RESUMEN
Cdx Hg1- x Se/HgS/Cdy Zn1- y S core/multi-shell quantum dots (QDs) exhibiting bright tissue-penetrating shortwave infrared (SWIR; 1000-1700 nm) photoluminescence (PL) are engineered. The new structure consists of a quasi-type-II Cdx Hg1- x Se/HgS core/inner shell domain creating luminescent bandgap tunable across SWIR window and a wide-bandgap Cdy Zn1- y S outer shell boosting the PL quantum yield (QY). This compositional sequence also facilitates uniform and coherent shell growth by minimizing interfacial lattice mismatches, resulting in high QYs in both organic (40-80%) and aqueous (20-70%) solvents with maximum QYs of 87 and 73%, respectively, which are comparable to those of brightest visible-to-near infrared QDs. Moreover, they maintain bright PL in a photocurable resin (QY 40%, peak wavelength ≈ 1300 nm), enabling the fabrication of SWIR-luminescent composites of diverse morphology and concentration. These composites are used to localize controlled amounts of SWIR QDs inside artificial (Intralipid) and porcine tissues and quantitatively evaluate the applicability as luminescent probes for deep-tissue imaging.
RESUMEN
Small molecules possessing multiple proton-accessible sites are important not only to many biological systems but also to host-guest chemistry; their protonation states are causal to boosting or hindering specific host-guest interactions. However, determining the protonation site is not trivial. Herein, we conduct electrospray ionization ion mobility spectrometry-mass spectrometry to imipramine, a known molecule with two protonation sites, based on the introduction of cucurbit[7]uril as a host molecule. For protonated imipramine, the proposed strategy allows clear distinction of the two protomers as host-guest complex ions and can be leveraged to capture the energetically less preferable protomer of the protonated imipramine.
RESUMEN
A technique combining ion mobility spectrometry-mass spectrometry (IMS-MS) and supercharging electrospray ionization (ESI) has been demonstrated to differentiate protein chemical topology effectively. Incorporating as many charges as possible into proteins via supercharging ESI allows the protein chains to be largely unfolded and stretched, revealing their hidden chemical topology. Different chemical topologies result in differing geometrical sizes of the unfolded proteins due to constraints in torsional rotations in cyclic domains. By introducing new topological indices, such as the chain-length-normalized collision cross-section (CCS) and the maximum charge state (zM ) in the extensively unfolded state, we were able to successfully differentiate various protein chemical topologies, including linear chains, ring-containing topologies (lasso, tadpole, multicyclics, etc.), and mechanically interlocked rings, like catenanes.
Asunto(s)
Espectrometría de Movilidad Iónica , Espectrometría de Masa por Ionización de Electrospray , Espectrometría de Masa por Ionización de Electrospray/métodos , Espectrometría de Movilidad Iónica/métodos , Proteínas/químicaRESUMEN
C(aryl)-OMe bond functionalization catalyzed by cobalt(II) chloride in combination with a nacnac-type ligand and magnesium as a reductant is reported. Borylation and benzoylation of aryl methoxides are demonstrated, and C(aryl)-SMe bond borylation can be achieved under similar conditions. This is the first example of achieving these transformations using cobalt catalysis. Mechanistic studies suggest that a Grignard reagent is generated as an intermediate in a rare example of a magnesiation via a C-O bond activation reaction. Indeed, an organomagnesium species could be directly observed by electrospray ionization mass spectroscopic analysis. Kinetic experiments indicate that a heterogeneous cobalt catalyst performs the C-O bond activation.
RESUMEN
Ni(COD)2-catalyzed cycloaddition reactions to access pyridines have been extensively studied. However, this catalyst typically requires drying procedures and inert-atmosphere techniques for the reactions. Herein, we report operationally simple nickel(0) catalysis to access substituted pyridines from various nitriles and 1,6-diynes without the aid of air-free techniques. The Ni-Xantphos-based catalytic manifold is tolerant to air, moisture, and heat while promoting the [2 + 2 + 2] cycloaddition reactions with high reaction yields and broad substrate scope. In addition, we disclose that not only the steric effect but also the frontier molecular orbital interactions can play a critical role in determining the regiochemical outcome of nickel-catalyzed [2 + 2 + 2] cycloaddition for the synthesis of substituted pyridines.
