RESUMEN
OBJECTIVE: The objectives of the study were to assess the survival, failure, and technical complication rates of implant-supported fixed dental prosthesis (iFDPs) with pontic or splinted crown (iSp C) designs in the posterior area and compare the influence of prosthetic materials and prosthetic design on the outcomes. METHODS: Electronic and manual searches were performed to identify randomized-, prospective-, and retrospective clinical trials with follow-up time of ≥12 months, evaluating the clinical outcomes of posterior iFDPs with pontic or iSp Cs. Survival and complication rates were analyzed using robust Poisson's regression models. RESULTS: Thirty-two studies reporting on 42 study arms were included in the present systematic review. The meta-analysis of the included studies indicated estimated 3-year survival rates of 98.3% (95%CI: 95.6-99.3%) for porcelain-fused-to-metal (PFM) iFDPs, 97.5% (95%CI: 95.5-98.7%) for veneered zirconia (Zr) iFDPs with pontic, 98.9% (95%CI: 96.8-99.6%) for monolithic or micro-veneered zirconia iFDPs with pontic, and 97.0% (95%CI: 84.8-99.9%) for lithium disilicate iFDPs with pontics. The survival rates for different material combination showed no statistically significant differences. Veneered restorations, overall, showed significantly (p < .01) higher ceramic fracture and chipping rates compared with monolithic restorations. Furthermore, there was no significant difference in survival rates (98.3% [95%CI: 95.6-99.3%] vs. 99.1% [95%CI: 97.6-99.7%]) and overall complication rates between PFM iFDPs with pontic and PFM iSp Cs. CONCLUSIONS: Based on the data identified by this systematic review, PFM, veneered Zr, and monolithic Zr iFDPs with pontic and iSp Cs showed similarly high short-term survival rates in the posterior area. Veneered restorations exhibit ceramic chipping more often than monolithic restorations, with the highest fracture rate reported for veneered Zr iFDPs.
Asunto(s)
Diseño de Prótesis Dental , Fracaso de la Restauración Dental , Estudios Prospectivos , Estudios Retrospectivos , Porcelana Dental , Cerámica , Circonio , Coronas , Prótesis Dental de Soporte ImplantadoRESUMEN
OBJECTIVES: To assess clinical, radiological and esthetic outcomes of restorations supported by root-analogue implants (RAIs) or roots of severely damaged teeth after forced orthodontic extrusion (FOE). MATERIALS AND METHODS: Clinical data regarding milled one-piece (titanium/zirconia roots and zirconia abutments) RAIs (REPLICATE™ System) and FOE were recorded and retrospectively evaluated for 40 patients by two investigators. Strict inclusion and exclusion criteria were applied. Functional and esthetic outcomes were assessed for n = 20 pre-molars and n = 20 anterior teeth via comparison of radiographic and digital images applying the novel Functional Implant Prosthodontic Score (FIPS). Krippendorff's alpha coefficient was calculated to assess inter-rater reliability. Mann-Whitney-U-Test was used to compare the assessed parameters. Level of significance was set to p < 0.05. RESULTS: After a mean observation period of 18.4 ± 5.7 months for restorations supported by RAIs and 43.9 ± 16.4 months for restorations after FOE, mean FIPS scores were 9.2/8.8 ± 1.1/1.2 (RAIs) and 7.4/7.7 ± 1.3/1.5 (FOE), respectively. Krippendorff's alpha coefficients did not reveal unacceptable inter-rater reliabilities regarding the investigators and applicability of FIPS. Significant differences were documented when comparing restorations after FOE or supported by RAIs regarding bone loss (p < 0.01), presence of papillae (p < 0.05) and quality and quantity of mucosa (p < 0.02) in favor of FOE. CONCLUSIONS: Within the main limitations of sample size and the retrospective study design, both concepts seem to provide clinically acceptable results. CLINICAL RELEVANCE: Bone- and tissue-preserving characteristics regarding the concept of FOE are promising. It could be applicable for socket preservation and subsequent conventional implant placements in an adapted workflow.
RESUMEN
OBJECTIVES: To evaluate long-term survival and success rates of conventionally cemented partial-coverage crowns (PCCs) manufactured from high noble metal alloys (hn). MATERIAL AND METHODS: Restoration-, periodontal- and tooth-related criteria on patients, restored with a single or multiple conventionally cemented hnPCCs in a private dental office were collected from existing patient records. With regard to semi-annual follow-ups, data of the most recent clinical evaluations were considered. Kaplan-Meier and log-rank tests were used for statistical analyses. Level of significance was set at p ≤ .05. RESULTS: Between 09/1983 and 09/2009, 1325 hnPCCs were conventionally cemented on 1325 teeth in 266 patients (mean age: 44.5 ± 10.7 years). Due to various reasons, 81 hnPCCs showed complications, documenting a success rate of 93.9% after a mean observation period of 18.8 ± 5.7 years. Of these, additional 14 restorations were counted as survival, resulting in a survival rate of 94.9%. Most frequent complications were periodontal issues (n = 29, 35.8%). Significantly higher success rates were documented for hnPCCs of patients aged between 37 and 51 years (p = .012). CONCLUSION: Partial-coverage crowns from high noble metal alloys showed excellent survival and success rates after a mean observation period of 18.8 ± 5.7 years. Higher patient age was one of the risk factors. CLINICAL RELEVANCE: According to the results of this study, hnPCCs still represent an excellent therapeutic option-even in modern dentistry.
