Modulating Aryl Azide Photolysis: Synthesis of a Room-Temperature Phosphorescent Carboline in Cucurbit[7]uril Host.

Cucurbit[7]uril (CB7), a supramolecular host, is employed to control the pathway of photolysis of an aryl azide in an aqueous medium. Normally, photolysis of aryl azides in bulk water culminates predominantly in the formation of azepine derivatives via intramolecular rearrangement. Remarkably, however, when this process unfolds within the protective confinement of the CB7 cavity, it results in a carboline derivative, as a consequence of a C─H amination reaction. The resulting carboline caged by CB7 reveals long-lived room temperature phosphorescence (RTP) in the solid state, with lifetimes extending up to 2.1 s. These findings underscore the potential of supramolecular hosts to modulate the photolysis of aryl azides and to facilitate novel phosphorescent materials.

A Versatile Microfluidic Platform for Extravasation Studies Based on DNA Origami-Cell Interactions.

The adhesion of circulating tumor cells (CTCs) to the endothelial lumen and their extravasation to surrounding tissues are crucial in the seeding of metastases and remain the most complex events of the metastatic cascade to study. Integrins expressed on CTCs are major regulators of the extravasation process. This knowledge is primarily derived from animal models and biomimetic systems based on artificial endothelial layers, but these methods have ethical or technical limitations. We present a versatile microfluidic device to study cancer cell extravasation that mimics the endothelial barrier by using a porous membrane functionalized with DNA origami nanostructures (DONs) that display nanoscale patterns of adhesion peptides to circulating cancer cells. The device simulates physiological flow conditions and allows direct visualization of cell transmigration through microchannel pores using 3D confocal imaging. Using this system, we studied integrin-specific adhesion in the absence of other adhesive events. Specifically, we show that the transmigration ability of the metastatic cancer cell line MDA-MB-231 is influenced by the type, distance, and density of adhesion peptides present on the DONs. Furthermore, studies with mixed ligand systems indicate that integrins binding to RGD (arginine-glycine-aspartic acid) and IDS (isoleucine-aspartic acid-serine) did not synergistically enhance the extravasation process of MDA-MB-231 cells.

The Staudinger Ligation.

While the Staudinger reaction has first been described a hundred years ago in 1919, the ligation reaction became one of the most important and efficient bioconjugation techniques in the 1990s and this century. It holds the crucial characteristics for bioorthogonal chemistry: biocompatibility, selectivity, and a rapid and high-yielding turnover for a wide variety of applications. In the past years, it has been used especially in chemical biology for peptide/protein synthesis, posttranslational modifications, and DNA labeling. Furthermore, it can be used for cell-surface engineering, development of microarrays, and drug delivery systems. However, it is also possible to use the reaction in synthetic chemistry for general formation of amide bonds. In this review, the three major types, traceless and nontraceless Staudinger Ligation as well as the Staudinger phosphite reaction, are described in detail. We will further illustrate each reaction mechanism and describe characteristic substrates, intermediates, and products. In addition, not only its advantages but also stereochemical aspects, scope, and limitations, in particular side reactions, are discussed. Finally, the method is compared to other bioorthogonal labeling methods.

Evaluation of a Novel Thiol-Norbornene-Functionalized Gelatin Hydrogel for Bioprinting of Mesenchymal Stem Cells.

