Constrained C2 adsorbate orientation enables CO-to-acetate electroreduction.

The carbon dioxide and carbon monoxide electroreduction reactions, when powered using low-carbon electricity, offer pathways to the decarbonization of chemical manufacture1,2. Copper (Cu) is relied on today for carbon-carbon coupling, in which it produces mixtures of more than ten C2+ chemicals3-6: a long-standing challenge lies in achieving selectivity to a single principal C2+ product7-9. Acetate is one such C2 compound on the path to the large but fossil-derived acetic acid market. Here we pursued dispersing a low concentration of Cu atoms in a host metal to favour the stabilization of ketenes10-chemical intermediates that are bound in monodentate fashion to the electrocatalyst. We synthesize Cu-in-Ag dilute (about 1 atomic per cent of Cu) alloy materials that we find to be highly selective for acetate electrosynthesis from CO at high *CO coverage, implemented at 10 atm pressure. Operando X-ray absorption spectroscopy indicates in situ-generated Cu clusters consisting of <4 atoms as active sites. We report a 12:1 ratio, an order of magnitude increase compared to the best previous reports, in the selectivity for acetate relative to all other products observed from the carbon monoxide electroreduction reaction. Combining catalyst design and reactor engineering, we achieve a CO-to-acetate Faradaic efficiency of 91% and report a Faradaic efficiency of 85% with an 820-h operating time. High selectivity benefits energy efficiency and downstream separation across all carbon-based electrochemical transformations, highlighting the importance of maximizing the Faradaic efficiency towards a single C2+ product11.

Amorphous Oxyhalide Matters for Achieving Lithium Superionic Conduction.

The recently surged halide-based solid electrolytes (SEs) are great candidates for high-performance all-solid-state batteries (ASSBs), due to their decent ionic conductivity, wide electrochemical stability window, and good compatibility with high-voltage oxide cathodes. In contrast to the crystalline phases in halide SEs, amorphous components are rarely understood but play an important role in Li-ion conduction. Here, we reveal that the presence of amorphous component is common in halide-based SEs that are prepared via mechanochemical method. The fast Li-ion migration is found to be associated with the local chemistry of the amorphous proportion. Taking Zr-based halide SEs as an example, the amorphization process can be regulated by incorporating O, resulting in the formation of corner-sharing Zr-O/Cl polyhedrons. This structural configuration has been confirmed through X-ray absorption spectroscopy, pair distribution function analyses, and Reverse Monte Carlo modeling. The unique structure significantly reduces the energy barriers for Li-ion transport. As a result, an enhanced ionic conductivity of (1.35 ± 0.07) × 10-3 S cm-1 at 25 °C can be achieved for amorphous Li3ZrCl4O1.5. In addition to the improved ionic conductivity, amorphization of Zr-based halide SEs via incorporation of O leads to good mechanical deformability and promising electrochemical performance. These findings provide deep insights into the rational design of desirable halide SEs for high-performance ASSBs.

The Role of Bismuth in Suppressing the CO Poisoning in Alkaline Methanol Electrooxidation: Switching the Reaction from the CO to Formate Pathway.

While tuning the electronic structure of Pt can thermodynamically alleviate CO poisoning in direct methanol fuel cells, the impact of interactions between intermediates on the reaction pathway is seldom studied. Herein, we contrive a PtBi model catalyst and realize a complete inhibition of the CO pathway and concurrent enhancement of the formate pathway in the alkaline methanol electrooxidation. The key role of Bi is enriching OH adsorbates (OHad) on the catalyst surface. The competitive adsorption of CO adsorbates (COad) and OHad at Pt sites, complementing the thermodynamic contribution from alloying Bi with Pt, switches the intermediate from COad to formate that circumvents CO poisoning. Hence, 8% Bi brings an approximately 6-fold increase in activity compared to pure Pt nanoparticles. This notion can be generalized to modify commercially available Pt/C catalysts by a microwave-assisted method, offering opportunities for the design and practical production of CO-tolerance electrocatalysts in an industrial setting.

