Phytochemical characterization and anti-arthritic potential of Croton bonplandianus leaves extract: In-vivo and in-silico approach.

Croton bonplandianus, a natural source traditionally used for treating various illnesses, including rheumatoid arthritis, was evaluated in this study. The effects of ethanolic extracts (CBEE) and aqueous fractions (CBAF) of C. bonplandianus leaves on arthritis-induced inflammation were studied using an albino rat model of inflammation induced by Freund's complete adjuvant. Eight test groups (n = 5 per group) and one vehicle control were used to evaluate the antiarthritic effects of different doses of CBEE and CBAF (125 mg.kg-1, 250 mg.kg-1, and 500 mg.kg-1) on days 5, 10, 15, and 20 compared to arthritic and vehicle controls. Arthritis severity was assessed using macroscopic arthritis grading, histological analysis, body weights, and paw thickness. CBEE and CBAF were found to reduce the prevalence of arthritis, increase body weight, and decrease paw inflammation compared to the vehicle control group by the 23rd day. In addition, they showed no effect on biochemical parameters, but a significant difference (p < 0.05) in hematological parameters compared to the arthritic control group. The study identified Hentriacontane compound as a potential contributor to the anti-inflammatory effect of C. bonplandianus, as it showed the lowest dock score for IL-1ß and IL-6. Palmitoylethanol amide was identified as a potential contributor to the anti-inflammatory effect of TNF-α. Gene expression of IL-6, IL-1ß, and TNF-α was down-regulated significantly (p < 0.05) in a dose-dependent manner in all treatment groups compared to the arthritic control group. In conclusion, this study validated the anti-arthritic and anti-inflammatory properties of CBEE and CBAF in a time and dose-dependent manner.

Piperine phytosomes for bioavailability enhancement of domperidone.

The markedly low oral bioavailability of domperidone (anti-emetic drug) is associated with rapid first-pass metabolism in the intestine and liver. To counteract such affects, there is a need to devise a strategy to enhance absorption and subsequently bioavailability. Thus, the current study was aimed at synthesizing phytosomes consisting of phosphatidylcholine and piperine (a P-glycoprotein inhibitor). Phytosomes were prepared by salting-out method. The developed phytosomes were extensively characterized for size, zeta potential, polydispersity index, entrapment efficiency (EE %), infra-red spectroscopy, X-ray diffraction, in vitro drug release, ex vivo permeation, in vivo pharmacokinetic and toxicity. The engineered formulations of phytosomes with piperine exhibited a significant improvement in oral bioavailability of domperidone (79.5%) in comparison with the pure drug suspension under the same conditions. Pharmacokinetic parameters such as maximal plasma concentration (Cmax) and the plasma concentration (estimated from area under the curve; AUC) of domperidone have been greatly increased relative to drug alone. The improved drug absorption was attributed to inhibition of P-glycoprotein transporter. The findings of current research work suggest that the optimized phytosomes based drug delivery containing phytochemicals as bioenhancers have the potential to improve bioavailability of poorly bioavailable drugs that are substrate to P-glycoprotein.

Synthesis and in vitro characterization of chlorpheneramine-laden liposomes for topical applications.

This study was aimed at synthesizing liposomes for the topical delivery of chlorpheneramine maleate using three-level factorial design. Each experiment consisted of a varying proportion of cholesterol, lecithin and a permeation enhancer mixture of Tween80 and polyethylene glycol (PEG1000), and resultant liposomes were extensively characterized. The drug release study was conducted at 6.0 pH, 37±1ºC temperature and 100 rpm rotation speed utilizing a cellophane membrane pouch in a USP type II dissolution apparatus. Among formulations, L5 was considered as the optimal formulation because of high drug loading (99.05%), 87.71% drug release within 4 hours, high drug loading and the optimized formulation was found to be stable during stability testing. This high drug loading and release was achieved at low level of cholesterol and lecithin (0.1: 0.3g) and high level of permeation enhancer mixture (0.2g) as revealed by the surface plots. The drug release from the optimized formulation followed Fickian diffusion as revealed by Korsmeyers-Peppas kinetic model. In summary, combination of PEG1000 and Tween80 with lecithin and cholesterol can be successfully used to develop liposomes that efficiently incorporated chlorpheneramine. This formulation therefore has the potential to be used as a topical anti-allergic product.

Formulation and optimization of dimenhydrinate emulgels for topical delivery using response surface methodology.