Introduction: Three-dimensional bioprinting can be considered as an advancement of the classical tissue engineering concept. For bioprinting, cells have to be dispersed in hydrogels. Recently, a novel semi-synthetic thiolene hydrogel system based on norbornene-functionalized gelatin (GelNB) and thiolated gelatin (GelS) was described that resulted in the photoclick hydrogel GelNB/GelS. In this study, we evaluated the printability and biocompatibility of this hydrogel system towards adipose-tissue-derived mesenchymal stem cells (ASCs). Methods: GelNB/GelS was synthesized with three different crosslinking densities (low, medium and high), resulting in different mechanical properties with moduli of elasticity between 206 Pa and 1383 Pa. These hydrogels were tested for their biocompatibility towards ASCs in terms of their viability, proliferation and differentiation. The extrusion-based bioprinting of ASCs in GelNB/GelS-high was performed to manufacture three-dimensional cubic constructs. Results: All three hydrogels supported the viability, proliferation and chondrogenic differentiation of ASCs to a similar extent. The adipogenic differentiation of ASCs was better supported by the softer hydrogel (GelNB/GelS-low), whereas the osteogenic differentiation was more pronounced in the harder hydrogel (GelNB/GelS-high), indicating that the differentiation fate of ASCs can be influenced via the adaption of the mechanical properties of the GelNB/GelS system. After the ex vivo chondrogenic differentiation and subcutaneous implantation of the bioprinted construct into immunocompromised mice, the production of negatively charged sulfated proteoglycans could be observed with only minimal inflammatory signs in the implanted material. Conclusions: Our results indicate that the GelNB/GelS hydrogels are very well suited for the bioprinting of ASCs and may represent attractive hydrogels for subsequent in vivo tissue engineering applications.

Total synthesis of decarboxyaltenusin.

The total synthesis of decarboxyaltenusin (5'-methoxy-6-methyl-[1,1'-biphenyl]-3,3',4-triol), a toxin produced by various mold fungi, has been achieved in seven steps in a yield of 31% starting from 4-methylcatechol and 1-bromo-3,5-dimethoxybenzene, where the longest linear sequence consists of five steps. The key reaction was a palladium-catalyzed Suzuki coupling of an aromatic boronate with a brominated resorcin derivative.

Click Chemistry-mediated Biotinylation Reveals a Function for the Protease BACE1 in Modulating the Neuronal Surface Glycoproteome.

The cell surface proteome is dynamic and has fundamental roles in cell signaling. Many surface membrane proteins are proteolytically released into a cell's secretome, where they can have additional functions in cell-cell-communication. Yet, it remains challenging to determine the surface proteome and to compare it to the cell secretome, under serum-containing cell culture conditions. Here, we set up and evaluated the 'surface-spanning protein enrichment with click sugars' (SUSPECS) method for cell surface membrane glycoprotein biotinylation, enrichment and label-free quantitative mass spectrometry. SUSPECS is based on click chemistry-mediated labeling of glycoproteins, is compatible with labeling of living cells and can be combined with secretome analyses in the same experiment. Immunofluorescence-based confocal microscopy demonstrated that SUSPECS selectively labeled cell surface proteins. Nearly 700 transmembrane glycoproteins were consistently identified at the surface of primary neurons. To demonstrate the utility of SUSPECS, we applied it to the protease BACE1, which is a key drug target in Alzheimer's disease. Pharmacological BACE1-inhibition selectively remodeled the neuronal surface glycoproteome, resulting in up to 7-fold increased abundance of the BACE1 substrates APP, APLP1, SEZ6, SEZ6L, CNTN2, and CHL1, whereas other substrates were not or only mildly affected. Interestingly, protein changes at the cell surface only partly correlated with changes in the secretome. Several altered proteins were validated by immunoblots in neurons and mouse brains. Apparent nonsubstrates, such as TSPAN6, were also increased, indicating that BACE1-inhibition may lead to unexpected secondary effects. In summary, SUSPECS is broadly useful for determination of the surface glycoproteome and its correlation with the secretome.

New Polyfluorinated Cyanine Dyes for Selective NIR Staining of Mitochondria.

