Relationship of Sanitizers, Disinfectants, and Cleaning Agents with Antimicrobial Resistance.

HIGHLIGHTS: Sanitizers and disinfectants (biocides) are essential for food safety assurance. Concerns have been raised about theoretical risk of biocide-induced antimicrobial resistance. In vitro studies provide weak causal evidence to attribute antimicrobial resistance to biocide usage. GMPs, proper biocide usage, and avoidance of biofilms mitigate risk of antimicrobial resistance.

Why semicarbazide (SEM) is not an appropriate marker for the usage of nitrofurazone on agricultural animals.

A comprehensive global database on semicarbazide (SEM) in foodstuffs and food ingredients is presented, with over 4000 data collected in foods such as seafood (crustaceans, fish powders), meat (beef, chicken powders), dairy products (e.g. raw milk, milk powders, whey, sweet buttermilk powder, caseinate, yoghurt, cheese), honey and other ingredients. The results provide evidence that the presence of SEM in certain dairy ingredients (whey, milk protein concentrates) is a by-product of chemical reactions taking place during the manufacturing process. Of the dairy ingredients tested (c. 2000 samples), 5.3% showed traces of SEM > 0.5 µg/kg. The highest incidence of SEM-positive samples in the dairy category were whey (powders, liquid) and milk protein concentrates (35% positive), with up to 13 µg/kg measured in a whey powder. Sweet buttermilk powder and caseinate followed, with 27% and 9.3% positives, respectively. SEM was not detected in raw milk, or in yoghurt or cheese. Of the crustacean products (shrimp and prawn powders) tested, 44% were positive for SEM, the highest value measured at 284 µg/kg. Fish powders revealed an unexpectedly high incidence of positive samples (25%); in this case, fraudulent addition of shellfish shells or carry-over during processing cannot be excluded. Overall, the data provide new insights into the occurrence of SEM (for dairy products and fish powders), substantially strengthening the arguments that SEM in certain food categories is not a conclusive marker of the use of the illegal antibiotic nitrofurazone.

Analysis of fumonisin B(1) in Fusarium proliferatum-infected asparagus spears and garlic bulbs from Germany by liquid chromatography-electrospray ionization mass spectrometry.

Fusarium proliferatum is one of a group of fungal species that produce fumonisins and is considered to be a pathogen of many economically important plants. The occurrence of fumonisin B(1) (FB(1)) in F. proliferatum-infected asparagus spears from Germany was investigated using a liquid chromatography-electrospray ionization mass spectrometry (LC-ESI-MS) method with isotopically labeled fumonisin FB(1)-d(6) as internal standard. FB(1) was detected in 9 of the 10 samples in amounts ranging from 36.4 to 4513.7 ng/g (based on dry weight). Furthermore, the capability of producing FB(1) by the fungus in garlic bulbs was investigated. Therefore, garlic was cultured in F. proliferatum-contaminated soil, and the bulbs were screened for infection with F. proliferatum and for the occurrence of fumonisins by LC-MS. F. proliferatum was detectable in the garlic tissue, and all samples contained FB(1) (26.0-94.6 ng/g). This is the first report of the natural occurrence of FB(1) in German asparagus spears, and these findings suggest a potential for natural contamination of garlic bulbs with fumonisins.

Bound fumonisin B1: analysis of fumonisin-B1 glyco and amino acid conjugates by liquid chromatography-electrospray ionization-tandem mass spectrometry.

To study the formation of fumonisin artifacts and the binding of fumonisins to matrix components (e.g., saccharides and proteins) in thermal-treated food, model experiments were performed. Fumonisin B(1) and hydrolyzed fumonisin B(1) were incubated with alpha-d-glucose and sucrose (mono- and disaccharide models), with methyl alpha-d-glucopyranoside (starch model), and with the amino acid derivatives N-alpha-acetyl-l-lysine methyl ester and BOC-l-cysteine methyl ester (protein models). The reaction products formed were analyzed by liquid chromatography-electrospray ionization-tandem mass spectrometry. The incubation of d-glucose with fumonisin B(1) or hydrolyzed fumonisin B(1) resulted in the formation of Amadori rearrangement products. Whereas conjugates were found following the reaction of sucrose, methyl alpha-d-glucopyranoside, and the amino acid derivatives with fumonisin B(1), the heating with hydrolyzed fumonisin B(1) yielded no artifacts. For structural determination, the stable reaction product formed by heating of methyl alpha-d-glucopyranoside (as starch model) with fumonisin B(1) was purified and identified by nuclear magnetic resonance spectroscopy as the diester of the fumonisin tricarballylic acid side chains with methyl alpha-d-glucopyranoside. These model experiments demonstrate that fumonisins are able to bind to polysaccharides and proteins via their two tricarballylic acid side chains.