RESUMEN
Korean river design standards set general design standards for rivers and river-related projects in Korea, which systematize the technologies and methods involved in river-related projects. This includes measurement methods for parts necessary for river design, but does not include information on shear stress. Shear stress is one of the factors necessary for river design and operation. Shear stress is one of the most important hydraulic factors used in the fields of water, especially for artificial channel design. Shear stress is calculated from the frictional force caused by viscosity and fluctuating fluid velocity. Current methods are based on past calculations, but factors such as boundary shear stress or energy gradient are difficult to actually measure or estimate. The point velocity throughout the entire cross-section is needed to calculate the velocity gradient. In other words, the current Korean river design standards use tractive force and critical tractive force instead of shear stress because it is more difficult to calculate the shear stress in the current method. However, it is difficult to calculate the exact value due to the limitations of the formula to obtain the river factor called the tractive force. In addition, tractive force has limitations that use an empirically identified base value for use in practice. This paper focuses on the modeling of shear-stress distribution in open channel turbulent flow using entropy theory. In addition, this study suggests a shear stress distribution formula, which can easily be used in practice after calculating the river-specific factor T. The tractive force and critical tractive force in the Korean river design standards should be modified by the shear stress obtained by the proposed shear stress distribution method. The present study therefore focuses on the modeling of shear stress distribution in an open channel turbulent flow using entropy theory. The shear stress distribution model is tested using a wide range of forty-two experimental runs collected from the literature. Then, an error analysis is performed to further evaluate the accuracy of the proposed model. The results reveal a correlation coefficient of approximately 0.95-0.99, indicating that the proposed method can estimate shear-stress distribution accurately. Based on this, the results of the distribution of shear stress after calculating the river-specific factors show a correlation coefficient of about 0.86 to 0.98, which suggests that the equation can be applied in practice.
RESUMEN
Entangled proteins have attracted significant research interest. Herein, we report the first rationally designed lasso proteins, or protein [1]rotaxanes, by using a p53dim-entwined dimer for intramolecular entanglement and a SpyTag-SpyCatcher reaction for side-chain ring closure. The lasso structures were confirmed by proteolytic digestion, mutation, NMR spectrometry, and controlled ligation. Their dynamic properties were probed by experiments such as end-capping, proteolytic digestion, and heating/cooling. As a versatile topological intermediate, a lasso protein could be converted to a rotaxane, a heterocatenane, and a "slide-ring" network. Being entirely genetically encoded, this robust and modular lasso-protein motif is a valuable addition to the topological protein repertoire and a promising candidate for protein-based biomaterials.
Asunto(s)
Biosíntesis de Proteínas , Proteínas/química , Cromatografía Liquida , Dimerización , Resonancia Magnética Nuclear Biomolecular , Conformación Proteica , Espectrometría de Masa por Ionización de ElectrosprayRESUMEN
Hierarchical self-assembly of building blocks over multiple length scales is ubiquitous in living organisms. Microtubules are one of the principal cellular components formed by hierarchical self-assembly of nanometer-sized tubulin heterodimers into protofilaments, which then associate to form micron-length-scale, multi-stranded tubes. This peculiar biological process is now mimicked with a fully synthetic molecule, which forms a 1:1 host-guest complex with cucurbit[7]uril as a globular building block, and then polymerizes into linear poly-pseudorotaxanes that associate laterally with each other in a self-shape-complementary manner to form a tubular structure with a length over tens of micrometers. Molecular dynamic simulations suggest that the tubular assembly consists of eight poly-pseudorotaxanes that wind together to form a 4.5â nm wide multi-stranded tubule.
Asunto(s)
Microtúbulos/química , Polímeros/química , Hidrocarburos Aromáticos con Puentes/química , Imidazoles/química , Microscopía de Fuerza Atómica , Microscopía Electrónica de Transmisión , Microtúbulos/metabolismo , Simulación de Dinámica Molecular , Rotaxanos/químicaRESUMEN
Herein we report a facile transformation of hydroxylated cucurbit[n]uril (CB[n], n = 6 and 7) to other functionality-conjugated CB[n]s by nucleophilic substitution of the hydroxyl group with a wide range of nitriles and alcohols. The reaction proceeds efficiently via generation of a superelectrophilic carbocation on the CB framework from hydroxylated CB[n]s under superacidic conditions. One of the resulting CB[n] derivatives with reactive functionality, monocarboxylated CB[7], is efficiently conjugated to an enzyme (horseradish peroxidase, HRP) by amide coupling. This provides a CB[7]-conjugated functional biomaterial (CB[7]-HRP) that selectively detects proteins labeled with a guest, adamantylammonium (AdA), based on bioorthogonal high-affinity host-guest interactions between CB[7] and AdA. We demonstrated the potential of overcoming the limitations in preparing reactive functional CB[n] derivatives, enabling the exploration of novel bioapplications of CB[n]-based host-guest chemistry with new CB[n]-conjugated functional materials.
