Coumarin-Based Photodegradable Hydrogels Enable Two-Photon Subtractive Biofabrication at 300†mm s-1.

Spatiotemporally controlled two-photon photodegradation of hydrogels has gained increasing attention for high-precision subtractive tissue engineering. However, conventional photolabile hydrogels often have poor efficiency upon two-photon excitation in the near-infrared (NIR) region and thus require high laser dosage that may compromise cell activity. As a result, high-speed two-photon hydrogel erosion in the presence of cells remains challenging. Here we introduce the design and synthesis of efficient coumarin-based photodegradable hydrogels to overcome these limitations. A set of photolabile coumarin-functionalized polyethylene glycol linkers are synthesized through a Passerini multicomponent reaction. After mixing these linkers with thiolated hyaluronic acid, semi-synthetic photodegradable hydrogels are formed in situ via Michael addition crosslinking. The efficiency of photodegradation in these hydrogels is significantly higher than that in nitrobenzyl counterparts upon two-photon irradiation at 780 nm. A complex microfluidic network mimicking the bone microarchitecture is successfully fabricated in preformed coumarin hydrogels at high speeds of up to 300 mm s-1 and low laser dosage down to 10 mW. Further, we demonstrate fast two-photon printing of hollow microchannels inside a hydrogel to spatiotemporally direct cell migration in 3D. Collectively, these hydrogels may open new avenues for fast laser-guided tissue fabrication at high spatial resolution.

Precise pancreatic cancer therapy through targeted degradation of mutant p53 protein by cerium oxide nanoparticles.

BACKGROUND: In a significant proportion of cancers, point mutations of TP53 gene occur within the DNA-binding domain, resulting in an abundance of mutant p53 proteins (mutp53) within cells, which possess tumor-promoting properties. A potential and straightforward strategy for addressing p53-mutated cancer involves the induction of autophagy or proteasomal degradation. Based on the previously reported findings, elevating oxidative state in the mutp53 cells represented a feasible approach for targeting mutp53. However, the nanoparticles previous reported lacked sufficient specificity of regulating ROS in tumor cells, consequently resulted in unfavorable toxicity in healthy cells. RESULTS: We here in showed that cerium oxide CeO2 nanoparticles (CeO2 NPs) exhibited an remarkable elevated level of ROS production in tumor cells, as compared to healthy cells, demonstrating that the unique property of CeO2 NPs in cancer cells provided a feasible solution to mutp53 degradation. CeO2 NPs elicited K48 ubiquitination-dependent degradation of wide-spectrum mutp53 proteins in a manner that was dependent on both the dissociation of mutp53 from the heat shock proteins Hsp90/70 and the increasing production of ROS. As expected, degradation of mutp53 by CeO2 NPs abrogated mutp53-manifested gain-of-function (GOF), leading to a reduction in cell proliferation and migration, and dramatically improved the therapeutic efficacy in a BxPC-3 mutp53 tumor model. CONCLUSIONS: Overall, CeO2 NPs increasing ROS specifically in the mutp53 cancer cells displayed a specific therapeutic efficacy in mutp53 cancer and offered an effective solution to address the challenges posed by mutp53 degradation, as demonstrated in our present study.

Kruppel Like Factor 5 Enhances High Glucose-Induced Renal Tubular Epithelial Cell Transdifferentiation in Diabetic Nephropathy.

Background - Diabetic nephropathy (DN) is a principal reason for kidney disease worldwide. High glucose (HG) is a major factor for DN. Kruppel like factor 5 (KLF5) participates in DN development. In the present study, we aim to elaborate the role of KLF5 in HG-induced renal tubular epithelial cell (RTEC) transdifferentiation in DN. Methods - RTECs (HK-2 cells) were treated with HG and were transfected with si-KLF5 or oe-HMGB1. Afterwards, expression of KLF5 and HMGB1 was detected, HK cell viability was determined, and levels of alpha-smooth muscle actin (α-SMA), E-cadherin, vimentin, and transforming growth factor beta 1 (TGF-ß1) were assessed. Additionally, the binding relation between KLF5 and HMGB1 was analyzed. Results - In HK-2 cells with HG treatment, expression of KLF5 and HMGB1 was upregulated; levels of α-SMA, vimentin, and TGF-ß1 were increased; and E-cadherin level was decreased. Moreover, KLF5 silencing resulted in down-regulated levels of α-SMA, vimentin, and TGF-ß1 but upregulated level of E-cadherin. On the other hand, KLF5 could bind to the HMGB1 promoter and activate HMGB1 transcription. HMGB1 overexpression partially counteracted the inhibitive effect of KLF5 silencing on HG-induced HK-2 transdifferentiation. Conclusion - HG induced overexpressed KLF5 in RTECs, and as a transcription factor, KLF5 could bind to the HMGB1 promoter, thereby promoting HMGB1 transcription and RTEC transdifferentiation.

