RESUMEN
Large phylogeographic studies on lichens are scarce, and none involves a single species within which different lineages show fixed alternative dispersal strategies. We investigated Bryoria fuscescens (including B. capillaris) in Europe and western North Africa by phenotypically characterizing 1400 specimens from 64 populations and genotyping them with 14 microsatellites. We studied population structure and genetic diversity at the local and continental scales, discussed the post-glacial phylogeography, and compared dispersal capacities of phenotypes with and without soralia. Our main hypothesis is that the estimated phylogeography, migration routes, and dispersal capacities may be strongly biased by ancestral shared alleles. Scandinavia is genetically the richest area, followed by the Iberian Peninsula, the Carpathians, and the Alps. Three gene pools were detected: two partially linked to phenotypic characteristics, and the third one genetically related to the American sister species B. pseudofuscescens. The comparison of one gene pool producing soredia and one not, suggested both as panmictic, with similar levels of isolation by distance (IBD). The migration routes were estimated to span from north to south, in disagreement with the assessed glacial refugia. The presence of ancestral shared alleles in distant populations can explain the similar IBD levels found in both gene pools while producing a false signal of panmixia, and also biasing the phylogeographic reconstruction. The incomplete lineage sorting recorded for DNA sequence loci also supports this hypothesis. Consequently, the high diversity in Scandinavia may rather come from recent immigration into northern populations than from an in situ diversification. Similar patterns of ancestral shared polymorphism may bias the phylogeographical reconstruction of other lichen species.
Asunto(s)
Líquenes , Alelos , Europa (Continente) , Variación Genética , Líquenes/genética , Repeticiones de Microsatélite , Parmeliaceae , Filogenia , FilogeografíaRESUMEN
Objective: The objective of this study is to examine the association of country of residence with body mass index (BMI) between Mexican and Colombian patients exposed to antipsychotics. We hypothesize that there will be a significant association between country of residence and BMI and that Mexican patients will have higher BMI than their Colombian counterparts.Design: The International Study of Latinos on Antipsychotics (ISLA) is a multisite, international, cross sectional study of adult Latino patients exposed to antipsychotics in two Latin American Countries (i.e. Mexico and Colombia). Data were collected from a total of 205 patients (149 from Mexico and 56 from Colombia). The sites in Mexico included outpatient clinics in Mexicali, Monterrey and Tijuana. In Colombia, data were collected from outpatient clinics in Bogotá. For this study we included patients attending outpatient psychiatric community clinics that received at least one antipsychotic (new and old generation) for the last 3 months. A linear regression model was used to determine the association of country of residence with BMI for participants exposed to an antipsychotic.Results: After controlling for demographics, behaviors, biological and comorbid psychiatric variables, there was a significant difference between Colombia vs. Mexico in the BMI of patients exposed to antipsychotics (ß = 4.9; p < 0.05).Conclusion: Our hypotheses were supported. These results suggest that differences in BMI in patients exposed to antipsychotics in Mexico and Colombia may reflect differences in prevalence of overweight/obesity at the population level in the respective countries, and highlights the involvement of other risk factors, which may include genetics.
Asunto(s)
Antipsicóticos/uso terapéutico , Índice de Masa Corporal , Hispánicos o Latinos/estadística & datos numéricos , Obesidad/epidemiología , Adulto , Colombia/epidemiología , Estudios Transversales , Femenino , Humanos , Masculino , México/epidemiología , Persona de Mediana Edad , Prevalencia , Características de la Residencia , Factores de RiesgoRESUMEN
Until recently, superhydrophobicity was considered as a hint to predict surface icephobicity, an association of concepts that is by no means universal and that has been proven to depend on different experimental factors and material properties, including the actual morphology and chemical state of surfaces. This work presents a systematic study of the wetting and freezing properties of aluminum Al6061, a common material widely used in aviation, after being subjected to nanosecond pulsed IR laser treatments to modify its surface roughness and morphology. All treated samples, independent of their surface finishing state, presented initially an unstable hydrophilic wetting behavior that naturally evolved with time to reach hydrophobicity or even superhydrophobicity. To stabilize the surface state and to bestow the samples with a permanent and stable hydrophobic character, laser-treated surfaces were covered with a thin layer of CF x prepared by plasma-enhanced chemical vapor deposition. A systematic comparison between freezing delay (FD) and wetting properties of water droplets onto these plasma-/polymer-modified laser-treated surfaces that, under conditions where a heterogeneous nucleation mechanism prevails, surface morphology rather than the actual value of the surface roughness parameter the key feature for long FD times. In particular, it is found that surface morphologies rendering a Cassie-Baxter wetting regime longer FDs than those characterized by a Wenzel-like wetting state. It is that laser treatment, with or without additional coverage with thin CF x coatings, affects wetting and ice formation behaviors and might be an efficient procedure to mitigate icing problems on metal surfaces.
