Role of the clathrin terminal domain in regulating coated pit dynamics revealed by small molecule inhibition.

Clathrin-mediated endocytosis (CME) regulates many cell physiological processes such as the internalization of growth factors and receptors, entry of pathogens, and synaptic transmission. Within the endocytic network, clathrin functions as a central organizing platform for coated pit assembly and dissociation via its terminal domain (TD). We report the design and synthesis of two compounds named pitstops that selectively block endocytic ligand association with the clathrin TD as confirmed by X-ray crystallography. Pitstop-induced inhibition of clathrin TD function acutely interferes with receptor-mediated endocytosis, entry of HIV, and synaptic vesicle recycling. Endocytosis inhibition is caused by a dramatic increase in the lifetimes of clathrin coat components, including FCHo, clathrin, and dynamin, suggesting that the clathrin TD regulates coated pit dynamics. Pitstops provide new tools to address clathrin function in cell physiology with potential applications as inhibitors of virus and pathogen entry and as modulators of cell signaling.

Functional compensation in a savanna scavenger community.

Functional redundancy, the potential for the functional role of one species to be fulfilled by another, is a key determinant of ecosystem viability. Scavenging transfers huge amount of energy through ecosystems and is, therefore, crucial for ecosystem viability and healthy ecosystem functioning. Despite this, relatively few studies have examined functional redundancy in scavenger communities. Moreover, the results of these studies are mixed and confined to a very limited range of habitat types and taxonomic groups. This study attempts to address this knowledge gap by conducting a field experiment in an undisturbed natural environment assessing functional roles and redundancy in vertebrate and invertebrate scavenging communities in a South African savanna. We used a large-scale field experiment to suppress ants in four 1 ha plots in a South African savanna and paired each with a control plot. We distributed three types of small food bait: carbohydrate, protein and seed, across the plots and excluded vertebrates from half the baits using cages. Using this combination of ant suppression and vertebrate exclusion, allowed us explore the contribution of non-ant invertebrates, ants and vertebrates in scavenging and also to determine whether either ants or vertebrates were able to compensate for the loss of one another. In this study, we found the invertebrate community carried out a larger proportion of overall scavenging services than vertebrates. Moreover, although scavenging was reduced when either invertebrates or vertebrates were absent, the presence of invertebrates better mitigated the functional loss of vertebrates than did the presence of vertebrates against the functional loss of invertebrates. There is a commonly held assumption that the functional role of vertebrate scavengers exceeds that of invertebrate scavengers; our results suggest that this is not true for small scavenging resources. Our study highlights the importance of invertebrates for securing healthy ecosystem functioning both now and into the future. We also build upon many previous studies which show that ants can have particularly large effects on ecosystem functioning. Importantly, our study suggests that scavenging in some ecosystems may be partly resilient to changes in the scavenging community, due to the potential for functional compensation by vertebrates and ants.

Research Experiences via Integrating Simulations and Experiments (REVISE): A Model Collaborative Research Project for Undergraduate Students in CO2 Sorbent Design.

Undergraduate research experiences are an instrumental component of student development, increasing conceptual understanding, promoting inquiry-based learning, and guiding potential career aspirations. Moving one step further, as research continues to become more interdisciplinary, there exists potential to accelerate student growth by granting additional perspectives through collaborative research. This study demonstrates the utilization of a model collaborative research project, specifically investigating the development of sorbent technologies for efficient CO2 capture, which is an important research area for improving environmental sustainability. A model CO2 sorbent system of heteroatom-doped porous carbon is utilized to enable students to gain knowledge of adsorption processes, through combined experimental and computational investigations and learnings. A particular emphasis is placed on creating interdisciplinary learning experiences, exemplified by using density functional theory (DFT) to understand molecular interactions between doped carbon surfaces and CO2 molecules as well as explain underlying physical mechanisms that govern experimental results. The experimental observations about CO2 sorption performance of doped ordered mesoporous carbons (OMCs) can be correlated with simulation results, which can explain how the presence of heteroatom functional groups impact the ability of porous carbon to selectively adsorb CO2 molecules. Through an inquiry-focused approach, students were observed to couple interdisciplinary results to construct holistic explanations, while developing skills in independent research and scientific communications. This collaborative research project allows students to obtain a deeper understanding of sustainability challenges, cultivate confidence in independent research, prepare for future career paths, and most importantly, be exposed to strategies employing interdisciplinary research approaches to address scientific challenges.

