RESUMEN
We present a novel implementation of conditional long short-term memory recurrent neural networks that successfully predict the spectral evolution of a pulse in nonlinear periodically-poled waveguides. The developed networks offer large flexibility by allowing the propagation of optical pulses with ranges of energies and temporal widths in waveguides with different poling periods. The results show very high agreement with the traditional numerical models. Moreover, we are able to use a single network to calculate both the real and imaginary parts of the pulse complex envelope, allowing for successfully retrieving the pulse temporal and spectral evolution using the same network.
RESUMEN
In this Letter, we show theoretically that the nonlinear photoionization process of a noble gas inside a hollow-core photonic-crystal fiber can be exploited in obtaining broadband supercontinuum generation via pumping close to the mid-infrared regime. The interplay between the Kerr and photoionization nonlinearities is strongly enhanced in this regime. Photoionization continuously modifies the medium dispersion, in which the refractive index starts to significantly decrease and approach the epsilon-near-zero regime. Subsequently, the self-phase modulation induced by the Kerr effect is boosted because of the accompanied slow-light effect. As a result of this interplay, an output spectrum that comprises a broadband light with multiple dispersive wave emission is obtained.
RESUMEN
A periodically tapered waveguides technique is an emerging potential route to establish quasi-phase-matching schemes in third-order nonlinear materials for efficient on-demand parametric interactions. In this paper, I investigate this method in enhancing spontaneous photon-pair emission in microstructured fibres and planar waveguides with sinusoidally varying cross sections. To study this process for continuous and pulsed-pump excitations, I have developed a general robust quantum model that takes into account self- and cross-phase modulations. The model shows a great enhancement in photon-pair generation in waveguides with a small number of tapering periods that are feasible via the current fabrication technologies. I envisage that this work will open a new area of research to investigate how the tapering patterns can be fully optimised to tailor the spectral properties of the output photons in nonlinear guided structures.
RESUMEN
We unveil the relation between the linear Anderson localisation process and nonlinear modulation instability. Anderson localised modes are formed in certain temporal intervals due to the random background noise. Such localised modes seed the formation of solitary waves that will appear during the modulation instability process at those preferred intervals. Afterwards, optical-event horizon effects between dispersive waves and solitons produce an artificial collective acceleration that favours the collision of solitons, which could eventually lead to a rogue-soliton generation.
RESUMEN
We introduce a novel design of anti-resonant fibers with negative-curvature square cores to be employed in 1.55 and 2.94 µm transmission bands. The fibers have low losses and single-mode operation via optimizing the negative curvature of the guiding walls. The first proposed fiber shows a broadband transmission window spanning 0.9-1.7 µm, with losses of 0.025 and 0.056 dB/m at 1.064 and 1.55 µm, respectively. The second proposed fiber has approximately a 0.023 dB/m guiding loss at 2.94 µm with a small cross-sectional area, useful for laser micromachining applications.
RESUMEN
Raman effect in gases can generate an extremely long-living wave of coherence that can lead to the establishment of an almost perfect temporal periodic variation of the medium refractive index. We show theoretically and numerically that the equations, regulate the pulse propagation in hollow-core photonic crystal fibers filled by Raman-active gas, are exactly identical to a classical problem in quantum condensed matter physics - but with the role of space and time reversed - namely an electron in a periodic potential subject to a constant electric field. We are therefore able to infer the existence of Wannier-Stark ladders, Bloch oscillations, and Zener tunneling, phenomena that are normally associated with condensed matter physics, using purely optical means.
RESUMEN
Based on the interplay between photoionization and Raman effects in gas-filled photonic crystal fibers, we propose a new optical device to control frequency conversion of ultrashort pulses. By tuning the input-pulse energy, the output spectrum can be either down-converted, up-converted, or even frequency-shift compensated. For low input energies, the Raman effect is dominant and leads to a redshift that increases linearly during propagation. For larger pulse energies, photoionization starts to take over the frequency-conversion process and induces a strong blueshift. The fiber-output pressure can be used as an additional degree of freedom to control the spectrum shift.