RESUMEN
More than 100 hydrophobicity scales have been introduced, with each being based on a distinct condensed-phase approach. However, a comparison of the hydrophobicity values gained from different techniques, and their relative ranking, is not straightforward, as the interactions between the environment and the amino acid are unique to each method. Here, we overcome this limitation by studying the properties of amino acids in the clean-room environment of the gas phase. In the gas phase, entropic contributions from the hydrophobic effect are by default absent and only the polarity of the side chain dictates the self-assembly. This allows for the derivation of a novel hydrophobicity scale, which is based solely on the interaction between individual amino acid units within the cluster and thus more accurately reflects the intrinsic nature of a side chain. This principle can be further applied to classify non-natural derivatives, as shown here for fluorinated amino acid variants.
RESUMEN
The amino acid serine has long been known to form a protonated "magic-number" cluster containing eight monomer units that shows an unusually high abundance in mass spectra and has a remarkable homochiral preference. Despite many experimental and theoretical studies, there is no consensus on a Ser8H+ structure that is in agreement with all experimental observations. Here, we present the structure of Ser8H+ determined by a combination of infrared spectroscopy and ab initio molecular dynamics simulations. The three-dimensional structure that we determine is â¼25 kcal mol-1 more stable than the previous most stable published structure and explains both the homochiral preference and the experimentally observed facile replacement of two serine units.
RESUMEN
Triacylglycerol (TAG) lipases hydrolyze ester bonds in TAG and release diacylglycerol (DAG), monoacylglycerol (MAG), and FA. We present a one-step chemical derivatization method for label-free quantification of a mixture of TAG, DAG, and MAG following lipase assay by ESI-MS. Because the ionization efficiencies of TAG, DAG, and MAG are not identical, lipase reaction products, DAG and MAG, are derivatized to TAG species by esterifying their hydroxyl groups using acyl chloride, whose acyl chain contains one less (or one more) -CH2 group than that of substrate TAG. This resulted in three TAG species that were separated by 14 Da from one another and exhibited similar ion responses representing their molar amounts in the mass spectra. A good linear correlation was observed between peak intensity ratios and molar ratios in calibration curve. This method enables simultaneous quantification of TAG, DAG, and MAG in lipase assay and, in turn, allows stoichiometric determination of the concentrations of FAs released from TAG and DAG separately. By applying this strategy to measure both TAG and DAG lipolytic activities of the yeast Tgl2 lipase, we demonstrated its usefulness in studying enzymatic catalysis, as lipase enzymes often show dissimilar activities toward these lipids.
Asunto(s)
Hidrólisis , Lipasa/aislamiento & purificación , Lípidos/química , Saccharomyces cerevisiae/enzimología , Catálisis , Diglicéridos/química , Diglicéridos/metabolismo , Esterificación , Lipasa/química , Monoglicéridos/química , Monoglicéridos/metabolismo , Triglicéridos/química , Triglicéridos/metabolismoRESUMEN
Amphiphilic porphyrins are of great interest in the field of supramolecular chemistry because they can be fabricated into highly ordered architectures that are stabilized by π-π stacking of porphine rings as well as by non-covalent interactions between their hydrophilic substituents. Protoporphyrin IX (PPIX) has two flexible propionic acid tails and is one of the most common amphiphilic porphyrins. However, unlike other PPIX analogues, PPIX does not form stable extended nanostructures, and the reason for this is still not understood. Here, we employ ion mobility mass spectrometry in combination with infrared multiple photon dissociation spectroscopy to investigate early aggregates of PPIX. The ion mobility results show that growth occurs via single-stranded face-to-face stacking of PPIX. From the infrared spectroscopy on well-defined aggregates, it can be concluded that pairing of the carboxylic acid groups of the tails is a stabilizing element and that such a pairing occurs across a third residue from residue n to residue n+2. The tetramer appears to be especially stable, because all of its propionic acid tails are optimally paired and no free tails to promote further growth are present, which possibly prevents PPIX from forming larger, well-ordered assemblies.
