Structure and Mechanical Properties of iPP-Based Nanocomposites Crystallized under High Pressure.

The unique nonparallel chain arrangement in the orthorhombic γ-form lamellae of isotactic polypropylene (iPP) results in the enhancement of the mechanical properties of γ-iPP. Our study aimed at the investigation of the mechanical properties of γ-iPP nanocomposites with 1-5 wt.% multiwall carbon nanotubes (MWCNT) and 5 wt.% organo-modified montmorillonite prepared by melt-mixing and high-pressure crystallization. Neat iPP and the nanocomposites were crystallized under high pressures of 200 MPa and 300 MPa, and for comparison under 1.4 MPa, in a custom-built high-pressure cell. The structure of the materials was studied using WAXS, SAXS, DSC, and SEM, whereas their mechanical properties were tested in plane-strain compression. Under a small pressure of 1.4 MPa, polymer matrix in all materials crystallized predominantly in the α-form, the most common monoclinic form of iPP, whereas under high pressure it crystallized in the γ-form. This caused a significant increase in the elastic modulus, yield stress, and stress at break. Moreover, due to the presence of MWCNT, these parameters of the nanocomposites exceeded those of the neat polymer. As a result, a 60-70% increase in the elastic modulus, yield stress, and stress at break was achieved by filling of iPP with MWCNT and high-pressure crystallization.

3D printing of dolutegravir-loaded polylactide filaments as a long-acting implantable system for HIV treatment.

3D printing was used to prepare implantable systems or tablets loaded with dolutegravir to explore their potential as long-acting implantables (LAIs). Our strategy relies on preparing a polylactide (PLA) filament loaded with the anti-HIV drug. Subsequently, 3D printing was performed under conditions that allowed the PLA to be simultaneously melted and the drug encapsulated within the printed strand. The dolutegravir release profiles indicated its sustained release for 47 days. Furthermore, neat and drug-loaded tablets were characterized by Fourier transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC), and thermogravimetric analysis (TGA), while their morphology was assessed by scanning electron microscopy (SEM). Finally, their biocompatibility was proved by MTT assay against ISO standards recommended L929 mouse and human Hs68 skin fibroblast cells. All the results indicated that the 3D printing of PLA-based tablets could produce customized medications with potential applications against HIV.

Microbiologically Pure Cotton Fabrics Treated with Tetrabutylammonium OXONE as Mild Disinfection Agent.

The microbiological purity of textiles plays a pivotal role in the use of textiles, especially in hospitals and other medical facilities. Microbiological purity of cotton fabric was achieved by a new disinfection method using tetrabutyloammonium OXONE (TBA-OXONE) before washing. As a result of the disinfection, the cotton fabric became microbiologically pure, despite the markedly decreased washing time with respect to the widely used standard procedure. Shortening of the washing time allowed for significant energy savings. In addition, the effect of the number of disinfection and washing cycles on the tensile properties and tearing force of the fabric was examined. After 120 disinfection and washing cycles the mechanical properties of cotton fabric were only slightly worsened.

Crystallization of Isotactic Polypropylene Nanocomposites with Fibrillated Poly(tetrafluoroethylene) under Elevated Pressure.

Nanocomposites of isotactic polypropylene with 1-5 wt.% of fibrillated PTFE (PP/T) were prepared, and their crystallization during cooling under elevated pressure, in a wide pressure range, up to 300 MPa, as well as the resulting structure, were examined. The crystallization peak temperatures of PP/T, especially with 3 and 5 wt.% of PTFE, exceeded by up to 13 °C those of neat PP. Moreover, a fine-grain structure was formed in PP/T in the entire pressure range, which proved the ability of the fibrillated PTFE to nucleate crystallization of PP in the γ-form under elevated pressure. This also resulted in a higher crystallinity level developed in the γ-domain, before the temperature range of the α-domain was reached during cooling. Hence, the γ-content increased in comparison to that in neat PP, under the pressure up to 200 MPa, especially under 50-100 MPa.

High-Pressure Crystallization of iPP Nucleated with 1,3:2,4-bis(3,4-dimethylbenzylidene)sorbitol.

1,3:2,4-bis(3,4-dimethylbenzylidene)sorbitol (DMDBS) is highly effective in nucleation of the α- form of isotactic polypropylene (iPP). However, its role in high-pressure crystallization of iPP, facilitating the formation of the γ- polymorph, has not been explored. The present paper focuses on the influence of DMDBS on nucleation of high-pressure crystallization of iPP. iPP with 0.2-1.0 wt.% of the DMDBS was crystallized under elevated pressure, up to 300 MPa, in various thermal conditions, and then analyzed by PLM, WAXD, SEM, and DSC. During cooling, crystallization temperatures (Tc) were determined. It was found that under high-pressure DMDBS nucleated crystallization of iPP in the orthorhombic γ- form. As a consequence, Tc and the γ- form content increased for the nucleated iPP, while the size of polycrystalline aggregates decreased, although the effects depended on DMDBS content. The significant increase of Tc and the decrease of grain size under high pressure of 200-300 MPa required higher content of DMDBS than the nucleation of the α-form under lower pressure, possibly due to the effect of pressure on crystallization of DMDBS itself, which is a prerequisite for its nucleating activity.