Masked mycotoxins: a review.

The aim of this review is to give a comprehensive overview of the current knowledge on plant metabolites of mycotoxins, also called masked mycotoxins. Mycotoxins are secondary fungal metabolites, toxic to human and animals. Toxigenic fungi often grow on edible plants, thus contaminating food and feed. Plants, as living organisms, can alter the chemical structure of mycotoxins as part of their defence against xenobiotics. The extractable conjugated or non-extractable bound mycotoxins formed remain present in the plant tissue but are currently neither routinely screened for in food nor regulated by legislation, thus they may be considered masked. Fusarium mycotoxins (deoxynivalenol, zearalenone, fumonisins, nivalenol, fusarenon-X, T-2 toxin, HT-2 toxin, fusaric acid) are prone to metabolisation or binding by plants, but transformation of other mycotoxins by plants (ochratoxin A, patulin, destruxins) has also been described. Toxicological data are scarce, but several studies highlight the potential threat to consumer safety from these substances. In particular, the possible hydrolysis of masked mycotoxins back to their toxic parents during mammalian digestion raises concerns. Dedicated chapters of this article address plant metabolism as well as the occurrence of masked mycotoxins in food, analytical aspects for their determination, toxicology and their impact on stakeholders.

Comparison of indirect and direct quantification of esters of monochloropropanediol in vegetable oil.

The presence of fatty acid esters of monochloropropanediol (MEs) in food is a recent concern raised due to the carcinogenicity of their hydrolysable moieties 2- and 3-monochloropropanediol (2- and 3-MCPD). Several indirect methods for the quantification of MEs have been developed and are commonly in use until today, however significant discrepancies among analytical results obtained are challenging their reliability. The aim of the present study was therefore to test the trueness of an indirect method by comparing it to a newly developed direct method using palm oil and palm olein as examples. The indirect method was based on ester cleavage under acidic conditions, derivatization of the liberated 2- and 3-MCPD with heptafluorobutyryl imidazole and GC-MS determination. The direct method was comprised of two extraction procedures targeting 2-and 3-MCPD mono esters (co-extracting as well glycidyl esters) by the use of double solid phase extraction (SPE), and 2- and 3-MCPD di-esters by the use of silica gel column, respectively. Detection was carried out by liquid chromatography coupled to time of flight mass spectrometry (LC-ToF-MS). Accurate quantification of the intact compounds was assured by means of matrix matched standard addition on extracts. Analysis of 22 palm oil and 7 palm olein samples (2- plus 3-MCPD contamination ranged from 0.3 to 8.8 µg/g) by both methods revealed no significant bias. Both methods were therefore considered as comparable in terms of results; however the indirect method was shown to require less analytical standards, being less tedious and furthermore applicable to all type of different vegetable oils and hence recommended for routine application.

Glycidyl esters in refined palm (Elaeis guineensis) oil and related fractions. Part II: practical recommendations for effective mitigation.

In a previous work, it was shown that at high temperatures (up to 280°C) glycidyl esters (GE) are formed from diacylglycerols (DAG) via elimination of free fatty acid (FFA). In the present study, the impact of DAG content and temperature on the formation of GE using a model vacuum system mimicking industrial edible oil deodorization is investigated. These deodorization experiments confirmed that the formation of GE from DAG is extensive at temperatures above 230-240°C, and therefore, this value should be considered as an upper limit for refining operations. Furthermore, experimental data suggest that the formation of GE accelerates in particular when the DAG levels in refined oils exceed 3-4% of total lipids. Analysis of the lipid composition of crude palm oil (CPO) samples allowed the estimation that this critical DAG content corresponds to about 1.9-2.5% of FFA, which is the conventional quality marker of CPO. Moreover, high levels (>100ppm) of GE were also found in palm fatty acid distillate samples, which may indicate that the level of GE in fully refined palm oils also depends on the elimination rate of GE into the fatty acid distillate.

