RESUMEN
In this paper, a novel concept of a three-dimensional full metal system including a Dual-Mode Converter (DMC) network integrated with a high-gain Conical Horn Antenna (CHA) is presented. This system is designed for 5G millimeter wave applications requiring monopulse operation at K-band (37.5-39 GHz). The DMC integrates two mode converters. They excite either the TE11cir or the TE01cir modes of the circular waveguide of the CHA. The input of the mode converters is the TE10rec mode of two independent WR-28 standard rectangular waveguide ports. By integrating the DMC with the CHA, the whole system, called a Dual-Mode Conical Horn Antenna (DM-CHA), is formed, radiating the sum (Σ) and difference (Δ) patterns associated to the monopulse operation. To adequately prevent the propagation of higher order modes and mode mutual coupling, this integration procedure is carefully designed and fabricated. To prove the performance of the design, the DMC network was fabricated using subtractive manufacturing by Computer Numerical Control (CNC) technology. The CHA was fabricated using additive manufacturing by Direct Metal Laser Sintering (DLMS) technology. Finally, the simulation and measurement results were exhaustively compared, including return loss, isolation, radiation pattern, and gain of the full DM-CHA structure. It is noteworthy that this system provided up to ±11° per beam in the angular of arrival detection to support the high data rate operation for 5G satellite communications in the millimeter-wave band.
RESUMEN
Two types of cost-efficient antennas based on dielectric gradient index dielectric lens have been designed for 5G applications at 28 GHz. The first is a linearly polarized flat lens antenna (LP-FLA) for terrestrial 5G communications. The second is a novel circularly polarized stepped lens antenna (CP-SLA) for 5G satellite services. An efficient design method is presented to optimize and conform the lens topology to the radiation pattern coming from the antenna feeder. The LP-FLA is fed by a traditional linearly polarized pyramidal horn antenna (PHA). The CP-SLA is fed by an open-ended bow-tie waveguide cavity (BCA) antenna. This cavity feeder (BCA), using cross-sections with bow-tie shapes, allows having circular polarization at the desired frequency bandwidth. The two types of presented antennas have been manufactured in order to verify their performance by an easy, low-cost, three-dimensional (3D) printing technique based on stereolithography. The peak realized gain value for the flat (LP-FLA) and stepped (CP-SLA) lens antennas have been increased at 28 GHz to 25.2 and 24.8 dBi, respectively, by disposing the lens structures at the appropriated distance from the feeders. Likewise, using an array of horns (PHA) or open-ended bow-tie waveguide cavity (BCA) antenna feeders, it is possible to obtain a maximum steering angle range of 20° and 35°, for a directivity over 15 dBi and 10 dBi, in the planar and stepped lens antennas, respectively.