Microretroreflector-sedimentation immunoassays for pathogen detection.

Point-of-care detection of pathogens is medically valuable but poses challenging trade-offs between instrument complexity and clinical and analytical sensitivity. Here we introduce a diagnostic platform utilizing lithographically fabricated micron-scale forms of cubic retroreflectors, arguably one of the most optically detectable human artifacts, as reporter labels for use in sensitive immunoassays. We demonstrate the applicability of this novel optical label in a simple assay format in which retroreflector cubes are first mixed with the sample. The cubes are then allowed to settle onto an immuno-capture surface, followed by inversion for gravity-driven removal of nonspecifically bound cubes. Cubes bridged to the capture surface by the analyte are detected using inexpensive, low-numerical aperture optics. For model bacterial and viral pathogens, sensitivity in 10% human serum was found to be 10(4) bacterial cells/mL and 10(4) virus particles/mL, consistent with clinical utility.

Improved recovery of bacteriophage M13 using an ATPS-based bioprocess.

Aqueous two-phase systems (ATPS) have been widely exploited for the recovery and partial purification of biological compounds. Recently our research group characterized the primary recovery and partial purification of bacteriophage M13 using polymer-salt and ionic liquid-salt ATPS. From such study, it was concluded that PEG 400-potassium phosphate ATPS with a volume ratio (VR ) of 1 and 25% w/w TLL were the best suitable for the primary recovery of bacteriophage M13 from a crude extract, achieving a recovery yield of 83.3%. Although such system parameters were proven to be adequate for the recovery of the product of interest, it was concluded that further optimization was desirable and attainable by studying the effect of additional system parameters such as VR , concentration of neutral salt (M) and sample load (% w/w). This research work presents an optimization of a previously reported process for the recovery of bacteriophage M13 directly from a crude extract using ATPS. The increase in VR and sample load showed a positive effect in the recovery of M13 indicating an improved performance of the proposed ATPS. According to the results presented here, a system composed of PEG 400 17.2% (w/w), potassium phosphate 15.5% (w/w) and a sample load of 30% (w/w) allowed the recovery of M13 directly from a crude extract with a top phase recovery of 80.1%, representing an increase of 4.8 times in the final concentration and a reduction of 2.65 times in the processing costs. © 2018 American Institute of Chemical Engineers Biotechnol. Prog., 2018 © 2018 American Institute of Chemical Engineers Biotechnol. Prog., 34:1177-1184, 2018.

Factorial and Economic Evaluation of an Aqueous Two-Phase Partitioning Pilot Plant for Invertase Recovery From Spent Brewery Yeast.

Aqueous two-phase systems (ATPS) have been reported as an attractive biocompatible extraction system for recovery and purification of biological products. In this work, the implementation, characterization, and optimization (operational and economic) of invertase extraction from spent brewery yeast in a semi-automatized pilot plant using ATPS is reported. Gentian violet was used as tracer for the selection of phase composition through phase entrainment minimization. Yeast suspension was chosen as a complex cell matrix model for the recovery of the industrial relevant enzyme invertase. Flow rates of phases did not have an effect, given that a bottom continuous phase is given, while load of sample and number of agitators improved the recovery of the enzyme. The best combination of factors reached a recovery of 129.35 ± 2.76% and a purification factor of 4.98 ± 1.10 in the bottom phase of a PEG-Phosphate system, also resulting in the removal of inhibitor molecules increasing invertase activity as reported by several other authors. Then, an economic analysis was performed to study the production cost of invertase analyzing only the significant parameters for production. Results indicate that the parameters being analyzed only affect the production cost per enzymatic unit, while variations in the cost per batch are not significant. Moreover, only the sample load is significant, which, combined with operational optimization results, gives the same optimal result for operation, maximizing recovery yield (15% of sample load and 1 static mixer). Overall res ults of these case studies show continuous pilot-scale ATPS as a viable and reproducible extraction/purification system for high added-value biological compounds.

Genetic manipulation of microalgae for the production of bioproducts.

Microalgae have been used during the past four decades in the Bio-industries for the production of high added value products and development of useful approaches with environmental applications. The fast growing rate, simple growth requirements and using sunlight as the major source of energy are the key factors for usage of algae. In the past 15 years, a considerable progress has been made regarding the use of microalgae for production of proteins, nutraceuticals, food supplements, molecular tags for diagnostics and fixation of greenhouse gases. Nevertheless, genetic manipulation of microalgae still remains a fairly un-explored area which could boost the production of bioproducts. It is anticipated that in the near future use of microalgae will revolutionize its applications in diverse industries. The aim of this work is to present a critical review on potential of microalgae for the production of high-added value molecules, their practical applications, and the role of genetic engineering in its utilization as a unique niche in industry. In addition, current challenges within synthetic biology approaches are discussed.