Development of dimenhydrinate (DMN) emulgel formulation has been described in this work with enhanced permeation for transdermal delivery of DMN for effective management of motion sickness. Various DMN emulgel formulations were prepared using central composite design in response surface methodology. Propylene glycol and olive oil were used in varying ratios as permeation enhancers along-with carbopol-934 as gelling agent. Prepared formulations were evaluated by physico-chemical properties, stability and Fourier transform infrared spectroscopy (FTIR) studies. In-vitro drug release was studied using cellophane membrane. Formulation F2 showed maximum drug permeation following diffusion-based release mechanism and was used in further studies. Rat skin was used in Franz cell for ex-vivo studies to determine various permeation kinetic parameters. FTIR studies provided no evidence of chemical interaction between DMN and polymers used, whereas molecular docking revealed formation of a stable complex in the presence of aqueous environment with stable intermolecular binding and the complex was well hydrated. No evidence of skin irritation was observed in human volunteers following application of the optimized formulation. Histopathology data of the rat skin showed a decreased proliferation of the lymphocytes whereas monocytes were induced. In conclusion, combination of propylene glycol and olive oil was successfully employed for delivery of DMN through transdermal route with good permeability and prolonged release time that can be highly beneficial in treating motion sickness in unusual circumstances.

Dose Issues in Cancer Chemotherapy.

In this review, human methotrexate dosing regimens, as well as their relationship to data from in vitro cell culture and in vivo animal and human studies, are discussed. Low-dose, intermediate-dose, and high-dose therapies are covered. Since in vitro and in vivo screenings of potential cancer drugs are commonplace in the development of cancer chemotherapy, comparisons of the three criteria for effectiveness are important.

Formulation and characterization of lornoxicam-loaded cellulosic-microsponge gel for possible applications in arthritis.

Rheumatoid arthritis (RA) is an autoimmune disease associated with severe joint pain. Herein, we report lornoxicam loaded cellulosic microsponge gel formulation with sustained anti-inflammatory effects that are required to manage arthritic pain. The microsponges were formulated using quasi emulsion-solvent diffusion method employing four different surfactant systems, namely polyvinyl alcohol (PVA), Tween80, Gelucire 48/16 and Gelucire 50/13. All the lornoxicam loaded microsponge formulations were extensively characterized with a variety of analytical tools. The optimized microsponge formulation was then converted into gel formulation. The lornoxicam loaded microsponge gel formulation had adequate viscosity and sufficient pharmaceutical properties as confirmed by the texture analysis and the drug release followed Super case II transport. It is noteworthy that we described the preparation of a new cellulosic polymers based microsponge system for delivery of lornoxicam to provide quick as well as lasting (sustained) anti-inflammatory effects in rats using carrageenan induced rat paw edema model. We were able to demonstrate a 72% reduction in inflammation within 4 h using the optimize transdermal gel formulation utilizing Transcutol P as permeation enhancer and with the aid of skin micro-piercing by microneedles, hence, demonstrating the potential of this microsponge gel formulation in arthritis management.

Influence of sodium starch glycolate, croscarmellose sodium and crospovidone on disintegration and dissolution of stevia-loaded tablets.

BACKGROUND: Sugar substitutes are used by diabetic, obese and calorie-conscious people. As artificial sweeteners are harmful to the body, natural sweeteners are more suitable. Sugar substitutes are available on the market in tablet forms, which are added to hot or cold drinks. Rapid disintegration and dissolution of sugar substitute-loaded tablet is desired. However, the tablets should be hard enough to maintain their integrity during mechanical shocks. OBJECTIVES: The objective of this research was to develop rapidly disintegrating and dissolving stevia-loaded tablets with appropriate wetting, hardness and friability. MATERIAL AND METHODS: Several tablets were prepared using different superdisintegrants using the direct compression method. Flowability tests of the powder blends were performed before compression; these test took into account such physical parameters as bulk density, tapped density, angle of repose, compressibility index, and Hausner's ratio. Evaluation of the compressed cores was accomplished with weight variation, hardness, thickness, friability, disintegration time, wetting time, and dissolution. RESULTS: The disintegration time and wetting time of the tablets were in the following order: sodium starch glycolate > croscarmellose sodium > crospovidone containing tablets. A powder blend consisting of stevia extract, crospovidone, lactose, and magnesium stearate at the optimized ratio of 15/2.5/32/0.5 (w/w/w/w) showed the best flow, rapid disintegration (38 ±0.894 s), wetting (30 ±1 s), and dissolution (~ 95% in 1 min). Moreover, this formulation showed more rapid wetting (30 ±1 s vs 91 ±1.9 s), disintegration (38 ±0.894 s vs 143 ±1.276 s) and dissolution (~ 95% vs 60% in 1 min) than a commercial product. CONCLUSIONS: The tablet consisting of stevia, crospovidone, lactose, and magnesium stearate at the weight ratio of 15/2.5/32/0.5 showed excellent results with regards to dissolution and disintegration; accordingly, this formulation could be a potential sugar substitute for diabetic, obese and/or calorie-conscious individuals.