Functionalized Bead Assay to Measure Three-dimensional Traction Forces during T-cell Activation.

When T-cells probe their environment for antigens, the bond between the T-cell receptor (TCR) and the peptide-loaded major histocompatibility complex (MHC) is put under tension, thereby influencing the antigen discrimination. Yet, the quantification of such forces in the context of T-cell signaling is technically challenging. Here, we developed a traction force microscopy platform which allows for quantifying the pulls and pushes exerted via T-cell microvilli, in both tangential and normal directions, during T-cell activation. We immobilized specific T-cell activating antibodies on the marker beads used to read out the hydrogel deformation. Microvilli targeted the functionalized beads, as confirmed by superresolution microscopy of the local actin organization. Moreover, we found that cellular components, such as actin, TCR, and CD45 reorganize upon interaction with the beads, such that actin forms a vortex-like ring structure around the beads and TCR is enriched at the bead surface, whereas CD45 is excluded from bead-microvilli contacts.

Nano-3D-Printed Photochromic Micro-Objects.

Molecular photoswitches that can reversibly change color upon irradiation are promising materials for applications in molecular actuation and photoresponsive materials. However, the fabrication of photochromic devices is limited to conventional approaches such as mold casting and spin-coating, which cannot fabricate complex structures. Reported here is the first photoresist for direct laser writing of photochromic 3D micro-objects via two-photon polymerization. The integration of photochromism into thiol-ene photo-clickable resins enables rapid two-photon laser processing of highly complex microstructures and facile postmodification using a series of donor-acceptor Stenhouse adduct (DASA) photoswitches with different excitation wavelengths. The versatility of thiol-ene photo-click reactions allows fine-tuning of the network structure and physical properties as well as the type and concentration of DASA. When exposed to visible light, these microstructures exhibit excellent photoresponsiveness and undergo reversible color-changing via photoisomerization. It is demonstrated that the fluorescence variations of DASAs can be used as a reporter of photoswitching and thermal recovery, allowing the reading of DASA-containing sub-micrometric structures in 3D. This work delivers a new approach for custom microfabrication of 3D photochromic objects with molecularly engineered color and responsiveness.

The Predominance of Strain Replacement Among Enterobacteriaceae Pairs With Emerging Carbapenem Resistance During Hospitalization.

Isolates of Enterobacteriaceae collected from the same patient can lose carbapenem susceptibility during antimicrobial therapy, but little attention has been given to how this conversion takes place. In the current study, we retrospectively analyzed microbiological and clinical data from patients with enterobacterial infections at a tertiary hospital in Shanghai, China. After screening 4795 patients and 7120 Enterobacteriaceae isolates over the 3-year study period, we found the change from carbapenem susceptible to carbapenem resistant in 41 pairs of isolates, of which 35 pairs (85.4%) were K. pneumoniae and 25 (61.0%) were from the same anatomic sites. Thirty-six isolate pairs showed different pulsed-field gel electrophoresis patterns between the carbapenem-susceptible and the corresponding resistant strain, and 5 pairs displayed identical pulsed-field gel electrophoresis patterns. Thirty-three (91.7%) of the 36 pairs of Enterobacteriaceae isolates were carbapenem-resistant K. pneumoniae with blaKPC-2, and 28 pairs (90.3%) of K. pneumoniae isolates had different sequence types (STs), with ST11 the most common ST found in carbapenem-resistant K. pneumoniae isolates. Forty of the 41 patients had received antimicrobial therapy such as carbapenems, cephalosporins, and fluoroquinolones, before the isolation of carbapenem-resistant Enterobacteriaceae. These results demonstrated that strain replacement is the main cause of emerging carbapenem resistance in Enterobacteriaceae during hospitalization. The loss of carbapenem susceptibility was not mainly due to in vivo development of carbapenem resistance.

The Colonization of Carbapenem-Resistant Klebsiella pneumoniae: Epidemiology, Resistance Mechanisms, and Risk Factors in Patients Admitted to Intensive Care Units in China.