Asunto(s)
Gases/química , Protoporfirinas/química , Modelos Moleculares , Conformación Molecular , Espectrofotometría InfrarrojaRESUMEN
Isobaric tags have been widely used for the identification and quantification of proteins in mass spectrometry-based proteomics. The mass-balanced, (1) H/(2) H isotope-coded dipeptide tag (MBIT) is a multifunctional isobaric tag based on N-acetyl-Ala-Ala dipeptide containing an amine-reactive linker that conjugates the tag to the primary amines of proteolytic peptides. MBITs provide a pair of isotope-coded quantitation signals separated by 3 Da, which enables 2-plex quantification and identification of proteins in the 15-250 fmol range. Various MBITs diversified at the N-acetyl group or at the side chain of the first alanine provide a pair of bs ions as low-mass quantitation signals in a distinct mass window. Thus, a combination of different MBITs allows multiplex quantification of proteins in a single liquid chromatography-mass spectrometry experiment. Unlike other isobaric tags, MBITs also offer a pair of ys ions as high-mass quantitation signals in a noise-free region, facilitating protein quantification in quadrupole ion trap mass spectrometers. Uniquely, bS ions, forming N-protonated oxazolone, undergo unimolecular dissociation and generate the secondary low-mass quantitation signals, aS ions. The yield of aS ions derived from bS ions can be used to measure the temperature of bS ions, which enables a reproducible acquisition of the peptide tandem mass spectra. Thus, MBITs enable multiplexed quantitation of proteins and the concurrent measurement of ion temperature using bS and aS signal ions as well as the isobaric protein quantitation in resonance-type ion trap using yS (complement of bS ) signal ions. This review provides an overview of MBITs with a focus on the multi-functionality that has been successfully demonstrated in the peptide tandem mass spectrometry.
Asunto(s)
Proteínas HSP90 de Choque Térmico/química , Marcaje Isotópico/métodos , Péptidos/análisis , Proteínas de Saccharomyces cerevisiae/química , Aminoácidos/análisis , Benzoquinonas/farmacología , Carbazoles/farmacología , Expresión Génica , Proteínas HSP90 de Choque Térmico/genética , Lactamas Macrocíclicas/farmacología , Nocodazol/farmacología , Oxazoles/química , Péptidos/química , Piperazinas/farmacología , Saccharomyces cerevisiae/efectos de los fármacos , Saccharomyces cerevisiae/genética , Saccharomyces cerevisiae/metabolismo , Proteínas de Saccharomyces cerevisiae/genética , Espectrometría de Masa por Láser de Matriz Asistida de Ionización Desorción , Estrés Fisiológico , Espectrometría de Masas en TándemRESUMEN
Polyalanine based peptides that carry a lysine at the C-terminus ([Ac-AlanLys + H](+)) are known to form α-helices in the gas phase. Three factors contribute to the stability of these helices: (i) the interaction between the helix macro dipole and the charge, (ii) the capping of dangling C[double bond, length as m-dash]O groups by lysine and (iii) the cooperative hydrogen bond network. In previous studies, the influence of the interaction between the helix dipole and the charge as well as the impact of the capping was studied intensively. Here, we complement these findings by systematically assessing the third parameter, the H-bond network. In order to selectively remove one H-bond along the backbone, we use amide-to-ester substitutions. The resulting depsi peptides were analyzed by ion-mobility and m/z-selective infrared spectroscopy as well as theoretical calculations. Our results indicate that peptides which contain only one ester bond still maintain the helical conformation. We conclude that the interaction between the charge and the helix macro-dipole is most crucial for the formation of the α-helical conformation and a single backbone H-bond has only little influence on the overall stability.