(111) Facet-oriented Cu2Mg Intermetallic Compound with Cu3-Mg Sites for CO2 Electroreduction to Ethanol with Industrial Current Density.

The efficient ethanol electrosynthesis from CO2 is challenging with low selectivity at high CO2 electrolysis rates, due to the competition with H2 and other reduction products. Copper-based bimetallic electrocatalysts are potential candidates for the CO2-to-ethanol conversion, but the secondary metal has mainly been focused on active components (such as Ag, Sn) for CO2 electroreduction, which also promote selectivity of ethylene or other reduction products rather than ethanol. Limited attention has been given to alkali-earth metals due to their inherently active chemical property. Herein, we rationally synthesized a (111) facet-oriented nano Cu2Mg (designated as Cu2Mg(111)) intermetallic compound with high-density ordered Cu3-Mg sites. The in situ Raman spectroscopy and density function theory calculations revealed that the Cu3 - δ $_{^{\rm{{\rm \delta} }} }$ --Mg- δ $_{^{\rm{{\rm \delta} }} }$ + active sites allowed to increase *CO surface coverage, decrease reaction energy for *CO-CO coupling, and stabilize *CHCHOH intermediates, thus promoting the ethanol formation pathway. The Cu2Mg(111) catalyst exhibited a high FEC2H5OH of 76.2±4.8 % at 600 mA⋅cm-2, and a peak value of |jC2H5OH| of 720±34 mA⋅cm-2, almost 4 times of that using conventional Cu2Mg with (311) facets, comparable to the best reported values for the CO2-to-ethanol electroreduction.

Cubic Iodide Lix YI3+x Superionic Conductors through Defect Manipulation for All-Solid-State Li Batteries.

Halide solid electrolytes (SEs) have attracted significant attention due to their competitive ionic conductivity and good electrochemical stability. Among typical halide SEs (chlorides, bromides, and iodides), substantial efforts have been dedicated to chlorides or bromides, with iodide SEs receiving less attention. Nevertheless, compared with chlorides or bromides, iodides have both a softer Li sublattice and lower reduction limit, which enable iodides to possess potentially high ionic conductivity and intrinsic anti-reduction stability, respectively. Herein, we report a new series of iodide SEs: Lix YI3+x (x=2, 3, 4, or 9). Through synchrotron X-ray/neutron diffraction characterizations and theoretical calculations, we revealed that the Lix YI3+x SEs belong to the high-symmetry cubic structure, and can accommodate abundant vacancies. By manipulating the defects in the iodide structure, balanced Li-ion concentration and generated vacancies enables an optimized ionic conductivity of 1.04 × 10-3  S cm-1 at 25 °C for Li4 YI7 . Additionally, the promising Li-metal compatibility of Li4 YI7 is demonstrated via electrochemical characterizations (particularly all-solid-state Li-S batteries) combined with interface molecular dynamics simulations. Our study on iodide SEs provides deep insights into the relation between high-symmetry halide structures and ionic conduction, which can inspire future efforts to revitalize halide SEs.

Superionic Conducting Halide Frameworks Enabled by Interface-Bonded Halides.

The revival of ternary halides Li-M-X (M = Y, In, Zr, etc.; X = F, Cl, Br) as solid-state electrolytes (SSEs) shows promise in realizing practical solid-state batteries due to their direct compatibility toward high-voltage cathodes and favorable room-temperature ionic conductivities. Most of the reported superionic halide SSEs have a structural pattern of [MCl6]x- octahedra and generate a tetrahedron-assisted Li+ ion diffusion pathway. Here, we report a new class of zeolite-like halide frameworks, SmCl3, for example, in which 1-dimensional channels are enclosed by [SmCl9]6- tricapped trigonal prisms to provide a short jumping distance of 2.08 Å between two octahedra for Li+ ion hopping. The fast Li+ diffusion along the channels is verified through ab initio molecular dynamics simulations. Similar to zeolites, the SmCl3 framework can be grafted with halide species to obtain mobile ions without altering the base structure, achieving an ionic conductivity over 10-4 S cm-1 at 30 °C with LiCl as the adsorbent. Moreover, the universality of the interface-bonding behavior and ionic diffusion in a class of framework materials is demonstrated. It is suggested that the ionic conductivity of the MCl3/halide composite (M = La-Gd) is likely in correlation with the ionic conductivity of the grafted halide species, interfacial bonding, and framework composition/dimensions. This work reveals a potential class of halide structures for superionic conductors and opens up a new frontier for constructing zeolite-like frameworks in halide-based materials, which will promote the innovation of superionic conductor design and contribute to a broader selection of halide SSEs.