Influence of levodropropizine and hydroxypropyl-ß-cyclodextrin association on the physicochemical characteristics of levodropropizine loaded in hydroxypropyl-ß-cyclodextrin microcontainers: Formulation and in vitro characterization.

BACKGROUND: Poorly water-soluble drugs do not dissolve well in aqueous-based gastrointestinal fluid; therefore, they are not well absorbed. Thus, employing a suitable solubility enhancing technique is necessary for such a drug. Drug/HP­ß­CD complexation is a promising way to improve solubility and dissolution of a poorly water-soluble drug. Levodropropizine was used as a model drug in this study. OBJECTIVES: The purpose of this research was to enhance the aqueous solubility and dissolution rate of levodropropizine by employing the inclusion complexation technique. MATERIAL AND METHODS: A microparticle formulation was prepared from levodropropizine and hydroxypropyl-ß-cyclodextrin (HP­ß­CD) in a 1:1 molar ratio through the spray-drying technique. The host-guest relationship between levodropropizine and HP­ß­CD was also investigated using the molecular docking computational methodology. The aqueous solubility and dissolution rate of levodropropizine in formulations were assessed and compared with those of the drug alone. X-ray diffraction (XRD), differential scanning calorimetry (DSC), scanning electron microscopy (SEM), and Fourier transform infrared spectroscopy (FTIR) were applied for the solid-state characterization of the prepared samples. RESULTS: According to the research outcomes, the levodropropizine/HP­ß­CD formulation had enhanced the aqueous solubility (351.12 ±13.26 vs 92.76 ±5.00 mg/mL) and dissolution rate (97.83 ±3.36 vs 3.12 ±1.76% in 10 min) of levodropropizine, compared to the plain drug powder. The levodropropizine/ HP­ß­CD formulation had converted the crystalline drug into its amorphous counterpart. Furthermore, no covalent interaction was found to exist between levodropropizine and HP­ß­CD. The spray-dried particles were discrete. Each particle had a shriveled appearance. CONCLUSIONS: The levodropropizine/HP­ß­CD formulation is, therefore, recommended for the more effective administration of levodropropizine through the oral route.

Development and validation of a stability-Indicating RP-HPLC method for simultaneous estimation of sofosbuvir and velpatasvir in fixed dose combination tablets and plasma.

A simple, specific, sensitive, robust, accurate and precise reverse-phase high performance liquid chromatographic (RP-HPLC) method was developed and validated for simultaneous determination of sofosbuvir (SOF) and velpatasvir (VLP) in fixed dose combination tablets and plasma. Validation parameters, such as system suitability, accuracy, inter-day and intra-day variances, specificity, linearity, limit of detection (LOD), limit of quantification (LOQ), robustness and stability were assessed following the standards set by the International Conference on Harmonization (ICH). The isocratic elution of SOF and VLP was carried out under ambient conditions using ammonium acetate buffer (pH = 7.0), acetonitrile and methanol (20:40:40, v/v/v) as mobile phase flowing through a Promosil C18 column at a flow rate of 1.0 mL/min. The average retention time of SOF and VLP was 3.72 min and 7.09 min, respectively. The LOD and LOQ of SOF were 0.23µg/mL and 2.48µg/mL, respectively; while those of VLP were 0.70µg/mL and 7.52µg/mL, respectively. The regression coefficient (r2) was 0.998. The relative standard deviation (RSD) was less than 2% for precision. The recovery of both the analytes remained within 100±1%. All other validation parameters complied with ICH guidelines. The analytes remained stable throughout the analytical procedure. Moreover, this method was successfully applied to assess the in vitro dissolution of SOF and VLP loaded fixed dose combination tablets. Same method with same mobile phase was applied on rat plasma and there was no interference.

Facile synthesis of mesoporous silica nanoparticles using modified sol-gel method: Optimization and in vitro cytotoxicity studies.