Fluorescence Resonance Energy Transfer Measurements in Polymer Science: A Review.

Fluorescence resonance energy transfer (FRET) is a non-invasive characterization method for studying molecular structures and dynamics, providing high spatial resolution at nanometer scale. Over the past decades, FRET-based measurements are developed and widely implemented in synthetic polymer systems for understanding and detecting a variety of nanoscale phenomena, enabling significant advances in polymer science. In this review, the basic principles of fluorescence and FRET are briefly discussed. Several representative research areas are highlighted, where FRET spectroscopy and imaging can be employed to reveal polymer morphology and kinetics. These examples include understanding polymer micelle formation and stability, detecting guest molecule release from polymer host, characterizing supramolecular assembly, imaging composite interfaces, and determining polymer chain conformations and their diffusion kinetics. Finally, a perspective on the opportunities of FRET-based measurements is provided for further allowing their greater contributions in this exciting area.

Environmental, Health, and Legislation Considerations for Rational Design of Nonreactive Flame-Retardant Additives for Polymeric Materials: Future Perspectives.

Increasing polymer usage has demanded functional additives that decrease fire hazards for end users. While traditional flame-retardant (FR) additives, such as halogenated, phosphorus, and metal hydroxides, greatly reduce flammability and associated fire hazards, research has continually exposed a litany of health and environmental safety concerns. This perspective aims to identify the key components of a successful FR additive and address material, environmental, and health concerns of existing additives. Legislation surrounding FRs and persistent organic pollutants is also discussed to highlight political perception that has resulted in the increased chemical regulations and subsequent banning of FR additives. Finally, future directions of this field regarding nonreactive additives, focusing on the use of bioinspired materials and transition metal chemistries to produce alternatives for polymers with efficacies surpassing traditional additives are presented.

Caries in children with and without orofacial clefting: A systematic review and meta-analysis.

This systematic review compared children's primary dentition caries experience for those with cleft lip and/or palate (CL/P) and without. Four databases were searched without date restriction for; cross-sectional studies comparing caries experience for children with CL/P to those without. Screening, data extraction and risk assessment were carried out independently (in duplicate). Meta-analyses used a random-effects model. Twenty studies (21 reports) fitting the inclusion criteria comprised 4647 children in primary dentition from 12 countries. For dmft (n = 3016 children; 15 groups), CL/P mean = 3.2; standard deviation = 2.22 and no CL/P mean dmft = 2.5; sd 1.53. For dmfs (n = 1095 children; 6 groups), CL/P mean = 4; sd = 3.5 and no CL/P mean = 3; sd = 2.8. For % caries experience (n = 1094 children; 7 groups), CL/P mean = 65%; sd = 20.8 and no CL/P mean = 52%; sd = 28.1. Meta-analysis showed higher caries experience in children with CL/P, standardised mean difference = 0.46; 95% CI = 0.15, 0.77. Studies' risk of bias was high (n = 7), medium (n-10) and low (n = 3). Children with CL/P had higher caries experience compared to those without CLP.

Acceptability of the Brushing RemInder 4 Good oral HealTh (BRIGHT) trial intervention: a qualitative study of perspectives of young people and school staff.