In this communication, the synthesis of three unknown polyfluorinated cyanine dyes and their application as selective markers for mitochondria are presented. By incorporating fluorous side chains into cyanine dyes, their remarkable photophysical properties were enhanced. To investigate their biological application, several different cell lines were incubated with the synthesized cyanine dyes. It was discovered that the presented dyes can be utilized for selective near-infrared-light (NIR) staining of mitochondria, with very low cytotoxicity determined by MTT assay. This is the first time that polyfluorinated cyanine fluorophores are presented as selective markers for mitochondria. Due to the versatile applications of polyfluorinated fluorophores in bioimaging and materials science, it is expected that the presented fluorophores will be stimulating for the scientific community.

Synthesis, Characterization, and Biological Properties of Steroidal Ruthenium(II) and Iridium(III) Complexes Based on the Androst-16-en-3-ol Framework.

A range of novel cyclometalated ruthenium(II) and iridium(III) complexes with a steroidal backbone based on androsterone were synthesized and characterized by NMR spectroscopy and X-ray crystallography. Their cytotoxic properties in RT112 and RT112 cP (cisplatin-resistant) cell lines as well as in MCF7 and somatic fibroblasts were compared with those of the corresponding nonsteroidal complexes and the noncyclometalated pyridyl complexes as well as with cisplatin as reference. All steroidal complexes were more active in RT112 cP cells than cisplatin, whereby the cyclometalated pyridinylphenyl complexes based on 5c showed high cytotoxicity while maintaining low resistant factors of 0.33 and 0.50.

Combinatorial Synthesis of Peptoid Arrays via Laser-Based Stacking of Multiple Polymer Nanolayers.

Here, the combinatorial synthesis of molecule arrays via a laser-assisted process is reported. Laser-transferred polymer nanolayers with embedded monomers, activators, or bases can be reliably stacked on top of each other, spot-by-spot, to synthesize molecule arrays. These various chemicals in the nanometer-thin layers are mixed by heat or solvent vapor, inducing coupling reactions. As an example, peptoid arrays with a density of 10 000 spots per cm2 with the sub-monomer or monomer method are generated. Moreover, successful reactions spot-by-spot are verified by laser-transferring MALDI-matrix (Matrix-assisted laser desorption/ionization) followed by MALDI mass spectrometry imaging.

Fluorescent Sulfonate-Based Inorganic-Organic Hybrid Nanoparticles for Staining and Imaging.

Sulfonate-based inorganic-organic hybrid nanoparticles (IOH-NPs) with the general saline composition [Gd(OH)]2+n/2[ Rdye(SO3) n] n- showing optical absorption and emission in the blue to red spectral regime are presented for the first time. All IOH-NPs are prepared via straightforward aqueous synthesis and instantaneously result in colloidally highly stable suspensions with mean particle diameters of 40-50 nm and high zeta potentials (-20 to -40 mV at pH 7.0). Specifically, the IOH-NPs comprise [Gd(OH)]2+2[CSB]4-, [Gd(OH)]2+2[DB71]4-, [Gd(OH)]2+[NFR]2-, [Gd(OH)]2+[AR97]2-, and [Gd(OH)]2+2[EB]4- showing blue, orange, red, and infrared absorption and emission ([CSB]: Chicago Sky Blue; [DB71]: Direct Blue 71; [NFR]: Nuclear Fast Red; [AR97]: Acid Red 97; [EB]: Evans Blue). The novel IOH-NPs are characterized by electron microscopy, dynamic light scattering, infrared spectroscopy, energy-dispersive X-ray analysis, thermogravimetry, elemental analysis, and fluorescence spectroscopy. In vitro studies based on HeLa and HUVEC cells were exemplarily performed with [Gd(OH)]2+2[EB]4- IOH-NPs and show intense fluorescence and only moderate toxicity at concentrations of 1 to 10 µg/mL. Based on aqueous synthesis, good colloidal stability, absence of severely toxic metals (e.g., Cd2+, Pb2+), use of molecular dyes that are already known for staining in cell biology and histology, extremely high dye load per nanoparticle (70-80 wt %), and blue to red absorption and fluorescence, the sulfonate-based IOH-NPs can be highly interesting for staining, fluorescence microscopy, and optical imaging.

