Hypermutation of the inactive X chromosome is a frequent event in cancer.

Mutation is a fundamental process in tumorigenesis. However, the degree to which the rate of somatic mutation varies across the human genome and the mechanistic basis underlying this variation remain to be fully elucidated. Here, we performed a cross-cancer comparison of 402 whole genomes comprising a diverse set of childhood and adult tumors, including both solid and hematopoietic malignancies. Surprisingly, we found that the inactive X chromosome of many female cancer genomes accumulates on average twice and up to four times as many somatic mutations per megabase, as compared to the individual autosomes. Whole-genome sequencing of clonally expanded hematopoietic stem/progenitor cells (HSPCs) from healthy individuals and a premalignant myelodysplastic syndrome (MDS) sample revealed no X chromosome hypermutation. Our data suggest that hypermutation of the inactive X chromosome is an early and frequent feature of tumorigenesis resulting from DNA replication stress in aberrantly proliferating cells.

Analyzing the reduction quality of the distal radioulnar joint after closed K-wire transfixation in a cadaver model: is supination or neutral position superior?

INTRODUCTION: Distal radioulnar joint (DRUJ) instabilities are challenging and their optimal treatment is controversial. In special cases or when reconstruction of the stabilizing triangular fibrocartilage complex (TFCC) fails, K-wire transfixation can be performed. However, no consensus has been reached regarding the rotational position of the forearm in which this should be done. Therefore, it was investigated whether anatomical reduction would best be achieved by transfixation in neutral position or supination of the forearm. MATERIALS AND METHODS: Twelve cadaveric upper limbs were examined before dissection of the DRUJ stabilizing ligaments and after closed transfixation in both positions by C-arm cone-beam CT. Whether this was first done in neutral position or in supination was randomized. The change in the radioulnar ratio (RR) in percentage points (%points) was analyzed using Student's t-test. RR was used since it is a common and sensitive method to evaluate DRUJ reduction, expressing the ulnar head's position in the sigmoid notch as a length ratio. RESULTS: The analysis showed an increased change in RR in neutral position with 5.4 ± 9.7%points compared to fixation in supination with 0.2 ± 16.1%points, yet this was not statistically significant (p = 0.404). CONCLUSIONS: Neither position leads to a superior reduction in general. However, the result was slightly closer to the anatomical position in supination. Thus, transfixation of the DRUJ should be performed in the position in which reduction could best be achieved and based on these data, that tends to be in supination. Further studies are necessary to validate these findings and to identify influential factors.

Evaluation of Software-Based Metal Artifact Reduction in Intraoperative 3D Imaging of the Spine Using a Mobile Cone Beam CT.

The aim of our study was to evaluate whether software-based artifact reduction can achieve an improved image quality, using intraoperative 3D imaging in spinal surgery. A total of 49 intraoperative 3D image datasets of patients, who underwent surgery with pedicle screw placement, were retrospectively evaluated. The visibility of anatomical structures and the diameter of the pedicle screws were examined, with and without the application of the artifact reduction software. All software prototypes can improve the visibility of anatomical structures (P < 0.01), except MAR (metal artifact reduction) combined with IRIS (iterative reconstruction in image space) (P = 0.04). The algorithms MAR and MAR-2 can reduce the blooming artifacts significantly (P < 0.01), but SL (Shepp & Logan) cannot (P = 0.08-0.988). In summary, software-based artifact reduction for intraoperative 3D datasets can improve the current image quality. Additional information regarding the implant placement and the fracture reduction is therefore generated for the surgeon.

Influence of reduction quality on functional outcome and quality of life in treatment of tibial plafond fractures: a retrospective cohort study.

