RESUMEN
Photodynamic therapy (PDT), which relies on the production of reactive oxygen species (ROS) induced by a photosensitizer to kill cancer cells, has become a non-invasive approach to combat cancer. However, the conventional aggregation-caused quenching effect, as well as the low ROS generation ability of photosensitizers, restrict their biological applications. In this work, a new Ir(III) complex with a dendritic ligand has been strategically designed and synthesized by ingenious modification of the ancillary ligand of a reported Ir(III) complex (Ir-1). The extended π-conjugation and multiple aromatic donor moieties endow the resulting complex Ir-2 with obvious aggregation-induced emission (AIE) activity and bathochromic emission. In in vitro experiments, importantly, Ir-2 nanoparticles exhibit the excellent photoinduced ROS generation capabilities of O2 â¢- and 1 O2 , as well as excellent biocompatibility and the lipid droplets (LDs) targeting feature. This study would provide useful guidance to design efficient Ir(III)-based photosensitizers used in biological applications in the future.
RESUMEN
The prominent pathological feature of fatty liver disease lesions is excessive fat accumulation in lipid droplets in hepatocytes. Thus, developing fluorescent lipid droplet-specific probes with high permeability and a high imaging contrast provides a robust tool for diagnosing fatty liver diseases. Herein, we rationally developed a novel donor-acceptor lipophilic fluorescent probe ANI with high photostability for wash-free visualization of lipid droplets and fatty liver disease characteristics. ANI showed a typical twisted intramolecular charge transfer effect with very faint fluorescence in high-polar solvents, but dramatically boosted emissions in low-polar environments. The solvatochromic probe can selectively light up lipid droplets with a high contrast in a wash-free manner. Further use of ANI to reveal the excessive accumulation of lipid droplets with a significantly large size in the liver tissues from the fatty liver disease model mice was successfully demonstrated. The remarkable imaging performances rendered ANI an alternative tool for accurately evaluating fatty liver disease in intraoperative diagnosis.
Asunto(s)
Hígado Graso , Gotas Lipídicas , Animales , Hígado Graso/diagnóstico por imagen , Colorantes Fluorescentes , Ratones , Microscopía FluorescenteRESUMEN
Nondoped organic light-emitting diodes (OLEDs) are of paramount importance for display and lighting applications owing to their advantages of facile fabrication and outstanding stability. However, nondoped OLEDs achieving extraordinary electroluminescence (EL) performance and low turn-on voltage (Von) remain sparse. Here, three Ir(III) complexes featuring N-heterocyclic carbene (NHC) auxiliary ligands functionalized with electron-deficient aromatic sulfonyl or phosphine oxide groups are reported as promising emitters for nondoped OLEDs. All Ir(III) complexes exhibit green emission with relatively high neat film efficiency. Although the photoluminescence spectra of three complexes reveal similarities, there are distinct differences in the nondoped EL performance. The nondoped device N3 based on tBu-Ir-ISO displays the most eminent EL performances and presents a low Von of 2.1 V, a power efficiency of 30.7 lm W-1, and a maximum current efficiency of 27.0 cd A-1, which can be attributed to steric hindrance and balanced carrier-transporting ability induced by electron-deficient substituents. Moreover, doped devices D1-D3 also realize excellent EL performance. It is believed that the strategy reported herein is a simple and efficient way of constructing excellent Ir(III) complexes for nondoped phosphorescent OLEDs.