Over 2 A cm-2 CO2 -to-Ethanol Conversion by Alkali-Metal Cation Induced Copper With Dominant (200) Facets.

The high-rate ethanol electrosynthesis from CO2 is challenging due to the low selectivity and poor activity, which requires the competition with other reduction products and H2 . Here, the electrochemical reconstruction of Cs3 Cu2 Cl5 perovskite to form surface Cl-bonded, low-coordinated Cs modified Cu(200) nanocubes (CuClCs), is demonstrated. Density functional theory calculations reveal that the CuClCs structure possesses low Bader charges and a large coordination capacity; and thus, can promote the CO2 -to-ethanol pathway via stabilizing C-O bond in oxygenate intermediates. The CuClCs catalyst exhibits outstanding partial current densities for producing ethanol (up to 2124 ± 54 mA cm-2 ) as one of the highest reported values in the electrochemical CO2 or CO reduction. This work suggests an attractive strategy with surface alkali-metal cations for ampere-level CO2 -to-ethanol electrosynthesis.

Entropy Confinement Promotes Hydrogenolysis Activity for Polyethylene Upcycling.

Chemical upcycling that catalyzes waste plastics back to high-purity chemicals holds great promise in end-of-life plastics valorization. One of the main challenges in this process is the thermodynamic limitations imposed by the high intrinsic entropy of polymer chains, which makes their adsorption on catalysts unfavorable and the transition state unstable. Here, we overcome this challenge by inducing the catalytic reaction inside mesoporous channels, which possess a strong confined ability to polymer chains, allowing for stabilization of the transition state. This approach involves the synthesis of p-Ru/SBA catalysts, in which Ru nanoparticles are uniformly distributed within the channels of an SBA-15 support, using a precise impregnation method. The unique design of the p-Ru/SBA catalyst has demonstrated significant improvements in catalytic performance for the conversion of polyethylene into high-value liquid fuels, particularly diesel. The catalyst achieved a high solid conversion rate of 1106 g ⋅ gRu -1 ⋅ h-1 at 230 °C. Comparatively, this catalytic activity is 4.9 times higher than that of a control catalyst, Ru/SiO2 , and 14.0 times higher than that of a commercial catalyst, Ru/C, at 240 °C. This remarkable catalytic activity opens up immense opportunities for the chemical upcycling of waste plastics.

Ultra-Stable CsPbX3 @Pyrophosphate Nanoparticles in Water over One Year.

All-inorganic lead halide perovskite (CsPbX3 , X = Cl, Br, I, or their mixture) nanocrystals (NCs) have achieved inspiring advancements in optoelectronic fields but still suffer from poor durability when exposed to environmental stimuli such as water, irradiation and heat. Herein, a strategy of employing pyrophosphate as the inert shell for CsPbX3 NCs is reported. The strong binding between pyrophosphate and CsPbBr3 surface can stabilize the perovskite structure well. The as-obtained core@shell CsPbBr3 @NH4 AlP2 O7 NCs exhibit impressive stability against water and maintain the initial optical properties with negligible change in 400 days. Furthermore, significant improvement of irradiation/thermal resistance is realized due to the protecting role of pyrophosphate. The NCs can retain 100% and ≈90% of the original PL after hundreds of heating/cooling cycles and several hundred hours of UV light irradiation, respectively. As a result, the core@shell products can be directly used for high-resolution inkjet printing, enabling the printed fluorescent information to be resistant under harsh environmental conditions. This work provides a promising way for the synthesis of highly stable encapsulated perovskite NCs and demonstrates a great potential in practical applications.