BACKGROUND: The Brushing RemInder 4 Good oral HealTh (BRIGHT) trial is investigating the clinical and cost-effectiveness of a multi-component behaviour change intervention to reduce the prevalence of dental caries in young people from deprived areas aged 11-13 years. Mobile health has gained popularity in delivering behaviour change interventions for improving oral health. The intervention, based on behaviour change theory, consists of two components; a single classroom-based session embedded in the school curriculum and a series of follow-up text messages (SMS) delivered twice daily to participants. This element of the process evaluation aimed to explore the acceptability of the BRIGHT intervention for pupils and school staff. METHODS: Qualitative study, based on the concept of acceptability. Focus groups were conducted with 50 pupils, from six secondary schools across the UK, who had received the intervention. Semi-structured interviews were conducted with 12 members of staff. Purposive maximum variation sampling was used. Interviews were transcribed verbatim and analysed using a framework approach. RESULTS: In line with the theoretical framework of acceptability, affective attitude, perceived effectiveness, ethicality, burden and self-efficacy were identified as factors that affect the acceptability of the BRIGHT intervention. Pupil participants appreciated learning about the consequences of inadequate brushing particularly the photographs of carious teeth during the classroom-based session. More detailed information on brushing techniques and follow-up lessons on oral health were recommended by pupils. In terms of the SMS, the data suggest that pupil participants found them to be helpful reminders for brushing their teeth. To further improve acceptability, more choice over the timing of the messages and greater interactivity to reduce tedium were suggested. Staff participants recognised the value of the lesson and reported that in general the content was suitable for their pupils. Having the lesson material prepared for them, having the necessary support and whether it was included in the curriculum, were factors that improved acceptability. CONCLUSION: Overall, pupils and staff found the BRIGHT intervention acceptable and made some suggestions which could be adopted in any subsequent implementation of the intervention.

Dynamin 2-dependent endocytosis is essential for mouse oocyte development and fertility.

During folliculogenesis, oocytes are dependent on metabolic and molecular support from surrounding somatic cells. Here, we examined the role of the dynamin (DNM) family of mechanoenzymes in mediating endocytotic uptake into growing follicular oocytes. We found DNM1 and DNM2 to be highly expressed in growing follicular oocytes as well as in mature germinal vesicle (GV) and metaphase II (MII) stage oocytes. Moreover, oocyte-specific conditional knockout (cKO) of DNM2 (DNM2Δ) led to complete sterility, with follicles arresting at the preantral stage of development. In addition, DNM2Δ ovaries were characterized by disrupted follicular growth as well as oocyte and follicle apoptosis. Further, the loss of DNM activity, either through DNM2 cKO or through pharmacological inhibition (Dyngo 6a) led to the impairment of endocytotic pathways in preantral oocytes as well as in mature GV and MII oocytes, respectively. Loss of DNM activity resulted in the redistribution of endosomes and the misslocalization of clathrin and actin, suggesting dysfunctional endocytosis. Notably, there was no observable effect on the fertility of DNM1Δ females. Our study has provided new insight into the complex and dynamic nature of oocyte growth during folliculogenesis, suggesting a role for DNM2 in mediating the endocytotic events that are essential for oocyte development.

Developing Anisotropy in Self-Assembled Block Copolymers: Methods, Properties, and Applications.

Block copolymers (BCPs) self-assembly has continually attracted interest as a means to provide bottom-up control over nanostructures. While various methods have been demonstrated for efficiently ordering BCP nanodomains, most of them do not generically afford control of nanostructural orientation. For many applications of BCPs, such as energy storage, microelectronics, and separation membranes, alignment of nanodomains is a key requirement for enabling their practical use or enhancing materials performance. This review focuses on summarizing research progress on the development of anisotropy in BCP systems, covering a variety of topics from established aligning techniques, resultant material properties, and the associated applications. Specifically, the significance of aligning nanostructures and the anisotropic properties of BCPs is discussed and highlighted by demonstrating a few promising applications. Finally, the challenges and outlook are presented to further implement aligned BCPs into practical nanotechnological applications, where exciting opportunities exist.

Interventions for treating cavitated or dentine carious lesions.