RESUMEN
Constructing high-quality white organic light-emitting diodes (WOLEDs) remains a big challenge because of high demands on the electroluminescence (EL) performance including high efficiency, excellent spectral stability, and low roll-off simultaneously. To achieve effective energy transfer and trap-assisted recombination in the emissive layer, herein, four Ir(III) phosphors, namely, mOMe-Ir-PI (1), pOMe-Ir-PI (2), mOMe-Ir-PB (3), and pOMe-Ir-PB (4), were strategically designed via simple regulation of the substituent moiety and π conjugation of the chelated ligands. Their photophysical and EL properties were systematically investigated. When these phosphors are employed as doped emitters, the monochromic green organic light-emitting diodes not only exhibit a superior performance with the characteristics of 50.2 cd A-1, 39.2 lm W-1, and 15.1%, but also maintain a negligible roll-off ratio of 0.2% at 1000 cd m-2, which are better than those of commercial green Ir(ppy)2acac and Ir(ppy)3 in the same device configuration. Inspired by these outstanding performances, we successfully fabricated the warm WOLED utilizing 2 as a green component, affording a peak efficiency of 42.0 cd A-1, 29.3 lm W-1, and 18.6% and retaining at 39.9 cd A-1, 23.7 lm W-1, and 17.4% even at 1000 cd m-2. The results herein demonstrate the superiority of the molecular design and propose a simple method toward the development of promising Ir(III) phosphors for high-efficiency WOLEDs.
RESUMEN
The design of efficient and inexpensive photocatalysts for CO2 photoreduction under visible light is of great significance for the sustainable development of the entire society. Herein, a copper-based metal-organic framework (MOF) (CUST-804) using a bulky tetraphenylethylene-tetrazole linker is synthesized and successfully used as a photocatalyst for CO2 reduction. The structural characterizations, as well as the photophysical properties, are investigated systematically. In the heterogeneous catalytic system, CUST-804 exhibits a robust CO production activity up to 2.71 mmol g-1 h-1 with excellent recyclability along with a selectivity of 82.8%, which is comparable with those of the reported copper-based MOF system. Theoretical calculations demonstrated that, among three kinds of coordinated model, only the 5-coordinated Cu site is active for CO2 reduction, in which the *COOH intermediate is stabilized and CO is readily desorbed. The results obtained herein can provide fresh insights into the realization of efficient copper-functionalized crystalline photocatalysts for CO2 reduction.
RESUMEN
AIE polymers have been extensively researched in the fields of OLEDs, sensing, and cancer treatment since its first report in 2003, which have achieved numerous breakthroughs during the years. In comparison with small molecules, it can simultaneously combine the unique advantages of AIE materials and the polymer itself, to further enhance their corresponding photophysical performances. In this review, we enumerate and discuss the common construction strategies of AIE-active polymers and summarize the progress of research on polymerization enhancing luminescence, photosensitization, and room-temperature phosphorescence (RTP) with their related applications in chemo/bio-sensing and therapy. To conclude, we also discuss current challenges and prospects of the field for future development.
Asunto(s)
Colorantes Fluorescentes , Luminiscencia , Polimerizacion , PolímerosRESUMEN
Ultralong organic phosphorescence (UOP) materials glow persistently in the dark, which offers new exciting possibilities in the fields of anti-counterfeiting, photoelectric devices and biological imaging. However, the development of single-component UOP materials remains a great challenge. Herein, we develop a single component organic supramolecular zipper system with a lifetime up to 0.77â s. Owing to the introduction of a pyrazole ring into the diphenylsulfone group, the "V" shaped molecules were artfully self-assembled into supramolecular zippers via π-π and C-Hâ â â π interactions, that is not only of significance in highly efficient generation of triplet excitons but also facilitates a Dexter energy transfer process within supramolecular zippers, that are responsible for alleviating radiative and non-radiative deactivation decay of triplet excitons, to finally boost the UOP. This finding not only gives a new set of guidelines for the design of single-component UOP molecules but also reveals the UOP mechanism from a new perspective.
RESUMEN
Mechanochromic luminescent (MCL) materials are promising in pressure sensors, security papers, photoelectric devices and optical data recording. Although some kinds of MCL-active iridium(III) complexes with various soft substituent functional ligands (e.g., dendritic carbazole, flexible chains, and Schiff base ligands) were reported, the MCL mechanism is still not clear and mainly ascribes to the physical phase transformations from crystalline state to amorphous state in response to force stimulus at present stage, and deserves further study in order to obtain more intelligent MCL materials. Herein, two new iridium(III) complex isomers are tactfully constructed and show distinctly opposite MCL properties in spite of the same physical phase transformations happening on them. The absolutely out of the ordinary MCL mechanism has been presented on account of molecular level for the first time via the comparative study of photophysical properties based on isomers 1 and 2 with the help of crystal structure analysis, room/low temperature emission spectra, NMR, PXRD, and TD-DFT calculations. All of these results suggest that the emitting state dominated by the triplet charge transfer excited state (3CT) plays a key role in achieving mechanochromic luminescence in iridium(III) complex systems.