Asunto(s)
Porcelana Dental , Aleaciones de Cerámica y Metal , Adulto , Aleaciones , Coronas , Fracaso de la Restauración Dental , Humanos , Persona de Mediana Edad , Estudios RetrospectivosRESUMEN
PURPOSE: Creating wax-ups of missing teeth for backward planning in implant surgery is a complex and time-consuming process. To facilitate implant-planning procedures, the automatic generation of a virtual wax-up would be useful. In the present study, the reconstruction of missing teeth in partially edentulous patients was performed automatically using newly developed software. The accuracy was investigated in order to test its clinical applicability. MATERIALS AND METHODS: This study presents a new method for creating an automatic virtual wax-up, which could serve as a basic tool in modern implant-planning procedures. First, a statistical shape model (SSM) based on 76 maxillary and mandibular arch scans from dentally healthy individuals was generated. Then, artificially generated tooth gaps were reconstructed. The accuracy of the workflow was evaluated on a separate testing sample of 10 individuals with artificially created tooth gaps given as a median deviation, in millimeters. Scans of three clinical cases with partial edentulism were equally reconstructed using the SSM and compared with the final prosthodontic work. RESULTS: The reconstruction of the artificial tooth gaps could be performed with the following median reconstruction accuracy: gap 21 with 0.15 mm; gap 27 with 0.20 mm; gap 34 with 0.22 mm: gap 36 with 0.22 mm; gaps 12 to 22 with 0.22 mm; gaps 34 to 36 with 0.22 mm. A scenario for an almost edentulous mandible with all teeth missing except teeth 33 and 43 could be reconstructed with a median reconstruction accuracy of 0.37 mm. The median tooth gap deviation of the SSM-based reconstruction in clinical cases differed from the final inserted prosthodontic teeth by 0.49 to 0.86 mm in median. CONCLUSION: A first feasibility of creating virtual wax-ups using an SSM could be shown. Artificially generated tooth gaps could be reconstructed close to the original with the proposed workflow. In the clinical cases, the SSM proposes an anatomical reconstruction, which does not yet consider prosthodontic aspects. To obtain clinical use, contact with antagonist teeth must be considered and more training data must be implemented. However, the presented method offers a fast and viable way for the approximate placement of missing crowns. This could be used in a digital planning workflow when implant position must be determined. (Int J Comput Dent 2022;25(4):349-0; doi: 10.3290/j.ijcd.b2599407).
Asunto(s)
Implantes Dentales , Boca Edéntula , Humanos , Prostodoncia , Modelos Estadísticos , CoronasRESUMEN
OBJECTIVE: To assess clinical and patient-reported outcomes of implant-prosthetic rehabilitations in patients with a history of head-neck cancer (HNC), treated with tumor resection without (TR) or with adjuvant radiotherapy (TR/RT). A healthy cohort rehabilitated with the same reconstructive protocols served as control group (C). MATERIALS AND METHODS: A total of 28 women and 29 men were considered in the present retrospective study. Participants received 322 implants, finally supporting 79 prosthetic reconstructions. Primary outcome was the assessment of implant and prosthetic survival rates. Furthermore peri-implant soft tissue parameters (attached peri-implant mucosa, AM; modified bleeding and plaque indices, mBI/mPI; probing depth, PD) and prosthetic technical complications were documented. Patient-reported outcome measures (PROMs) by means of visual analog scales (VAS) and the Oral Health Impact Profile German 14 form (OHIP G14) were collected. For statistical purposes Chi-square and Mann-Whitney-U-Test were adapted. RESULTS: After a mean follow-up of 81.2 ± 50.3 months, implant survival rate was 98.1% (HNC-TR), 98.2% (HNC-TR/RT) and 100.0% (C), respectively (four implants failed in the HNC groups). HNC-TR/RT showed significant higher mPI and mBI compared to C. Within HNC-TR/RT, vestibuloplasty significantly reduced mBI and PD values. No failures occurred at the prosthetic level. Overall, higher VAS scores were reported for bar- compared with Locator-retained prostheses. Furthermore, increased OHIP G14 values resulted for HNC-TR/RT. CONCLUSIONS: High survival rates on implant and prosthetic level were observed. The use of soft tissue grafts resulted in stabilization of the peri-implant mucosa in irradiated patients. In terms of retention and chewing ability, participants preferred bars over Locator attachments.