RESUMEN
Herein, we present the development of supported organic nanofabrics formed by a conformal polymer-like interconnection of small-molecule organic nanowires and nanotrees. These organic nanostructures are fabricated by a combination of vacuum and plasma-assisted deposition techniques to generate step by step, single-crystalline organic nanowires forming one-dimensional building blocks, organic nanotrees applied as three-dimensional templates, and the polymer-like shell that produces the final fabric. The complete procedure is carried out at low temperatures and is compatible with an ample variety of substrates (polymers, metal, ceramics; either planar or in the form of meshes) yielding flexible and low solid-fraction three-dimensional nanostructures. The systematic investigation of this progressively complex organic nanomaterial delivers key clues relating their wetting, nonwetting, and anti-icing properties with their specific morphology and outer surface composition. Water contact angles higher than 150° are attainable as a function of the nanofabric shell thickness with outstanding freezing-delay times (FDT) longer than 2 h at -5 °C. The role of the extremely low roughness of the shell surface is settled as a critical feature for such an achievement. In addition, the characteristic interconnected microstructure of the nanofabrics is demonstrated as ideal for the fabrication of slippery liquid-infused porous surfaces (SLIPS). We present the straightforward deposition of the nanofabric on laser patterns and the knowledge of how this approach provides SLIPS with FDTs longer than 5 h at -5 °C and 1 h at -15 °C.
RESUMEN
One-dimensional (1D) nanostructured surfaces based on high-density arrays of nanowires and nanotubes of photoactive titanium dioxide (TiO2) present a tunable wetting behavior from superhydrophobic to superhydrophilic states. These situations are depicted in a reversible way by simply irradiating with ultraviolet light (superhydrophobic to superhydrophilic) and storage in dark. In this article, we combine in situ environmental scanning electron microscopy (ESEM) and near ambient pressure photoemission analysis (NAPP) to understand this transition. These experiments reveal complementary information at microscopic and atomic level reflecting the surface wettability and chemical state modifications experienced by these 1D surfaces upon irradiation. We pay special attention to the role of the water condensation mechanisms and try to elucidate the relationship between apparent water contact angles of sessile drops under ambient conditions at the macroscale with the formation of droplets by water condensation at low temperature and increasing humidity on the nanotubes' surfaces. Thus, for the as-grown nanotubes, we reveal a metastable and superhydrophobic Cassie state for sessile drops that tunes toward water dropwise condensation at the microscale compatible with a partial hydrophobic Wenzel state. For the UV-irradiated surfaces, a filmwise wetting behavior is observed for both condensed water and sessile droplets. NAPP analyses show a hydroxyl accumulation on the as-grown nanotubes surfaces during the exposure to water condensation conditions, whereas the water filmwise condensation on a previously hydroxyl enriched surface is proved for the superhydrophilic counterpart.