BACKGROUND: Carbapenem-resistant Klebsiella pneumoniae (CRKP) has become a threat to public health, most notably as a superbug causing nosocomial infections. Patients in the intensive care unit (ICU) are at increased risk of hospital-acquired K pneumoniae infection, especially CRKP. This study was conducted to investigate the frequency of gastrointestinal and nasopharyngeal K pneumoniae colonization and its contribution to infections in ICU patients. METHODS: A 3-month prospective cohort study was performed in which 243 ICU patients were screened for intestinal and nasopharyngeal carriage of K pneumoniae at admission and once per week thereafter. The colonization and clinical infection isolates were analyzed by antimicrobial susceptibility testing to identify CRKP and were characterized by multilocus sequence typing (MLST) and whole-genome sequencing combined with epidemiological data to investigate the resistance mechanisms and assess the possible transmitted infection. RESULTS: Twenty-eight percent (68 of 243) of patients tested positive for carriage of K pneumoniae immediately upon admission to ICU, 54% (37 of 68) of which were nonduplicate CRKP isolates. Patients with carbapenem-susceptible K pneumoniae (CSKP) colonization at admission were more likely to acquire CRKP colonization during the ICU stay compared with patients without K pneumoniae colonization at admission. The incidence of subsequent CRKP infection in the baseline CSKP (32.3%, 10 of 31) and CRKP (45.9%, 17 of 37) carrier group was significantly higher than that of the baseline non-KP carrier group (8.6%, 15 of 175). The risk factors associated with acquired CRKP colonization during the ICU stay among negative CRKP colonization at admission included previous exposure to carbapenem, tigecycline or ß-lactam/ß-lactamases inhibitor, and invasive processes or surgical operations. Sixty-four percent (27 of 42) of patients with K pneumoniae infection were colonized by clonally related K pneumoniae strains according to enterobacterial repetitive intergenic consensus sequence-polymerase chain reaction analysis. ST11 (72%, 53 of 74) was the most predominant MLST type of clonally related CRKP isolate colonizing these patients, followed by ST15 (26%, 19 of 74). CONCLUSIONS: The colonization of K pneumoniae may increase the incidence of corresponding K pneumoniae infection in critically ill patients in the ICU. High prevalence of ST11 CRKP (due to blaKPC-2) carriage and infection in ICU was observed.

Long Non-Coding RNA (LncRNA) CASC15 Is Upregulated in Diabetes-Induced Chronic Renal Failure and Regulates Podocyte Apoptosis.

BACKGROUND CASC15 has been recently characterized as an oncogenic lncRNA. This study aimed to investigate the role of CASC15 in diabetic patients complicated with chronic renal failure (DCRF). MATERIAL AND METHODS Levels of CASC15 in plasma derived from 3 groups of participants were measured by qPCR and compared by ANOVA and Tukey test. The interaction between CASC15 and miR-34c was analyzed by performing cell transfections. Cell apoptosis assay was performed to analyze the effects of transfections on the apoptosis of CIHP-1 cells (podocytes). RESULTS We found that CASC15 in plasma was upregulated in DCRF compared with diabetic patients (no obvious complications) and healthy controls. Upregulation of CASC15 distinguished DCRF patients from healthy controls and diabetic patients. High D-glucose environment induced the upregulation of CASC15 in cells of the human podocyte cell line CIHP-1. Overexpression of CASC15 did not affect miR-34c in CIHP-1 cells, but bioinformatics analysis showed that CASC15 can sponge miR-34c. Overexpression of CASC15 led to an increased apoptotic rate of CIHP-1 cells, and miR-34c overexpression led to a decreased apoptotic rate of CIHP-1 cells. In addition, CASC15 overexpression attenuated the effects of miR-34c overexpression on cell apoptosis. CONCLUSIONS Therefore, CASC15 is upregulated in DCRF patients and promotes the apoptosis of podocytes by sponging miR-34c. Our study adds to our understanding of the pathogenesis of DCRF and suggests that CASC15 could serve as a potential therapeutic target of DCRF.

Cell-Membrane-Inspired Silicone Interfaces that Mitigate Proinflammatory Macrophage Activation and Bacterial Adhesion.