Asunto(s)
Implantes Dentales , Neoplasias de Cabeza y Cuello , Arcada Edéntula , Prótesis Dental de Soporte Implantado , Retención de Dentadura , Prótesis de Recubrimiento , Femenino , Neoplasias de Cabeza y Cuello/radioterapia , Neoplasias de Cabeza y Cuello/cirugía , Humanos , Masculino , Estudios RetrospectivosRESUMEN
BACKGROUND: Accurate implant placement in the bone is key to successful implant treatment. Once inserted, it can be difficult to correct the orientation of the implant axis, especially of a one-piece implant. Prosthetic-driven digital implant planning in combination with fully guided implant surgery can offer additional safety in such cases. CASE PRESENTATION: The patient presented with a wide, edentulous interdental space extending from sites 13 to 16, which was to be restored with three one-piece zirconia implants supporting a zirconia fixed partial denture comprizing a cantilever to the mesial aspect. Digital planning based on DICOM (Digital Imaging and Communications in Medicine) and intraoral surface data was performed to ensure optimal positioning. Guided implant placement was executed using a contra-angle handpiece with special attachments and a compatible, sleeveless drill guide. Impressions of the implants for the final restoration were acquired using an intraoral scanner. Reflection-related errors were compensated for by using the given digital abutment geometry. The DICOM and STL datasets were superimposed and used as the basis for fabricating a monolithic zirconia restoration through a subtractive milling process. The final restoration was adhesively cemented. CONCLUSIONS: By using a prosthetic-driven implant planning strategy, it was possible to place the one-piece ceramic implants without an available implant manufacturer's guide-based solution. This was accomplished using a contra-angle surgical handpiece with special attachments and a compatible drill guide. This approach is particularly recommended for the placement of one-piece implants, which otherwise require irreversible abutment grinding for the adjustment of the implant axis orientation after placement. To increase the precision of the digital impressions of the implants, the ideal abutment geometry was imported and superimposed onto the scan data. The results demonstrate that the proposed method can dispense with the need for gingival retraction when acquiring impressions for implants of this type in the future.
Asunto(s)
Implantes Dentales , Flujo de Trabajo , Cerámica , Diseño Asistido por Computadora , Dentadura Parcial Fija , HumanosRESUMEN
OBJECTIVE: To evaluate the clinical and patient-reported outcome of all-ceramic zirconia implant supported fixed dental prostheses (FDPs) 5 years after implant installation. MATERIALS AND METHODS: Thirteen patients were treated with two terminally placed one-piece zirconia implants for a three-unit FDP each. The FDPs consisted of a CAD/CAM-fabricated zirconia framework over-pressed with a fluor-apatite veneering ceramic and were adhesively cemented. Survival and success were assessed by applying modified US Public Health Service (USPHS) criteria and preparation of Kaplan-Meier (KM) plots. Alpha and Bravo ratings were accepted for success (among others including small area veneer chippings and occlusal roughness), whereas Charlie ratings allowing for intra-oral correction (e.g., polishing) were accepted for survival. Furthermore, patient-reported outcome measures (PROMs) were analyzed with the help of visual analogue scales (VAS). Wilcoxon matched-pairs signed-rank test (USPHS criteria) and linear mixed models (PROMs) were used to evaluate time effects on response variables. RESULTS: All patients were available 61.8 ± 1.1 months after implant installation (53.6 ± 3.1 months after final prosthesis insertion). FDP survival was 100%. Significant incidence of veneer chipping (p = .0096) and occlusal roughness (p = .0019) was observed. Charlie rated extent of both phenomena resulted in a KM success estimate of 38.5% (95% CI: 14.1%-62.8%; seven FDPs with obvious roughness, three of them with extended veneer chipping). Compared with the pre-treatment assessments (30%-81% of satisfaction), all surveys at prosthetic delivery showed significantly improved VAS scores (66%-93%; p ≤ .038), except for speech (p = .341). Concerning function, esthetics and self-esteem, no decrease in satisfaction could be observed until the end of follow-up (90%-96%; p ≥ .057), whereas perception of sense (92%) and speech (95%) increased over time (p ≤ .030). Occurrence of technical complications did not correlate with patient satisfaction. CONCLUSIONS: Bi-layered FDPs made from zirconia/fluor-apatite highly satisfied patients but showed significant incidence of technical complications.
