RESUMEN
The vanadium redox flow battery (VRFB) is a highly regarded technology for large-scale energy storage due to its outstanding features, such as scalability, efficiency, long lifespan, and site independence. This paper provides a comprehensive analysis of its performance in carbon-based electrodes, along with a comprehensive review of the system's principles and mechanisms. It discusses potential applications, recent industrial involvement, and economic factors associated with VRFB technology. The study also covers the latest advancements in VRFB electrodes, including electrode surface modification and electrocatalyst materials, and highlights their effects on the VRFB system's performance. Additionally, the potential of two-dimensional material MXene to enhance electrode performance is evaluated, and the author concludes that MXenes offer significant advantages for use in high-power VRFB at a low cost. Finally, the paper reviews the challenges and future development of VRFB technology.
RESUMEN
This study deals with the preparation of activated carbon (CDSP) from date seed powder (DSP) by chemical activation to eliminate polyaromatic hydrocarbon-PAHs (naphthalene-C10H8) from synthetic wastewater. The chemical activation process was carried out using a weak Lewis acid of zinc acetate dihydrate salt (Zn(CH3CO2)2·2H2O). The equilibrium isotherm and kinetics analysis was carried out using DSP and CDSP samples, and their performances were compared for the removal of a volatile organic compound-naphthalene (C10H8)-from synthetic aqueous effluents or wastewater. The equilibrium isotherm data was analyzed using the linear regression model of the Langmuir, Freundlich and Temkin equations. The R2 values for the Langmuir isotherm were 0.93 and 0.99 for naphthalene (C10H8) adsorption using DSP and CDSP, respectively. CDSP showed a higher equilibrium sorption capacity (qe) of 379.64 µg/g. DSP had an equilibrium sorption capacity of 369.06 µg/g for C10H8. The rate of reaction was estimated for C10H8 adsorption using a pseudo-first order, pseudo-second order and Elovich kinetic equation. The reaction mechanism for both the sorbents (CDSP and DSP) was studied using the intraparticle diffusion model. The equilibrium data was well-fitted with the pseudo-second order kinetics model showing the chemisorption nature of the equilibrium system. CDSP showed a higher sorption performance than DSP due to its higher BET surface area and carbon content. Physiochemical characterizations of the DSP and CDSP samples were carried out using the BET surface area analysis, Fourier-scanning microscopic analysis (FSEM), energy-dispersive X-ray (EDX) analysis and Fourier-transform spectroscopic analysis (FTIR). A thermogravimetric and ultimate analysis was also carried out to determine the carbon content in both the sorbents (DSP and CDSP) here. This study confirms the potential of DSP and CDSP to remove C10H8 from lab-scale synthetic wastewater.
Asunto(s)
Ácidos de Lewis/química , Modelos Moleculares , Naftalenos/análisis , Temperatura , Compuestos Orgánicos Volátiles/análisis , Contaminantes Químicos del Agua/análisis , Adsorción , Difusión , Cinética , Modelos Lineales , Nitrógeno/química , Espectrometría por Rayos X , Termogravimetría , Factores de TiempoRESUMEN
The SARS-CoV-2 virus has spread globally and has severely impacted public health and the economy. Hand hygiene, social distancing, and the usage of personal protective equipment are considered the most vital tools in controlling the primary transmission of the virus. Converging evidence indicated the presence of SARS-CoV-2 in wastewater and its persistence over several days, which may create secondary transmission of the virus via waterborne and wastewater pathways. Although, researchers have started focusing on this mode of virus transmission, limited knowledge and societal unawareness of the transmission through wastewater may lead to significant increases in the number of positive cases. To emphasize the severe issue of virus transmission through wastewater and create societal awareness, we present a state of the art critical review on transmission of SARS-CoV-2 in wastewater and the potential remedial strategies to effectively control the viral spread and safeguard society. For low-income countries with high population densities, it is suggested to identify the virus in large scale municipal wastewater plants before following up with one-to-one testing for effective control of the secondary transmission. Ultrafiltration is an effective method for wastewater treatment and usually more than 4 logs of virus removal are achieved while safeguarding good protein permeability. Decentralized wastewater treatment facilities using solar-assisted disinfestation methods are most economical and can be effectively used in hospitals, isolation wards, and medical centers for reducing the risk of transmission from high local concentration sites, especially in tropical countries with abundant solar energy. Disinfection with chlorine, sodium hypochlorite, benzalkonium chloride, and peracetic acid have shown potential in terms of virucidal properties. Biological wastewater treatment using micro-algae will be highly effective in removal of virus and can be incorporated into membrane bio-reaction to achieve excellent virus removal rate. Though promising results have been shown by initial research for inactivation of SARS-CoV-2 in wastewater using physical, chemical and biological based treatment methods, there is a pressing need for extensive investigation of COVID-19 specific disinfectants with appropriate concentrations, their environmental implications, and regular monitoring of transmission. Effective wastewater treatment methods with high virus removal capacity and low treatment costs should be selected to control the virus spread and safeguard society from this deadly virus.