Biofouling on silicone implants causes serious complications such as fibrotic encapsulation, bacterial infection, and implant failure. Here we report the development of antifouling, antibacterial silicones through covalent grafting with a cell-membrane-inspired zwitterionic gel layer composed of 2-methacryolyl phosphorylcholine (MPC). To investigate how substrate properties influence cell adhesion, we cultured human-blood-derived macrophages and Escherichia coli on poly(dimethylsiloxane) (PDMS) and MPC gel surfaces with a range of 0.5-50 kPa in stiffness. Cells attach to glass, tissue culture polystyrene, and PDMS surfaces, but they fail to form stable adhesions on MPC gel surfaces due to their superhydrophilicity and resistance to biofouling. Cytokine secretion assays confirm that MPC gels have a much lower potential to trigger proinflammatory macrophage activation than PDMS. Finally, modification of the PDMS surface with a long-term stable hydrogel layer was achieved by the surface-initiated atom-transfer radical polymerization (SI-ATRP) of MPC and confirmed by the decrease in contact angle from 110 to 20° and the >70% decrease in the attachment of macrophages and bacteria. This study provides new insights into the design of antifouling and antibacterial interfaces to improve the long-term biocompatibility of medical implants.

Systemic mastocytosis with recurrent anaphylactic shock and multiple organ dysfunction failure.

BACKGROUND: Systemic mastocytosis (SM) is a rare neoplasm. The symptoms of this disease vary among patients. The authors describe a rare case of SM with recurrent anaphylactic shock and multiple organ dysfunction failure. METHODS: Hematologic investigation, bone marrow aspirate and biopsy, and cytogenetic analysis were performed. RESULTS: The patient was rescued with positive treatment, administered on prednisolone and H1/H2-receptor blocking agents. Corticosteroid and IFN-α treatment have no significant effect on tumor burden, but no more anaphylactic shock occurred. CONCLUSIONS: Cladribine and imatinib are recommended to treat SM patients to obtain a better therapeutic effect. Maybe allogeneic hematopoietic stem cell transplantation is a cure for SM.

Laser photofabrication of cell-containing hydrogel constructs.

The two-photon polymerization (2PP) of photosensitive gelatin in the presence of living cells is reported. The 2PP technique is based on the localized cross-linking of photopolymers induced by femtosecond laser pulses. The availability of water-soluble photoinitiators (PI) suitable for 2PP is crucial for applying this method to cell-containing materials. Novel PIs developed by our group allow 2PP of formulations with up to 80% cell culture medium. The cytocompatibility of these PIs was evaluated by an MTT assay. The results of cell encapsulation by 2PP show the occurrence of cell damage within the laser-exposed regions. However, some cells located in the immediate vicinity and even within the 2PP-produced structures remain viable and can further proliferate. The control experiments demonstrate that the laser radiation itself does not damage the cells at the parameters used for 2PP. On the basis of these findings and the reports by other groups, we conclude that such localized cell damage is of a chemical origin and can be attributed to reactive species generated during 2PP. The viable cells trapped within the 2PP structures but not exposed to laser radiation continued to proliferate. The live/dead staining after 3 weeks revealed viable cells occupying most of the space available within the 3D hydrogel constructs. While some of the questions raised by this study remain open, the presented results indicate the general practicability of 2PP for 3D processing of cell-containing materials. The potential applications of this highly versatile approach span from precise engineering of 3D tissue models to the fabrication of cellular microarrays.

Interpenetrating network hydrogels for studying the role of matrix viscoelasticity in 3D osteocyte morphogenesis.

During bone formation, osteoblasts are embedded in a collagen-rich osteoid tissue and differentiate into an extensive 3D osteocyte network throughout the mineralizing matrix. However, how these cells dynamically remodel the matrix and undergo 3D morphogenesis remains poorly understood. Although previous reports investigated the impact of matrix stiffness in osteocyte morphogenesis, the role of matrix viscoelasticity is often overlooked. Here, we report a viscoelastic alginate-collagen interpenetrating network (IPN) hydrogel for 3D culture of murine osteocyte-like IDG-SW3 cells. The IPN hydrogels consist of an ionically crosslinked alginate network to tune stress relaxation as well as a permissive collagen network to promote cell adhesion and matrix remodeling. Two IPN hydrogels were developed with comparable stiffnesses (4.4-4.7 kPa) but varying stress relaxation times (t1/2, 1.5 s and 14.4 s). IDG-SW3 cells were pre-differentiated in 2D under osteogenic conditions for 14 days to drive osteoblast-to-osteocyte transition. Cellular mechanosensitivity to fluid shear stress (2 Pa) was confirmed by live-cell calcium imaging. After embedding in the IPN hydrogels, cells remained highly viable following 7 days of 3D culture. After 24 h, osteocytes in the fast-relaxing hydrogels showed the largest cell area and long dendritic processes. However, a significantly larger increase of some osteogenic markers (ALP, Dmp1, hydroxyapatite) as well as intercellular connections via gap junctions were observed in slow-relaxing hydrogels on day 14. Our results imply that fast-relaxing IPN hydrogels promote early cell spreading, whereas slow relaxation favors osteogenic differentiation. These findings may advance the development of 3D in vivo-like osteocyte models to better understand bone mechanobiology.