The present study describes the synthesis of mesoporous silica nanoparticles using a modified sol-gel method. Various proportions of acetonitrile-water mixtures were utilized so as to optimize the reaction mixture for facile synthesis of mesoporous silica nanoparticles with controlled particle size for the very first time. After carefully adjusting the water and acetonitrile contents i.e. to 1:1 v/v ratio, a more uniform and small sized nanoparticles were achieved. The resultant particles were 140 nm in size having pore size of approximately 5.9 nm and were safe to be used in the cellular system, as confirmed by the in vitro cytotoxicity studies.

The preparation and physicochemical characterization of eprosartan mesylate-laden polymeric ternary solid dispersions for enhanced solubility and dissolution rate of the drug.

BACKGROUND: Eprosartan mesylate is a poorly water-soluble drug. It does not dissolve well in the aqueous gastrointestinal fluid, which means it is not absorbed well via the oral route, because a drug can cross cell membranes when it is dissolved in the gastrointestinal fluid. OBJECTIVES: The purpose of this research was to enhance the aqueous solubility and dissolution rate of eprosartan mesylate using the solid dispersion technique. Enhancing the solubility and dissolution leads to better absorption via the oral route. MATERIAL AND METHODS: A number of eprosartan mesylate-laden polymeric solid dispersions were prepared with hydroxypropyl methylcellulose (HPMC) and polysorbate 80 by means of the solvent evaporation technique. The impact of the weight ratios of the constituents on the solubility and dissolution rate was studied in comparison with the plain drug. The formulation presenting the optimal solubility and dissolution underwent the solid-state characterization using X-ray diffraction (XRD), differential scanning calorimetry (DSC), scanning electron microscopy (SEM), and Fourier-transform infrared spectroscopy (FTIR). RESULTS: Both polysorbate 80 and HPMC positively affected the solubility and dissolution of eprosartan mesylate. CONCLUSIONS: In particular, a ternary solid dispersion consisting of eprosartan mesylate, HPMC and polysorbate 80 at a weight ratio of 1:4.2:0.3 showed the highest solubility (36.39 ± 3.95 mg/mL) and dissolution (86.19 ±4.09% in 10 min). Moreover, the drug was present in the amorphous form in the solid dispersion with no covalent drug-excipient interactions.

Recent advances of electrospray technique for multiparticulate preparation: Drug delivery applications.

The electrospray (ES) technique has proven to be an effective and a versatile approach for crafting drug delivery carriers with diverse dimensions, multiple layers, and varying morphologies. Achieving the desired particle properties necessitates careful optimization of various experimental parameters. This review delves into the most prevalent ES system configurations employed for this purpose, such as monoaxial, coaxial, triaxial, and multi-needle setups with solid or liquid collector. In addition, this work underscores the significance of ES in drug delivery carriers and its remarkable ability to encapsulate a wide spectrum of therapeutic agents, including drugs, nucleic acids, proteins, genes and cells. Depth examination of the critical parameters governing the ES process, including the choice of polymer, surface tension, voltage settings, needle size, flow rate, collector types, and the collector distance was conducted with highlighting on their implications on particle characteristics, encompassing morphology, size distribution, and drug encapsulation efficiency. These insights illuminate ES's adaptability in customizing drug delivery systems. To conclude, this review discusses ES process optimization strategies, advantages, limitations and future directions, providing valuable guidance for researchers and practitioners navigating the dynamic landscape of modern drug delivery systems.

Chemically cross-linked poly(acrylic-co-vinylsulfonic) acid hydrogel for the delivery of isosorbide mononitrate.

We report synthesis, characterization, and drug release attributes of a series of novel pH-sensitive poly(acrylic-co-vinylsulfonic) acid hydrogels. These hydrogels were prepared by employing free radical polymerization using ethylene glycol dimethacrylate (EGDMA) and benzyl peroxide (BPO) as cross-linker and initiator, respectively. Effect of acrylic acid (AA), polyvinylsulfonic acid (PVSA), and EGDMA on prepared hydrogels was investigated. All formulations showed higher swelling at high pHs and vice versa. Formulations containing higher content of AA and EGDMA show reduced swelling, but one with higher content of PVSA showed increased swelling. Hydrogel network was characterized by determining structural parameters and loaded with isosorbide mononitrate. FTIR confirmed absence of drug polymer interaction while DSC and TGA demonstrated molecular dispersion of drug in a thermally stable polymeric network. All the hydrogel formulations exhibited a pH dependent release of isosorbide mononitrate which was found to be directly proportional to pH of the medium and PVSA content and inversely proportional to the AA contents. Drug release data were fitted to various kinetics models. Results indicated that release of isosorbide mononitrate from poly(AA-co-VSA) hydrogels was non-Fickian and that the mechanism was diffusion-controlled.