RESUMEN
The mercury ions in waste water have threatened public health and environmental protection. In this sense, novel materials with outstanding performances for removal of Hg2+ are imperative. Herein, we demonstrate a thiol-functionalized zirconium metal-organic cage (MOC-(SH)2) with excellent dispersion displays ideal properties for Hg2+ capture. MOC-(SH)2 exhibits the ability of removing Hg2+ in aqueous solutions with a capacity of 335.9 mgHg2+/gMOC-(SH)2, which surpasses that of classical Zr-based metal-organic framework Uio-66-(SH)2 by 1.89 folds. The higher loading capacity of MOC-(SH)2 is probably owing to the excellent dispersion of the discrete cage, which makes the accessibility of binding sites (thiol) easier. Additionally, 99.6% of Hg2+ can be effectively captured by MOC-(SH)2 with the concentration decreased from 5 to 0.02 ppm reaching the permissible limit for Hg2+, outperforming the performance of Uio-66-(SH)2. The excellent absorption property of MOC-(SH)2 is also achieved in terms of superior selectivity under the presence of competitive metal ions. Meanwhile, the regenerated MOC-(SH)2 can be reused without apparent loss of Hg2+ loading capacity. UV-vis absorption spectra, IR spectra and emission spectra further verified the strong chemical affinity between Hg2+ and the thiol of MOC-(SH)2. The study lays the groundwork for using Zr-MOCs in the removal of toxic metal ions and environmental sustainability.
RESUMEN
Supramolecular macrocyclic hosts have long been used in smart materials. However, their triplet emission and regulation at crystal level is rarely studied. Herein, ultralong and universal room-temperature phosphorescence (RTP) is reported for traditional crown ethers. A supramolecular strategy involving chain length adjustment and morphological locking through complexation with K+ was explored as a general method to tune the phosphorescence lifetime in the solid state. A maximum 10-fold increase of lifetime after complex formation accompanied with by invisible to visible phosphorescence was achieved. A deep encryption based on this activated RTP strategy was also facilely fabricated. This work thus opens a new world for supramolecular macrocycles and their intrinsic guest responsiveness offers a new avenue for versatile smart luminescent materials.
RESUMEN
Recently, solution-processable PhOLEDs have been attracting great interest for their low cost and high productivity relative to the vacuum-deposited devices. Similar to vacuum-deposited OLEDs, however, they usually suffer from serious efficiency roll-offs, especially in high brightness. Finding a feasible way and/or designing novel materials to increase efficiencies and reduce roll-offs simultaneously are highly desired. Herein, a new family of solution-processable cyclometalated iridium(III) phosphors with carbazole (Cz) and/or diphenylphosphoryl (Ph2PO) units functionalized main ligands has been designed. Owing to Cz and Ph2PO moieties possessing bulky steric effects, they can suppress the intermolecular strong packing and then decrease TTA effects and emission quenching. Meanwhile, the resulting OLEDs based on the designed phosphors exhibit considerable efficiencies and relatively small efficiency roll-offs. The device based on 4 containing both Cz and Ph2PO units realized a maximum current efficiency of 21.3 cd A-1, accompanied by a small roll-off. By optimization of the configuration of OLEDs, the device performance can be further enhanced, demonstrating their potential for high-performance solution-processable PhOLEDs.
RESUMEN
The efficient utilization of energy dissipating from non-radiative excited-state decay of fluorophores was only rarely reported. Herein, we demonstrate how to boost the energy generation of non-radiative decay and use it for cancer theranostics. A novel compound (TFM) was synthesized which possesses a rotor-like twisted structure, strong absorption in the far red/near-infrared region, and it shows aggregation-induced emission (AIE). Molecular dynamics simulations reveal that the TFM aggregate is in an amorphous form consisting of disordered molecules in a loose packing state, which allows efficient intramolecular motions, and consequently elevates energy dissipation from the pathway of thermal deactivation. These intrinsic features enable TFM nanoparticles (NPs) to display a high photothermal conversion efficiency (51.2 %), an excellent photoacoustic (PA) effect, and effective reactive oxygen species (ROS) generation. Inâ vivo evaluation shows that the TFM NPs are excellent candidates for PA imaging-guided phototherapy.