Asunto(s)
COVID-19 , Purificación del Agua , Humanos , Pandemias , SARS-CoV-2 , Aguas ResidualesRESUMEN
Multi-walled carbon nanotubes (MWCNTs) are a contemporary class of nanoparticles that have a prominent thermal, electrical and mechanical properties. There have been numerous studies on the enhancement of thermophysical properties of nanofluids. However, there is only limited research on thermal and stability analysis of MWCNT nanofluids with various kinds of solvents or base fluids, namely propylene glycol, ethanol, ethylene glycol, polyethylene glycol, methanol and water. This paper reports the enhancement of thermophysical properties and stability of MWCNTs with six different base fluids in the presence of sodium dodecyl benzene sulfonate surfactant with a mass concentration of 0.5 wt%. Thermal and dispersion stabilities were determined using a thermogravimetric analyzer (TGA) and Zeta potential, along with a visual inspection method to evaluate the agglomeration or sedimentation of MWCNT nanoparticles over a period of one month. Ultraviolet-visible spectroscopy and Fourier transform infrared spectroscopy were utilized to identify the molecular components and light absorption of the formulated nanofluids at their maximum wavenumber (4500 cm-1) and wavelength (800 nm). In addition, thermophysical properties such as thermal conductivity, specific heat capacity, viscosity and density with a peak temperature of 200 °C were also experimentally evaluated. The TGA results illustrated that MWCNT/ethylene glycol nanofluid achieved maximum thermal stability at 140 °C and it revealed a maximum zeta potential value of -61.8 mV. Thus, ethylene glycol solution was found to be the best base liquid to homogenize with MWCNTs for acquiring an enhanced thermophysical property and a long-term stability.
RESUMEN
Exposure to biomass fuel smoke has detrimental health effects causing chronic diseases. This study investigated the relationship between biomass fuel smoke exposure and hypertension among the rural Bangladeshi women. A total of 410 women aged 19-60 years were enrolled in this study during April-May 2017 who regularly cooked with biomass fuel in traditional cook stove for the past ≥1 year. Self-reported daily cooking hours and lifetime cooking experience of the participants were recorded, and their blood pressure was measured. Participants' age ≥40 years, parental history of hypertension, body mass index ≥25 kg/m2, and cumulative exposure to biomass smoke were found to be the significant risk factors of hypertension. Every 1 year increase in cumulative exposure to biomass smoke eventually exacerbated the risk of hypertension by 61% (adjusted odds ratio 1.61, 95% confidence interval: 1.16-2.22; P < 0.01). This study provides evidence that long-term exposure to biomass fuel smoke is associated with hypertension.
Asunto(s)
Contaminación del Aire Interior/estadística & datos numéricos , Culinaria/métodos , Hipertensión/epidemiología , Población Rural/estadística & datos numéricos , Adulto , Factores de Edad , Bangladesh , Presión Sanguínea , Índice de Masa Corporal , Estudios Transversales , Femenino , Predisposición Genética a la Enfermedad , Humanos , Persona de Mediana Edad , Factores de RiesgoRESUMEN
Since being first published in 2018, the use of two-dimensional MXene in solar cells has attracted significant interest. This study presents, for the first time, the synthesis of an efficient hybrid electrocatalyst in the form of a nanocomposite (MXene/CoS)-SnO2 designed to function as a high-performance electron transfer layer (ETL). The study can be divided into three distinct parts. The first part involves the synthesis of single-layer Ti3C2Tx MXene nanosheets, followed by the preparation of a CoS solution. Subsequently, in the second part, the fabrication of MXene/CoS heterostructure nanocomposites is carried out, and a comprehensive characterization is conducted to evaluate the physical, structural, and optical properties. In the third part, the attention is on the crucial characterizations of the novel nanocomposite-electron transport layer (ETL) solution, significantly contributing to the evolution of perovskite solar cells. Upon optimising the composition, an exceptional power conversion efficiency of more than 17.69% is attained from 13.81% of the control devices with fill factor (FF), short-circuit current density (Jsc), and open-circuit voltage (Voc) were 66.51%, 20.74 mA/cm2, and 1.282 V. Therefore, this PCE is 21.93% higher than the control device. The groundbreaking MXene/CoS (2 mg mL-1) strategy reported in this research represents a promising and innovative avenue for the realization of highly efficient perovskite solar cells.