Hydrophilic Polyhedral Oligomeric Silsesquioxane, POSS(OH)32, as a Complexing Nanocarrier for Doxorubicin and Daunorubicin.

A novel strategy, recently developed by us, to use polyhedral oligomeric silsesquioxanes (POSS) as an anti-cancer drug carrier is presented. Anthracycline:POSS complexes were prepared by simple co-addition of doxorubicin (DOX) or daunorubicin (DAU) with hydrophilic POSS(OH)32. Co-delivery of POSS and anthracyclines led to higher anti-cancer activity towards HeLa (cervical cancer endothelial) and MCF-7 (human breast adenocarcinoma) cell lines. The obtained supramolecular hybrid complexes were characterised by nuclear magnetic resonance (NMR) spectroscopy (nuclear Overhauser effect spectroscopy [NOESY] and homonuclear correlation spectroscopy [COSY]), Fourier transform infrared spectroscopy (FTIR), and dynamic light scattering (DLS). The two-dimensional (2D) NOESY spectra of the complexes showed the cross-correlation peaks for hydroxyl groups of POSS (~4.3-4.8 ppm) with OH groups of DOX and DAU. FTIR showed that hydroxyl group of POSS can interact with amine and hydroxyl groups of DOX and DAU. The viability of HeLa and MCF-7 was analysed with the MTT assay to evaluate the cytotoxicity of free DOX and DAU and the relevant complexes with POSS at different molar ratios. At a low DOX concentration (2.5 µM), for molar ratios 1:1, 1:4, and 1:8 (POSS:DOX), the complexes showed two and three times higher cytotoxicity towards HeLa and MCF-7 cells, respectively, than DOX itself after both 24- and 48-h incubation. The 1 µM concentration for a 1:4 POSS:DOX molecular ratio and the 2.5 µM concentration for all complexes were more toxic towards MCF-7 cells than free DOX after 48-h incubation. In the case of POSS:DAU complexes, there was higher toxicity than that of free drug after 48-h incubation. It can be concluded that the formation of non-covalent complexes increases toxicity of anthracycline drugs towards Hela and MCF-7 cells. The novel complexes are inexpensive to prepare and more effective than free drugs at low systemic toxicity.

The role of nucleating agents in high-pressure-induced gamma crystallization in isotactic polypropylene.

Nucleation of the γ-form in isotactic polypropylene (PP) under high pressure was investigated. Three nucleating agents were used to nucleate crystallization of PP under atmospheric pressure: commercial Hyperform HPN-20E from Milliken Chemical, poly(tetrafluoroethylene) particles nucleating the α-form, and calcium pimelate nucleating the ß-form. Crystallization of neat PP and PP with addition of 0.2 wt% of the nucleating agents was studied. Specimens were either kept at 200 °C under pressure of 200 MPa for time ranging from 2 min to 4 h or for 15 min under pressure ranging from 1.3 to 300 MPa. After cooling to ambient temperature and releasing the pressure, the specimens were analyzed by DSC, WAXD, and PLM to have an insight into the structure and to determine a crystallinity level and contents of crystallographic forms. Both α-nucleating agents strongly nucleated crystallization of PP under high pressure in the γ-form, whereas the ß-nucleating agent had only a slight effect. The results show the possibility to use nucleating agents to nucleate the γ-form of PP under high pressure.

Fluorescence properties of 3-amino phenylboronic acid and its interaction with glucose and ZnS:Cu quantum dots.

Preliminary results of a study of the interaction between 3-amino phenylboronic acid and glucose or ZnS:Cu quantum dots are presented in this paper. ZnS:Cu quantum dots with mercaptopropionic acid as a capping agent were obtained and characterized. Quenching of 3-amino phenylboronic acid fluorescence was studied by steady-state and timeresolved measurements. For fluorescence quenching with glucose the results of steady-state measurements fulfill Stern-Volmer equation. The quenching constants are increasing with growing pH. The decay of fluorescence is monoexponential with lifetime about 8.4 ns, which does not depend on pH and glucose concentration indicating static quenching. The quenching constant can be interpreted as apparent equilibrium constant of estrification of boronic group with diol. Quantum dots are also quenching 3-amino phenylboronic acid fluorescence. Fluorescence lifetime, in this case, is slightly decreasing with increasing concentration of quantum dots. The quenching constants are increasing slightly with pH's growth. Quenching mechanism of 3-amino phenylboronic acid fluorescence by quantum dots needs further experiments to be fully explained.