RESUMEN
The charge distribution in a molecule is crucial in determining its physical and chemical properties. Aminobenzoic acid derivatives are biologically active small molecules, which have two possible protonation sites: the amine (N-protonation) and the carbonyl oxygen (O-protonation). Here, we employ gas-phase infrared spectroscopy in combination with ion mobility-mass spectrometry and density functional theory calculations to unambiguously determine the preferred protonation sites of p-, m-, and o-isomers of aminobenzoic acids as well as their ethyl esters. The results show that the site of protonation does not only depend on the intrinsic molecular properties such as resonance effects, but also critically on the environment of the molecules. In an aqueous environment, N-protonation is expected to be lowest in energy for all species investigated here. In the gas phase, O-protonation can be preferred, and in those cases, both N- and O-protonated species are observed. To shed light on a possible proton migration pathway, the protonated molecule-solvent complex as well as proton-bound dimers are investigated.
RESUMEN
Can the structures of small to medium-sized proteins be conserved after transfer from the solution phase to the gas phase? A large number of studies have been devoted to this topic, however the answer has not been unambiguously determined to date. A clarification of this problem is important since it would allow very sensitive native mass spectrometry techniques to be used to address problems relevant to structural biology. A combination of ion-mobility mass spectrometry with infrared spectroscopy was used to investigate the secondary and tertiary structure of proteins carefully transferred from solution to the gas phase. The two proteins investigated are myoglobin and ß-lactoglobulin, which are prototypical examples of helical and ß-sheet proteins, respectively. The results show that for low charge states under gentle conditions, aspects of the native secondary and tertiary structure can be conserved.
Asunto(s)
Lactoglobulinas/química , Mioglobina/química , Espectrometría de Masas , Modelos Moleculares , Conformación Proteica , Solventes/químicaRESUMEN
The immediate environment of a molecule can have a profound influence on its properties. Benzocaine, the ethyl ester of para-aminobenzoic acid that finds an application as a local anesthetic, is found to adopt in its protonated form at least two populations of distinct structures in the gas phase, and their relative intensities strongly depend on the properties of the solvent used in the electrospray ionization process. Here, we combine IR-vibrational spectroscopy with ion mobility-mass spectrometry to yield gas-phase IR spectra of simultaneously m/z and drift-time-resolved species of benzocaine. The results allow for an unambiguous identification of two protomeric species: the N- and O-protonated forms. Density functional theory calculations link these structures to the most stable solution and gas-phase structures, respectively, with the electric properties of the surrounding medium being the main determinant for the preferred protonation site. The fact that the N-protonated form of benzocaine can be found in the gas phase is owed to kinetic trapping of the solution-phase structure during transfer into the experimental setup. These observations confirm earlier studies on similar molecules where N- and O-protonation have been suggested.
Asunto(s)
Anestésicos Locales/química , Benzocaína/química , Modelos Moleculares , Protones , Solventes , Espectrometría de Masa por Ionización de Electrospray , Espectrofotometría InfrarrojaRESUMEN
Cyclodextrins (CDs) exhibit versatile self-assembly properties due to their hydrophilic and hydrophobic components, with applications such as drug delivery and selective binding. While research on CD self-assembly is extensive, limited studies have explored their aggregation behavior, particularly in interactions with small ionic guests. The present work investigates the structure of ß-CD tetramers aggregated with alkali metal chloride clusters using ion mobility spectrometry-mass spectrometry (IMS-MS). The results revealed that diverse structures emerge in the tetramer depending on the alkali metal cluster size. Notably, the doubly charged tetramer exhibits distinct aggregation trends with specific numbers of MCl clusters for Na+ and K+ ions. After initially adopting a bucket-wheel structure with two internal cations, the structure transforms into a new isomer with a tetrahedral configuration upon cluster addition. The formation of the new isomer structure is closely linked to filling the cavity volume with MCl clusters and ionic interactions, which possibly compensate for the weakened hydrogen bonds between CDs. Theoretical calculations further support the structures, showing well-matched collision cross-section (CCS) values compared with the experimental CCS values. This study highlights the role of alkali metal chloride clusters as potential templates, leading to the formation of novel CD assemblies.
RESUMEN
A simplified and stepwise synthetic method for producing sterically congested unsymmetrical 1,2-dicarbonyl radicals was successfully demonstrated including detailed characterization of each radical cation. Using this approach, an aryl- and N-heterocyclic carbene-substituted 1,2-dicarbonyl radical in its neutral form is generated, revealing the stabilizing role of N-heterocyclic carbenes.