RESUMEN
We have developed an analytical model based on the perturbation theory to study the optical propagation of two successive solitons in hollow-core photonic crystal fibers filled with Raman-active gases. Based on the time delay between the two solitons, we have found that the trailing soliton dynamics can experience unusual nonlinear phenomena, such as spectral and temporal soliton oscillations and transport toward the leading soliton. The overall dynamics can lead to a spatiotemporal modulation of the refractive index with a uniform temporal period and a uniform or chirped spatial period.
RESUMEN
We study theoretically the propagation of relatively long pulses with ionizing intensities in a hollow-core photonic crystal fiber filled with a Raman-inactive noble gas. Because of photoionization, an extremely asymmetric self-phase modulation and a new kind of "universal" plasma-induced modulational instability appear in both normal and anomalous dispersion regions. We also show that it is possible to spontaneously generate a plasma-induced continuum of blueshifting solitons, opening up new possibilities for pushing supercontinuum generation towards shorter and shorter wavelengths.
RESUMEN
We show theoretically that the photoionization process in a hollow-core photonic crystal fiber filled with a Raman-inactive noble gas leads to a constant acceleration of solitons in the time domain with a continuous shift to higher frequencies, limited only by ionization loss. This phenomenon is opposite to the well-known Raman self-frequency redshift of solitons in solid-core glass fibers. We also predict the existence of unconventional long-range nonlocal soliton interactions leading to spectral and temporal soliton clustering. Furthermore, if the core is filled with a Raman-active molecular gas, spectral transformations between redshifted, blueshifted, and stabilized solitons can take place in the same fiber.
RESUMEN
Lithium niobate photonic circuits have the salutary property of permitting the generation, transmission, and processing of photons to be accommodated on a single chip. Compact photonic circuits such as these, with multiple components integrated on a single chip, are crucial for efficiently implementing quantum information processing schemes.We present a set of basic transformations that are useful for manipulating modal qubits in Ti:LiNbO(3) photonic quantum circuits. These include the mode analyzer, a device that separates the even and odd components of a state into two separate spatial paths; the mode rotator, which rotates the state by an angle in mode space; and modal Pauli spin operators that effect related operations. We also describe the design of a deterministic, two-qubit, single-photon, CNOT gate, a key element in certain sets of universal quantum logic gates. It is implemented as a Ti:LiNbO(3) photonic quantum circuit in which the polarization and mode number of a single photon serve as the control and target qubits, respectively. It is shown that the effects of dispersion in the CNOT circuit can be mitigated by augmenting it with an additional path. The performance of all of these components are confirmed by numerical simulations. The implementation of these transformations relies on selective and controllable power coupling among single- and two-mode waveguides, as well as the polarization sensitivity of the Pockels coefficients in LiNbO(3).
Asunto(s)
Niobio/química , Óxidos/química , Refractometría/instrumentación , Procesamiento de Señales Asistido por Computador/instrumentación , Titanio/química , Simulación por Computador , Diseño Asistido por Computadora , Diseño de Equipo , Análisis de Falla de Equipo , Modelos Teóricos , Teoría CuánticaRESUMEN
Coherence-domain imaging systems can be operated in a single-photon-counting mode, offering low detector noise; this in turn leads to increased sensitivity for weak light sources and weakly reflecting samples. We have demonstrated that excellent axial resolution can be obtained in a photon-counting coherence-domain imaging (CDI) system that uses light generated via spontaneous parametric downconversion (SPDC) in a chirped periodically poled stoichiometric lithium tantalate (chirped-PPSLT) structure, in conjunction with a niobium nitride superconducting single-photon detector (SSPD). The bandwidth of the light generated via SPDC, as well as the bandwidth over which the SSPD is sensitive, can extend over a wavelength region that stretches from 700 to 1500 nm. This ultrabroad wavelength band offers a near-ideal combination of deep penetration and ultrahigh axial resolution for the imaging of biological tissue. The generation of SPDC light of adjustable bandwidth in the vicinity of 1064 nm, via the use of chirped-PPSLT structures, had not been previously achieved. To demonstrate the usefulness of this technique, we construct images for a hierarchy of samples of increasing complexity: a mirror, a nitrocellulose membrane, and a biological sample comprising onion-skin cells.