Applying response surface methodology to optimize nimesulide permeation from topical formulation.

Nimesulide is a non-steroidal anti-inflammatory drug that acts through selective inhibition of COX-2 enzyme. Poor bioavailability of this drug may leads to local toxicity at the site of aggregation and hinders reaching desired therapeutic effects. This study aimed at formulating and optimizing topically applied lotions of nimesulide using an experimental design approach, namely response surface methodology. The formulated lotions were evaluated for pH, viscosity, spreadability, homogeneity and in vitro permeation studies through rabbit skin using Franz diffusion cells. Data were fitted to linear, quadratic and cubic models and best fit model was selected to investigate the influence of permeation enhancers, namely propylene glycol and polyethylene glycol on percutaneous absorption of nimesulide from lotion formulations. The best fit quadratic model explained that the enhancer combination at equal levels significantly increased the flux and permeability coefficient. The model was validated by comparing the permeation profile of optimized formulations' predicted and experimental response values, thus, endorsing the prognostic ability of response surface methodology.

In Vitro and Biological Characterization of Dexamethasone Sodium Phosphate Laden pH-Sensitive and Mucoadhesive Hydroxy Propyl ß-Cyclodextrin-g-poly(acrylic acid)/Gelatin Semi-Interpenetrating Networks.

The current study reports the fabrication and biological evaluation of hydroxy propyl ß-cyclodextrin-g-poly(acrylic acid)/gelatin (HP-ß-CD-g-poly(AA)/gelatin) semi-interpenetrating networks (semi-IPN) for colonic delivery of dexamethasone sodium phosphate (DSP). The prepared hydrogels showed pH-dependent swelling and mucoadhesive properties. The mucoadhesive strength of hydrogels increased with an increasing concentration of gelatin. Based on the swelling and mucoadhesive properties, AG-1 was chosen as the optimized formulation (0.33% w/w of gelatin and 16.66% w/w of AA) for further analysis. FTIR revealed the successful development of a polymeric network without any interaction with DSP. SEM images revealed a slightly rough surface after drug loading. Drug distribution at the molecular level was confirmed by XRD. In vitro drug release assay showed pH-dependent release, i.e., a minute amount of DSP was released at a pH of 1.2 while 90.58% was released over 72 h at pH 7.4. The optimized formulation did not show any toxic effects on a rabbit's vital organs and was also hemocompatible, thus confirming the biocompatible nature of the hydrogel. Conclusively, the prepared semi-IPN hydrogel possessed the necessary features, which can be exploited for the colonic delivery of DSP.

Development and pharmacological evaluation of vancomycin loaded chitosan films.

Burn injuries are the most prevalent and devastating form of skin trauma. Current study aimed to fabricate novel chitosan-based composite films of vancomycin for wound healing applications. The developed vancomycin-chitosan films were evaluated for various quality attributes and were subjected to anti-bacterial activity against methicillin resistant Staphylococcus aureus (MRSA) and wound healing efficacy study in rat model. The prepared vancomycin-chitosan film 2 (VCF2) physically displayed a substantial tensile strength and swelling ratio. Pharmacologically, VCF2 exhibited sustained vancomycin release, excellent antibacterial activity and improved wound healing efficacy in rats. The superior wound healing potential was ascribed to the enhanced levels of reduced glutathione, glutathione-S-transferase, catalase and decreased lipid peroxidation. Furthermore, improved angiogenesis, granulation, epidermal regeneration and down regulation in the expressions of tumor necrosis factor, cyclooxygenase-2 and nuclear factor kappa B were the reasons of improved wound healing as confirmed by histopathological and molecular techniques. Thus, it is plausible to say that VCF2 could provide a potential therapeutic approach in burn wounds.

Gellan Gum-Based Bilayer Mucoadhesive Films Loaded with Moxifloxacin Hydrochloride and Clove Oil for Possible Treatment of Periodontitis.