RESUMEN
Four new lichenicolous Tremella species are described and characterized morphologically and molecularly. Tremella celata grows on Ramalina fraxinea, inducing the formation of inconspicuous galls, and having hyphae with incomplete clamps. Tremella endosporogena develops intrahymenially in the apothecia of Lecanora carpinea, having single-celled basidia and clampless hyphae. Tremella diederichiana is the name proposed for a species micromorphologically close to T. christiansenii but inducing the formation of small, pale galls on the thallus and apothecia of Lecidea aff. erythrophaea Tremella variae grows on Lecanora varia thallus, instead of on the apothecia, as do the other known Tremella species parasitizing Lecanora s.l. Phylogenetic relationships and host specificity of these species are investigated and compared with other taxa that show morphological resemblances, phylogenetic affinities or similar hosts. The formation of mitotic conidia inside old basidia (endospores), which is a poorly known reproductive strategy in the Basidiomycota, is also a distinctive character of Tremella endosporogena A discussion on the reproductive role and systematic implications of endospores is included.
Asunto(s)
Basidiomycota/clasificación , Basidiomycota/fisiología , Líquenes/microbiología , Basidiomycota/citología , Basidiomycota/genética , Filogenia , Especificidad de la EspecieRESUMEN
We studied the evolutionary history of the Parmeliaceae (Lecanoromycetes, Ascomycota), one of the largest families of lichen-forming fungi with complex and variable morphologies, also including several lichenicolous fungi. We assembled a six-locus data set including nuclear, mitochondrial and low-copy protein-coding genes from 293 operational taxonomic units (OTUs). The lichenicolous lifestyle originated independently three times in lichenized ancestors within Parmeliaceae, and a new generic name is introduced for one of these fungi. In all cases, the independent origins occurred c. 24 million yr ago. Further, we show that the Paleocene, Eocene and Oligocene were key periods when diversification of major lineages within Parmeliaceae occurred, with subsequent radiations occurring primarily during the Oligocene and Miocene. Our phylogenetic hypothesis supports the independent origin of lichenicolous fungi associated with climatic shifts at the Oligocene-Miocene boundary. Moreover, diversification bursts at different times may be crucial factors driving the diversification of Parmeliaceae. Additionally, our study provides novel insight into evolutionary relationships in this large and diverse family of lichen-forming ascomycetes.
Asunto(s)
Evolución Biológica , Genes Fúngicos , Líquenes/genética , Parmeliaceae/genética , Filogenia , Simbiosis , ClasificaciónRESUMEN
Silver nanoparticles (NPs) depicting well defined surface plasmon resonance (SPR) absorption were deposited on flat substrates by physical vapor deposition in a glancing angle configuration. The particles were characterized by scanning electron microscopy and atomic force microscopy and their optical properties examined by UV-vis absorption spectroscopy using linearly polarized light. It was found that, depending on the amount of deposited silver and the evaporation angle, part of the 'as-prepared' samples present NPs characterized by an anisotropic shape and a polarization dependent SPR absorption and different colors when using polarized white light at 0° and 90°. Low-power irradiation of these materials with an infrared Nd-YAG nanosecond laser in ambient conditions produced an enhancement in such dichroism. At higher powers, the dichroism was lost and the SPR bands shifted to lower wavelengths as a result of the reshaping of the silver NPs in the form of spheres. The possible factors contributing to the observed changes in dichroism are discussed.
Asunto(s)
Dicroismo Circular/métodos , Cristalización/métodos , Rayos Láser , Nanopartículas del Metal/química , Plata/química , Luz , Ensayo de Materiales , Nanopartículas del Metal/efectos de la radiación , Tamaño de la Partícula , Dispersión de Radiación , Plata/efectos de la radiación , Propiedades de SuperficieRESUMEN
Light trapping effects are known to boost the photocatalytic degradation of organic molecules in 3D photonic structures of anatase titania (a-TiO2) with an inverse opal configuration. In the present work, we show that photocatalytic activity can also be enhanced in a-TiO2 thin films if they are incorporated within a nanoporous 1D optical resonant microcavity. We have designed and manufactured multilayer systems that, presenting a high open porosity to enable a straightforward diffusion of photodegradable molecules, provide light confinement effects at wavelengths around the absorption edge of photoactive a-TiO2. In brief, we have observed that a nanoporous 1D Bragg microcavity prepared by electron beam evaporation at oblique angles comprising a central defect layer of nanoporous a-TiO2 boosts the photocatalytic degradation of nitrobenzene and methyl orange dye solutions. The multilayer structure of the microcavity was designed to ensure the appearance of optical resonances at the a-TiO2 layer location and wavelengths around the absorption onset of this semiconductor. In this porous 1D Bragg microcavity, the diffusion constraints of molecules through the capping layers covering the a-TiO2 are effectively compensated by an increase in the photocatalytic activity due to the light confinement phenomena. We also report that the absorption coefficient of methyl orange dye solution infiltrated within the pore structure of the microcavity is exalted at the wavelengths of the corresponding optical resonances. This effect gives rise to a small but non-negligible visible light photodegradation of dye molecules. The possibilities of tailoring the design of 1D photonic systems to boost the photocatalytic activity of a-TiO2 are discussed.