Marine-Derived Bioactive Peptides for Biomedical Sectors: A Review.

Marine-based resources such as algae and other marine by-products have been recognized as rich sources of structurally diverse bioactive peptides. Evidently, their structural characteristics including unique amino acid residues are responsible for their biological activity. Several of the above-mentioned marine-origin species show multi-functional bioactivities that are useful for a new discovery and/or reinvention of biologically active ingredients, nutraceuticals and/or pharmaceuticals. Therefore, in recent years, marine-derived bioactive peptides have gained a considerable attention with high-value biomedical and/or pharmaceutical potentials. Furthermore, a wider spectrum of bioactive peptides can be produced through proteolytic-assisted hydrolysis of various marine resources under controlled physicochemical (pH and temperature of the reaction media) environment. Owing to their numerous health-related beneficial effects and therapeutic potential in the treatment and/or prevention of many diseases, such marine-derived bioactive peptides exhibit a wider spectrum of biological activities such as anti-cancerous, anti-proliferative, anti-coagulant, antibacterial, antifungal, and anti-tumor activities among many others. Based on emerging evidence of marine-derived peptide mining, the above-mentioned marine resources contain noteworthy levels of high-value protein. The present review article mainly summarizes the marine-derived bioactive peptides and emphasizing their potential applications in biomedical and/or pharmaceutical sectors of the modern world. In conclusion, recent literature has provided evidence that marine-derived bioactive peptides play a critical role in human health along with many possibilities of designing new functional nutraceuticals and/or pharmaceuticals to clarify potent mechanisms of action for a wider spectrum of diseases.

Drug Delivery and Cosmeceutical Applications of Poly- Lactic Acid Based Novel Constructs - A Review.

BACKGROUND: Poly (lactic acid) (PLA) based novel constructs have been engineered for targeted applications in various biomedical sectors of the modern world. In this context, a special focus has been given to pharmaceutical and cosmeceutical industries. METHODS: In this review, we extensively reviewed, analyzed and compiled salient information from the authentic bibliographic sources including PubMed, Scopus, Elsevier, Springer, Bentham Science and other scientific databases. A focused review question and inclusion/exclusion criterion were adopted to appraise the quality of retrieved peer-reviewed research literature. RESULTS: Recently, bio-based constructs are being engineered for target applications in different bio- and non-bio sectors of the modern world to address the growing human health-related serious concerns. The utilization of properly designed and structured materials thus allows the creation of a well-defined environment that induces a series of directed measures, and so on. Over the last few years, PLA-based novel constructs have received exceptional attention as potential candidates for various biotechnological and biomedical applications at large and drug delivery in particular. Owing to their unique characteristics including biocompatibility, together with the adjustable thermomechanical and tunable control drug release, PLA has raised interesting applications in many sectors of the medical world. So far, many of such PLA-based bio-constructs have been exploited in drug delivery systems, cosmeceutical products, and therapeutic uses. In recent years, many new applications have been reported for PLA-based materials at the micro- and nano- level, resulting in novel requests for specific drug delivery and cosmeceutical sectors. CONCLUSIONS: In summary, this review summarizes recent research on different aspects of PLA and PLA-based novel constructs and their potential biomedical applications. Moreover, with the aid of nanotechnology, PLA has made a positive impact in emerging sectors such as cosmetics, drug delivery technologies, and healthcare advances.

Economic analysis of pilot-scale production of B-phycoerythrin.

ß-Phycoerythrin is a color protein with several applications, from food coloring to molecular labeling. Depending on the application, different purity is required, affecting production cost and price. Different production and purification strategies for B-phycoerythrin have been developed, the most studied are based on the production using Porphyridium cruentum and purified using chromatographic techniques or aqueous two-phase systems. The use of the latter can result in a less expensive and intensive recovery of the protein, but there is lack of a proper economic analysis to study the effect of using aqueous two-phase systems in a scaled-up process. This study analyzed the production of B-Phycoerythrin using real data obtained during the scale-up of a bioprocess using specialized software (BioSolve, Biopharm Services, UK). First, a sensitivity analysis was performed to identify critical parameters for the production cost, then a Monte Carlo analysis to emulate real processes by adding uncertainty to the identified parameters. Next, the bioprocess was analyzed to determine its financial attractiveness and possible optimization strategies were tested and discussed. Results show that aqueous two-phase systems retain their advantages of low cost and intensive recovery (54.56%); the costs of production per gram calculated (before titer optimization: US$15,709 and after optimization: US$2,374) allowed to obtain profit (in the range of US$millions in a 10-year period) for a potential company taking this production method by comparing the production cost against commercial prices. The bioprocess analyzed is a promising and profitable method for the generation of a highly purified B-phycoerythrin. © 2016 American Institute of Chemical Engineers Biotechnol. Prog., 32:1472-1479, 2016.

