RESUMEN
PURPOSE/OBJECTIVE(S): Surface-guided radiation therapy (SGRT) can track the patient surface noninvasively to complement radiographic image-guided radiation therapy with a standard 3-camera system and a single radiation/image isocenter. Here we report the commissioning of a novel SGRT system that monitors three imaging isocenters locations in a proton half-gantry room with a unique 5-camera configuration. MATERIALS/METHODS: The proton half-gantry room has three image isocenters, designated ISO-0, ISO-1, and ISO-2, to cover various anatomical sites via a robotic ceiling-mounted cone-beam CT. Although ISO-0 and ISO-1 are used to image the cranium, head and neck, and thoracic regions, ISO-2 is often used to image body and extremity sites and contiguous craniospinal target volumes. The five-camera system was calibrated to the radiographic isocenter by using a stereotactic radiosurgery cube phantom for each image isocenter. RESULTS: The performance of this 5-camera system was evaluated for 6 degrees of freedom in three categories: (1) absolute setup accuracy relative to the radiographic kV image isocenter based on the DICOM reference; (2) relative shift accuracy based on a reference surface capture; and (3) isocenter tracking accuracy from one isocenter to another based on a reference surface capture. The evaluation revealed maximum deviations of 0.8, 0.2, and 0.6 mm in translation and 0.2°, 0.1°, and 0.1° in rotation for the first, second, and third categories, respectively. Comparing the dosimetry and latency with static and gated irradiation revealed a 0.1% dose difference and positional differences of 0.8 mm in X and 0.9 mm in Y with less than 50 ms temporal accuracy. CONCLUSION: The unique 5-camera system configuration provides SGRT at the treatment isocenter (ISO-0) and also imaging isocenter locations (ISO-0, ISO-1, and ISO-2) to ensure correct patient positioning before and after radiographic imaging, especially during transitions from the offset imaging isocenters to the treatment isocenter.
Asunto(s)
Protones , Radioterapia Guiada por Imagen , Humanos , Fantasmas de Imagen , Radioterapia Guiada por Imagen/métodos , Tomografía Computarizada de Haz Cónico/métodos , Posicionamiento del PacienteRESUMEN
Purpose: To develop a novel, monthly quality assurance (QA) regimen for a proton therapy system that uses 2 custom phantoms, each housing a commercial scintillator detector and a charge-coupled device camera. The novel metrology system assessed QA trends at a pediatric proton therapy center from 2018 to 2022. Materials and Methods: The measurement system was designed to accommodate horizontal and vertical positioning of the commercial device and to enable gantry and couch isocentricity measurements (using a star shot procedure), proton spot profile verification, and imaging and radiation congruence tests to be performed simultaneously in the dual-phantom setup. Gantry angles and proton beam energies were varied and alternated each month, using gantry angles of 0°, 30°, 60°, 90°, 120°, 150°, and 180° and discrete beam energies of 69.4, 84.5, 100, 139.1, 180.4, 200.4, and 221.3 MeV after radiographic verification. A total of 1176 individual monthly QA measurements of gantry and couch isocentricity, spot size, and congruence were analyzed. Results: Gantry and couch star shot measurements showed beam isocentricities of 0.3 ± 0.2 mm and 0.2 ± 0.2 mm, respectively, which were within the threshold of 1.0 mm. Spot sizes for each discrete energy were within the threshold of ± 10% of the baseline values for all 3 proton rooms. The imaging and radiation coincidence test results for the 1176 individual monthly QA measurements were 0.5 mm for the 50th percentile and 1.2 mm (the clinical threshold) for the 97.6th percentile. Conclusions: Integrating a commercial device with custom phantoms improved the quality of proton system checks compared with previous methods using radiochromic films, loose ball bearings, and foam. The scheme of alternating beam angles with discrete energies in the monthly QA-enabled, clinically meaningful verification of beam energy and gantry angle combinations while the machine performance and accuracy were being checked.
RESUMEN
We introduce a custom-made silicone-filled vaginal spacer for use during treatment of female patients receiving pelvic proton radiation therapy. Commercially available vaginal dilators can be purchased as hollow objects; when filled with a media, they can act as a beam stopper and/or tissue spacer while pushing uninvolved vaginal wall away from a high-dose region. Dosimetric advantages of these specifically constructed silicone-filled vaginal spacers were investigated when compared to the unaltered commercially available product or no vaginal spacer in pediatric proton therapy.