RESUMEN
Solid-state dewetting (SSD) on patterned substrates is a straightforward method for fabricating ordered arrays of metallic nanoparticles on surfaces. However, a drawback of this procedure is that the patterning of substrates usually requires time-consuming and expensive two-dimensional (2D) fabrication methods. Nanostructured thin films deposited by oblique angle deposition (OAD) present at the surface a form of stochastically arranged periodic bundles of nanocolumns that might act as a patterned template for fabricating arrays of nanoparticles by SSD. In this work, we explore this concept and investigate the effect of three different types of OAD SiO2 thin films on the SSD of Au deposited on their surface. We demonstrate that the size and spatial distribution of the particles can be tailored through the surface morphology of these OAD film substrates. It has been found that the SSD of the evaporated Au layer gives rise to a bimodal size distribution of particles. A majority of them appeared as mesoparticles with sizes â³100 nm and the rest as nanoparticles with â¼10 nm, respectively, located either on top of the nanocolumns following their lateral distribution (i.e., resulting from a patterning effect) or incorporated inside the open mesopores existing among them. Moreover, on the SiO2-OAD thin films where interconnected nanocolumnar bundles arrange in the form of discrete motifs, the patterning effect gave rise to the formation of approximately one Au mesoparticle per motif, which is one of the assets of patterned SSD. The morphological, optical (i.e., plasmon resonance), and crystalline structural characteristics of Au mesoparticles suggest that the interplay between a discontinuous nanocolumnar surface acting as a template and the poor adhesion of Au onto SiO2 are key factors for the observed template effect controlling the SSD on the surface of OAD thin films.
RESUMEN
Carbon dioxide reforming of methane and direct decomposition of methanol have been investigated using dielectric barrier discharges (DBD) at atmospheric pressure and reduced working temperatures. Two different plasma reactor configurations are compared and special attention is paid to the influence of the surface roughness of the electrodes on the conversion yields in the first plasma device. The influence of different filling gap dielectric materials (i.e., Al(2)O(3) or BaTiO(3)) in the second packed configuration has been also evaluated. Depending on the experimental conditions of applied voltage, residence time of reactants, feed ratios, or reactor configuration, different conversion yields are achieved ranging from 20 to 80% in the case of methane and 7-45% for the carbon dioxide. The direct decomposition of methanol reaches 60-100% under similar experimental conditions. Interestingly, the selectivity toward the production of hydrogen and carbon monoxide is kept almost constant under all the experimental conditions, and the formation of longer hydrocarbon chains or coke as a byproduct is not detected. The maximum efficiency yields are observed for the packed-bed reactor configuration containing alumina for both reaction processes (approximately 1 mol H(2) per kilowatt hour for dry reforming of methane and approximately 4.5 mol H(2) per kilowatt hour for direct decomposition of methanol).