BACKGROUND: Traditionally, cavitated carious lesions and those extending into dentine have been treated by 'complete' removal of carious tissue, i.e. non-selective removal and conventional restoration (CR). Alternative strategies for managing cavitated or dentine carious lesions remove less or none of the carious tissue and include selective carious tissue removal (or selective excavation (SE)), stepwise carious tissue removal (SW), sealing carious lesions using sealant materials, sealing using preformed metal crowns (Hall Technique, HT), and non-restorative cavity control (NRCC). OBJECTIVES: To determine the comparative effectiveness of interventions (CR, SE, SW, sealing of carious lesions using sealant materials or preformed metal crowns (HT), or NRCC) to treat carious lesions conventionally considered to require restorations (cavitated or micro-cavitated lesions, or occlusal lesions that are clinically non-cavitated but clinically/radiographically extend into dentine) in primary or permanent teeth with vital (sensitive) pulps. SEARCH METHODS: An information specialist searched four bibliographic databases to 21 July 2020 and used additional search methods to identify published, unpublished and ongoing studies.  SELECTION CRITERIA: We included randomised clinical trials comparing different levels of carious tissue removal, as listed above, against each other, placebo, or no treatment. Participants had permanent or primary teeth (or both), and vital pulps (i.e. no irreversible pulpitis/pulp necrosis), and carious lesions conventionally considered to need a restoration (i.e. cavitated lesions, or non- or micro-cavitated lesions radiographically extending into dentine). The primary outcome was failure, a composite measure of pulp exposure, endodontic therapy, tooth extraction, and restorative complications (including resealing of sealed lesions). DATA COLLECTION AND ANALYSIS: Pairs of review authors independently screened search results, extracted data, and assessed the risk of bias in the studies and the overall certainty of the evidence using GRADE criteria. We measured treatment effects through analysing dichotomous outcomes (presence/absence of complications) and expressing them as odds ratios (OR) with 95% confidence intervals (CI). For failure in the subgroup of deep lesions, we used network meta-analysis to assess and rank the relative effectiveness of different interventions. MAIN RESULTS: We included 27 studies with 3350 participants and 4195 teeth/lesions, which were conducted in 11 countries and published between 1977 and 2020. Twenty-four studies used a parallel-group design and three were split-mouth. Two studies included adults only, 20 included children/adolescents only and five included both. Ten studies evaluated permanent teeth, 16 evaluated primary teeth and one evaluated both. Three studies treated non-cavitated lesions; 12 treated cavitated, deep lesions, and 12 treated cavitated but not deep lesions or lesions of varying depth.  Seventeen studies compared conventional treatment (CR) with a less invasive treatment: SE (8), SW (4), two HT (2), sealing with sealant materials (4) and NRCC (1). Other comparisons were: SE versus HT (2); SE versus SW (4); SE versus sealing  with sealant materials (2); sealant materials versus no sealing (2).  Follow-up times varied from no follow-up (pulp exposure during treatment) to 120 months, the most common being 12 to 24 months. All studies were at overall high risk of bias. Effect of interventions Sealing using sealants versus other interventions for non-cavitated or cavitated but not deep lesions There was insufficient evidence of a difference between sealing with sealants and CR (OR 5.00, 95% CI 0.51 to 49.27; 1 study, 41 teeth, permanent teeth, cavitated), sealing versus SE (OR 3.11, 95% CI 0.11 to 85.52; 2 studies, 82 primary teeth, cavitated) or sealing versus no treatment (OR 0.05, 95% CI 0.00 to 2.71; 2 studies, 103 permanent teeth, non-cavitated), but we assessed all as very low-certainty evidence. HT, CR, SE, NRCC for cavitated, but not deep lesions in primary teeth The odds of failure may be higher for CR than HT (OR 8.35, 95% CI 3.73 to 18.68; 2 studies, 249 teeth; low-certainty evidence) and lower for HT than NRCC (OR 0.19, 95% CI 0.05 to 0.74; 1 study, 84 teeth, very low-certainty evidence). There was insufficient evidence of a difference between SE versus HT (OR 8.94, 95% CI 0.57 to 139.67; 2 studies, 586 teeth) or CR versus NRCC (OR 1.16, 95% CI 0.50 to 2.71; 1 study, 102 teeth), both very low-certainty evidence. CR, SE, SW for deep lesions The odds of failure were higher for CR than SW in permanent teeth (OR 2.06, 95% CI 1.34 to 3.17; 3 studies, 398 teeth; moderate-certainty evidence), but not primary teeth (OR 2.43, 95% CI 0.65 to 9.12; 1 study, 63 teeth; very low-certainty evidence). The odds of failure may be higher for CR than SE in permanent teeth (OR 11.32, 95% CI 1.97 to 65.02; 2 studies, 179 teeth) and primary teeth (OR 4.43, 95% CI 1.04 to 18.77; 4 studies, 265 teeth), both very low-certainty evidence. Notably, two studies compared CR versus SE in cavitated, but not deep lesions, with insufficient evidence of a difference in outcome (OR 0.62, 95% CI 0.21 to 1.88; 204 teeth; very low-certainty evidence). The odds of failure were higher for SW than SE in permanent teeth (OR 2.25, 95% CI 1.33 to 3.82; 3 studies, 371 teeth; moderate-certainty evidence), but not primary teeth (OR 2.05, 95% CI 0.49 to 8.62; 2 studies, 126 teeth; very low-certainty evidence). For deep lesions, a network meta-analysis showed the probability of failure to be greatest for CR compared with SE, SW and HT. AUTHORS' CONCLUSIONS: Compared with CR, there were lower numbers of failures with HT and SE in the primary dentition, and with SE and SW in the permanent dentition. Most studies showed high risk of bias and limited precision of estimates due to small sample size and typically limited numbers of failures, resulting in assessments of low or very low certainty of evidence for most comparisons.

