A general method for rapid synthesis of refractory carbides by low-pressure carbothermal shock reduction.

Refractory carbides are attractive candidates for support materials in heterogeneous catalysis because of their high thermal, chemical, and mechanical stability. However, the industrial applications of refractory carbides, especially silicon carbide (SiC), are greatly hampered by their low surface area and harsh synthetic conditions, typically have a very limited surface area (<200 m2 g-1), and are prepared in a high-temperature environment (>1,400 °C) that lasts for several or even tens of hours. Based on Le Chatelier's principle, we theoretically proposed and experimentally verified that a low-pressure carbothermal reduction (CR) strategy was capable of synthesizing high-surface area SiC (569.9 m2 g-1) at a lower temperature and a faster rate (∼1,300 °C, 50 Pa, 30 s). Such high-surface area SiC possesses excellent thermal stability and antioxidant capacity since it maintained stability under a water-saturated airflow at 650 °C for 100 h. Furthermore, we demonstrated the feasibility of our strategy for scale-up production of high-surface area SiC (460.6 m2 g-1), with a yield larger than 12 g in one experiment, by virtue of an industrial viable vacuum sintering furnace. Importantly, our strategy is  also applicable to the rapid synthesis of refractory metal carbides (NbC, Mo2C, TaC, WC) and even their emerging high-entropy carbides (VNbMoTaWC5, TiVNbTaWC5). Therefore, our low-pressure CR method provides an alternative strategy, not merely limited to temperature and time items, to regulate the synthesis and facilitate the upcoming industrial applications of carbide-based advanced functional materials.

Thermodynamic, Kinetic, and Transport Contributions to Hydrogen Evolution Activity and Electrolyte-Stability Windows for Water-in-Salt Electrolytes.

Concentrated water-in-salt electrolytes (WiSEs) are used in aqueous batteries and to control electrochemical reactions for fuel production. The hydrogen evolution reaction is a parasitic reaction at the negative electrode that limits cell voltage in WiSE batteries and leads to self-discharge, and affects selectivity for electrosynthesis. Mitigating and modulating these processes is hampered by a limited fundamental understanding of HER kinetics in WiSEs. Here, we quantitatively assess how thermodynamics, kinetics, and interface layers control the apparent HER activities in 20 m LiTFSI. When the LiTFSI concentration is increased from 1 to 20 m, an increase in proton activity causes a positive shift in the HER equilibrium potential of 71 mV. The exchange current density, io, derived from the HER branch for 20 m LiTFSI in 98% purity (0.56 ± 0.05 µA/cmPt2), however, is 8 times lower than for 20 m LiTFSI in 99.95% (4.7 ± 0.2 µA/cmPt2) and 32 times lower than for 1 m LiTFSI in 98% purity (18 ± 1 µA/cmPt2), demonstrating that the WiSE's impurities and concentration are both central in significantly suppressing HER kinetics. The ability and applicability of the reported methods are extended by examining additional WiSEs formulations made of acetates and nitrates.

Dual-reporter SERS-based biomolecular assay with reduced false-positive signals.

We present a sensitive and quantitative protein detection assay that can efficiently distinguish between specific and nonspecific target binding. Our technique combines dual affinity reagents with surface-enhanced Raman spectroscopy (SERS) and chemometric analysis. We link one Raman reporter-tagged affinity reagent to gold nanoparticles and another to a gold film, such that protein-binding events create a "hot spot" with strong SERS spectra from both Raman reporter molecules. Any signal generated in this context is indicative of recognition by both affinity labels, whereas signals generated by nonspecific binding lack one or the other label, enabling us to efficiently distinguish true from false positives. We show that the number of hot spots per unit area of our substrate offers a quantitative measure of analyte concentration and demonstrate that this dual-label, SERS-linked aptasensor assay can sensitively and selectively detect human α-thrombin in 1% human serum with a limit of detection of 86 pM.

Protecting the Nanoscale Properties of Ag Nanowires with a Solution-Grown SnO2 Monolayer as Corrosion Inhibitor.

