RESUMEN
Agrochemicals are widely used in agricultural production, but they may cause agrochemicals residues and environmental pollution. Polysaccharide-based materials have emerged as a promising biopolymer carrier for agrochemicals delivery. Herein, an eco-friendly, photo-responsive supramolecular polysaccharide hybrid hydrogels (HA-AAP-Guano-CD@LP) was constructed from arylazopyrazole-modified hyaluronic acid (HA-AAP), guanidinium functionalized ß-cyclodextrin (Guano-CD), and laponite clay (LP) via synergistic host-guest and electrostatic interactions, which could realize the controlled release of plant growth regulators such as naphthalene acetic acid (NAA) and gibberellin (GA) and promote the growth of Chinese cabbage and alfalfa. More interestingly, after releasing the cargo, the hydrogels could be used to capture heavy metal ions via strong complexation between the ions and carboxyl groups. This polysaccharide-based supramolecular hybrid hydrogels may provide a new strategy to realize the precision agriculture by the controlled delivery of plant growth regulators and synergetic adsorption of pollutants.
Asunto(s)
Hidrogeles , Metales Pesados , Hidrogeles/química , Ácido Hialurónico/química , Adsorción , Reguladores del Crecimiento de las Plantas , IonesRESUMEN
In order to actively promote green production and address these concerns, there is an urgent need for new packaging materials to replace traditional plastic products. Starch-based packaging materials, composed of starch, fiber, and plasticizers, offer a degradable and environmentally friendly alternative. However, there are challenges related to the high crystallinity and poor compatibility between thermoplastic starch and fibers, resulting in decreased mechanical properties. To address these challenges, a novel approach combining plasticizer optimization and response surface method (RSM) optimization has been proposed to enhance the mechanical properties of starch-based packaging materials. This method leverages the advantages of composite plasticizers and process parameters. Scanning electron microscopy and X-ray crystallography results demonstrate that the composite plasticizer effectively disrupts the hydrogen bonding and granule morphology of starch, leading to a significant reduction in crystallinity. Fourier transform infrared spectroscopy results show that an addition of glycerol and D-fructose to the starch can form new hydrogen bonds between them, resulting in an enhanced plasticizing effect. The optimal process parameters are determined using the RSM, resulting in a forming temperature of 198 °C, a forming time of 5.4 min, and an AC content of 0.84 g. Compared with the non-optimized values, the tensile strength increases by 12.2% and the rebound rate increases by 8.1%.
RESUMEN
Zeolitic imidazolate framework-8 (ZIF-8) was evenly loaded on the surface of TiO2 doped with KI, using a solvent synthesis method, in order to produce a ZIF-8@TiO2 (KI) adsorption photocatalyst with good adsorption and photocatalytic properties. The samples were characterized by XRD, SEM, EDX, XPS, BET and UV-Vis. The photocatalytic efficiency of the material was obtained by photocatalytic tests. The results indicate that the doping with I inhibited the grain growth and reduced the crystallite size of TiO2, reduced the band gap width and improved the utilization rate for light. TiO2 (KI) was a single crystal of anatase titanium dioxide. The combination of ZIF-8 and TiO2 (KI) improved the specific surface area and increased the reaction site. The ZIF-8@TiO2 (KI) for Congo red was investigated to validate its photocatalytic performance. The optimal concentration of Congo red solution was 30 mg/L, and the amount of catalyst was proportional to the degradation efficiency. The degradation efficiency of ZIF-8@TiO2 (5%KI) was 76.42%, after being recycled four times.