Asunto(s)
Aleaciones Dentales , Diseño de Prótesis Dental , Prótesis Dental de Soporte Implantado , Circonio , Adulto , Anciano , Apatitas , Femenino , Humanos , Masculino , Ensayo de Materiales , Persona de Mediana Edad , Medición de Resultados Informados por el Paciente , Estudios Prospectivos , Análisis de SupervivenciaRESUMEN
OBJECTIVE: This review aimed at evaluating the survival and technical complication rates of all-ceramic implant-supported single crowns (SC). MATERIAL AND METHODS: Three electronic databases were searched for clinical studies conducted at ≥ 15 patients examining implant-supported all-ceramic SCs over ≥ 12 months. Survival rates of implants and restorations plus technical complication rates of SCs were calculated and tested for statistical correlation with confounding variables. Statistical analysis was performed using a negative binomial distribution model to calculate 5- and 10-year survival and complication estimates. RESULTS: Forty-one included studies reported on implant-supported SCs made of veneered and monolithic high-strength oxide ceramics, monolithic, and veneered glass-based ceramics and of a monolithic resin-nano-ceramic (RNC). Survival estimates for SCs of 93% (95% CI: 86.6%-96.4%) after 5 years and 94.4% (95% CI: 91.1%-96.5%) after 10 years were calculated, corresponding values for implant survival were 95.3% (95% CI: 90.6%-97.7%) and 96.2% (95% CI: 95.1%-97.1%). Technical complication rates after 5/10 years were as follows: chipping 9.0% (95% CI: 5.4%-14.8%)/2.7% (95% CI: 2.1%-3.5%), framework fractures 1.9% (95% CI: 0.7%-4.9%)/1.2% (95% CI: 1%-1.5%), screw loosening 3.6% (95% CI: 1.6%-8.4%)/5.2% (95% CI: 3.6%-7.5%), and decementations with 1.1% (95% CI: 0.4%-2.8%) after 5 years. Some confounding variables influenced the above-mentioned estimates significantly. CONCLUSIONS: All-ceramic implant-supported SCs showed-with the exception of a RNC material-high survival rates. However, failures and technical complications occurred which have to be considered when informing patients on the treatment with implant-supported all-ceramic SCs.
Asunto(s)
Cerámica/uso terapéutico , Coronas , Materiales Dentales/uso terapéutico , Prótesis Dental de Soporte Implantado , Coronas/efectos adversos , Prótesis Dental de Soporte Implantado/efectos adversos , Prótesis Dental de Soporte Implantado/microbiología , Fracaso de la Restauración Dental , HumanosRESUMEN
OBJECTIVE: To assess the survival and technical complication rate of partial and full-arch all-ceramic implant-supported fixed dental prostheses (P-FDP/FA-FDP) and supporting implants. MATERIALS AND METHODS: An electronic search through three databases (MEDLINE/Pubmed, Cochrane Library, Embase) was conducted to identify relevant clinical studies with an observation period of at least 12 months, including ≥15 patients. Reconstruction and implant survival rates, technical complications and confounding variables such as processed/installed materials, retention mode and location in the mouth were obtained. Failure and complication rates were analyzed using standard Poisson regression models to calculate 5-year survival and complication estimates. RESULTS: A total of five studies for the P-FDP group and seven studies for the FA-FDP group were included, throughout evaluating veneered zirconia reconstructions. In the P-FDP group, reconstructions were located in posterior regions. Meta-analysis indicated survival estimates on the reconstruction level of 98.3% and 97.7% for P- and FA-FDPs after 5 years. However, chipping of the veneering ceramic was frequent, resulting in estimated 5-year complication rates of 22.8% (P-FDPs) and 34.8% (FA-FDPs). Five-year survival estimates of implants supporting P-FDPs and FA-FDPs of 98.5% and 99.4% were calculated, respectively. Including a total of 540 FDPs, one screw-loosening and 11 de-cementations were reported. Confounding variables were not found to have a significant influence on survival and complication rates. CONCLUSIONS: All-ceramic implant-supported P- and FA-FDPs comprising veneered zirconia frameworks showed high survival but clinically inacceptable fracture rates of the veneering ceramic. Their suitability with regard to this indication and a successful long-term outcome needs to be further evaluated.
