RESUMEN
The chemical structure of excipients molecularly mixed in an amorphous solid dispersion (ASD) has a significant impact on properties of the ASD including dissolution behavior, physical stability, and bioavailability. Polymers used in ASDs require a balance between hydrophobic and hydrophilic functionalities to ensure rapid dissolution of the amorphous dispersion as well as sustained supersaturation of the drug in solution. This work demonstrates the use of postpolymerization functionalization of poly(vinylpyridine) excipients to elucidate the impact of polymer properties on the dissolution behavior of amorphous dispersions containing posaconazole. It was found that N-oxidation of pyridine functionalities increased the solubility of poly(vinylpyridine) derivatives in neutral aqueous conditions and allowed for nanoparticle formation which supplied posaconazole into solution at concentrations exceeding those achieved by more conventional excipients such as hydroxypropyl methylcellulose acetate succinate (HPMCAS) or Eudragit E PO. By leveraging these functional modifications of the parent poly(vinylpyridine) excipient to increase polymer hydrophilicity and minimize the effect of polymer on pH, a new polymeric excipient was optimized for rapid dissolution and supersaturation maintenance for a model compound.
Asunto(s)
Excipientes , Óxidos , Triazoles , Excipientes/química , Solubilidad , Polímeros/química , MetilcelulosaRESUMEN
Advances in photocontrolled polymerizations have expanded the scope of polymer architectures and structures that can be synthesized for various applications. The majority of these polymerizations have been developed for radical processes, which limits the diversity of monomers that can be used in macromolecular design. More recent developments of photocontrolled cationic polymerizations have taken a step toward addressing this limitation and have expanded the palette of monomers that can be used in stimuli-regulated polymerizations, enabling the synthesis of previously inaccessible polymeric structures. This Account will detail our group's studies on cationic polymerization processes where chain growth is regulated by light and highlight how these methods can be combined with other stimuli-controlled polymerizations to precisely dictate macromolecular structure.Photoinitiated cationic polymerizations are well-studied and important processes that have control over initiation. However, we wanted to develop systems where we had spatiotemporal control over both polymer initiation and chain growth. This additional command over the reaction provides the ability to manipulate the growing polymer with an external stimulus during a polymerization, which can be used to control structure. To achieve this goal, we set out to develop a method to photoreversibly generate a cation at a growing chain end that could participate in a controlled polymerization process. We took inspiration from previous work on cationic degenerate chain transfer polymerizations of vinyl ethers that used thiocarbonylthio chain transfer agents. These polymerizations were initiated by a strong acid and gave well-defined poly(vinyl ether)s. We posited that we could remove the acid initiator in these systems and reversibly oxidize the thiocarbonylthio chain ends in these reactions with a photocatalyst to give a photocontrolled cationic polymerization of vinyl ethers. This Account will focus on our journey to discover cationic photocontrolled polymerizations. We will summarize our initial developments and detail our mechanistic understanding of these reactions using both organic and inorganic based photocatalysts, and we will outline more recent efforts to expand cationic degenerate chain transfer polymerizations to other thioacetal initiators. Finally, we will detail how these photocontrolled cationic polymerizations can be used to switch monomer selectivity in situ using light to control polymer structure. At the end of the Account, we will discuss our vision for future potential applications of these photocontrolled cationic polymerizations in the synthesis of novel block copolymers and next generation cross-linked networks.
Asunto(s)
Éteres , Polímeros , Catálisis , Cationes/química , Polimerizacion , Polímeros/química , Compuestos de ViniloRESUMEN
Creation of strong and tough plastics from sustainable and biorenewable resources is a significant challenge in polymer science. This challenge is further complicated when attempting to make these materials using an economically viable process, which is often hindered by the production and availability of chemical feedstocks and the efficiency of the monomer synthesis. Herein, we report the synthesis and characterization of a strong thermoplastic made from 2,3-dihydrofuran (DHF), a monomer made in one step from 1,4-butanediol, a bioalcohol already produced on the plant scale. We developed a green, metal-free cationic polymerization to enable the production of poly(2,3-dihydrofuran) (PDHF) with molecular weights of up to 256 kg/mol at room temperature. Characterization of these polymers showed that PDHF possesses high tensile strength and toughness (70 and 14 MPa, respectively) comparable to commercial polycarbonate, high optical clarity, and good barrier properties to oxygen, carbon dioxide, and water. These properties make this material amenable to a variety of applications, from food packaging to high strength windows. Importantly, we have also developed a facile oxidative degradation process of PDHF, providing an end-of-life solution for PDHF materials.