RESUMEN
In this study, the deterioration effects of lichens and other lithobionts in a temperate mesothermal climate were explored. We examined samples of dolostone and limestone rocks with visible signs of biodeterioration taken from the exterior wall surfaces of four Romanesque churches in Segovia (Spain): San Lorenzo, San Martín, San Millán and La Vera Cruz. Biofilms developing on the lithic substrate were analyzed by scanning electron microscopy. The most common lichen species found in the samples were recorded. Fungal cultures were then obtained from these carbonate rocks and characterized by sequencing Internal Transcribed Spacers (ITS). Through scanning electron microscopy in back-scattered electron mode, fungi (lichenized and non-lichenized) were observed as the most frequent microorganisms occurring at sites showing signs of biodeterioration. The colonization process was especially conditioned by the porosity characteristics of the stone used in these buildings. While in dolostones, microorganisms mainly occupied spaces comprising the rock's intercrystalline porosity, in bioclastic dolomitized limestones, fungal colonization seemed to be more associated with moldic porosity. Microbial biofilms make close contact with the substrate, and thus probably cause significant deterioration of the underlying materials. We describe the different processes of stone alteration induced by fungal colonization and discuss the implications of these processes for the design of treatments to prevent biodeterioration.
Asunto(s)
Materiales de Construcción/parasitología , Hongos/patogenicidad , Líquenes/patogenicidad , Biodegradación Ambiental , Biopelículas , Clima , Hongos/clasificación , Hongos/ultraestructura , Líquenes/clasificación , Líquenes/ultraestructura , Microscopía Electrónica de Rastreo , EspañaRESUMEN
Taxonomic identifications in some groups of lichen-forming fungi have been challenge largely due to the scarcity of taxonomically relevant features and limitations of morphological and chemical characters traditionally used to distinguish closely related taxa. Delineating species boundaries in closely related species or species complexes often requires a range of multisource data sets and comprehensive analytical methods. Here we aim to examine species boundaries in a group of saxicolous lichen forming fungi, the Aspiciliella intermutans complex (Megasporaceae), widespread mainly in the Mediterranean. We gathered DNA sequences of the nuclear ribosomal internal transcribed spacer (nuITS), the nuclear large subunit (nuLSU), the mitochondrial small subunit (mtSSU) ribosomal DNA, and the DNA replication licensing factor MCM7 from 80 samples mostly from Iran, Caucasia, Greece and eastern Europe. We used a combination of phylogenetic strategies and a variety of empirical, sequence-based species delimitation approaches to infer species boundaries in this group. The latter included: the automatic barcode gap discovery (ABGD), the multispecies coalescent approach *BEAST and Bayesian Phylogenetics and Phylogeography (BPP) program. Different species delimitation scenarios were compared using Bayes factors species delimitation analysis. Furthermore, morphological, chemical, ecological and geographical features of the sampled specimens were examined. Our study uncovered cryptic species diversity in A. intermutans and showed that morphology-based taxonomy may be unreliable, underestimating species diversity in this group of lichens. We identified a total of six species-level lineages in the A. intermutans complex using inferences from multiple empirical operational criteria. We found little corroboration between morphological and ecological features with our proposed candidate species, while secondary metabolite data do not corroborate tree topology. The present study on the A. intermutans species-complex indicates that the genus Aspiciliella, as currently circumscribed, is more diverse in Eurasia than previously expected.
Asunto(s)
Ascomicetos/clasificación , Ascomicetos/genética , Líquenes/genética , Núcleo Celular/genética , Código de Barras del ADN Taxonómico/métodos , ADN de Hongos/genética , Líquenes/clasificación , Región Mediterránea , Fenotipo , Filogenia , Filogeografía , Análisis de Secuencia de ADN , Especificidad de la EspecieRESUMEN
Based on an already tested laboratory procedure, a new magnetron sputtering methodology to simultaneously coat two-sides of large area implants (up to ~15 cm2) with Ti nanocolumns in industrial reactors has been developed. By analyzing the required growth conditions in a laboratory setup, a new geometry and methodology have been proposed and tested in a semi-industrial scale reactor. A bone plate (DePuy Synthes) and a pseudo-rectangular bone plate extracted from a patient were coated following the new methodology, obtaining that their osteoblast proliferation efficiency and antibacterial functionality were equivalent to the coatings grown in the laboratory reactor on small areas. In particular, two kinds of experiments were performed: Analysis of bacterial adhesion and biofilm formation, and osteoblasts-bacteria competitive in vitro growth scenarios. In all these cases, the coatings show an opposite behavior toward osteoblast and bacterial proliferation, demonstrating that the proposed methodology represents a valid approach for industrial production and practical application of nanostructured titanium coatings.