Asunto(s)
Cerámica/uso terapéutico , Materiales Dentales/uso terapéutico , Dentadura Completa , Dentadura Parcial Fija , Cerámica/efectos adversos , Materiales Dentales/efectos adversos , Prótesis Dental de Soporte Implantado , Fracaso de la Restauración Dental , Dentadura Completa/efectos adversos , Dentadura Parcial Fija/efectos adversos , HumanosRESUMEN
OBJECTIVE: To evaluate implant survival, peri-implant tissue conditions, prosthodontic maintenance requirements and patient satisfaction of two differently retained implant-supported mandibular overdentures (IOD) after the 3 years of observation. MATERIALS AND METHODS: Twenty-five patients with edentulous mandibles received two implants each. Twelve patients were randomly selected to receive ball attachments, whereas 13 patients received prefabricated coni. Implant survival, peri-implant parameters (modified Plaque Index, Bleeding on Probing, modified Gingival Index, probing depth and marginal bone loss) and patient satisfaction were assessed. Additionally, prosthodontic maintenance was monitored. Clinical and radiographic follow-ups were performed 1, 2 and 3 years after prosthetic delivery. The Kaplan-Meier method was used to calculate complication rates. RESULTS: After a mean observation period of 29.6 months, an implant survival rate of 100% could be observed. There were no significant differences in the peri-implant parameters. During the observation period, six patients with conus attachment refused to further participate in follow-ups due to dissatisfaction with their treatment and had to be regarded as dropouts. Based on the Kaplan-Meier method, inacceptable retention was calculated for 80% and 75% of the patients in the ball and the conus groups, respectively. Patient satisfaction was 64% for the ball- and 100% for the conus-retained IODs, the latter only respecting five of initially 13 patients. CONCLUSION: The evaluated treatment method revealed high implant survival rates, but the prosthetic reconstruction required intensive maintenance. Therefore, a trend toward the reduced patient satisfaction was observed, and the promoted economy of the evaluated attachment systems should be questioned. For the conical attachment, the recommendation of the manufacturer is to use four interforaminal implants to support a removable prostheses.
Asunto(s)
Prótesis Dental de Soporte Implantado , Retención de Dentadura/métodos , Prótesis de Recubrimiento , Anciano , Femenino , Humanos , Arcada Edéntula/cirugía , Masculino , Mandíbula/cirugía , Satisfacción del Paciente , Resultado del TratamientoRESUMEN
OBJECTIVE: The aim of this uncontrolled prospective multicenter study was to determine the success and survival rate of posterior single crowns composed of zirconia frameworks hand-layered with a leucite-reinforced feldspathic ceramic supported by one-piece zirconia oral implants. MATERIAL AND METHODS: In two centers, sixty patients received 71 zirconia oral implants. To obtain a clear indication of posterior implant-supported single crowns (ISSCs), 14 patients (25 implants) were excluded from the analysis (11 bridges, three anterior crowns). The remaining patients were provided with single implants in posterior regions. As one patient lost his implant and another refused further participation after final prosthesis insertion, 44 ISSCs/patients (19 females, 25 males) were available for evaluation. Of these patients, all were seen at prosthetic delivery and the 6- and 12-month follow-up appointments. Evaluations were performed using modified United States Public Health Service (USPHS) criteria. Restorations within Alpha and Bravo ratings were regarded as success. This included minor chippings, a slight roughness, slightly soundable restoration margins and minimal contour deficiencies. In case of more distinct defects that could, however, be repaired to a clinically acceptable level, restorations were regarded as surviving. Kaplan-Meier plots and log-rank tests were used for the success/survival analyses and the calculation of potential group differences (gender, jaw and center). RESULTS: After a mean observation period of 12.5 months (SD: 0.8 months), no ISSC had to be replaced, resulting in a Kaplan-Meier survival rate of 100%. The Kaplan-Meier success rate was 90.9% (one major chipping, one obvious roughness, one significant crevice and one pronounced over-contouring). Minor chippings and occlusal roughness were frequent complications. No significantly different survival/success rates could be observed between the mentioned groups. CONCLUSION: The frequent incidence of minor chippings suggests a high technique sensitivity when providing zirconia implants with veneered zirconia-based crowns questioning its suitability for this indication.
Asunto(s)
Coronas , Prótesis Dental de Soporte Implantado , Circonio , Adulto , Anciano , Cerámica , Fracaso de la Restauración Dental , Femenino , Humanos , Masculino , Persona de Mediana Edad , Estudios Prospectivos , Resultado del Tratamiento , Adulto JovenRESUMEN
OBJECTIVE: The objective of this investigation was to determine the clinical and radiographic outcome of a one-piece alumina-toughened zirconia (ATZ) oral implant for single tooth replacement after 1 year. MATERIALS AND METHODS: A total of 27 patients received one ATZ implant each in a one-stage implant surgery with immediate temporization. Standardized radiographs were taken at implant insertion and after 1 year to monitor peri-implant bone loss. Several soft tissue parameters were evaluated at prosthesis insertion and at the 1-year follow-up. RESULTS: Three patients did not receive a prosthetic reconstruction due to implant loss during the healing period. As a result, 24 patients were seen at the 1-year follow-up, giving a cumulative survival rate of 88.9%. The average marginal bone loss after 1 year was 0.77 mm. Only two implants (8.3%) lost at least 2 mm bone, whereas none of the implants lost more than 3 mm. Probing depth and clinical attachment level increased over 1 year at the implant sites, whereas gingival recession remained stable. Mombelli's bleeding and plaque indices showed no statistically significant change within the first year. CONCLUSION: Owing to a total of 27 inserted implants, three failures within the first 4 months after implant placement carry weight. Therefore, the cumulative survival rate of the presented ceramic implant was slightly below reported survival rates of titanium implants when immediately restored. The recorded radiographic bone loss and peri-implant soft tissue parameters showed promising short-term results. The presented ATZ implant seems to be a candidate for clinical usage.