Asunto(s)
Terapia Combinada/métodos , Nanopartículas/química , Nanomedicina Teranóstica/métodos , HumanosRESUMEN
Heterocyclic polymers have gained enormous attention for their unique functionalities and wide applications. In contrast with the well-studied polymer systems with five- or six-membered heterocycles, functional polymers with readily openable small-ring heterocycles have rarely been explored due to their large synthetic difficulty. Herein, a facile one-pot multicomponent polymerization to such polymers is developed. A series of functional polymers with multisubstituted and heteroatom-rich azetidine frameworks are efficiently generated at room temperature in high atom economy from handy monomers. The four-membered azetidine rings in the polymer skeletons can be easily transformed into amide and amidine moieties via a fast and efficient acid-mediated ring-opening reaction, producing brand-new polymeric materials with distinctive properties. All the as-prepared azetidine-containing polymers exhibit intrinsic visible luminescence in the solid state under long-wavelength UV irradiation even without conventionally conjugated structures. Such unconventional luminescence is attributed to the clusteroluminogens formed by through-space electronic interactions of heteroatoms and phenyl rings. All the obtained polymers show excellent optical transparency, high and tunable refractive indices, low optical dispersions and good photopatternability, which make them promising materials in various advanced electronic and optoelectronic devices. The ring-opened polymers can also function as a lysosome-specific fluorescent probe in biological imaging.
RESUMEN
To develop B-O complementary-color white organic light-emitting diodes (WOLEDs) exhibiting high efficiency and low roll-off as well as color stability simultaneously, we have designed two orange iridium(III) complexes by simply controlling the position of the methoxyl group on the cyclometalated ligand. The obtained emitters mOMe-Ir-BQ and pOMe-Ir-BQ show good photophysical and electrochemical stabilities with a broadened full width at half-maximum close to 100 nm. The corresponding devices realize highly efficient electrophosphorescence with a maximum current efficiency (CE) and power efficiency (PE) of 24.4 cd A-1 and 15.3 lm W-1 at a high doping concentration of 15 wt %. Furthermore, the complementary-color all-phosphor WOLEDs based on these phosphors exhibit good performance with a maximum CE of 31.8 cd A-1, PE of 25.0 lm W-1, and external quantum efficiency of 15.5%. Particularly, the efficiency of this device is still as high as 29.3 cd A-1 and 14.2% at the practical brightness level of 1000 cd m-2, giving a small roll-off. Meanwhile, extremely high color stability is achieved by these devices with insignificant chromaticity variation.
RESUMEN
The mechanism of thermally activated delayed fluorescence (TADF) in molecules in aggregated or condensed solid states has been rarely studied and is not well understood. Nevertheless, many applications of TADF emitters are strongly affected by their luminescence properties in the aggregated state. In this study, two new isomeric tetradentate CuI complexes which simultaneously show aggregation induced emission (AIE) and TADF characteristics are reported for the first time. We provide direct evidence that effectively restricting the vibrations of individual molecules is a key requisite for TADF in these two CuI complexes through in-depth photophysical measurements combined with kinetic methods, single crystal analysis and theoretical calculations. These findings should stimulate new molecular engineering endeavours in the design of AIE-TADF active materials with highly emissive aggregated states.