COVID-19 in Australia: our national response to the first cases of SARS-CoV-2 infection during the early biocontainment phase.

BACKGROUND: On 31 December 2019, the World Health Organization recognised clusters of pneumonia-like cases due to a novel coronavirus disease (COVID-19). COVID-19 became a pandemic 71 days later. AIM: To report the clinical and epidemiological features, laboratory data and outcomes of the first group of 11 returned travellers with COVID-19 in Australia. METHODS: This is a retrospective, multi-centre case series. All patients with confirmed COVID-19 infection were admitted to tertiary referral hospitals in New South Wales, Queensland, Victoria and South Australia. RESULTS: The median age of the patient cohort was 42 years (interquartile range (IQR), 24-53 years) with six men and five women. Eight (72.7%) patients had returned from Wuhan, one from Shenzhen, one from Japan and one from Europe. Possible human-to-human transmission from close family contacts in gatherings overseas occurred in two cases. Symptoms on admission were fever, cough and sore throat (n = 9, 81.8%). Co-morbidities included hypertension (n = 3, 27.3%) and hypercholesterolaemia (n = 2, 18.2%). No patients developed severe acute respiratory distress nor required intensive care unit admission or mechanical ventilation. After a median hospital stay of 14.5 days (IQR, 6.75-21), all patients were discharged. CONCLUSIONS: This is a historical record of the first COVID-19 cases in Australia during the early biocontainment phase of the national response. These findings were invaluable for establishing early inpatient and outpatient COVID-19 models of care and informing the management of COVID-19 over time as the outbreak evolved. Future research should extend this Australian case series to examine global epidemiological variation of this novel infection.

Solar Photooxygenations for the Manufacturing of Fine Chemicals-Technologies and Applications.

Photooxygenation reactions involving singlet oxygen (1O2) are utilized industrially as a mild and sustainable access to oxygenated products. Due to the usage of organic dyes as photosensitizers, these transformations can be successfully conducted using natural sunlight. Modern solar chemical reactors enable outdoor operations on the demonstration (multigram) to technical (multikilogram) scales and have subsequently been employed for the manufacturing of fine chemicals such as fragrances or biologically active compounds. This review will highlight examples of solar photooxygenations for the manufacturing of industrially relevant target compounds and will discuss current challenges and opportunities of this sustainable methodology.