Asunto(s)
Furanos , Polímeros , Cationes , Plásticos , Polimerizacion , Polímeros/química , TemperaturaRESUMEN
An air-tolerant nickel-catalyzed cyanation of aryl bromides is reported. The reaction uses a NiCl2/Xantphos catalyst in combination with substoichiometric quantities of zinc cyanide and polymethylhydrosiloxane. This silane is a green, homogeneous alternative to the traditional, insoluble solid reductant zinc and renders the reaction tolerant to air. The reaction can be performed under an air atmosphere, obviating the need for degassing, a glovebox, or Schlenk techniques. The reaction scope is broad, proceeding in good yields with a variety of (hetero)arenes.
Asunto(s)
Níquel , Sustancias Reductoras , Bromuros , Catálisis , SiloxanosRESUMEN
Over the past two and a half years, the COVID-19 pandemic severely disrupted almost all aspects of life as people throughout the world were instructed to work-from-home. Scientific researchers, whose work is reliant on access to laboratory equipment, have been acutely impacted by these global changes. In this study, we surveyed graduate students and postdocs in the chemical sciences at a selected number of academic institutions in the United States. We found that many survey participants, especially women, experienced severely diminished research progress and increased anxiety levels during the COVID-19 pandemic. Through factor analysis and multiple regression modeling, we found that during this challenging time participants who reported greater levels of professional support also reported greater research progress and lower levels of anxiety. We also found that, although advisors and departments provide some forms of professional support, there are other types of support that students and postdocs still desire. This phenomenon is magnified for female and underrepresented minority participants, as they need greater levels of professional support and place immense value on the quality of their work environments. Based on these results, we have identified some ways in which departments and advisors can provide the needed support for their graduate students and postdocs, thereby providing timeless advice that is applicable to improving academic work conditions not only during a global pandemic but also in a postpandemic world.
RESUMEN
The exploration of pyridine-imine (PI) iron complexes that exhibit redox noninnocence (RNI) led to several interesting discoveries. The reduction of (PI)FeX2 species afforded disproportionation products such as (dmpPI)2FeX (dmp = 2,6-Me2-C6H3, X = Cl, Br; 8-X) and (dippPI)2FeX (dipp = 2,6-iPr2-C6H3, X = Cl, Br; 9-X), which were independently prepared by reductions of (PI)FeX2 in the presence of PI. The crystal structure of 8-Br possessed an asymmetric unit with two distinct electromers, species with different electronic GSs: a low-spin (S = 1/2) configuration derived from an intermediate-spin S = 1 core antiferromagnetically (AF) coupled to an S = 1/2 PI ligand, and an S = 3/2 center resulting from a high-spin S = 2 core AF-coupled to an S = 1/2 PI ligand. Calculations were used to energetically compare plausible ground states. Polydentate diazepane-PI (DHPI) ligands were applied to the synthesis of monomeric dihalides (DHPI)FeX2 (X = Cl, 1-Cl2; X = Br, 1-Br2); reduction generated the highly distorted bioctahedral dimers (DHPA)2Fe2X2 ((3-X)2) containing a C-C bond formed from imine coupling; the monomers 1-X2 could be regenerated upon Ph3CX oxidation. Dihalides and their reduced counterparts were subjected to various alkyl halides and methyl methacrylate (MMA), generating polymers with little to no molecular weight control, indicative of simple radical-initiated polymerization.
RESUMEN
High-density polyethylene (HDPE) is utilized in a multitude of commercial products worldwide due to its broad spectrum of physical properties and low production costs. Molecular weight and dispersity (D) are known to affect the tensile and rheological properties of HDPE, but little is known about the influence of the molecular weight distribution (MWD) shape on these properties. In this work, we investigate this matter through the temporal regulation of initiation in a living coordination-insertion polymerization of ethylene. This method provides precise control over the MWD shape which, in turn, offers a systematic study on the influence of MWD shape on the physical properties of HDPE. Through rheological testing, we observe a difference in complex viscosity and shear thinning with opposite MWD skew. However, tensile testing reveals that the MWD skew does not impact the strain at break, signifying the ability to influence HDPE processing without compromising material strength.