RESUMEN
Adaptation seeks to transfer and implement healthcare interventions developed and evaluated in one context to another. The aim of this scoping review was to understand current approaches to the adaptation of complex interventions for people with long-term conditions (LTCs) and to identify issues for studies performed in low- and middle-income countries (LMICs). Bibliographic databases were searched from 2000 to October 2022. This review involved five stages: (i) definition of the research question(s); (ii) identifying relevant studies; (iii) study selection; (iv) data charting; and (v) data synthesis. Extraction included an assessment of the: rationale for adaptation; stages and levels of adaptation; use of theoretical frameworks, and quality of reporting using a checklist based on the 2021 ADAPT guidance. Twenty-five studies were included from across 21 LTCs and a range of complex interventions. The majority (16 studies) focused on macro (national or international) level interventions. The rationale for adaptation included intervention transfer across geographical settings [high-income country (HIC) to LMIC: six studies, one HIC to another: eight studies, one LMIC to another: two studies], or transfer across socio-economic/racial groups (five studies), or transfer between different health settings within a single country (one study). Overall, studies were judged to be of moderate reporting quality (median score 23, maximum 46), and typically focused on early stages of adaptation (identification and development) with limited outcome evaluation or implementation assessment of the adapted version of the intervention. Improved reporting of the adaptation for complex interventions targeted at LTCs is needed. Development of future adaptation methods guidance needs to consider the needs and priorities of the LMIC context.
Limited finance and human capacity may reduce access to new treatments for people with long-term conditions. This is especially true in low- and middle-income countries. One solution is to transfer treatments developed in one place for use in other areas. This paper provides a current summary of international research on adapting treatments. We used a checklist to assess study reporting quality, based on published advice. Our findings showed the need for better conduct and reporting of adaptation. Future guidance should consider the specific needs of low- and middle-income countries.
RESUMEN
MXene-based nanofluids are novel trends with improved dispersion stability and thermophysical characteristics over previously established nanofluids. In the present work, the thermohydraulic characteristics of a double pipe heat exchanger (DPHEX) with a Therminol55(TH55)/MXene + Al2O3 nanofluid and various geometrically shaped (triangular, rectangular) ribbed twisted tape (TT) inserts are numerically investigated using the ANSYS Fluent interface. A counter flow arrangement with three different types of inserts (RRTT, TRTT, TT) and TH55/MXene + Al2O3 nanofluid at 0.20 wt% are studied inside the heat exchanger. Adding ribbed inserts to the conventional TT insert enhances the turbulence intensity by creating extra vortices. The thermal boundary layer grows thinner due to increased axial and radial velocity. Due to the substantial flow obstruction, adding ribs increases the overall pressure drop between the inlet and outlet. The maximum increase in Nu is 11.04 % using nanofluid instead of water, whereas the combination of insert and nanofluid exhibited up to 105 % enhancement for rectangular-ribbed TT compared to the plain tube. Nevertheless, the pressure decrease is found to be maximum in rectangular-ribbed TT because of significant flow disruption. This was likewise true with triangular-ribbed TT and TT insert. According to the PEC assessment, the RRTT insert had a maximum PEC value of 1.67 greater than TRTT and traditional TT for both TH55 and nanofluid flowing inside the tube. To summarize, the combination of TH55/MXene + Al2O3 RRTT insert may be a promising choice for improving heat exchanger performance in a new generation efficient thermal system.