BACKGROUND/OBJECTIVE: Periodontitis is a widely spread oral infection and various antibiotics are utilized for its treatment, but high oral doses and development of antibiotic resistance limit their use. This study was aimed at development of natural polymer-based mucoadhesive bilayer films loaded with moxifloxacin hydrochloride (Mox) and clove essential oil (CEO) to potentially combat bacterial infection associated with periodontitis. METHODS: Films were synthesized by double solvent casting technique having an antibiotic in the gellan gum-based primary layer with clove oil in a hydroxyethyl cellulose-based secondary layer. RESULTS: Prepared films were transparent, flexible, and showed high antibacterial response against both gram-positive and gram-negative bacteria. The films showed excellent pharmaceutical attributes in terms of drug content, folding endurance, swelling index, and mucoadhesive strength. Solid state characterization of formulation showed successful incorporation of drug and oil in separate layers of hydrogel structure. An in-vitro release study showed an initial burst release of drug followed by sustained release for up to 48 hours. CONCLUSION: The prepared mucoadhesive bilayer buccal films could be used as a potential therapeutic option for the management of periodontitis.

Onychomycosis: Current Understanding and Strategies for Enhancing Drug Delivery into Human Nail Tissue.

BACKGROUND: Onychomycosis is by far the most common finger or toe nail fungal infectious disease caused by dermatophytes, non-dermatophytic molds or yeast. It accounts for 50% of the total nail disorders, and affects patients physically, socially, and psychologically and can seriously influence their quality of life. OBJECTIVES: Oral antifungals are routinely used to treat the nail fungal disease; however oral therapy is associated with severe side effects and longer treatment times. In recent years, drug delivery directly into the nail or nail bed has gained attention and various topical products have been tested that can cure the disease when applied topically or transungually. Nevertheless, drug penetration into and through the nail is not straightforward and requires chemicals to improve its permeability or by applying physical stress to promote drug penetration into and through the nail. This lucid review presents an overview of various causes of onychomycosis, current therapeutic approaches, and efforts aimed at increasing the permeability of nails through various strategies such as chemical, physical and mechanical methods for permeation enhancement. CONCLUSION: Various strategies have been proposed for the treatment of onychomycosis, however, much research into a more precise and effective therapy is still required.

Drug Delivery Approaches for Managing Overactive Bladder (OAB): A Systematic Review.

Overactive bladder syndrome (OAB) is characterised by urgency symptoms, with or without urgency incontinence, usually with frequency and nocturia and severely affects the quality of life. This systematic review evaluates the various drug delivery strategies used in practice to manage OAB. Advanced drug delivery strategies alongside traditional strategies were comprehensively analysed and comparatively evaluated. The present review was conducted according to the preferred reporting items for systematic reviews and meta-analyses guidelines. A total of 24 studies reporting the development of novel formulations for the treatment of OAB were considered eligible and were further categorised according to the route of drug administration. The review found that various drug delivery routes (transdermal, intravesicular, oral, vaginal and intramuscular) are used for the administration of drugs for managing OAB, however, the outcomes illustrated the marked potential of transdermal drug delivery route. The findings of the current review are expected to be helpful for pharmaceutical scientists to better comprehend the existing literature and challenges and is anticipated to provide a basis for designing and fabricating novel drug delivery systems to manage OAB.

Optimization, in vitro release and toxicity evaluation of novel pH sensitive itaconic acid-g-poly(acrylamide)/sterculia gum semi-interpenetrating networks.

BACKGROUND: In recent era, pH sensitive polymeric carriers that combines the materials engineering and medicine is gaining researcher's attention as they maximizes drug concentration at site of absorption and reduces side effects for e.g. orally administered cetirizine HCl (CTZ HCl) upsets the stomach and furthermore shows high intestinal absorption. Thus, development of pH sensitive hydrogels with sufficient mechanical strength will be good candidate to address this issue. METHODS: Here, we developed pH sensitive itaconic acid-g-poly(acrylamide)/sterculia gum (IA-g-poly(AM)/sterculia gum) semi-interpenetrating network (semi-IPN) by free radical polymerization technique for intestinal delivery of CTZ HCL. RESULTS: Optimized formulation (I5) with 6% w/w IA showed negligible swelling at pH 1.2, and maximum swelling at pH 7.4. Solid state characterization of optimized formulation showed successful development of semi-IPN structure and incorporation of drug without any noticeable drug-carrier interaction. In vitro release study showed biphasic pH dependent release of CTZ HCl, where initial burst release was observed at acidic pH followed by sustained release at basic pH. Acute oral toxicity and histopathological studies confirmed the non-toxic nature of IA-g-poly(AM)/sterculia gum. CONCLUSION: Conclusively, developed biocompatible semi-IPN hydrogels with sufficient pH sensitivity and mechanical strength could serve as a potential carrier for intestinal delivery of CTZ HCL to maximize its absorption and reduce side effects.