"siRNA traffic lights": arabino-configured 2'-anchors for fluorescent dyes are key for dual color readout in cell imaging.

Two fluorescent dyes covalently attached in diagonal interstrand orientation to siRNA undergo energy transfer and thereby enable a dual color fluorescence readout (red/green) for hybridization. Three different structural variations were carried out and compared by their optical properties, including (i) the base surrogate approach with an acyclic linker as a substitute of the 2-deoxyriboside between the phosphodiester bridges, (ii) the 2'-modification of conventional ribofuranosides and (iii) the arabino-configured 2'-modification. The double stranded siRNA with the latter type of modification delivered the best energy transfer efficiency, which was explained by molecular dynamics simulations that showed that the two dyes are more flexible at the arabino-configured sugars compared to the completely stacked situation at the ribo-configured ones. Single molecule fluorescence lifetime measurements indicate their application in fluorescence cell imaging, which reveals a red/green fluorescence contrast in particular for the arabino-configured 2'-modification by the two dyes, which is key for tracking of siRNA transport into HeLa cells.

Chemical Synthesis of Glycosaminoglycans.

Glycosaminoglycans (GAGs) as one major part of the glycocalyx are involved in many essential biological cell processes, as well as in many courses of diseases. Because of the potential therapeutic application of GAG polymers, fragments, and also derivatives toward different diseases (e.g., heparin derivatives against Alzheimer's disease), there is a continual growing demand for new chemical syntheses, which suffice the high claim to stereoselectivity and chemoselectivity. This Review summarizes the progress of chemical syntheses of GAGs over the last 10 years. For each class of the glycosaminoglycans-hyaluronan (HA), heparan sulfate/heparin (HS/HP), chondroitin/dermatan sulfate (CS/DS), and keratan sulfate (KS)-mainly novel glycosylation strategies, elongation sequences, and protecting group patterns are discussed, but also (semi)automated syntheses, enzymatic approaches, and functionalizations of synthesized or isolated GAGs are considered.

An optimised version of the secretome protein enrichment with click sugars (SPECS) method leads to enhanced coverage of the secretome.

The secretome, the entirety of all soluble proteins either being secreted or proteolytically released by a cell, plays a key role in inter-cellular communication of multi-cellular organisms. Pathological alterations contribute to diseases such as hypertension, cancer, autoimmune disorders or neurodegenerative diseases. Hence, studying disease-related perturbations of the secretome and the secretome itself covers an important aspect of cellular physiology. We recently developed the secretome protein enrichment with click sugars (SPECS) method that enables the analysis of secretomes of in vitro cell cultures even in the presence of FCS with MS. So far, SPECS facilitated the identification of protease substrates of BACE1, SPPL3 and ADAM10. Though, the SPECS method has already enabled deep insights into secretome biology, we aimed to improve the SPECS protocol to obtain even more information from MS-based secretome analysis and reduce the amount of input material. Here, we optimised the reaction buffer, the pH and replaced Dibenzocyclooctyne (DBCO) PEG12-biotin with the more water-soluble variant DBCO-sulpho-biotin to finally provide an optimised protocol of the recently published SPECS protocol. Overall, the number of quantified glycoproteins and their average sequence coverage was increased by 1.6- and 2.4-fold, respectively. Thus, the opzimised SPECS protocol allows reducing the input material by half without losing information. These improvements make the SPECS method more sensitive and more universal applicable to cell types with limited availability.

Lanthanide Fluorobenzoates as Bio-Probes: a Quest for the Optimal Ligand Fluorination Degree.