RESUMEN
ETHNOPHARMACOLOGICAL RELEVANCE: Lignosus rhinocerus, also known as Tiger Milk Mushroom has been used traditionally to treat a variety of human conditions, including asthma, diabetes, respiratory disease, skin allergy, and food poisoning. The reported activities of Lignosus rhinocerus extracts include anti-inflammatory, anti-oxidant, anti-asthmatic, anti-microbial, anti-cancer, neuroprotection, and immune modulation effects. However, its effect on human skin is not well documented, including human skin exposed to ultraviolet light (UV). Exposure to UV can trigger various cellular responses, including inflammation, oxidative stress, DNA damage, cell death, and cellular aging. AIM OF THE STUDY: The study aims to investigate the effects of methanolic extract prepared from cultured Lignosus rhinocerus (herein referred to as TM02 and its methanol extract as TM02-ME) on UV-irradiated human keratinocytes. MATERIALS AND METHODS: Powdered stock of TM02 was dissolved and sequentially extracted with different solvents to prepare the extracts and the methanol extract was subsequently characterized based on its bio-activities on HaCaT human keratinocytes. The keratinocytes were pre-treated with the methanol extract followed by UV-irradiation. Cellular responses of the HaCaT cells such as cell viability, DNA damage, as well as gene and protein expressions that were responsive to the treatments, were characterized by using bio-assays, including reverse-transcription based PCR, Western blot, cell viability, and mitochondrial Cytochrome C release assays. RESULTS: TM02-ME protected HaCaT cells from UV-induced DNA damage and cell death in a dose-dependent manner. Pre-treatment of HaCaT cells with TM02-ME led to a 39% reduction of cyclobutane pyrimidine dimers (CPD) and up-regulated the gene expression of REV1 and SPINK5 in UVB-irradiated HaCaT cells when compared to the control. In addition, TM-02-ME treated HaCaT cells increased the expression of BCL-XL and BCL-2 proteins which coincided with the down-regulation of mitochondrial Cyt. C release in the UV-B irradiated HaCaT cells. The results were further supported by data that showed the stable clones of HaCaT cells stably expressed BCL-XL were resistant to UVB-induced cell death. CONCLUSIONS: __The results showed that TM02-ME confers photoprotective activities to UVB-irradiated HaCaT cells, leading to a reduction in DNA damage and cell death as well as up-regulated the expression of REV1 and SPINK5 which are involved in DNA repair and skin barrier function, respectively. The up-regulation of pro-survival members of the BCL-2 family by TM02-ME confers protection against UVB-induced cell death.
Asunto(s)
Antiasmáticos , Rayos Ultravioleta , Antiasmáticos/farmacología , Antiinflamatorios/metabolismo , Antiinflamatorios/farmacología , Antioxidantes/metabolismo , Antioxidantes/farmacología , Citocromos c/metabolismo , Humanos , Queratinocitos , Metanol/farmacología , Polyporaceae , Proteínas Proto-Oncogénicas c-bcl-2/metabolismo , Dímeros de Pirimidina/metabolismo , Dímeros de Pirimidina/farmacología , Solventes/farmacología , Rayos Ultravioleta/efectos adversosRESUMEN
This article discusses the design and preparation of a modified MXene-based nanocomposite for increasing the power conversion efficiency and long-term stability of perovskite solar cells. The MXene family of materials among 2D nanomaterials has shown considerable promise in enhancing solar cell performance because of their remarkable surface-enhanced characteristics. Firstly, there are a variety of approaches to making MXene-reinforced composites, from solution mixing to powder metallurgy. In addition, their outstanding features, including high electrical conductivity, Young's modulus, and distinctive shape, make them very advantageous for composite synthesis. In contrast, its excellent chemical stability, electronic conductivity, tunable band gaps, and ion intercalation make it a promising contender for various applications. Photovoltaic devices, which turn sunlight into electricity, are an exciting new area of research for sustainable power. Based on an analysis of recent articles, the hydro-thermal method has been widely used for synthesizing MXene-based nano-composites because of the easiness of fabrication and low cost. Finally, we identify new perspectives for adjusting the performance of MXene for various nanocomposites by controlling the composition of the two-dimensional transition metal MXene phase.