Lithium Vacancy-Tuned [CuO4 ] Sites for Selective CO2 Electroreduction to C2+ Products.

Electrochemical CO2 reduction to valuable multi-carbon (C2+ ) products is attractive but with poor selectivity and activity due to the low-efficient CC coupling. Herein, a lithium vacancy-tuned Li2 CuO2 with square-planar [CuO4 ] layers is developed via an electrochemical delithiation strategy. Density functional theory calculations reveal that the lithium vacancies (VLi ) lead to a shorter distance between adjacent [CuO4 ] layers and reduce the coordination number of Li+ around each Cu, featuring with a lower energy barrier for COCO coupling than pristine Li2 CuO2 without VLi . With the VLi percentage of ≈1.6%, the Li2- x CuO2 catalyst exhibits a high Faradaic efficiency of 90.6 ± 7.6% for C2+ at -0.85 V versus reversible hydrogen electrode without iR correction, and an outstanding partial current density of -706 ± 32 mA cm-2 . This work suggests an attractive approach to create controllable alkali metal vacancy-tuned Cu catalytic sites toward C2+ products in electrochemical CO2 reduction.

Unveiling the Nature of Pt Single-Atom Catalyst during Electrocatalytic Hydrogen Evolution and Oxygen Reduction Reactions.

Single-atom catalysts (SACs) have attracted significant attention due to their superior catalytic activity and selectivity. However, the nature of active sites of SACs under realistic reaction conditions is ambiguous. In this work, high loading Pt single atoms on graphitic carbon nitride (g-C3 N4 )-derived N-doped carbon nanosheets (Pt1 /NCNS) is achieved through atomic layer deposition. Operando X-ray absorption spectroscopy (XAS) is performed on Pt single atoms and nanoparticles (NPs) in both the hydrogen evolution reaction (HER) and oxygen reduction reaction (ORR). The operando results indicate that the total unoccupied density of states of Pt 5d orbitals of Pt1 atoms is higher than that of Pt NPs under HER condition, and that a stable Pt oxide is formed during ORR on Pt1 /NCNS, which may suppress the adsorption and activation of O2 . This work unveils the nature of Pt single atoms under realistic HER and ORR conditions, providing a deeper understanding for designing advanced SACs.

CuO/Cu-MOF nanocomposite for highly sensitive detection of nitric oxide released from living cells using an electrochemical microfluidic device.

The integration of large surface area and high catalytic profiles of Cu-MOF and CuO nanoparticles is described toward electrochemical sensing of nitric oxide (NO) in a microfluidic platform. The CuO/Cu-MOF nanocomposite was prepared through hydrothermal method, and its formation was confirmed by scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray powder diffraction (XRD), X-ray photoelectron spectroscopy (XPS), and energy-dispersive X-ray spectroscopy (EDS). The CuO/Cu-MOF nanostructured modified Au electrodes enabled electrocatalytic NO oxidation at 0.6 V vs. reference electrode, demonstrating linear response over a broad concentration range of 0.03-1 µM and 1-500 µM with a detection limit of 7.8 nM. The interference effect of organic molecules and common ions was negligible, and the sensing system demonstrated excellent stability. Finally, an electrochemical microfluidic NO sensor was developed to detect of NO released from cancer cells, which were stimulated by L-arginine. Furthermore, in the presence of Fe3+, the stressed cells produced more NO. This work offers considerable potential for its practical applications in clinical diagnostics through determination of chemical symptoms in microliter-volume biological samples. Electrochemical microfluidic NO sensor was developed for detection of NO released from cancer cells. This miniaturized device consumes less materials and provides the basis for greener analytical chemistry.

Bismuth Oxyhydroxide-Pt Inverse Interface for Enhanced Methanol Electrooxidation Performance.