The chemical reactivity and/or the diffusion of Ag atoms or ions during thermal processing can cause irreversible structural damage, hindering the application of Ag nanowires (NWs) in transparent conducting films and other applications that make use of the material's nanoscale properties. Here, we describe a simple and effective method for growing monolayer SnO2 on the surface of Ag nanowires under ambient conditions, which protects the Ag nanowires from chemical and structural damage. Our results show that Sn2+ and Ag atoms undergo a redox reaction in the presence of water. First-principle simulations suggest a reasonable mechanism for SnO2 formation, showing that the interfacial polarization of the silver by the SnO2 can significantly reduce the affinity of Ag to O2, thereby greatly reducing the oxidation of the silver. The corresponding values (for example, before coating: 17.2 Ω/sq at 86.4%, after coating: 19.0 Ω/sq at 86.6%) show that the deposition of monolayer SnO2 enables the preservation of high transparency and conductivity of Ag. In sharp contrast to the large-scale degradation of pure Ag-NW films including the significant reduction of its electrical conductivity when subjected to a series of harsh corrosion environments, monolayer SnO2 coated Ag-NW films survive structurally and retain their electrical conductivity. Consequently, the thermal, electrical, and chemical stability properties we report here, and the simplicity of the technology used to achieve them, are among the very best reported for transparent conductor materials to date.

Merely Measuring the UV-Visible Spectrum of Gold Nanoparticles Can Change Their Charge State.

Metallic nanostructures exhibit a strong plasmon resonance at a wavelength whose value is sensitive to the charge density in the nanostructure, its size, shape, interparticle coupling, and the dielectric properties of its surrounding medium. Here we use UV-visible transmission and reflectance spectroscopy to track the shifts of the plasmon resonance in an array of gold nanoparticles buried under metal-oxide layers of varying thickness produced using atomic layer deposition (ALD) and then coated with bulk layers of one of three metals: aluminum, silver, or gold. A significant shift in the plasmon resonance was observed and a precise value of ωp, the plasmon frequency of the gold comprising the nanoparticles, was determined by modeling the composite of gold nanoparticles and metal-oxide layer as an optically homogeneous film of core-shell particles bounded by two substrates: one of quartz and the other being one of the aforementioned metals, then using a Maxwell-Garnett effective medium expression to extract ωp for the gold nanoparticles before and after coating with the bulk metals. Under illumination, the change in the charge density of the gold nanoparticles per particle determined from the change in the values of ωp is found to be some 50-fold greater than what traditional electrostatic contact electrification models compute based on the work function difference of the two conductive materials. Moreover, when using bulk gold as the capping layer, which should have resulted in a negligible charge exchange between the gold nanoparticles and the bulk gold, a significant charge transfer from the bulk gold layer to the nanoparticles was observed as with the other metals. We explain these observations in terms of the "plasmoelectric effect", recently described by Atwater and co-workers, in which the gold nanoparticles modify their charge density to allow their resonant wavelength to match that of the incident light, thereby achieving, a lower value of the chemical potential due to the entropy increase resulting from the conversion of the plasmon's energy to heat. We conclude that even the act of registering the spectrum of nanoparticles is at times sufficient to alter their charge densities and hence their UV-visible spectra.

Fundamentally Addressing Bromine Storage through Reversible Solid-State Confinement in Porous Carbon Electrodes: Design of a High-Performance Dual-Redox Electrochemical Capacitor.

Research in electric double-layer capacitors (EDLCs) and rechargeable batteries is converging to target systems that have battery-level energy density and capacitor-level cycling stability and power density. This research direction has been facilitated by the use of redox-active electrolytes that add faradaic charge storage to increase energy density of the EDLCs. Aqueous redox-enhanced electrochemical capacitors (redox ECs) have, however, performed poorly due to cross-diffusion of soluble redox couples, reduced cycle life, and low operating voltages. In this manuscript, we propose that these challenges can be simultaneously met by mechanistically designing a liquid-to-solid phase transition of oxidized catholyte (or reduced anolyte) with confinement in the pores of electrodes. Here we demonstrate the realization of this approach with the use of bromide catholyte and tetrabutylammonium cation that induces reversible solid-state complexation of Br2/Br3-. This mechanism solves the inherent cross-diffusion issue of redox ECs and has the added benefit of greatly stabilizing the reactive bromine generated during charging. Based on this new mechanistic insight on the utilization of solid-state bromine storage in redox ECs, we developed a dual-redox EC consisting of a bromide catholyte and an ethyl viologen anolyte with the addition of tetrabutylammonium bromide. In comparison to aqueous and organic electric double-layer capacitors, this system enhances energy by factors of ca. 11 and 3.5, respectively, with a specific energy of ∼64 W·h/kg at 1 A/g, a maximum power density >3 kW/kg, and cycling stability over 7000 cycles.