RESUMEN
The paper evaluates the routes towards the evaluation of membranes using ZIF-62 metal organic framework (MOF) nano-hybrid dots for environmental remediation. Optimization of interaction of operating parameters over the rooted membrane is challenging issue. Subsequently, the interaction of operating parameters including temperature, pressure and CO2 gas concentration over the resultant rooted membranes are evaluated and optimized using response surface methodology for environmental remediation. In addition, the stability and effect of hydrocarbons on the performance of the resulting membrane during the gas mixture separation are evaluated at optimum conditions to meet the industrial requirements. The characterization results verified the fabrication of the ZIF-62 MOF rooted composite membrane. The permeation results demonstrated that the CO2 permeability and CO2/CH4 selectivity of the composite membrane was increased from 15.8 to 84.8 Barrer and 12.2 to 35.3 upon integration of ZIF-62 nano-glass into cellulose acetate (CA) polymer. Subsequently, the optimum conditions have been found at a temperature of 30 °C, the pressure of 12.6 bar and CO2 feed concentration of 53.3 vol%. These optimum conditions revealed the highest CO2 permeability, CH4 permeability and CO2/CH4 separation factor of 47.9 Barrer, 0.2 Barrer and 26.8. The presence of hydrocarbons in gas mixture dropped the CO2 permeability of 56.5% and separation factor of 46.4% during 206 h of testing. The separation performance of the composite membrane remained stable without the presence of hydrocarbons for 206 h.
Asunto(s)
Carbono , Contaminantes Ambientales , Dióxido de Carbono , Gases , PolímerosRESUMEN
Since technology progresses, the need to optimize the thermal system's heat transfer efficiency is continuously confronted by researchers. A primary constraint in the production of heat transfer fluids needed for ultra-high performance was its intrinsic poor heat transfer properties. MXene, a novel 2D nanoparticle possessing fascinating properties has emerged recently as a potential heat dissipative solute in nanofluids. In this research, 2D MXenes (Ti3C2) are synthesized via chemical etching and blended with a binary solution containing Diethylene Glycol (DEG) and ionic liquid (IL) to formulate stable nanofluids at concentrations of 0.1, 0.2, 0.3 and 0.4 wt%. Furthermore, the effect of different temperatures on the studied liquid's thermophysical characteristics such as thermal conductivity, density, viscosity, specific heat capacity, thermal stability and the rheological property was experimentally conducted. A computational analysis was performed to evaluate the impact of ionic liquid-based 2D MXene nanofluid (Ti3C2/DEG+IL) in hybrid photovoltaic/thermal (PV/T) systems. A 3D numerical model is developed to evaluate the thermal efficiency, electrical efficiency, heat transfer coefficient, pumping power and temperature distribution. The simulations proved that the studied working fluid in the PV/T system results in an enhancement of thermal efficiency, electrical efficiency and heat transfer coefficient by 78.5%, 18.7% and 6%, respectively.
RESUMEN
Bubble-like domains, typically a precursor to the electrical skyrmions, arise in ultrathin complex oxide ferroelectric-dielectric-ferroelectric heterostructures epitaxially clamped with flat substrates. Here, it is reported that these specially ordered electric dipoles can also be retained in a freestanding state despite the presence of inhomogeneously distributed structural ripples. By probing local piezo and capacitive responses and using atomistic simulations, this study analyzes these ripples, sheds light on how the bubbles are stabilized in the modified electromechanical energy landscape, and discusses the difference in morphology between bubbles in freestanding and as-grown states. These results are anticipated to be the starting point of a new paradigm for the exploration of electric skyrmions with arbitrary boundaries and physically flexible topological orders in ferroelectric curvilinear space.
RESUMEN
In recent years, solar energy technologies have developed an emerging edge. The incessant research to develop a power source alternative to fossil fuel because of its scarcity and detrimental effects on the environment is the main driving force. In addition, nanofluids have gained immense interest as superior heat transfer fluid in solar technologies for the last decades. In this research, a binary solution of ionic liquid (IL) + water based ionanofluids is formulated successfully with two dimensional MXene (Ti3C2) nano additives at three distinct concentrations of 0.05, 0.10, and 0.20 wt % and the optimum concentration is used to check the performance of a hybrid solar PV/T system. The layered structure of MXene and high absorbance of prepared nanofluids have been perceived by SEM and UV-vis respectively. Rheometer and DSC are used to assess the viscosity and heat capacity respectively while transient hot wire technique is engaged for thermal conductivity measurement. A maximum improvement of 47% in thermal conductivity is observed for 0.20 wt % loading of MXene. Furthermore, the viscosity is found to rise insignificantly with addition of Ti3C2 by different concentrations. Conversely, viscosity decreases substantially as the temperature increases from 20 °C to 60 °C. However, based on their thermophysical properties, 0.20 wt % is found to be the optimum concentration. A comparative analysis in terms of heat transfer performance with three different nanofluids in PV/T system shows that, IL+ water/MXene ionanofluid exhibits highest thermal, electrical, and overall heat transfer efficiency compared to water/alumina, palm oil/MXene, and water alone. Maximum electrical efficiency and thermal efficiency are recorded as 13.95% and 81.15% respectively using IL + water/MXene, besides that, heat transfer coefficients are also noticed to increase by 12.6% and 2% when compared to water/alumina and palm oil/MXene respectively. In conclusion, it can be demonstrated that MXene dispersed ionanofluid might be great a prospect in the field of heat transfer applications since they can augment the heat transfer rate considerably which improves system efficiency.