The thorough study of fluorinated benzoates of lanthanides (Eu, Tb, Nd, Er, Yb, Gd, La, Lu) is reported. Their composition in single crystal and powder state revealed two predominant structural motifs. An in-depth luminescence study has been performed on the reported fluorobenzoates, showing, that terbium and europium complexes in solid state possess high luminescence intensity with the quantum yield of up to 69 %. High solubility in most organic solvents, as well as in water, combined with the high luminescence intensity in water solution and non-toxicity allowed the testing of europium complexes as bioprobes in cellulo. Among all tested fluorobenzoates, europium 2-fluorobenzoate dihydrate combined the best luminescent properties, thermodynamic stability, aqueous solubility, and non-toxicity, and was shown to be a viable bio-marker.

Double-Strand DNA Breaks Induced by Paracyclophane Gold(I) Complexes.

Gold(I) complexes of ClickPhos [2.2]paracyclophane ligands were synthesized in excellent yields and fully characterized by spectroscopic methods as well as X-ray crystallography. The complexes exhibit a rigid ligand backbone and a triazolyl moiety and were systematically studied with respect to their cytotoxic properties. In combination with the ionic complex [(GemPhos)Au(tht)][ClO4 ] (tht=tetrahydrothiophene), in which the gold(I) atom exhibits a distorted trigonal coordination sphere of two phosphines and a labile tht ligand, their efficiency in cytotoxicity was investigated in HeLa, MCF7, and HCT116 cells as well as in a zebrafish model. Their cytotoxicity and their mechanisms of action are different and involve apoptosis, necrosis, and DNA damage. The compounds presented herein are potent metal-based cytostatics displaying LD50 values from 3.5-38 µm in different tumor cell lines and induce double-strand DNA breaks (DSB) as shown by H2AX phosphorylation (γH2AX) at foci of DSBs.

Secretome analysis identifies novel signal Peptide peptidase-like 3 (Sppl3) substrates and reveals a role of Sppl3 in multiple Golgi glycosylation pathways.

Signal peptide peptidase-like 3 (Sppl3) is a Golgi-resident intramembrane-cleaving protease that is highly conserved among multicellular eukaryotes pointing to pivotal physiological functions in the Golgi network which are only beginning to emerge. Recently, Sppl3 was shown to control protein N-glycosylation, when the key branching enzyme N-acetylglucosaminyltransferase V (GnT-V) and other medial/trans Golgi glycosyltransferases were identified as first physiological Sppl3 substrates. Sppl3-mediated endoproteolysis releases the catalytic ectodomains of these enzymes from their type II membrane anchors. Protein glycosylation is a multistep process involving numerous type II membrane-bound enzymes, but it remains unclear whether only few of them are Sppl3 substrates or whether Sppl3 cleaves many of them and thereby controls protein glycosylation at multiple levels. Therefore, to systematically identify Sppl3 substrates we used Sppl3-deficient and Sppl3-overexpression cell culture models and analyzed them for changes in secreted membrane protein ectodomains using the proteomics "secretome protein enrichment with click sugars (SPECS)" method. SPECS analysis identified numerous additional new Sppl3 candidate glycoprotein substrates, several of which were biochemically validated as Sppl3 substrates. All novel Sppl3 substrates adopt a type II topology. The majority localizes to the Golgi network and is implicated in Golgi functions. Importantly, most of the novel Sppl3 substrates catalyze the modification of N-linked glycans. Others contribute to O-glycan and in particular glycosaminoglycan biosynthesis, suggesting that Sppl3 function is not restricted to N-glycosylation, but also functions in other forms of protein glycosylation. Hence, Sppl3 emerges as a crucial player of Golgi function and the newly identified Sppl3 substrates will be instrumental to investigate the molecular mechanisms underlying the physiological function of Sppl3 in the Golgi network and in vivo. Data are available via ProteomeXchange with identifier PXD001672.

A postsynthetically 2'-"clickable" uridine with arabino configuration and its application for fluorescent labeling and imaging of DNA.