Double-Layered Plasmonic-Magnetic Vesicles by Self-Assembly of Janus Amphiphilic Gold-Iron(II,III) Oxide Nanoparticles.

Janus nanoparticles (JNPs) offer unique features, including the precisely controlled distribution of compositions, surface charges, dipole moments, modular and combined functionalities, which enable excellent applications that are unavailable to their symmetrical counterparts. Assemblies of NPs exhibit coupled optical, electronic and magnetic properties that are different from single NPs. Herein, we report a new class of double-layered plasmonic-magnetic vesicle assembled from Janus amphiphilic Au-Fe3 O4 NPs grafted with polymer brushes of different hydrophilicity on Au and Fe3 O4 surfaces separately. Like liposomes, the vesicle shell is composed of two layers of Au-Fe3 O4 NPs in opposite direction, and the orientation of Au or Fe3 O4 in the shell can be well controlled by exploiting the amphiphilic property of the two types of polymers.

Anisotropic Growth of TiO2 onto Gold Nanorods for Plasmon-Enhanced Hydrogen Production from Water Reduction.

Plasmonic metal/semiconductor heterostructures show promise for visible-light-driven photocatalysis. Gold nanorods (AuNRs) semi-coated with TiO2 are expected to be ideally structured systems for hydrogen evolution. Synthesizing such structures by wet-chemistry methods, however, has proved challenging. Here we report the bottom-up synthesis of AuNR/TiO2 nanodumbbells (NDs) with spatially separated Au/TiO2 regions, whose structures are governed by the NRs' diameter, and the higher curvature and lower density of CnTAB surfactant at the NRs' tips than on their lateral surfaces, as well as the morphology's dependence on concentration, and alkyl chain length of CnTAB. The NDs show plasmon-enhanced H2 evolution under visible and near-infrared light.

Efficient Charge Storage in Dual-Redox Electrochemical Capacitors through Reversible Counterion-Induced Solid Complexation.

The performance of redox-enhanced electrochemical capacitors (redox ECs) is substantially improved when oxidized catholyte (bromide) and reduced anolyte (viologen) are retained within the porous electrodes through reversible counterion-induced solid complexation. Investigation of the mechanism illustrates design principles and identifies pentyl viologen/bromide (PV/Br) as a new high-performance electrolyte. The symmetric PV/Br redox EC produces a specific energy of 48.5 W·h/kgdry at 0.5 A/gdry (0.44 kW/kgdry) with 99.7% Coulombic efficiency, maintains stability over 10 000 cycles, and functions identically when operated with reversed polarity.

Panchromatic photoproduction of H2 with surface plasmons.

The optical resonances of plasmonic nanostructures depend critically on the geometrical details of the absorber. We show that this unique property of plasmons can potentially be used to create panchromatic absorbers covering most of the useful solar spectrum, by measuring the light-to-hydrogen conversion capabilities of a series multielectrode photocatalytic devices, based on functionalized gold nanorods of appropriately chosen aspect ratios. Judiciously combining nanorods of various aspect ratios almost doubles the H2 production of the device over what is optimally possible with a device using gold nanorods of a single aspect ratio (all other key parameters being equal). The estimated quantum efficiency (absorbed photons-to-hydrogen) averaged over the entire solar spectrum of the best performing plasmonic multielectrode array was approximately 0.1%, and the measured H2 production rate for all of the devices was found to be approximately proportional to the hot electron generation. The device was monitored continuously for over 200 hr of operation without measurable diminution in the rate.