RESUMEN
Due to the increasing demand in industrial application, nanofluids have attracted the considerable attention of researchers in recent decades. The addition of nanocellulose (CNC) with water (W) and ethylene glycol (EG) to a coolant for a radiator application exhibits beneficial properties to improve the efficiency of the radiator. The focus of the present work was to investigate the performance of mono or hybrid metal oxide such as Al2O3 and TiO2 with or without plant base-extracted CNC with varying concentrations as a better heat transfer nanofluid in comparison to distilled water as a radiator coolant. The CNC is dispersed in the base fluid of EG and W with a 60:40 ratio. The highest absorption peak was noticed at 0.9% volume concentration of TiO2, Al2O3, CNC, Al2O3/TiO2, and Al2O3/CNC nanofluids which indicates a better stability of the nanofluids' suspension. Better thermal conductivity improvement was observed for the Al2O3 nanofluids in all mono nanofluids followed by the CNC and TiO2 nanofluids, respectively. The thermal conductivity of the Al2O3/CNC hybrid nanofluids with 0.9% volume concentration was found to be superior than that of the Al2O3/TiO2 hybrid nanofluids. Al2O3/CNC hybrid nanofluid dominates over other mono and hybrid nanofluids in terms of viscosity at all volume concentrations. CNC nanofluids (all volume concentrations) exhibited the highest specific heat capacity than other mono nanofluids. Additionally, in both hybrid nanofluids, Al2O3/CNC showed the lowest specific heat capacity. The optimized volume concentration from the statistical analytical tool was found to be 0.5%. The experimental results show that the heat transfer coefficient, convective heat transfer, Reynolds number and the Nusselt number have a proportional relationship with the volumetric flow rate. Hybrid nanofluids exhibit better thermal conductivity than mono nanofluids. For instance, a better thermal conductivity improvement was shown by the mono Al2O3 nanofluids than the CNC and TiO2 nanofluids. On the other hand, superior thermal conductivity was observed for the Al2O3/CNC hybrid nanofluids compared to the other mono and hybrid ones (Al2O3/TiO2).
RESUMEN
OBJECTIVE: Despite the high magnitude of drowning, medical care-seeking behaviours among drowning casualties remain unexplored in Bangladesh. This study aimed to explore this behaviour among drowning casualties in Bangladesh. METHODS: A population-based cross-sectional study was conducted using a multi-stage cluster sampling method. Data were collected using a structured questionnaire from 299,216 rural and urban residents. RESULTS: From the survey, we found 191 drowning cases: 40.84% (n = 78) were fatal and 59.16% (n = 113) were non-fatal. Among the drowning cases, 71.2% (n = 136) were referred to healthcare providers, while 62.8% (n = 120) received medical care from different health service providers. Further analysis showed that 66.6% (n = 116) of children and 26.6% (n = 4) of adults sought healthcare. As many as 78.9% (n = 120/152) of rural residents sought healthcare, as compared to 61.5% (n = 24/39) of urban residents. Among all drowning casualties, 31.7% (n = 38) received healthcare from a qualified healthcare provider, whereas 68.3% (n = 82) received it from non-qual]ified healthcare providers. About 59 (49%) casualties received care from a pharmacy and 34 (28%) from a recognised hospital. The hospital admission rate for drowning was 11.7%. About 14 (11.7%) drowning casualties were brought to hospitals in motorised or non-motorised vehicles. As many as 97 (80.8%) patients sought healthcare attention and managed to survive. CONCLUSION: A significant number of drowning casualties sought medical care from qualified and non-qualified healthcare providers. In Bangladesh, it is necessary to develop guidelines for providing medical care for drowning casualties.