Asunto(s)
Aumento de la Imagen/instrumentación , Fotometría/instrumentación , Procesamiento de Señales Asistido por Computador/instrumentación , Tomografía de Coherencia Óptica/instrumentación , Transductores , Conductividad Eléctrica , Diseño de Equipo , Análisis de Falla de Equipo , FotonesRESUMEN
We develop a generalized model for studying second-order parametric interactions in 1-D multilayered photonic structures, accounting for collinear oblique waves and partial pump depletion. This model is used to assess the performance of parametric devices in photonic-crystal microcavity (PCM) structures. Our model shows dramatic enhancement of nonlinear interactions at frequencies for which the waves are localized. Also, we demonstrate the exponential dependence of the conversion efficiency of second harmonic generation (SHG) on the number of layers as was recently pointed out. In addition, in optical parametric amplification (OPA), we find that the gain has a resonance-like dependence on the pump intensity, turning large peak gain into strong attenuation at greater intensities, which suggests that the device can operate as an optical switch.
Asunto(s)
Diseño Asistido por Computadora , Cristalización/métodos , Modelos Teóricos , Óptica y Fotónica/instrumentación , Simulación por Computador , Diseño de Equipo , Análisis de Falla de Equipo , Luz , Fotones , Dispersión de RadiaciónRESUMEN
The effects of three ways of binder delivery into the twin screw granulator (TSG) on the residence time, torque, properties of granules (size, shape, strength) and binder distribution were studied. The binder distribution was visualised through the transparent barrel using high speed imaging as well as quantified using offline technique. Furthermore, the effect of binder delivery and the change of screw configuration (conveying elements only and conveying elements with kneading elements) on the surface velocity of granules across the screw channel were investigated using particle image velocimetry (PIV). The binder was delivered in three ways; all solid binder incorporated with powder mixture, 50% of solid binder mixed with powder mixture and 50% mixed with water, all the solid binder dissolved in water. Incorporation of all solid binder with powder mixture resulted in the relatively longer residence time and higher torque, narrower granule size distribution, more spherical granules, weaker big-sized granules, stronger small-sized granules and better binder distribution compared to that in other two ways. The surface velocity of granules showed variation from one screw to another as a result of uneven liquid distribution as well as shown a reduction while introducing the kneading elements into the screw configuration.
Asunto(s)
Composición de Medicamentos/instrumentación , Composición de Medicamentos/métodos , Excipientes/química , Química Farmacéutica , Lactosa , Microscopía Electrónica de Rastreo , Tamaño de la Partícula , Polvos , Propiedades de Superficie , AguaRESUMEN
This work focuses on monitoring the behaviour and the mass of the built up/caking of powder during wet granulation using Twin Screw Granulator (TSG). The variables changed during this work are; powder (α-lactose monohydrate and microcrystalline cellulose (MCC)), the screw configuration (conveying and kneading elements) and the weight percentage of hydroxypropyl-methyl cellulose (HPMC) dissolved in the granulation liquid (i.e. changing liquid viscosity). Additionally, the effect of these variables on the size distribution, of the granules produced, was determined. The experiments were conducted using an acrylic transparent barrel. A stainless steel barrel was then used to conduct the two extreme granulation liquid viscosities with two different screw configurations, using lactose only. This was done to compare the findings to those obtained from the transparent barrel for validation purpose. These variables showed to affect the behaviour and the mass of the powder caking as well as the size distribution of granules. Overall, the use of kneading element resulted in uniform behaviour in caking with higher mass. Furthermore, increasing the amount of HPMC resulted in a reduction of the mass of powder caking for lactose, while showing inconsistent trend for MCC. Furthermore, lactose showed to have a greater tendency to cake in comparison to MCC. The results, for lactose, obtained from the stainless steel barrel compared well with their corresponding conditions from the transparent barrel, as the screw configuration and HPMC mass varied.