RESUMEN
The emergence of antibiotic-resistant "superbugs" in recent decades has led to widespread illness and death and is a major ongoing public health issue. Since traditional antimicrobials and antibiotics are in many cases showing limited or no effectiveness in fighting some emerging pathogens, there is an urgent need to develop and explore novel antibacterial agents that are both powerful and reliable. Combining two or more antibiotics or antimicrobials has become a hot topic in antibacterial research. In this contribution, we report on using a simple electrospinning technique to create an N-halamine/graphene oxide-modified polymer membrane with excellent antibacterial activity. With the assistance of advanced techniques, the as-obtained membrane was characterized in terms of its chemical composition, morphology, size, and the presence of active chlorine. Its antibacterial properties were tested with Escherichia coli (E. coli) as the model bacteria, using the colony-counting method. Interestingly, the final N-halamine/graphene oxide-based antibacterial fibrous membrane inactivated E. coli both on contact and by releasing active chlorine. We believe that the synergistic antimicrobial action of our as-fabricated fibrous membrane should have great potential for utilization in water disinfection, air purification, medical and healthcare products, textile products, and other antibacterial-associated fields.
RESUMEN
Zeolitic imidazolate framework-8 (ZIF-8) was doped with a rare-earth metal, Eu, using a solvent synthesis method evenly on the surface of a mixed-crystal TiO2(Mc-TiO2) structure in order to produce a core-shell structure composite ZIF-8(Eu)@Mc-TiO2 adsorption photocatalyst with good adsorption and photocatalytic properties. The characterisation of ZIF-8(Eu)@Mc-TiO2 was performed via X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), Brunauer-Emmett-Teller analysis (BET) and ultraviolet-visible light differential reflectance spectroscopy (UV-DRs). The results indicated that Eu-doped ZIF-8 was formed evenly on the Mc-TiO2 surface, a core-shell structure formed and the light-response range was enhanced greatly. The ZIF-8(Eu)@Mc-TiO2 for basic fuchsin was investigated to validate its photocatalytic performance. The effect of the Eu doping amount, basic fuchsin concentration and photocatalyst dosage on the photocatalytic efficiency were investigated. The results revealed that, when 5%-Eu-doped ZIF-8(Eu)@Mc-TiO2 (20 mg) was combined with 30 mg/L basic fuchsin (100 mL) under UV irradiation for 1 h, the photocatalytic efficiency could reach 99%. Further, it exhibited a good recycling performance. Thus, it shows certain advantages in its degradation rate and repeatability compared with previously reported materials. All of these factors suggested that, in an aqueous medium, ZIF-8(Eu)@Mc-TiO2 is an eco-friendly, sustainable and efficient material for the photocatalytic degradation of basic fuchsin.
RESUMEN
A novel enzyme-responsive supramolecular polysaccharide assembly composed of disulfide linked adamantane-naphthalimide fluorescent camptothecin prodrug (AdaCPT) and ß-CD modified hyaluronic acid (HACD) was constructed, possessing low cellular cytotoxicity and exhibiting targeted cellular imaging and controlled drug release at specific sites while providing a concurrent means for the real-time tracking of drug delivery.