Development of a secondary school-based digital behaviour change intervention to improve tooth brushing.

BACKGROUND: Dental caries in adolescents remains a significant public health problem with few oral health promotion interventions aimed at reducing dental caries in secondary school-aged students. Previous oral health and mobile health (mHealth) research has suggested the need for the development of a school-based behaviour change intervention incorporating a digital component. This study aimed to describe the development process of a behaviour change intervention to improve the oral health of students aged 11-16 years attending secondary schools in the UK. METHODS: A six-step process was used to develop the complex intervention informed by behaviour change theory and involving students, young people, parents and teachers in the process. The steps were: (1) identifying the target behaviours, namely tooth brushing with a fluoride toothpaste (2) identifying the theoretical basis and developing the causal model (3) reviewing the relevant literature and developing the logic model (4) designing the intervention with young people, parents and school staff (5) specifying the intervention content and (6) translating this content into features of the intervention and piloting. RESULTS: The resultant intervention included a quality-assured classroom-based session (CBS) (guided by a lesson plan and teaching resources), delivered by school teachers which was embedded within the school curriculum. This CBS was followed by a series of (Short Message Service) SMS texts delivered twice daily to student's mobile telephones with the content, duration and timing of the messages informed by involvement of students and young people. CONCLUSIONS: An intervention to improve the oral health of secondary school students through improved tooth brushing was rigorously developed based on behaviour change theory and work with young people, parents and school staff. Further research is needed to evaluate the outcomes and processes involved following the delivery of this intervention. BRIGHT Trial Trial Registration ISRCTN12139369.

Stronger regional biosecurity is essential to prevent hundreds of harmful biological invasions.

Biological invasions often transcend political boundaries, but the capacity of countries to prevent invasions varies. How this variation in biosecurity affects the invasion risks posed to the countries involved is unclear. We aimed to improve the understanding of how the biosecurity of a country influences that of its neighbours. We developed six scenarios that describe biological invasions in regions with contiguous countries. Using data from alien species databases, socio-economic and biodiversity data and species distribution models, we determined where 86 of 100 of the world's worst invasive species are likely to invade and have a negative impact in the future. Information on the capacity of countries to prevent invasions was used to determine whether such invasions could be avoided. For the selected species, we predicted 2,523 discrete invasions, most of which would have significant negative impacts and are unlikely to be prevented. Of these invasions, approximately a third were predicted to spread from the country in which the species first establishes to neighbouring countries where they would cause significant negative impacts. Most of these invasions are unlikely to be prevented as the country of first establishment has a low capacity to prevent invasions or has little incentive to do so as there will be no impact in that country. Regional biosecurity is therefore essential to prevent future harmful biological invasions. In consequence, we propose that the need for increased regional co-operation to combat biological invasions be incorporated in global biodiversity targets.

Coronavirus disease (COVID-19): Characteristics in children and considerations for dentists providing their care.

The emergence of the novel virus severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) causing coronavirus disease (COVID-19) has led to a global pandemic and one of the most significant challenges to the healthcare profession. Dental practices are focal points for cross-infection, and care must be taken to minimise the risk of infection to, from, or between dental care professionals and patients. The COVID-19 epidemiological and clinical characteristics are still being collated but children's symptoms seem to be milder than those that adults experience. It is unknown whether certain groups, for example children with comorbidities, might be at a higher risk of more severe illness. Emerging data on disease spread in children, affected by COVID-19, have not been presented in detail. The purpose of this article was to report current data on the paediatric population affected with COVID-19 and highlight considerations for dentists providing care for children during this pandemic. All members of the dental team have a professional responsibility to keep themselves informed of current guidance and be vigilant in updating themselves as recommendations are changing so quickly.

Cost-effectiveness of child caries management: a randomised controlled trial (FiCTION trial).