Determination of seven glycidyl esters in edible oils by gel permeation chromatography extraction and liquid chromatography coupled to mass spectrometry detection.

A method based on a gel permeation chromatography (GPC) extraction procedure combined with an additional cleanup by solid-phase extraction (SPE) on silica gel and liquid chromatography-mass spectrometry (LC-MS) detection has been validated for the analysis of seven glycidyl esters (GEs) including glycidyl laurate, myristate, palmitate, stearate, oleate, linoleate, and linolenate in various edible oils. This method was conjointly developed and validated by two different laboratories, using two different detection systems, a LC time of flight MS (LC-ToF-MS) and a LC triple-quadrupole MS (LC-MS/MS). The extraction procedure allowed targeting low contamination levels due to a highly efficient matrix removal from the 400 mg oil sample loaded on the GPC column and is suitable for routine analysis as 24 samples can be extracted in an automated and reproducible way every 12 h. GPC extraction combined with SPE cleanup and LC-MS/MS detection leads to a limit of quantification in oil samples between 50 and 100 µg/kg depending on the type of glycidyl ester. Recoveries ranged from 68 to 111% (average = 93%). Quantification was performed by automated standard addition on extracts to compensate matrix effects artifacts. To control recoveries of each sample four isotopically labeled GEs ((13)C(3) or (13)C(4)) were included in the method.

Development and comparison of two multiresidue methods for the analysis of 17 mycotoxins in cereals by liquid chromatography electrospray ionization tandem mass spectrometry.

Two multiresidue methods based on different extraction procedures have been developed and compared for the liquid chromatography electrospray ionization tandem mass spectrometry analysis of 17 mycotoxins including ochratoxin A, aflatoxins (B(1), B(2), G(1), and G(2)), zearalenone, fumonisins (B(1) and B(2)), T-2 toxin, HT-2 toxin, nivalenol, deoxynivalenol, 3- and 15-acetyldeoxynivalenol, fusarenon-X, diacetoxyscirpenol, and neosolaniol in cereal-based commodities. The extraction procedures considered were a QuEChERS-like method and one using accelerated solvent extraction (ASE). Both extraction procedures gave similar performances in terms of linearity (r(2) > 0.98) and precision (both RSD(r) and RSD(iR) < 20%). Trueness was evaluated through participation in four proficiency tests and by the analysis of two certified reference materials and one quality control material. Satisfactory Z scores (|Z| < 2) and trueness values (73-130%) were obtained by the proposed procedures. Limits of quantification were similar by both methods and were within the 1.0-2.0 microg/kg range for aflatoxins, 0.5 microg/kg for ochratoxin A, and the 5-100 microg/kg range for all other mycotoxins tested. The QuEChERS-like method was found to be easier to handle and allowed a higher sample throughput as compared to the ASE method.

Determination of T-2 and HT-2 toxins in cereals including oats after immunoaffinity cleanup by liquid chromatography and fluorescence detection.

A reliable method for the determination of T-2 toxin and HT-2 toxin in different cereals, including oats, as well as in cereal products was developed. After extraction with methanol/water (90/10, v/v) and dilution with a 4% NaCl solution, the toxins were purified with immunoaffinity columns, derivatized with 1-anthroylnitrile, separated by HPLC, and determined using fluorescence detection. Due to the unspecific derivatization reagents, validation parameters were matrix dependent: in the range 10-200 microg/kg, recovery rates of 74-120% with relative standard deviations between 0.5 and 20.3% were obtained. On average, the limit of quantitation was shown to be 8 microg/kg for each toxin. For naturally contaminated samples, comparable results were obtained when analysis was performed according to this method without derivatization as well as according to a method based on a SPE cleanup utilizing tandem mass spectrometric detection in both cases. Using aqueous acetonitrile as extractant resulted in incorrectly high toxin concentrations due to water absorption of dry samples and toxin accumulation in the organic phase in the subsequent phase separation of the extractant. Furthermore, when comparing the commercially available immunoaffinity columns for T-2 and HT-2 toxins, significant differences regarding capacity and cleanup performance were observed.