Uniform Concave Polystyrene-Carbon Core-Shell Nanospheres by a Swelling Induced Buckling Process.

We have developed a facile procedure that can create asymmetrical building blocks by uniformly deforming nanospheres into C(∞v) symmetry at low cost and high quality. Concave polystyrene@carbon (PS@C) core-shell nanospheres were produced by a very simple microwave-assisted alcohol thermal treatment of spherical PS@C nanoparticles. The dimensions and ratio of the concave part can be precisely controlled by temperature and solvents. The concavity is created by varying the alcohol-thermal treatment to tune the swelling properties that lead to the mechanical deformation of the PS@C core-shell structure. The driving force is attributed to the significant volume increase that occurs upon polystyrene core swelling with the incorporation of solvent. We propose a mechanism adapted from published models for the depression of soft capsules. An extrapolation from this model predicts that the rigid shell is used to generate a cavity in the unbuckled shell, which is experimentally confirmed. This swelling and deformation route is flexible and should be applicable to other polymeric nanoparticles to produce asymmetrical nanoparticles.

Constructing Hierarchical Porous Zeolites via Kinetic Regulation.

Zeolites are crystalline inorganic solids with microporous structures, having widespread applications in the fields of catalysis, separation, adsorption, microelectronics, and medical diagnosis. A major drawback of zeolites is the mass transfer limitation due to the small size of the micropores (less than 1 nm). Numerous efforts have been dedicated to integrating mesopores with the microporous zeolite structures by using templating and/or destructive approaches. Here we provide a new strategy for hierarchical pore size zeolite synthesis, without using supramolecular or hard templates. The branching epitaxial growth behavior, as a result of aluminum-zoning, contributes to the formation of the hierarchical porous zeolite structures.

Constructing two-dimensional nanoparticle arrays on layered materials inspired by atomic epitaxial growth.

Constructing nanoparticles into well-defined structures at mesoscale and larger to create novel functional materials remains a challenge. Inspired by atomic epitaxial growth, we propose an "epitaxial assembly" method to form two-dimensional nanoparticle arrays (2D NAs) directly onto desired materials. As an illustration, we employ a series of surfactant-capped nanoparticles as the "artificial atoms" and layered hybrid perovskite (LHP) materials as the substrates and obtain 2D NAs in a large area with few defects. This method is universal for nanoparticles with different shapes, sizes, and compositions and for LHP substrates with different metallic cores. Raman spectroscopic and X-ray diffraction data support our hypothesis of epitaxial assembly. The novel method offers new insights into the controllable assembly of complex functional materials and may push the development of materials science at the mesoscale.

Superior cathode of sodium-ion batteries: orthorhombic V2O5 nanoparticles generated in nanoporous carbon by ambient hydrolysis deposition.

For the first time, we demonstrate that orthorhombic V2O5 can exhibit superior electrochemical performance in sodium ion batteries when uniformly coated inside nanoporous carbon. The encapsulated V2O5 shows a specific capacity as high as 276 mAh/g, while the whole nanocomposite exhibits a capacity of 170 mAh/g. The V2O5/C composite was fabricated by a novel ambient hydrolysis deposition that features sequential water vapor adsorption in nanoporous carbon, followed by a hydrolysis reaction, exclusively inside the nanopores. The unique structure of the nanocomposite significantly enhances the capacity as well as the rate performance of orthorhombic V2O5 where the composite retains a capacity of over 90 mAh/g at a current rate of 640 mA/g. Furthermore, by calculating, we also revealed that a large portion of the sodium-ion storage, particularly at high current rates, is due to the V2O5 pseudocapacitance.

Polyimide dendrimers containing multiple electron donor-acceptor units and their unique photophysical properties.

A high-yielding synthesis of a series of polyimide dendrimers, including decacyclene- and perylene-containing dendrimer D6, in which two types of polyimide dyes are present, is reported. In these constructs, the branching unit is represented by trisphenylamine, and the solubilizing chains by N-9-heptadecanyl-substituted perylene diimides. The photophysical properties of the dendrimers have been studied by absorption, steady-state, and time-resolved emission spectroscopy and pump-probe transient absorption spectroscopy. Photoinduced charge-separated (CS) states are formed on the femtosecond timescale upon visible excitation. In particular, in D6, two different CS states can be formed, involving different subunits that decays independently with different lifetimes (ca. 10-100 ps).