Developing efficient Pt-based electrocatalysts for the methanol oxidation reaction (MOR) is of pivotal importance for large-scale application of direct methanol fuel cells (DMFCs), but Pt suffers from severe deactivation brought by the carbonaceous intermediates such as CO. Here, we demonstrate the formation of a bismuth oxyhydroxide (BiOx(OH)y)-Pt inverse interface via electrochemical reconstruction for enhanced methanol oxidation. By combining density functional theory calculations, X-ray absorption spectroscopy, ambient pressure X-ray photoelectron spectroscopy, and electrochemical characterizations, we reveal that the BiOx(OH)y-Pt inverse interface can induce the electron deficiency of neighboring Pt; this would result in weakened CO adsorption and strengthened OH adsorption, thereby facilitating the removal of the poisonous intermediates and ensuring the high activity and good stability of Pt2Bi sample. This work provides a comprehensive understanding of the inverse interface structure and deep insight into the active sites for MOR, offering great opportunities for rational fabrication of efficient electrocatalysts for DMFCs.

Origin of Superionic Li3Y1-xInxCl6 Halide Solid Electrolytes with High Humidity Tolerance.

The high ionic conductivity, air/humidity tolerance, and related chemistry of Li3MX6 solid-state electrolytes (SSEs, M is a metal element, and X is a halogen) has recently gained significant interest. However, most of the halide SSEs suffer from irreversible chemical degradation when exposed to a humid atmosphere, which originates from hydrolysis. Herein, the function of the M atom in Li3MX6 was clarified by a series of Li3Y1-xInxCl6 (0 ≤ x < 1). When the ratio of In3+ was increased, a gradual structural conversion from the hexagonal-closed-packed (hcp) anion arrangement to cubic-closed-packed (ccp) anion arrangement has been traced. Compared to hcp anion sublattice, the Li3MX6 with ccp anion sublattice reveals faster Li+ migration. The tolerance of Li3Y1-xInxCl6 towards humidity is highly improved when the In3+ content is high enough due to the formation of hydrated intermediates. The correlations among composition, structure, Li+ migration, and humidity stability presented in this work provide insights for designing new halide-based SSEs.

Electron Localization and Lattice Strain Induced by Surface Lithium Doping Enable Ampere-Level Electrosynthesis of Formate from CO2.

The electrochemical CO2 conversion to formate is a promising approach for reducing CO2 level and obtaining value-added chemicals, but its partial current density is still insufficient to meet the industrial demands. Herein, we developed a surface-lithium-doped tin (s-SnLi) catalyst by controlled electrochemical lithiation. Density functional theory calculations indicated that the Li dopants introduced electron localization and lattice strains on the Sn surface, thus enhancing both activity and selectivity of the CO2 electroreduction to formate. The s-SnLi electrocatalyst exhibited one of the best CO2 -to-formate performances, with a partial current density of -1.0 A cm-2 for producing formate and a corresponding Faradaic efficiency of 92 %. Furthermore, Zn-CO2 batteries equipped with the s-SnLi catalyst displayed one of the highest power densities of 1.24 mW cm-2 and an outstanding stability of >800 cycles. Our work suggests a promising approach to incorporate electron localization and lattice strain for the catalytic sites to achieve efficient CO2 -to-formate electrosynthesis toward potential commercialization.

Engineering the Low Coordinated Pt Single Atom to Achieve the Superior Electrocatalytic Performance toward Oxygen Reduction.

Configuring metal single-atom catalysts (SACs) with high electrocatalytic activity and stability is one efficient strategy in achieving the cost-competitive catalyst for fuel cells' applications. Herein, the atomic layer deposition (ALD) strategy for synthesis of Pt SACs on the metal-organic framework (MOF)-derived N-doped carbon (NC) is proposed. Through adjusting the ALD exposure time of the Pt precursor, the size-controlled Pt catalysts, from Pt single atoms to subclusters and nanoparticles, are prepared on MOF-NC support. X-ray absorption fine structure spectra determine the increased electron vacancy in Pt SACs and indicate the Pt-N coordination in the as-prepared Pt SACs. Benefiting from the low-coordination environment and anchoring interaction between Pt atoms and nitrogen-doping sites from MOF-NC support, the Pt SACs deliver an enhanced activity and stability with 6.5 times higher mass activity than that of Pt nanoparticle catalysts in boosting the oxygen reduction reaction (ORR). Density functional theory calculations indicate that Pt single atoms prefer to be anchored by the pyridinic N-doped carbon sites. Importantly, it is revealed that the electronic structure of Pt SAs can be adjusted by adsorption of hydroxyl and oxygen, which greatly lowers free energy change for the rate-determining step and enhances the activity of Pt SACs toward the ORR.