The arabino-configured analog of uridine with a propargyl group at the 2'-position was synthesized and incorporated into DNA by solid-phase chemistry. The fluorescence quantum yields of DNA strands that were postsynthetically modified by blue and green emitting cyanine-styryl dyes were improved due to the arabino-configured anchor. These oligonucleotides were used as energy transfer donors in hybrids with oligonucleotides modified with acceptor dyes that emit in the yellow-red range. These combinations give energy transfer pairs with blue-yellow, blue-red and green-red emission color changes. All combinations of arabino- and ribo-configured donor strands with arabino- and ribo-configured acceptor strands were evaluated. This array of doubly modified hybrids was screened by their emission color contrast and fluorescence quantum yield. Especially mixed combinations, that means donor dyes with arabino-configured anchor with acceptor dyes with ribo-configured anchor, and vice versa, showed significantly improved fluorescence properties. Those were successfully applied for fluorescent imaging of DNA after transport into living cells.

Secretome protein enrichment identifies physiological BACE1 protease substrates in neurons.

Cell surface proteolysis is essential for communication between cells and results in the shedding of membrane-protein ectodomains. However, physiological substrates of the contributing proteases are largely unknown. We developed the secretome protein enrichment with click sugars (SPECS) method, which allows proteome-wide identification of shedding substrates and secreted proteins from primary cells, even in the presence of serum proteins. SPECS combines metabolic glycan labelling and click chemistry-mediated biotinylation and distinguishes between cellular and serum proteins. SPECS identified 34, mostly novel substrates of the Alzheimer protease BACE1 in primary neurons, making BACE1 a major sheddase in the nervous system. Selected BACE1 substrates-seizure-protein 6, L1, CHL1 and contactin-2-were validated in brains of BACE1 inhibitor-treated and BACE1 knock-out mice. For some substrates, BACE1 was the major sheddase, whereas for other substrates additional proteases contributed to total substrate shedding. The new substrates point to a central function of BACE1 in neurite outgrowth and synapse formation. SPECS is also suitable for quantitative secretome analyses of primary cells and may be used for the discovery of biomarkers secreted from tumour or stem cells.

Polarity Sensitive Bioorthogonally Applicable Far-Red Emitting Labels for Postsynthetic Nucleic Acid Labeling by Copper-Catalyzed and Copper-Free Cycloaddition.

Two series of new, water-soluble, membrane-permeable, far-red/NIR emitting benzothiazolium-based fluorescent labels with large Stokes' shifts were synthesized that can be conjugated to alkyne-modified biomolecules through their azide moiety via azide-alkyne cycloaddition. We have used these azide bearing labels to make fluorescent DNA constructs using copper-catalyzed "click" reaction. All dyes showed good or remarkable fluorescence intensity enhancement upon conjugation to DNA. We also investigated the possibility to incorporate the benzocyclooctyne motif through rigid (ethnynyl) or flexible (ethyl) linkers into the DNA, thus enabling copper-free labeling schemes. We observed that there is a marked difference between the two linkers applied in terms of optical properties of the labeled oligonucleotides. We have also tested the in vivo labeling potential of these newly synthesized dyes on HeLa cells previously transfected with cyclooctynylated DNA. Confocal fluorescent images showed that the dyes are all able to cross the membrane and suitable for background-fluorescence free fluorescent tagging of nucleic acids. Moreover, we have observed different accumulation of the two dye series in the endosomal particles, or in the nuclei, respectively.

A Modular Class of Fluorescent Difluoroboranes: Synthesis, Structure, Optical Properties, Theoretical Calculations and Applications for Biological Imaging.

Ten borylated bipyridines (BOBIPYs) have been synthesized and selected structural modifications have been made that allow useful structure-optical property relationships to be gathered. These systems have been further investigated using DFT calculations and spectroscopic measurements, showing blue to green fluorescence with quantum yields up to 41 %. They allow full mapping of the structure to determine where selected functionalities can be implemented, to tune the optical properties or to incorporate linking groups. The best derivative was thus functionalised with an alkyne linker, which would enable further applications through click chemistry and in this optic, the stability of the fluorophores has been evaluated.