BACKGROUND: A three-arm parallel group, randomised controlled trial set in general dental practices in England, Scotland, and Wales was undertaken to evaluate three strategies to manage dental caries in primary teeth. Children, with at least one primary molar with caries into dentine, were randomised to receive Conventional with best practice prevention (C + P), Biological with best practice prevention (B + P), or best practice Prevention Alone (PA). METHODS: Data on costs were collected via case report forms completed by clinical staff at every visit. The co-primary outcomes were incidence of, and number of episodes of, dental pain and/or infection avoided. The three strategies were ranked in order of mean cost and a more costly strategy was compared with a less costly strategy in terms of incremental cost-effectiveness. Costs and outcomes were discounted at 3.5%. RESULTS: A total of 1144 children were randomised with data on 1058 children (C + P n = 352, B + P n = 352, PA n = 354) used in the analysis. On average, it costs £230 to manage dental caries in primary teeth over a period of up to 36 months. Managing children in PA was, on average, £19 (97.5% CI: -£18 to £55) less costly than managing those in B + P. In terms of effectiveness, on average, there were fewer incidences of, (- 0.06; 97.5% CI: - 0.14 to 0.02) and fewer episodes of dental pain and/or infection (- 0.14; 97.5% CI: - 0.29 to 0.71) in B + P compared to PA. C + P was unlikely to be considered cost-effective, as it was more costly and less effective than B + P. CONCLUSIONS: The mean cost of a child avoiding any dental pain and/or infection (incidence) was £330 and the mean cost per episode of dental pain and/or infection avoided was £130. At these thresholds B + P has the highest probability of being considered cost-effective. Over the willingness to pay thresholds considered, the probability of B + P being considered cost-effective never exceeded 75%. TRIAL REGISTRATION: The trial was prospectively registered with the ISRCTN (reference number ISRCTN77044005) on the 26th January 2009 and East of Scotland Research Ethics Committee provided ethical approved (REC reference: 12/ES/0047).

Thermoregulatory traits combine with range shifts to alter the future of montane ant assemblages.

Predicting and understanding the biological response to future climate change is a pressing challenge for humanity. In the 21st century, many species will move into higher latitudes and higher elevations as the climate warms. In addition, the relative abundances of species within local assemblages are likely to change. Both effects have implications for how ecosystems function. Few biodiversity forecasts, however, take account of both shifting ranges and changing abundances. We provide a novel analysis predicting the potential changes to assemblage-level relative abundances in the 21st century. We use an established relationship linking ant abundance and their colour and size traits to temperature and UV-B to predict future abundance changes. We also predict future temperature driven range shifts and use these to alter the available species pool for our trait-mediated abundance predictions. We do this across three continents under a low greenhouse gas emissions scenario (RCP2.6) and a business-as-usual scenario (RCP8.5). Under RCP2.6, predicted changes to ant assemblages by 2100 are moderate. On average, species richness will increase by 26%, while species composition and relative abundance structure will be 26% and 30% different, respectively, compared with modern assemblages. Under RCP8.5, however, highland assemblages face almost a tripling of species richness and compositional and relative abundance changes of 66% and 77%. Critically, we predict that future assemblages could be reorganized in terms of which species are common and which are rare: future highland assemblages will not simply comprise upslope shifts of modern lowland assemblages. These forecasts reveal the potential for radical change to montane ant assemblages by the end of the 21st century if temperature increases continue. Our results highlight the importance of incorporating trait-environment relationships into future biodiversity predictions. Looking forward, the major challenge is to understand how ecosystem processes will respond to compositional and relative abundance changes.

Low levels of intraspecific trait variation in a keystone invertebrate group.