Clinical features and risk factors for pyogenic liver abscess caused by multidrug-resistant organisms: A retrospective study.

The incidence rate of pyogenic liver abscess caused by multidrug-resistant bacteria has increased in recent years. This study aimed to identify the clinical characteristics and risk factors for pyogenic liver abscess caused by multidrug-resistant bacteria. We conducted a retrospective analysis of the clinical features, laboratory test results, and causes of pyogenic liver abscesses in 239 patients admitted to a tertiary hospital. Multivariable logistic regression was used to identify risk factors for multidrug resistance. Among patients with pyogenic liver abscesses, the rate of infection caused by multidrug-resistant organisms was observed to be 23.0% (55/239), with a polymicrobial infection rate of 14.6% (35/239). Additionally, 71 cases (29.7%) were associated with biliary tract disease. Patients with pyogenic liver abscesses caused by multidrug-resistant organisms had a significantly higher likelihood of polymicrobial infection and increased mortality (7/44 [15.9%] vs. 3/131 [2.3%]; p = .003). The Charlson Comorbidity Index (adjusted odds ratio [aOR]: 1.32, 95% confidence interval [CI]: 1.06-1.68), hospitalization (aOR: 10.34, 95% CI: 1.86-60.3) or an invasive procedure (aOR: 9.62; 95% CI: 1.66-71.7) within the past 6 months, and gas in the liver on imaging (aOR: 26.0; 95% CI: 3.29-261.3) were independent risk factors for pyogenic liver abscess caused by multidrug-resistant bacteria. A nomogram was constructed based on the risk factors identified. The nomogram showed high diagnostic accuracy (specificity, 0.878; sensitivity 0.940). Multidrug-resistant organisms causing pyogenic liver abscesses have specific characteristics. Early identification of patients at high risk of infection with multidrug-resistant organisms could help improve their management and enable personalized treatment.

Antimicrobial resistance of clinical bacterial isolates in China: current status and trends.

Antimicrobial resistance surveillance systems have been established in China. Two representative national surveillance networks are the China Antimicrobial Surveillance Network (CHINET) and China Antimicrobial Resistance Surveillance System (CARSS), both of which were established in 2005. For all clinical isolates collected in both of these surveillance networks, the ratio of Gram-negative bacilli to Gram-positive cocci was approximately 7:3 during the past 18 years. Generally, Gram-negative bacilli have a higher antimicrobial resistance profile in China. The prevalence of ESBLs in Escherichia coli is as high as approximately 50%. Acinetobacter baumannii-calcoaceticus complex (ABC) has a high antimicrobial resistance profile, with a carbapenem resistance rate of approximately 66%. However, the prevalence of carbapenem-resistant ABC has also shown a decreasing trend from 2018 to 2022. The prevalence of vancomycin-resistant Enterococcus was low, and the prevalence of MRSA and carbapenem-resistant Pseudomonas aeruginosa showed decreasing trends from 2005 to 2022. CHINET surveillance data demonstrated that the prevalence of carbapenem-resistant Klebsiella pneumoniae showed a remarkable increasing trend from 2.9% (imipenem resistance) in 2005 to 25.0% in 2018, and then slightly decreased to 22.6% in 2022. The decreasing trends may reflect the antimicrobial stewardship efforts in China: a professional consensus on the rational clinical use of carbapenems was issued by the National Health Commission of China and was well implemented nationally; after that, the clinical use of carbapenems decreased slightly in China.

Photodynamic Modulation of Endoplasmic Reticulum and Mitochondria Network Boosted Cancer Immunotherapy.