RESUMEN
Colletotrichum graminicola causes maize anthracnose, an agronomically important disease with a worldwide distribution. We have identified a fungalysin metalloprotease (Cgfl) with a role in virulence. Transcriptional profiling experiments and live cell imaging show that Cgfl is specifically expressed during the biotrophic stage of infection. To determine whether Cgfl has a role in virulence, we obtained null mutants lacking Cgfl and performed pathogenicity and live microscopy assays. The appressorium morphology of the null mutants is normal, but they exhibit delayed development during the infection process on maize leaves and roots, showing that Cgfl has a role in virulence. In vitro chitinase activity assays of leaves infected with wild-type and null mutant strains show that, in the absence of Cgfl, maize leaves exhibit increased chitinase activity. Phylogenetic analyses show that Cgfl is highly conserved in fungi. Similarity searches, phylogenetic analysis and transcriptional profiling show that C. graminicola encodes two LysM domain-containing homologues of Ecp6, suggesting that this fungus employs both Cgfl-mediated and LysM protein-mediated strategies to control chitin signalling.
Asunto(s)
Colletotrichum/patogenicidad , Secuencia Conservada , Proteínas Fúngicas/metabolismo , Metaloproteasas/metabolismo , Enfermedades de las Plantas/microbiología , Zea mays/microbiología , Secuencia de Aminoácidos , Quitina , Colletotrichum/genética , Colletotrichum/crecimiento & desarrollo , Evolución Molecular , Proteínas Fúngicas/química , Proteínas Fúngicas/genética , Regulación Fúngica de la Expresión Génica , Genoma Fúngico , Hifa/metabolismo , Metaloproteasas/química , Metaloproteasas/genética , Microscopía Confocal , Mutación/genética , Filogenia , Hojas de la Planta/microbiología , Raíces de Plantas/citología , Raíces de Plantas/microbiología , Proteolisis , Homología de Secuencia de Ácido Nucleico , VirulenciaRESUMEN
UV nanosecond laser pulses have been used to produce a unique surface nanostructuration of Ag@ZnO supported nanorods (NRs). The NRs were fabricated by plasma enhanced chemical vapor deposition (PECVD) at low temperature applying a silver layer as promoter. The irradiation of these structures with single nanosecond pulses of an ArF laser produces the melting and reshaping of the end of the NRs that aggregate in the form of bundles terminated by melted ZnO spherical particles. Well-defined silver nanoparticles (NPs), formed by phase separation at the surface of these melted ZnO particles, give rise to a broad plasmonic response consistent with their anisotropic shape. Surface enhanced Raman scattering (SERS) in the as-prepared Ag@ZnO NRs arrays was proved by using a Rhodamine 6G (Rh6G) chromophore as standard analyte. The surface modifications induced by laser treatment improve the stability of this system as SERS substrate while preserving its activity.
RESUMEN
ITO thin films have been prepared by electron beam evaporation at oblique angles (OA), directly and while assisting their growth with a downstream plasma. The films microstructure, characterized by scanning electron microscopy, atomic force microscopy, and glancing incidence small-angle X-ray scattering, consisted of tilted and separated nanostructures. In the plasma assisted films, the tilting angle decreased and the nanocolumns became associated in the form of bundles along the direction perpendicular to the flux of evaporated material. The annealed films presented different in-depth and sheet resistivity as confirmed by scanning conductivity measurements taken for the individual nanocolumns. In addition, for the plasma-assisted thin films, two different sheet resistance values were determined by measuring along the nanocolumn bundles or the perpendicular to it. This in-plane anisotropy induces the electrochemical deposition of elongated gold nanostructures. The obtained Au-ITO composite thin films were characterized by anisotropic plasmon resonance absorption and a dichroic behavior when examined with linearly polarized light.