RESUMEN
Nondoped electroluminescent devices offer advantages over their doped counterparts such as good reproducibility, reduced phase separation between host and guest materials, and potential of lower-cost devices. However, low luminance efficiencies and significant roll-off values are longstanding issues for nondoped devices, and a rational design strategy for the preparation of efficient phosphors is highly desired. In this work, cyclometalated Ir(III) complexes 3CzIr(mtpy), 4CzIr(mtpy), 3POIr(mtpy), and 4POIr(mtpy) bearing carbazole (Cz) or diphenylphosphoryl (Ph2PO) groups substituted at different positions of 1,2-diphenyl-H-benzimidazole (HPBI) were designed and synthesized. Owing to the steric effects induced by these groups, a significant intermolecular interaction was avoided, thereby reducing self-quenching and triplet-triplet annihilation (TTA) at high brightness. Simultaneously, attached functional moieties manipulate the charge-carrier character and enhance the EL performance of the complexes. Device N3-10, based on 3POIr(mtpy), successfully realized excellent performance and improved efficiency stability, rendering a turn-on voltage of 2.5 V, a maximum current efficiency of 29.7 cd A-1, and a maximum power efficiency of 31.1 lm W-1, which are all almost 3-fold higher than that of the control device N-10 based on parent complex. Inspiringly, all of the devices showed reduced efficiency roll-off as luminance increased. To the best of our knowledge, these are good results for green-emitting PHOLEDs using vacuum evaporation techniques, and they provide fundamental insights into the future realization of efficient phosphorescent Ir(III) complexes and corresponding nondoped devices.
RESUMEN
Correction for 'Theoretical study and design of multifunctional phosphorescent platinum(ii) complexes containing triarylboron moieties for efficient OLED emitters' by Yong Wu et al., Phys. Chem. Chem. Phys., 2015, DOI: .
RESUMEN
The geometries, electronic structures, photophysical properties and spin-orbit coupling (SOC) effects in the radiative process for the recently synthesized complexes (Bppy)Pt(acac) (1) and (BNppy)Pt(acac) (2) as well as the designed complexes 3-6 were investigated by DFT and TD-DFT calculations, to reveal the influences of the functional ligands on charge injection ability and phosphorescence efficiency of emitters. It is found that compared with electron acceptor complex 1, complexes 2-6 have lower ionization potentials and comparable high electronic affinities, which are suited for bipolar luminescent materials. The results also demonstrated that Bppy complexes 1, 5 and 6 have more (3)MLCT compositions in T1 emitting states compared with BNppy complexes 2-4, which results in strong SOC and fast kr. Thus, the phosphorescence efficiency of 1 is higher than that of 2. In addition, 5 and 6 have the balanced charge transport and better hole injection ability when the hole-transporting ligand is incorporated to 1. Therefore, 5 and 6 can server as promising candidates for efficient multifunctional phosphorescent OLED emitters owing to their ambipolar characters, balanced charge carrier injection/transport features and high phosphorescence quantum efficiency.
RESUMEN
An electrochemical sensor based on porous aromatic cages was reported, which can achieve chiral sensing of DOPA enantiomers. The prepared sensor can achieve a recognition efficiency of up to 2.6 for DOPA enantiomers. The enhanced recognition efficiency could be attributed to the cooperation of intermolecular interactions, and the efficient charge transfer process.
RESUMEN
Photodynamic therapy as a burgeoning and non-invasive theranostic technique has drawn great attention in the field of antibacterial treatment but often encounters undesired phototoxicity of photosensitizers during systemic circulation. Herein, a supramolecular substitution strategy is proposed for phototherapy of drug-resistant bacteria and skin flap repair by using macrocyclic p-sulfonatocalix(4)arene (SC4A) as a host, and two cationic aggregation-induced emission luminogens (AIEgens), namely TPE-QAS and TPE-2QAS, bearing quaternary ammonium group(s) as guests. Through host-guest assembly, the obtained complex exhibits obvious blue fluorescence in the solution due to the restriction of free motion of AIEgens and drastically inhibits efficient type I ROS generation. Then, upon the addition of another guest 4,4'-benzidine dihydrochloride, TPE-QAS can be competitively replaced from the cavity of SC4A to restore its pristine ROS efficiency and photoactivity in aqueous solution. The dissociative TPE-QAS shows a high bacterial binding ability with an efficient treatment for methicillin-resistant Staphylococcus aureus (MRSA) in dark and light irradiation. Meanwhile, it also exhibits an improved survival rate for MRSA-infected skin flap transplantation and largely accelerates the healing process. Thus, such cascaded host-guest assembly is an ideal platform for phototheranostics research.