibited the proliferation, migration and invasion of human breast cancer cell lines MDA-MB-231 and MDA-MB-468, and induced cell apoptosis. In the two breast cancer cell lines, DCV selectively inhibited the phosphorylation of STAT3 Tyr-705, but did not affect the upstream components JAK1 and JAK2, as well as dephosphorylation of STAT3. Furthermore, DCV treatment strongly inhibited IFN-γ-induced STAT3 phosphorylation but had no significant effect on IFN-γ-induced STAT1 and STAT5 phosphorylation in the two breast cancer cell lines. We demonstrated that the α, ß-unsaturated carbonyl moiety of DCV was essential for STAT3 inactivation. Cellular thermal shift assay (CETSA) further revealed the direct engagement of DCV with STAT3. In nude mice bearing breast cancer cell line MDA-MB-231 xenografts, treatment with DCV (30 mg·kg-1·d-1, ip, for 14 days) markedly suppressed the tumor growth via inhibition of STAT3 activation without observed toxicity. Our results demonstrate that DCV acts as a selective STAT3 inhibitor for breast cancer intervention.

Evaluation of multiple hydrophilic interaction chromatography columns and surrogate matrix for arginine quantification in saliva by high-resolution mass spectrometry.

Arginine, a pivotal ingredient in many biochemical synthetic pathways, can be used as a biomarker for many oral care clinical applications. It is still a challenge to develop a sensitive and reliable chromatographic method to quantify arginine as a biomarker in saliva, with or without arginine product pretreatment. The current method solved two critical issues for arginine quantitation in human saliva. The first issue was how to optimize arginine peak shape. A hydrophilic interaction chromatography method based on the column selection, pH and pKa relationship, mobile phase ionic strength, organic solvent consideration, and temperature effects was developed. An optimized chromatographic condition for arginine quantitation in the saliva matrix was obtained. The second issue was how to build confidence in the use of a simple surrogate matrix methodology to replace the more complex traditional standard addition methodology. The surrogate matrix methodology we developed is applicable to the measurement of arginine as a potential non-invasive biomarker in human saliva. The method detection and quantification limit reached 2 and 6 ng/mL. The tailing factor was within the 0.9-1.1 range even though arginine had three pKa values at 2.18, 9.09, and 13.2.

Low-tannin sorghum grain could be used as an alternative to corn in diet for nursery pigs.

This study was conducted to test the hypothesis that low-tannin sorghum grain produced in China as a potential substitute for corn in diets could not impair the performance of nursery pigs. A total of 60 pigs (7.2 ± 1.2 kg) were randomly assigned to 2 diets with 5 replicate pens per treatment. Corn-based diet (CBD) included 60% corn grain during the overall experimental period, and sorghum-based diet (SBD) consisted of 30% (d 1 to 14) or 60.55% (d 15 to 28) sorghum grain in partial or total replacement of corn grain. Both diets were formulated to contain the same amount of digestible energy and indispensable amino acids. The results demonstrated no differences in growth performance or apparent digestibility of gross energy between treatments over the whole period. However, the substitution of corn by sorghum reduced (p < 0.05) or tended to reduce (p = 0.09) apparent digestibility of crude protein associated with an increased faecal nitrogen excretion per weight gain (p < 0.05). Pigs fed SBD had higher contents of urea nitrogen, total triglyceride and insulin in serum than those fed CBD (p < 0.05). Visceral organ weights or antioxidant enzyme activities in serum or liver were not different between treatments. Compared with CBD, SBD increased or tended to increase amylase activity in jejunal mucosa (p < 0.05) or trypsin activity in duodenal mucosa (p = 0.08). Replacement of corn by the low-tannin sorghum in diets did not influence the microbiota community based on alpha and beta diversity in caecal and colonal digesta. Overall, the home-grown low-tannin sorghum could be an alternative energy source in diets for pigs without adverse effects on growth performance.

Immunity improvement and gut microbiota remodeling of mice by wheat germ globulin.