RESUMEN
Species recognition in lichen-forming fungi has been a challenge because of unsettled species concepts, few taxonomically relevant traits, and limitations of traditionally used morphological and chemical characters for identifying closely related species. Here we analyze species diversity in the cosmopolitan genus Protoparmelia s.l. The ~25 described species in this group occur across diverse habitats from the boreal-arctic/alpine to the tropics, but their relationship to each other remains unexplored. In this study, we inferred the phylogeny of 18 species currently assigned to this genus based on 160 specimens and six markers: mtSSU, nuLSU, ITS, RPB1, MCM7, and TSR1. We assessed the circumscription of species-level lineages in Protoparmelia s. str. using two coalescent-based species delimitation methods--BP&P and spedeSTEM. Our results suggest the presence of a tropical and an extra-tropical lineage, and eleven previously unrecognized distinct species-level lineages in Protoparmelia s. str. Several cryptic lineages were discovered as compared to phenotype-based species delimitation. Many of the putative species are supported by geographic evidence.
Asunto(s)
Ascomicetos/fisiología , Biodiversidad , Líquenes/microbiología , Secuencia de Bases , Teorema de Bayes , Núcleo Celular/genética , Sitios Genéticos , Funciones de Verosimilitud , Modelos Genéticos , Filogenia , Reproducibilidad de los Resultados , Especificidad de la EspecieRESUMEN
A taxonomic study of the species with nutant, pleurotoid and cyphelloid basidiomata of the genus Arrhenia in the Iberian Peninsula is presented. This study is based on the examination of recent specimens collected in the field and from dried herbarium collections. Five species and one variety of this genus are recognized on the basis of morphological and ecological features: Arrhenia acerosa var. acerosa, A. acerosa var. tenella, A. auriscalpium, A. lobata, A. retiruga and A. spathulata. Arrhenia auriscalpium is new to Spain, where it is not restricted to alpine zones of the Eurosiberian region and is more common in the Mediterranean region than previously reported. In contrast, A. acerosa var. tenella currently is known from the Eurosiberian subalpine belt and represents the first report to the Iberian Peninsula, and A. retiruga is known only from the mesomediterranean to supramediterranean belts of the Mediterranean region. Arrhenia acerosa var. acerosa, A. lobata and A. spathulata are widespread in both the Eurosiberian and the Mediterranean regions. Non-Iberian materials of A. acerosa var. tenella and A. spathulata also were studied for comparison. Cyphella cochlearis var. subsessilis, Dictyolus lagunae, Leptoglossum muscigenum var. azonum and Pleurotellus acerosus var. tenellus are lectotypified. Cyphella cochlearis var. subssesilis, Dictyolus lagunae and Leptoglossum muscigenum var. azonum are synonymized with Arrhenia spathulata, and Cyphella cochlearis var. auriformis is placed in synonymy with A. auriscalpium. These taxa are illustrated, described and discussed, based on Iberian material with emphasis on features of the basidioma, pigment of the pileipellis, presence or absence of clamps and shape and size of the basidiospores. A diagnostic key also is given.
RESUMEN
PREMISE OF THE STUDY: The locally rare, haploid, lichen-forming fungi Bryoria capillaris, B. fuscescens, and B. implexa are associated with boreal forests and belong to Bryoria sect. Implexae. Recent phylogenetic studies consider them to be conspecific. Microsatellite loci were developed to study population structure in Bryoria sect. Implexae and its response to ecosystem disturbances. ⢠METHODS AND RESULTS: We developed 18 polymorphic microsatellite markers using 454 pyrosequencing data assessed in 82 individuals. The number of alleles per locus ranged from two to 13 with an average of 4.6. Nei's unbiased gene diversity, averaged over loci, ranged from 0.38 to 0.52. The markers amplified with all three species, except for markers Bi05, Bi15, and Bi18. ⢠CONCLUSIONS: The new markers will allow the study of population subdivision, levels of gene introgression, and levels of clonal spread of Bryoria sect. Implexae. They will also facilitate an understanding of the effects of forest disturbance on genetic diversity of these lichen species.