Asunto(s)
Óxido de Aluminio , Implantes Dentales de Diente Único , Circonio , Pérdida de Hueso Alveolar/diagnóstico por imagen , Fracaso de la Restauración Dental , Estudios de Seguimiento , Humanos , Estudios Prospectivos , Resultado del TratamientoRESUMEN
OBJECTIVE: The aim of this study was to determine the success and survival rate of all-ceramic bi-layered implant-supported three-unit fixed dental prostheses (IS-FDPs) 3 years after implant placement. MATERIAL AND METHODS: Thirteen patients (seven males, six females; age: 41-78 years) received two one-piece ceramic implants (alumina-toughened zirconia) each in the region of the premolars or the first molar and were finally restored with adhesively cemented bi-layered zirconia-based IS-FDPs (3 in the maxilla, 10 in the mandible) composed of CAD/CAM-fabricated zirconia frameworks pressed-over with fluor-apatite glass-ceramic ingots. At prosthetic delivery and the follow-ups after 1, 2 and 3 years, the restorations were evaluated using modified United States Public Health Service (USPHS) criteria. Restorations with minor veneer chippings, a small-area occlusal roughness, slightly soundable restoration margins, minimal contour deficiencies and tolerable color deviations were regarded as success. In case of more distinct defects that could, however, be repaired to a clinically acceptable level, IS-FDPs were regarded as surviving. Kaplan-Meier plots were used for the success/survival analyses. To verify an impact on subjective patients' perceptions, satisfaction was evaluated by visual analog scales (VAS). RESULTS: All patients were seen 3 years after implant installation. No IS-FDP had to be replaced, resulting in 100% survival after a mean observation period of 29.5 months (median: 30.7). At the 3-year follow-up, 7/13 IS-FDPs showed a veneer chipping, 13/13 an occlusal roughness and 12/13 minimal deficiencies of contour/color. Since six restorations showed a major chipping and/or a major occlusal roughness, the Kaplan-Meier success rate was 53.8%. However, patients' significantly improved perceptions of function, esthetics, sense, and speech at prosthetic delivery remained stable over time. CONCLUSION: Bi-layered zirconia/fluor-apatite IS-FDPs entirely survived the observation period but showed a high frequency of technical complications. Nevertheless, the treatment highly satisfied patients' expectations.
Asunto(s)
Apatitas , Implantes Dentales , Materiales Dentales , Aleaciones de Cerámica y Metal , Circonio , Adulto , Anciano , Cerámica , Cementos Dentales , Diseño de Prótesis Dental , Fracaso de la Restauración Dental , Femenino , Humanos , Estimación de Kaplan-Meier , Masculino , Persona de Mediana Edad , Estudios ProspectivosRESUMEN
OBJECTIVE: To determine the survival and success rate of CAD/CAM-fabricated monolithic lithium-disilicate crowns supported by zirconia oral implants after 3 years. MATERIAL AND METHODS: Twenty-four patients in need of a single tooth replacement received a zirconia implant and were finally restored with 24 single crowns (SCs) ground out of pre-crystallized lithium-disilicate blanks. The restorations were adhesively cemented and evaluated using modified United States Public Health Service (USPHS) criteria. In case of clinically relevant defects that could be repaired to an acceptable level, SCs were regarded as surviving. Restorations with minor chippings, a small-area roughness (ø <2 mm), slightly soundable marginal gaps, minimal under-/overcontours, and tolerable color deviations (<1 Vitashade) were regarded as success. The Kaplan-Meier method and log-rank tests were used for the success/survival analyses and the calculation of potential group differences (gender, location, jaw). Additionally, several patient-reported outcome measures (PROMs) were evaluated. RESULTS: Twenty-three patients were seen 3 years after implant placement. No SC had to be replaced, resulting in 100% survival. No chippings were observed. As one SC showed a major occlusal roughness, the Kaplan-Meier success rate after a mean observation period of 31 months was 95.7%. No group differences could be calculated. Compared with the pre-treatment surveys, the further PROMs showed a permanently improved perception of function, esthetics, sense, and speech. CONCLUSION: Monolithic lithium-disilicate SCs supported by zirconia implants showed promising survival and success rates after an observation period of 3 years. It remains to be seen whether the further observation period confirms this positive results.