The wheat germ protein (WG) and it's proteolytic peptide have a variety of biological activities. Our previous work showed that WG could improve immunity of the immunosuppressive mice established by cyclophosphamide. However, in the healthy condition and normal diet, as a supplementary food, the effects of immunity improvement and gut microbiota remodeling by the wheat germ globulin has not been studied yet. Here, we reported that WG could improve the immunity and remodel the gut microbiota of the mice, as a potentially safe functional supplementary food for the first time. The increase of interleukin-6 (IL-6) and the decrease of tumor necrosis factor α (TNF-α) and interleukin-10 (IL-10) indicated that WG could enhance the levels of activated T cells and monocytes and anti-inflammatory ability, meanwhile, the significant increase of immunoglobin G (lgG) and the notable decrease of the immunoglobin M (lgM) and immunoglobin A (lgA) illustrated that WG could improve immunity by promoting the differentiation and maturation process of B cells, compared with the NC group (normal control group). 16S rRNA sequencing showed WG could remodel the gut microbiota. At the phylum level, the Bacteroidetes were reduced and Firmicutes were increased in WG group, compared with NC group. At the genus level, the SCFA producing genera of unclassified_f_Lachnospiraceae, Blautia and especially the Roseburia (increased more than threefold) increased notably. Further, the level changes of cytokines and immunoglobulins were associated with the gut microbiota. This work showed that WG could improve immunity and has potential application value as an immune-enhancing functional food.

[Network pharmacology study of Tibetan medicine Corydalis Herba against acute myocardial ischemia].

In this study, the compound search was completed through SciFinder and CNKI databases, and the drug-like properties were screened in FAFdrugs4 and SEA Search Server databases. In addition, based on the target sets related to acute myocardial ischemia(AMI) searched in disease target databases such as OMIM database, GeneCards database and DrugBank, a network diagram of chemical component-target-pathway-disease was established via Cytoscape to predict the potential active components of Corydalis Herba, a traditional Tibetan herbal medicine which derived from the aerial parts of Corydalis hendersonii and C. mucronifera against AMI. A protein-protein interaction(PPI) network was constructed through the STRING database and the core targets in the network were predicted. And the enrichment analyses of core targets were completed by DAVID database and R software. Furthermore, a molecular docking method was used to verify the binding of the components with core targets using softwares such as Autodock Vina. The present results showed that there were 60 compounds related to AMI in Corydalis Herba, involving 73 potential targets. The GO functional enrichment analysis obtained 282 biological processes(BP), 49 cell components(CC) and 78 molecular functions(MF). KEGG was enriched into 85 pathways, including alcoholism pathway, endocrine resistance pathway, calcium signaling pathway, cAMP signaling pathway, vascular endothelial growth factor signaling pathway and adrenergic signaling transduction pathway of myocardial cells. The results of network topology analysis showed that the key components of anti-AMI of Corydalis Herba might be tetrahydropalmatine, etrahydrocolumbamine, N-trans-feruloyloctopamine, N-cis-p-coumaroyloctopamine, N-trans-p-coumaroylnoradrenline and N-trans-p-coumaroyloctopamine, and their core targets might be CDH23, SCN4 B and NFASC. The results of molecular docking showed that the key components of Corydalis Herba had stable binding activity with the core targets. This study provides reference for further elucidation of the pharmacological effects of Corydalis Herba against AMI, subsequent clinical application, and development.

Coordination-Driven Hierarchical Assembly of Hybrid Nanostructures Based on 2D Materials.

2D materials have received tremendous scientific and engineering interests due to their remarkable properties and broad-ranging applications such as energy storage and conversion, catalysis, biomedicine, electronics, and so forth. To further enhance their performance and endow them with new functions, 2D materials are proposed to hybridize with other nanostructured building blocks, resulting in hybrid nanostructures with various morphologies and structures. The properties and functions of these hybrid nanostructures depend strongly on the interfacial interactions between 2D materials and other building blocks. Covalent and coordination bonds are two strong interactions that hold high potential in constructing these robust hybrid nanostructures based on 2D materials. However, most 2D materials are chemically inert, posing problems for the covalent assembly with other building blocks. There are usually coordination atoms in most of 2D materials and their derivatives, thus coordination interaction as a strong interfacial interaction has attracted much attention. In this review, recent progress on the coordination-driven hierarchical assembly based on 2D materials is summarized, focusing on the synthesis approaches, various architectures, and structure-property relationship. Furthermore, insights into the present challenges and future research directions are also presented.