The trait-based approach to ecology promises to provide a mechanistic understanding of species distributions and ecosystem functioning. Typically, trait analyses focus on average species trait values and assume that intraspecific variation is small or negligible. Recent work has shown, however, that intraspecific trait variation can often contribute substantially to total trait variation. Whilst many studies have investigated intraspecific variation in plants, very few have done so for invertebrates. There is no research on the level of intraspecific trait variation in ants (Hymenoptera: Formicidae), despite the fact that there is a growing body of literature using ant morphological trait data and demonstrating that these insects play important roles in many ecosystems and food webs. Here, we investigate the intraspecific variability of four commonly used ant morphological traits from 23 species from the Maloti-Drakensberg Mountains of southern Africa. In total, we measured 1145 different individuals and made 6870 trait measurements. Intraspecific variation accounted for only 1-4% of total trait variation for each of the four traits we analysed. We found no links between intraspecific variation, phylogeny and elevation. On average, six individuals generated robust species means but under biased sampling scenarios 20 individuals were needed. The low levels of intraspecific morphological variation that we find suggest that the approach of using mean species traits is valid, in this fauna at least. Regardless, we encourage ant trait ecologists to measure greater numbers of individuals, especially across gradients, to shed further light on intraspecific variation in this functionally important group of insects.

Continuous Flow Photochemical and Thermal Multi-Step Synthesis of Bioactive 3-Arylmethylene-2,3-Dihydro-1H-Isoindolin-1-Ones.

An effective multi-step continuous flow approach towards N-diaminoalkylated 3-arylmethylene-2,3-dihydro-1H-isoindolin-1-ones, including the local anesthetic compound AL-12, has been realized. Compared to the traditional decoupled batch processes, the combined photochemical-thermal-thermal flow setup rapidly provides the desired target compounds in superior yields and significantly shorter reaction times.

Dental caries experience, care index and restorative index in children with learning disabilities and children without learning disabilities; a systematic review and meta-analysis.

BACKGROUND: Children with learning disabilities (CLD) have worse health outcomes than children with no learning disabilities (CNLD). This systematic review compared caries experience and met dental care need for CLD to CNLD using Decayed, Missing, Filled Permanent Teeth (DMFT) and decayed, missing/extracted, filled primary teeth (dmft/deft), care index (CI), and restorative index (RI) values. METHODS: Without date or language restrictions four databases were searched for; cross-sectional studies comparing caries experience and CI/ RI in CLD matched to groups of CNLD. Screening and data extraction were carried out independently and in duplicate. Risk of bias was assessed using the Newcastle-Ottawa Scale. Meta-analyses were carried out (random effects model). RESULTS: There were 25 articles with 3976 children (1 to 18 years old), from 18 countries, fitting the inclusion criteria. Children with; Down syndrome were investigated in 11 studies, autism in 8 and mixed learning disabilities in 6. The overall mean DMFT for CLD was 2.31 (standard deviation±1.97; range 0.22 to 7.2) and for CNLD was 2.51 (±2.14; 0.37 to 4.76). Using standardised mean difference (SMD), meta-analysis showed no evidence of a difference between CLD and CNLD (n = 16 studies) for caries experience (SMD = -0.43; 95%CI = -0.91 to 0.05). This was similar for sub-groups of children with autism (SMD = -0.28; 95%CI = 1.31 to 0.75) and mixed disabilities (SMD = 0.26; 95%CI = -0.94 to 1.47). However, for children with Down syndrome, caries experience was lower for CLD than CNLD (SMD = -0.73; 95%CI = -1.28 to - 0.18). For primary teeth, mean dmft/deft was 2.24 for CLD and 2.48 for CNLD (n = 8 studies). Meta-analyses showed no evidence of a difference between CLD and CNLD for caries experience across all disability groups (SMD = 0.41; 95% CI = -0.14 to 0.96), or in sub-groups: Down syndrome (SMD = 0.55; 95%CI- = - 0.40 to 1.52), autism (SMD = 0.43; 95%CI = -0.53 to 2.39) and mixed disabilities (SMD = -0.10; 95%CI = -0.34 to 0.14). The studies' risk of bias were medium to high. CONCLUSION: There was no evidence of a difference in caries levels in primary or permanent dentitions for CLD and CNLD. This was similar for learning disability sub-groups, except for Down syndrome where dental caries levels in permanent teeth was lower. Data on met need for dental caries was inconclusive. TRIAL REGISTRATION: The protocol was published in PROSPERO: CRD42017068964 (June 8th, 2017).