A microdevice assisted approach for the preparation, characterization and selection of continuous aqueous two-phase systems: from micro to bench-scale.

Aqueous two-phase systems (ATPS) have emerged as an alternative strategy for the recovery and purification of a wide variety of biological products. Typical process development requires a large screening of experimental conditions towards industrial adoption where continuous processes are preferred. In this work, it was proved that under certain flow conditions, ATPS could be formed continuously inside a microchannel, starting from stocks of phase components. Staggered herringbone chaotic micromixers included within the device sequentially and rapidly prepare two-phase systems across an entire range of useful phase compositions. Two-phase diagrams (binodal curves) were easily plotted using the cloud-point method for systems of different components and compared with previously reported curves for each system, proving that phase formation inside the device correlated with the previously reported diagrams. A proof of concept for sample partitioning in such a microdevice was performed with two different experimental models: BSA and red blood cells. Finally, the microdevice was employed to obtain information about the recovery and partition coefficient of invertase from a real complex mixture of proteins (yeast extract) to design a process for the recovery of the enzyme selecting a suitable system and composition to perform the process at bench-scale.

Flotation Immunoassay: Masking the Signal from Free Reporters in Sandwich Immunoassays.

In this work, we demonstrate that signal-masking reagents together with appropriate capture antibody carriers can eliminate the washing steps in sandwich immunoassays. A flotation immunoassay (FI) platform was developed with horseradish peroxidase chemiluminescence as the reporter system, the dye Brilliant Blue FCF as the signal-masking reagent, and buoyant silica micro-bubbles as the capture antibody carriers. Only reporters captured on micro-bubbles float above the dye and become visible in an analyte-dependent manner. These FIs are capable of detecting proteins down to attomole levels and as few as 10(6) virus particles. This signal-masking strategy represents a novel approach to simple, sensitive and quantitative immunoassays in both laboratory and point-of-care settings.

Spermine Sepharose as a clustered-charge anion exchange adsorbent.

We previously showed that the affinity and capacity of ion exchange adsorbents of a given total charge density are improved by immobilization of the charges in pre-ordered clusters, rather than individually in random locations. This previous work used pentalysinamide and pentaargininamide as clustered ligands. This approach allows close control of cluster size, but is uneconomically expensive for some research and most practical applications. In this work, we demonstrate that the inexpensive synthetic analog of the natural polyamine spermine (H2N-CH2-CH2-CH2-NH-CH2-CH2-CH2-CH2-NH-CH2-CH2-CH2-NH2) also can serve as the basis of effective clustered adsorbents. The calcium-depleted form of the protein α-lactalbumin, and RNA from baker's yeast, were adsorbed on a spermine Sepharose adsorbent. This adsorbent exhibited enhanced α-lactalbumin binding capacity (Qmax>1.6 and 1.3-fold higher than those for Qiagen DEAE and GE DEAE Sepharose adsorbents of much greater charge density) and higher initial binding affinity (Qmax/KD 2.4 and 2.1-fold higher, respectively). The new spermine-based matrix exhibited a higher value of the Z parameter, suggesting an increased number of apparent interaction sites between the protein and the resin, and functioned well in column mode.

Aqueous two-phase affinity partitioning systems: current applications and trends.

Aqueous two-phase systems (ATPS) have been studied and used for product recovery and purification from diverse biological sources. ATPS are characterized by their versatility, easy scale up parameters, process integration capability and relative low cost. This technique is commonly regarded as a primary recovery stage mainly due to its low selectivity. However, the use of strategies involving the modification of ATPS with affinity ligands have resulted in significant increases in recovery yields and purification folds of biological products. The aim of this review is to highlight current applications, trends and challenges regarding affinity partitioning in aqueous two-phase systems for the fractionation, recovery and purification of biological products.