RESUMEN
Ferroelectric domain walls in single-crystal complex oxide thin films are found to be orders of magnitude slower when the interfacial bonds with the heteroepitaxial substrate are broken to create a freestanding film. This drastic change in domain wall kinetics does not originate from the alteration of epitaxial strain; rather, it is correlated with the structural ripples at mesoscopic length scale and associated flexoelectric effects induced in the freestanding films. In contrast, the effects of the bond-breaking on the local static ferroelectric properties of both top and bottom layers of the freestanding films, such as domain wall width and spontaneous polarization, are modest and governed by the change in epitaxy-induced compressive strain.
RESUMEN
BACKGROUND: Microalgae have been experimented as a potential feedstock for biofuel generation in current era owing to its' rich energy content, inflated growth rate, inexpensive culture approaches, the notable capacity of CO2 fixation, and O2 addition to the environment. Currently, research is ongoing towards the advancement of microalgal-biofuel technologies. The nano-additive application has been appeared as a prominent innovation to meet this phenomenon. MAIN TEXT: The main objective of this study was to delineate the synergistic impact of microalgal biofuel integrated with nano-additive applications. Numerous nano-additives such as nano-fibres, nano-particles, nano-tubes, nano-sheets, nano-droplets, and other nano-structures' applications have been reviewed in this study to facilitate microalgae growth to biofuel utilization. The present paper was intended to comprehensively review the nano-particles preparing techniques for microalgae cultivation and harvesting, biofuel extraction, and application of microalgae-biofuel nano-particles blends. Prospects of solid nano-additives and nano-fluid applications in the future on microalgae production, microalgae biomass conversion to biofuels as well as enhancement of biofuel combustion for revolutionary advancement in biofuel technology have been demonstrated elaborately by this review. This study also highlighted the potential biofuels from microalgae, numerous technologies, and conversion processes. Along with that, the study recounted suitability of potential microalgae candidates with an integrated design generating value-added co-products besides biofuel production. CONCLUSIONS: Nano-additive applications at different stages from microalgae culture to end-product utilization presented strong possibility in mercantile approach as well as positive impact on the environment along with valuable co-products generation into the near future.
RESUMEN
To evaluate the possibilities for biofuel and bioenergy production Acacia Holosericea, which is an invasive plant available in Brunei Darussalam, was investigated. Proximate analysis of Acacia Holosericea shows that the moisture content, volatile matters, fixed carbon, and ash contents were 9.56%, 65.12%, 21.21%, and 3.91%, respectively. Ultimate analysis shows carbon, hydrogen, and nitrogen as 44.03%, 5.67%, and 0.25%, respectively. The thermogravimetric analysis (TGA) results have shown that maximum weight loss occurred for this biomass at 357 °C for pyrolysis and 287 °C for combustion conditions. Low moisture content (<10%), high hydrogen content, and higher heating value (about 18.13 MJ/kg) makes this species a potential biomass. The production of bio-char, bio-oil, and biogas from Acacia Holosericea was found 34.45%, 32.56%, 33.09% for 500 °C with a heating rate 5 °C/min and 25.81%, 37.61%, 36.58% with a heating rate 10 °C/min, respectively, in this research. From Fourier transform infrared (FTIR) spectroscopy it was shown that a strong C-H, C-O, and C=C bond exists in the bio-char of the sample.
RESUMEN
Covalent functionalization (CF-GNPs) and non-covalent functionalization (NCF-GNPs) approaches were applied to prepare graphene nanoplatelets (GNPs). The impact of using four surfactants (SDS, CTAB, Tween-80, and Triton X-100) was studied with four test times (15, 30, 60, and 90 min) and four weight concentrations. The stable thermal conductivity and viscosity were measured as a function of temperature. Fourier transform infrared spectroscopy (FTIR), thermo-gravimetric analysis (TGA), X-ray diffraction (XRD) and Raman spectroscopy verified the fundamental efficient and stable CF. Several techniques, such as dispersion of particle size, FESEM, FETEM, EDX, zeta potential, and UV-vis spectrophotometry, were employed to characterize both the dispersion stability and morphology of functionalized materials. At ultrasonic test time, the highest stability of nanofluids was achieved at 60 min. As a result, the thermal conductivity displayed by CF-GNPs was higher than NCF-GNPs and distilled water. In conclusion, the improvement in thermal conductivity and stability displayed by CF-GNPs was higher than those of NCF-GNPs, while the lowest viscosity was 8% higher than distilled water, and the best thermal conductivity improvement was recorded at 29.2%.