Immunogenic cell death (ICD) represents a promising approach for enhancing tumor therapy efficacy by inducing antitumor immune response. However, current ICD inducers often have insufficient endoplasmic reticulum (ER) enrichment and ineffectiveness in tumor immune escape caused by ER-mitochondria interaction. In this study, a kind of photoactivatable probe, THTTPy-PTSA, which enables sequential targeting of the ER and mitochondria is developed. THTTPy-PTSA incorporates p-Toluenesulfonamide (PTSA) for ER targeting, and upon light irradiation, the tetrahydropyridine group undergoes a photo oxidative dehydrogenation reaction, transforming into a pyridinium group that acts as a mitochondria-targeting moiety. The results demonstrate that THTTPy-PTSA exhibits exceptional subcellular translocation from the ER to mitochondria upon light irradiation treatment, subsequently triggers a stronger ER stress response through a cascade-amplification effect. Importantly, the augmented ER stress leads to substantial therapeutic efficacy in a 4T1 tumor model by eliciting the release of numerous damage-associated molecular patterns, thereby inducing evident and widespread ICD, consequently enhancing the antitumor immune efficacy. Collectively, the findings emphasize the pivotal role of photodynamic modulation of the ER-mitochondria network, facilitated by THTTPy-PTSA with precise spatial and temporal regulation, in effectively bolstering the antitumor immune response. This innovative approach presents a promising alternative for addressing the challenges associated with cancer immunotherapy.

Guiding bone cell network formation in 3D via photosensitized two-photon ablation.

A long-standing challenge in skeletal tissue engineering is to reconstruct a three-dimensionally (3D) interconnected bone cell network in vitro that mimics the native bone microarchitecture. While conventional hydrogels are extensively used in studying bone cell behavior in vitro, current techniques lack the precision to manipulate the complex pericellular environment found in bone. The goal of this study is to guide single bone cells to form a 3D network in vitro via photosensitized two-photon ablation of microchannels in gelatin methacryloyl (GelMA) hydrogels. A water-soluble two-photon photosensitizer (P2CK) was added to soft GelMA hydrogels to enhance the ablation efficiency. Remarkably, adding 0.5 mM P2CK reduced the energy dosage threshold five-fold compared to untreated controls, enabling more cell-compatible ablation. By employing low-energy ablation (100 J/cm2) with a grid pattern of 1 µm wide and 30 µm deep microchannels, we induced dendritic outgrowth in human mesenchymal stem cells (hMSC). After 7 days, the cells successfully utilized the microchannels and formed a 3D network. Our findings reveal that cellular viability after low-energy ablation was comparable to unablated controls, whereas high-energy ablation (500 J/cm2) resulted in 42 % cell death. Low-energy grid ablation significantly promoted network formation and >40 µm long protrusion outgrowth. While the broad-spectrum matrix metalloproteinase inhibitor (GM6001) reduced cell spreading by inhibiting matrix degradation, cells invaded the microchannel grid with long protrusions. Collectively, these results emphasize the potential of photosensitized two-photon hydrogel ablation as a high-precision tool for laser-guided biofabrication of 3D cellular networks in vitro. STATEMENT OF SIGNIFICANCE: The inaccessible nature of osteocyte networks in bones renders fundamental research on skeletal biology a major challenge. This limit is partly due to the lack of high-resolution tools that can manipulate the pericellular environment in 3D cultures in vitro. To create bone-like cellular networks, we employ a two-photon laser in combination with a two-photon sensitizer to erode microchannels with low laser dosages into GelMA hydrogels. By providing a grid of microchannels, the cells self-organized into a 3D interconnected network within days. Laser-guided formation of 3D networks from single cells at micron-scale resolution is demonstrated for the first time. In future, we envisage in vitro generation of bone cell networks with user-dictated morphologies for both fundamental and translational bone research.

Synthetic biodegradable microporous hydrogels for in vitro 3D culture of functional human bone cell networks.