Tracking the interaction of drug molecules with individual mesoporous amorphous calcium phosphate/ATP nanocomposites - an X-ray spectromicroscopy study.

Adenosine triphosphate (ATP) biomolecules play critial roles in the biomineralization process during the formation of amorphous calcium phosphate composites (ACPC), and ACPC is an important drug carrier due to its significant advantages of biocompatibility and biodegradability. Hence, studying the behavior of ACPC nanodrug carriers is crucial to investigate the structural regulation of biomimetic minerals and calcium phosphate (CaP)-based drug delivery systems. However, it is difficult to probe these interactions using traditional characterization methods. In this paper, XANES analysis together with STXM successfully provided a method to reveal the interaction of ATP and drug molecules with individual mesoporous ACPC. We found that the adenosine and phosphate groups of ATP biomolecules coordinated with Ca2+ and played critical roles in the formation of ACPC; drug molecules with the -COOH groups were linked to Ca2+via carboxylic acid groups primarily by electrostatic interactions, and the N-containing ring structures within the drug molecules also coordinated with Ca2+.

Size-Mediated Recurring Spinel Sub-nanodomains in Li- and Mn-Rich Layered Cathode Materials.

Li- and Mn-rich layered oxides are among the most promising cathode materials for Li-ion batteries with high theoretical energy density. Its practical application is, however, hampered by the capacity and voltage fade after long cycling. Herein, a finite difference method for near-edge structure (FDMNES) code was combined with in situ X-ray absorption spectroscopy (XAS) and transmission electron microscopy/electron energy loss spectroscopy (TEM/EELS) to investigate the evolution of transition metals (TMs) in fresh and heavily cycled electrodes. Theoretical modeling reveals a recurring partially reversible LiMn2 O4 -like sub-nanodomain formation/dissolution process during each charge/discharge, which accumulates gradually and accounts for the Mn phase transition. From the modeling of spectra and maps of the valence state over large regions of the cathodes, it was found that the phase change is size-dependent. After prolonged cycling, the TMs displayed different levels of inactivity.

A Comprehensive Investigation of a Zwitterionic GeI Dimer with a 1,2-Dicationic Core.

The reductive dehalogenation of a zwitterionic GeII species to make a zwitterionic GeI dimer with a 1,2-dicationic core is reported herein. To the root of the stability of this compound, the molecular and electronic structures were comprehensively characterized and investigated using crystallographic, spectroscopic, and computational methods. It was determined that the Ge centers are attracted because they are both electron-rich and positively charged. A comparison to the electronic structure in triphosphenium cations revealed varying degrees of covalent bonding and that this difference can be distinguished spectroscopically.

X-ray Absorption Near-Edge Structure Spectroscopy of a Stable 6-Oxoverdazyl Radical and Its Diamagnetic Precursor.

The electronic structure of 1,3,5-triphenyl-6-oxoverdazyl, a heteroatom-rich stable organic radical, and its diamagnetic 1,3,5-triphenyl-6-oxotetrazane precursor are probed using X-ray absorption near-edge structure (XANES) spectroscopy. The N K-edge XANES spectra of the 6-oxoverdazyl radical contain strong N 1s → π* resonances for each set of equivalent nitrogen atoms. The fact that these resonances are absent from the analogous spectra of the 6-oxotetrazane, whereas the O K-edge and C K-edge XANES spectra of both species are very similar, demonstrates that the unpaired electron of the radical is localized primarily on the N atoms of the 6-oxoverdazyl heterocycle. The O K-edge XANES spectra of both species contain strong O 1s → π* (C═O) peaks, but the peak of the radical is red-shifted by 0.5 eV relative to that of the 6-oxotetrazane, which indicates that the C═O bond in the radical is part of a larger π-conjugated system. The proposed interpretations of the XANES spectra are aided by density-functional calculations.