Clotting activity of polyphosphate-functionalized silica nanoparticles.

We present a silica nanoparticle (SNP) functionalized with polyphosphate (polyP) that accelerates the natural clotting process of the body. SNPs initiate the contact pathway of the blood-clotting system; short-chain polyP accelerates the common pathway by the rapid formation of thrombin, which enhances the overall blood-clotting system, both by accelerating fibrin generation and by facilitating the regulatory anticoagulation mechanisms essential for hemostasis. Analysis of the clotting properties of bare SNPs, bare polyP, and polyP-functionalized SNPs in plasma demonstrated that the attachment of polyP to SNPs to form polyP-SNPs creates a substantially enhanced synergistic effect that lowers clotting time and increases thrombin production at low concentrations. PolyP-SNP even retains its clotting function at ambient temperature. The polyP-SNP system has the potential to significantly improve trauma-treatment protocols and outcomes in hospital and prehospital settings.

Microwave synthesis of microstructured and nanostructured metal chalcogenides from elemental precursors in phosphonium ionic liquids.

We describe a general approach for the synthesis of micro-/nanostructured metal chalcogenides from elemental precursors. The excellent solubility of sulfur, selenium, and tellurium in phosphonium ionic liquids promotes fast reactions between chalcogens and various metal powders upon microwave heating, giving crystalline products. This approach is green, universal, and scalable.

Integrated approach to evaluating the toxicity of novel cysteine-capped silver nanoparticles to Escherichia coli and Pseudomonas aeruginosa.

Because of microbial resistance to conventional antibiotics, there is increasing interest in silver, including silver nanoparticles (nano-Ag), in antimicrobial applications. However, questions remain regarding the relative roles of nano-Ag particles, versus Ag(+) ions released from nano-Ag dissolution, in imparting bacterial toxicity. Here, we developed a novel nano-Ag that, based on its cysteine cap, was expected to dissolve slowly and thus potentially allow for differentiating nanoparticle, versus ionic, effects of Ag. The nano-Ag was systematically tested for its differential toxicity to Escherichia coli and Pseudomonas aeruginosa. Bacterial growth, reactive oxygen species (ROS) generation, particle dissolution, cellular electron transfer activity, and cell membrane damage and potential were evaluated. In minimal growth medium, E. coli and P. aeruginosa growth were slowed at 100 mg L(-1) (0.93 mM) and 5 mg L(-1) (0.046 mM), respectively; P. aeruginosa was completely inhibited at and above 10 mg L(-1) (0.093 mM). For both strains, toxicity was associated with ROS and cell membrane damage. Based on comparisons to AgNO3 exposures, toxicity from nano-Ag was due to Ag(+) ions and not intact nano-Ag, even though nanoparticle dissolution was less than 2% in minimal growth medium. Because of their stability and slow Ag(+) ion release, the cysteine-capped nano-Ag particles here are useful to antimicrobial applications. Additionally, our systematic approach to evaluating toxicity, membrane damage, and ROS generation can be applied with other nanomaterials and bacteria.

Electrochemical enzymatic biosensor with long-term stability using hybrid mesoporous membrane.

An acetylcholinesterase-immobilized sensor unit was successfully prepared by encapsulating the enzyme within hybrid mesoporous silica membranes (F127-MST). Through a novel combination with tetracyanoquinodimethane, both acetylcholine and organophosphorus pesticides were successfully detected with high sensitivity. Furthermore, we manufactured the working prototype of an enzyme sensor with this sensor unit for detecting dichlorvos, aldicarb and parathion. At present, the detection limit in this working prototype either equaled or surpassed that of others. Also, we have the advantage of increased stability of the enzyme against the outer environment by encapsulation of the enzymes into a silica nanospace. Consequently, acetylcholinesterase immobilized in F127-MST is a practical sensor with high sensitivity, reusability, and storage stability.