Asunto(s)
Coronas , Prótesis Dental de Soporte Implantado/métodos , Adulto , Diseño Asistido por Computadora , Porcelana Dental , Diseño de Prótesis Dental/métodos , Retención de Prótesis Dentales , Humanos , Masculino , Persona de Mediana Edad , Resultado del Tratamiento , Adulto Joven , CirconioRESUMEN
PURPOSE: The aim of the study was to assess the deviation between clinical implant axes (CIA) determined by a surgeon during preoperative planning and reconstructed tooth axes (RTA) of missing teeth which were automatically computed by a previously introduced anatomical SSM. METHODS: For this purpose all available planning datasets of single-implant cases of our clinic, which were planned with coDiagnostix Version 9.9 between 2018 and 2021, were collected for retrospective investigation. Informed consent was obtained. First, the intraoral scans of implant patients were annotated and subsequently analyzed using the SSM. The RTA, computed by the SSM, was then projected into the preoperative planning dataset. The amount and direction of spatial deviation between RTA and CIA were then measured. RESULTS: Thirty-five patients were implemented. The mean distance between the occlusal entry point of anterior and posterior implants and the RTA was 0.99 mm ± 0.78 mm and 1.19 mm ± 0.55, respectively. The mean angular deviation between the CIA of anterior and posterior implants and the RTA was 12.4° ± 3.85° and 5.27° ± 2.97° respectively. The deviations in anterior implant cases were systematic and could be corrected by computing a modified RTA (mRTA) with decreased deviations (0.99 mm ± 0.84 and 4.62° ± 1.95°). The safety distances of implants set along the (m)RTA to neighboring teeth were maintained in 30 of 35 cases. CONCLUSION: The RTA estimated by the SSM revealed to be a viable implant axis for most of the posterior implant cases. As there are natural differences between the anatomical tooth axis and a desirable implant axis, modifications were necessary to correct the deviations which occurred in anterior implant cases. However, the presented approach is not applicable for clinical use and always requires manual optimization by the planning surgeon.
Asunto(s)
Implantes Dentales , Cirugía Asistida por Computador , Diente , Humanos , Tomografía Computarizada de Haz Cónico , Estudios Retrospectivos , Prótesis e Implantes , Diseño Asistido por Computadora , Imagenología TridimensionalRESUMEN
The objective was to investigate the clinical and radiological outcome of one-piece zirconia oral implants to support three-unit fixed dental prostheses (FDP) after three years in function. Twenty-seven patients were treated with a total of 54 implants in a one-stage surgery and immediate provisionalization. Standardized radiographs were taken at implant placement, after one year and after three years, to evaluate peri-implant bone loss. Soft-tissue parameters were also assessed. Linear mixed regression models as well as Wilcoxon Signed Rank tests were used for analyzing differences between groups and time points (p < 0.05). At the three-year evaluation, one implant was lost, resulting in a cumulative survival rate of 98.1%. The mean marginal bone loss amounted to 2.16 mm. An implant success grade I of 52% (bone loss of ≤2 mm) and success grade II of 61% (bone loss of ≤3 mm) were achieved. None of the evaluated baseline parameters affected bone loss. The survival rate of the zirconia implants was comparable to market-available titanium implants. However, an increased marginal bone loss was observed with a high peri-implantitis incidence and a resulting low implant success rate.
RESUMEN
OBJECTIVES: This in vitro study aimed to assess the influence of the planning software and design of the surgical template on both trueness and precision of static computer assisted implant surgery (sCAIS) performed using guides fabricated using material extrusion (ME). METHODS: Three-dimensional radiographic and surface scans of a typodont were aligned using two planning software (coDiagnostiX, CDX; ImplantStudio, IST) to virtually position the two adjacent oral implants. Thereafter, surgical guides were fabricated with either an original (O) or modified (M) design with reduced occlusal support and were sterilized. Forty surgical guides were used to install 80 implants equally distributed amongst four groups: CDX-O, CDX-M, IST-O, and IST-M. Thereafter, the scan bodies were adapted to the implants and digitized. Finally, inspection software was used to assess discrepancies between the planned and final positions at the implant shoulder and main axis level. Multilevel mixed-effects generalised linear models were used for statistical analyses (p = 0.05). RESULTS: In terms of trueness, the largest average vertical deviations (0.29 ± 0.07 mm) were be assessed for CDX-M. Overall, vertical errors were dependant on the design (O < M; p ≤ 0.001). Furthermore, in horizontal direction, the largest mean discrepancy was 0.32 ± 0.09 mm (IST-O) and 0.31 ± 0.13 mm (CDX-M). CDX-O was superior compared to IST-O (p = 0.003) regarding horizontal trueness. The average deviations regarding the main implant axis ranged between 1.36 ± 0.41° (CDX-O) and 2.63 ± 0.87° (CDX-M). In terms of precision, mean standard deviation intervals of ≤ 0.12 mm (IST-O and -M) and ≤ 1.09° (CDX-M) were calculated. CONCLUSIONS: Implant installation with clinically acceptable deviations is possible with ME surgical guides. Both evaluated variables affected trueness and precision with negligible differences. CLINICAL SIGNIFICANCE: The planning system and design influenced the accuracy of implant installation using ME-based surgical guides. Nevertheless, discrepancies were ≤ 0.32 mm and ≤ 2.63°, which may be considered within the range of clinical acceptance. ME should be further investigated as an alternative to the more expensive and time-consuming 3D printing technologies.