Generating 3D bone cell networks in vitro that mimic the dynamic process during early bone formation remains challenging. Here, we report a synthetic biodegradable microporous hydrogel for efficient formation of 3D networks from human primary cells, analysis of cell-secreted extracellular matrix (ECM) and microfluidic integration. Using polymerization-induced phase separation, we demonstrate dynamic in situ formation of microporosity (5-20 µm) within matrix metalloproteinase-degradable polyethylene glycol hydrogels in the presence of living cells. Pore formation is triggered by thiol-Michael-addition crosslinking of a viscous precursor solution supplemented with hyaluronic acid and dextran. The resulting microporous architecture can be fine-tuned by adjusting the concentration and molecular weight of dextran. After encapsulation in microporous hydrogels, human mesenchymal stromal cells and osteoblasts spread rapidly and form 3D networks within 24 hours. We demonstrate that matrix degradability controls cell-matrix remodeling, osteogenic differentiation, and deposition of ECM proteins such as collagen. Finally, we report microfluidic integration and proof-of-concept osteogenic differentiation of 3D cell networks under perfusion on chip. Altogether, this work introduces a synthetic microporous hydrogel to efficiently differentiate 3D human bone cell networks, facilitating future in vitro studies on early bone development.

Carbapenem-resistant Klebsiella pneumoniae capsular types, antibiotic resistance and virulence factors in China: a longitudinal, multi-centre study.

Epidemiological knowledge of circulating carbapenem-resistant Klebsiella pneumoniae (CRKP) is needed to develop effective strategies against this public health threat. Here we present a longitudinal analysis of 1,017 CRKP isolates recovered from patients from 40 hospitals across China between 2016 and 2020. Virulence gene and capsule typing revealed expansion of CRKP capsule type KL64 (59.5%) alongside decreases in KL47 prevalence. Hypervirulent CRKP increased in prevalence from 28.2% in 2016 to 45.7% in 2020. Phylogenetic and spatiotemporal analysis revealed Beijing and Shanghai as transmission hubs accounting for differential geographical prevalence of KL47 and KL64 strains across China. Moderate frequency capsule or O-antigen loss was also detected among isolates. Non-capsular CRKP were more susceptible to phagocytosis, attenuated during mouse infections, but showed increased serum resistance and biofilm formation. These findings give insight into CRKP serotype prevalence and dynamics, revealing the importance of monitoring serotype shifts for the future development of immunological strategies against CRKP infections.

Tomographic volumetric bioprinting of heterocellular bone-like tissues in seconds.

Tomographic volumetric bioprinting (VBP) has recently emerged as a powerful tool for rapid solidification of cell-laden hydrogel constructs within seconds. However, its practical applications in tissue engineering requires a detailed understanding of how different printing parameters (concentration of resins, laser dose) affect cell activity and tissue formation. Herein, we explore a new application of VBP in bone tissue engineering by merging a soft gelatin methacryloyl (GelMA) bioresin (<5 kPa) with 3D endothelial co-culture to generate heterocellular bone-like constructs with enhanced functionality. To this, a series of bioresins with varying concentrations of GelMA and lithium Phenyl(2,4,6-trimethylbenzoyl)phosphinate (LAP) photoinitiator were formulated and characterized in terms of photo-reactivity, printability and cell-compatibility. A bioresin with 5% GelMA and 0.05% LAP was identified as the optimal formulation for VBP of complex perfusable constructs within 30 s at high cell viability (>90%). The fidelity was validated by micro-computed tomography and confocal microscopy. Compared to 10% GelMA, this bioresin provided a softer and more permissive environment for osteogenic differentiation of human mesenchymal stem cells (hMSCs). The expression of osteoblastic markers (collagen-I, ALP, osteocalcin) and osteocytic markers (podoplanin, Dmp1) was monitored for 42 days. After 21 days, early osteocytic markers were significantly increased in 3D co-cultures of hMSCs with human umbilical vein endothelial cells (HUVECs). Additionally, we demonstrate VBP of a perfusable, pre-vascularized model where HUVECs self-organized into an endothelium-lined channel. Altogether, this work leverages the benefits of VBP and 3D co-culture, offering a promising platform for fast scaled biofabrication of 3D bone-like tissues with unprecedented functionality. STATEMENT OF SIGNIFICANCE: This study explores new strategies for ultrafast bio-manufacturing of bone tissue models by leveraging the advantages of tomographic volumetric bioprinting (VBP) and endothelial co-culture. After screening the properties of a series of photocurable gelatin methacryloyl (GelMA) bioresins, a formulation with 5% GelMA was identified with optimal printability and permissiveness for osteogenic differentiation of human mesenchymal stem cells (hMSC). We then established 3D endothelial co-cultures to test if the heterocellular interactions may enhance the osteogenic differentiation in the printed environments. This hypothesis was evidenced by increased gene expression of early osteocytic markers in 3D co-cultures after 21 days. Finally, VBP of a perfusable cell-laden tissue construct is demonstrated for future applications in vascularized tissue engineering.