Asunto(s)
Antineoplásicos/farmacología , Camptotecina/farmacología , Portadores de Fármacos/química , Colorantes Fluorescentes/farmacología , Profármacos/farmacología , Adamantano/análogos & derivados , Adamantano/síntesis química , Adamantano/farmacología , Adamantano/toxicidad , Animales , Antineoplásicos/síntesis química , Antineoplásicos/toxicidad , Camptotecina/síntesis química , Camptotecina/toxicidad , Liberación de Fármacos , Colorantes Fluorescentes/síntesis química , Colorantes Fluorescentes/toxicidad , Células HCT116 , Humanos , Ácido Hialurónico/química , Ratones , Microscopía Confocal/métodos , Microscopía Fluorescente/métodos , Células 3T3 NIH , Naftalimidas/síntesis química , Naftalimidas/farmacología , Naftalimidas/toxicidad , Profármacos/síntesis química , Profármacos/toxicidad , beta-Ciclodextrinas/químicaRESUMEN
In this contribution, we report for the first time on a new strategy for developing sesbania gum-supported hydrophilic fibers containing nanosilver using electrospinning (SG-Ag/PAN electrospun fibers), which gives the fibers superior antibacterial activity. Employing a series of advanced technologies-scanning electron microscopy, transmission electron microscopy, Fourier transform infrared spectroscopy, UV-visible absorption spectroscopy, X-ray photoelectron spectroscopy, and contact angle testing-we characterized the as-synthesized SG-Ag/PAN electrospun fibers in terms of morphology, size, surface state, chemical composition, and hydrophilicity. By adjusting the synthesis conditions, in particular the feed ratio of sesbania gum (SG) and polyacrylonitrile (PAN) to Ag nanoparticles (NPs), we regulated the morphology and size of the as-electrospun fibers. The fibers' antibacterial properties were examined using the colony-counting method with two model bacteria: Escherichia coli (a Gram-negative bacterium) and Staphylococcus aureus (a Gram-positive bacterium). Interestingly, compared to Ag/PAN and SG-PAN electrospun fibers, the final SG-Ag/PAN showed enhanced antibacterial activity towards both of the model bacteria due to the combination of antibacterial Ag NPs and hydrophilic SG, which enabled the fibers to have sufficient contact with the bacteria. We believe this strategy has great potential for applications in antibacterial-related fields.
RESUMEN
Microorganism pollution induced by pathogens has become a serious concern in recent years. In response, research on antibacterial N-halamines has made impressive progress in developing ways to combat this pollution. While synthetic polymer-based N-halamines have been widely developed and in some cases even commercialized, N-halamines based on naturally occurring polymers remain underexplored. In this contribution, we report for the first time on a strategy for developing sesbania gum (SG)-based polymeric N-halamines by a four-step approach Using SG as the initial polymer, we obtained SG-based polymeric N-halamines (abbreviated as cSG-PAN nanofibers) via a step-by-step controllable synthesis process. With the assistance of advanced techniques, the as-synthesized cSG-PAN nanofibers were systematically characterized in terms of their chemical composition and morphology. In a series of antibacterial and cytotoxicity evaluations, the as-obtained cSG-PAN nanofibers displayed good antibacterial activity against Escherichia coli and Staphylococcus aureus, as well as low cytotoxicity towards A549 cells. We believe this study offers a guide for developing naturally occurring polymer-based antibacterial N-halamines that have great potential for antibacterial applications.
RESUMEN
A multifunctional supramolecular assembly was successfully constructed by the host-guest complexation of doubly positively charged adamantane (ADA) with ß-CD-modified hexabenzocoronene and the π-stacking of coronene with mitoxantrone, which was characterized by transmission electron microscopy, scanning electron microscopy, dynamic light-scattering, and zeta potential experiments. Possessing a small size and rigid backbone coronene center, the water-soluble biocompatible supramolecular assembly has intracellular imaging abilities. Moreover, after the ester group of ADA was hydrolyzed into a carboxyl group, the positively charged quaternary amine strand converted into a zwitterion structure, which realized the controlled plasmid DNA binding and release. Besides, the cytotoxicity experiments showed that the supramolecular assembly possesses slightly lower toxicity and a slightly higher anticancer activity than free drug. We believe that this work might present a convenient method for synergetic cancer treatment.
RESUMEN
In this article, nanostructured superhydrophobic polymeric surfaces were fabricated by a simple (one-step) reproductive method of anodic aluminum oxide (AAO) template extrusion. By tuning the diameter of the AAO template and the pressure to extrude, high-density polyethylene (HDPE) nanofiber surfaces with different nanometer roughness were prepared, and various sliding angles (SAs) of drops on these surfaces were measured. The results of the impact of drops on the nanostructured HDPE surfaces indicated that SAs were very important for the dynamic wettability of superhydrophobic surfaces. The one-step AAO template extrusion method has the advantage of tailoring the SA values on polymeric surfaces. Therefore, we believe it to be a promising industrial basis for manufacturing functional materials in the fields of agriculture, electronics, and optics.