Asunto(s)
Implantes Dentales , Implantación Dental Endoósea , Diseño Asistido por Computadora , Imagenología Tridimensional , Tomografía Computarizada de Haz Cónico , Programas Informáticos , ComputadoresRESUMEN
PURPOSE: The accuracy of intraoral and model scanners has been widely investigated with heterogeneous results, but the impact of the applied diversity of measurement methods on the outcomes remains unknown. This study aimed to evaluate the influence of methodological factors on the measurement result when comparing full-arch scans. METHODS: The evaluation referred to a 5M model to analyze whether accuracy measurements are affected by (1) the reference geometry, (2) mesh density of the standard tessellation language (STL) datasets, (3) operator, (4) inspection software, and (5) alignment procedure. STL datasets of full-arch reference models were measured with 29 different combinations of these factors. For each combination, 10 repeated measurements of the intermolar width were performed. Trueness was statistically analyzed with one-way ANOVA and T-tests, repeatability with Levene tests, and reproducibility with interclass correlation coefficients. RESULTS: Measurement method variations affected the intermolar width by up to 186 µm. The alignment algorithm had a significant effect on the measurement outcome (p = 0.001). Likewise, reference geometry influenced trueness and repeatability significantly (p = 0.001), whereas mesh density affected the repeatability only in some cases. The operator had no impact on the measurement result. The inspection software affected the repeatability but not the trueness. CONCLUSION: The factors reference geometry and alignment algorithm highly affected the measurement outcome, while the operator, inspection software, and mesh density showed no impact on the trueness of the outcome. Cylindrical reference geometries showed fewer differences than bar-shaped ones and best-fit alignments fewer variations than alignments based on boundary parameters.
Asunto(s)
Técnica de Impresión Dental , Modelos Dentales , Diseño Asistido por Computadora , Imagenología Tridimensional , Reproducibilidad de los ResultadosRESUMEN
The purpose of the study was to compare conventional to digital workflows of occlusal splint production regarding time efficiency, overall fit, and wear. Fifteen Michigan splints were fabricated with a conventional and digital method. The duration for the dentist's and the dental technician's workload was recorded. Subsequently, the overall fit was examined with a four-level score (1-4). Paired t-tests were used to compare the time results for the conventional and digital workflows and the sign test to compare the overall fit. The mean time (16 min 58 s) for computerized optical impressions was longer than for conventional impressions (6 min 59 s; p = 0.0001). However, the dental technician needed significantly less mean time for the digital splint production (47 min 52 s) than for the conventional (163 min 32 s; p = 0.001). The overall fit of the digitally-fabricated splints was significantly better compared to the conventionally-fabricated splints (p = 0.002). There was no impact of the different materials used in the conventional and digital workflow on the wear (p = 0.26). The results suggest that the digital workflow for the production of occlusal splints is more time efficient and leads to a better fit than the conventional workflow.
RESUMEN
Adequate soft-tissue dimensions have been shown to be crucial for the long-term success of dental implants. To date, there is evidence that placement of dental implants should only be conducted in an area covered with attached gingiva. Modern implant planning software does not visualize soft-tissue dimensions. This study aims to calculate the course of the mucogingival borderline (MG-BL) using statistical shape models (SSM). Visualization of the MG-BL allows the practitioner to consider the soft tissue supply during implant planning. To deploy an SSM of the MG-BL, healthy individuals were examined and the intra-oral anatomy was captured using an intra-oral scanner (IOS). The empirical anatomical data was superimposed and analyzed by principal component analysis. Using a Leave-One-Out Cross Validation (LOOCV), the prediction of the SSM was compared with the original anatomy extracted from IOS. The median error for MG-BL reconstruction was 1.06 mm (0.49-2.15 mm) and 0.81 mm (0.38-1.54 mm) for the maxilla and mandible, respectively. While this method forgoes any technical work or additional patient examination, it represents an effective and digital method for the depiction of soft-tissue dimensions. To achieve clinical applicability, a higher number of datasets has to be implemented in the SSM.