RESUMEN
The high dewetting abilities of lotus leaves can be transited to a complete wetting state by soaking the leaves in water at a depth of 50 cm for 2 h. However, after being dried by N2 gas, the high dewetting behavior of lotus leaves may be mostly restored. This indicates that experimental procedure might considerably affect the dewetting abilities of lotus leaves. To discover the mechanism underlying this interesting dewetting phenomena, the dewetting force was used to characterize the dewetting abilities of surfaces, and model studies to mimic the papillae were done. Surface hydrophobicity, sizes, rise angles, and secondary structures of the models' sides affected their dewetting force with water. So we suggested that the dewetting states, Cassie or Wenzel's state, of lotus surfaces depend much on the depth of water, i.e., the hydraulic pressure. On the other hand, the primary structures of papillae in Cassie's state led to a high receding angle with respect to the plane of the leaf during the dewetting measurement. The secondary structures and micro/nano arrays of papillae increased the dewetting abilities of lotus leaves, since no water intruded between papillae. However, the structures of papillae in Wenzle's state significantly reduced the dewetting abilities of lotus leaves after being soaked at a depth of 50 cm for 2 h. Therefore, as for novel designs of microdevices floating on water, including the use of the high dewetting properties of suphydrophobic materials, surface (primary or secondary) microstructure and external pressure, such as static hydraulic pressure, must be taken into account.
Asunto(s)
Lotus/química , Agua/química , Lotus/ultraestructura , Microscopía Electrónica de Rastreo , Hojas de la Planta/química , Hojas de la Planta/ultraestructura , Agua/análisis , HumectabilidadRESUMEN
In this article, a simple method of pressing a conical frustum into liquid was adopted to explore the ability to restrict flow around their edges. On the basis of experiments and theoretical analyses, the restricting force Deltaf and the pressing work DeltaE(w) were used to characterize the ability to restrict flow around the edge for water or formamide, which were found to be closely related to the geometric morphologies of edges and the liquid and material characteristics. The ability to restrict flow around the edge may be enhanced by increasing the rise angle omega and the size of edge circles and using a high-surface-energy liquid. Inspired by this, the superhydrophobicity of the materials with lower hydrophobicity has been successfully obtained by constructing close microedges on their flat surfaces. We believe that these findings would help to widen several novel applications to high-adhesion superhydrophobic surfaces.
RESUMEN
Titanium dioxide (TiO(2)) photoelectrodes with micro/nano hierarchical branched inner channels have been prepared by an electrohydrodynamic (EHD) technique and assembled to form dye-sensitized solar cells (DSSCs). Excellent penetration of ionic-liquid electrolytes and enhanced light harvesting in the longer wavelength region are realized within the composite-structure electrode, thus a better fill factor (ff) of 75.3 % and higher conversion efficiency (eta) of 7.1 % are obtained for viscous ionic-liquid electrolytes compared to pure nanostructured films. Hierarchical branched channels in the photoanodes can efficiently improve the transport properties of redox-active species in viscous electrolytes, which is demonstrated by electrical impedance spectroscopy (EIS). The incident monochromatic photon-to-electron conversion efficiency (IPCE) shows that enhanced light scattering in the composite film is of benefit for light harvesting and thus for solar energy conversion efficiency.
RESUMEN
A light-emitting poly (distyryldimethylbenzene-co-triethylene glycol) rod-coil block copolymer was used to fabricate films with three-dimensionally ordered honeycomb structures by the breath-figure method. Photocurrent generation and photovoltaic performance are studied, and the dependence of photocurrent on applied electric field is investigated. Introducing the ordered porous structure significantly improves the photoelectric conversion behavior, because porous structures not only enhance the light-harvesting efficiency but also benefit charge separation and charge transfer. This phenomenon may have great prospects for enhancing the photovoltaic behavior of organic thin-film devices.