BACKGROUND: The aim of the study was to evaluate the impact of reduction quality, using intraoperative 3D imaging, on quality of life and functional outcome in the operative treatment of tibial plafond fractures. METHODS: A group of patients with tibial plafond fractures was re-examined. The operative treatment was performed between September 2001 and October 2011. The follow-up examination was at least 2 years after the final surgical procedure. Final reduction result was assessed intraoperatively using a mobile 3D C-arm. A categorization with regard to descriptive parameters as well as type and size of joint surface irregularities was performed. Follow-up results were evaluated using: Olerud and Molander (O & M) score, Short-Form-36 (SF-36) score, movement deficit, Kellgren and Lawrence grade of osteoarthritis, and pain intensity. RESULTS: 34 patients with operatively treated tibial plafond fracture could be re-examined. Reduction quality had the greatest influence on functional result measured by the O & M score (p = 0.001) and the PCS domain of the SF-36 score (p = 0.018). Significant differences with regard to O & M score (p = 0.000), SF-36 score (p = 0.001 to p = 0.02; without MCS domain), movement deficit (p = 0.001), grade of osteoarthritis (p = 0.005) and pain (p = 0.001) could be verified under consideration of the reduction quality. The group with the anatomically more accurate reduction also showed a better result for clinical follow-up and quality of life. Furthermore, it is not the type of joint surface irregularity that is always decisive, but rather the size. CONCLUSIONS: Despite other relevant factors, it appears that reduction quality -which can be analyzed with intraoperative 3D imaging- plays the most important role in postoperative quality of life and functional outcome. Corrections should therefore be performed on joint surface irregularities with a size above 2 mm.

Radiographic assessment of overlengthening of the MoPyC radial head prosthesis: a cadaveric study.

INTRODUCTION: The aim of this study was to evaluate a radiographic measurement method for assessment of overlengthening of the MoPyC radial head prosthesis. MATERIALS AND METHODS: Seven cadaver specimens were studied in ten stages: native specimen (1), radial head resection (2), and implantation of the MoPyC radial head prostheses (Bioprofile, Tornier, Montbonnot-Saint-Martin, France) in four increasing length (correct length, overlengthening of 1.5 mm, 3 mm, and 5 mm) with an intact medial collateral ligament (MCL 3-6) and following transection of the MCL (7-10). The radiographic measurement method according to Athwal et al. was evaluated to detect overlengthening. Statistical analysis included calculation of the diagnostic accuracy of the radiographic method. RESULTS: The radiographic measurement method correctly determined the size of the radial head prosthesis within ± 1 mm in 224 of 336 scenarios (67%) and within ± 2 mm in 320 of 336 scenarios (95%). With a threshold value of ≥ 1 mm, the overall diagnostic sensitivity for detecting overlengthening when it was present and was 90% and the specificity was 79%. The sensitivity was higher with increasing size of the prosthesis: in cases with overlengthening of 1.5 mm, the sensitivity was 76%, with an overlengthening of 3 mm, the sensitivity was 95%, and with an overlengthening of 5 mm, the sensitivity was 100%. CONCLUSION: The radiographic measurement method of Athwal et al. can be used to estimate and to diagnose the magnitude overlengthening of the MoPyC radial head prosthesis. However, the sensitivity is limited (76%) in cases with a small amount of overlengthening of 1.5 mm.

Tablets for Image Review and Communication in Daily Routine of Orthopedic Surgeons-An Evaluation Study.

Medical images are essential in modern traumatology and orthopedic surgery. Access to images is often cumbersome due to a limited number of workstations. Moreover, due to the tremendous increase of data, the time to review or to communicate images has also become limited. One approach to overcome these problems is to make use of modern mobile devices, like tablet computers, to facilitate image access and associated workflows. Ten orthopedic surgeons were equipped with an Apple iPad mini 2 and specialized viewing software for medical images. The surgeons were able to send images from a workstation onto the tablets or to search for patient images directly. The software enabled the physicians to share images, annotated key slices, and messages instantly with their colleagues. The surgeons carried the tablets within or in the periphery of the hospital. The participants evaluated the software by means of daily questionnaires. Data was collected for a period of 9 months. Nearly 25 images were viewed in total by the surgeons per day. The tablet viewer was used for accessing approximately 30% of these images. On average, the surgeons were asked 1.7 times per day by a colleague for a second opinion. They used the tablets in approximately 29% of these cases. Furthermore, the mean time for accessing images was significantly lower using mobile software compared to conventional methods. Tablet computers can play a vital role for image access and communication in the daily routine of an orthopedic surgeon. Mobile image access is an important aspect for surgeons, especially in larger facilities, to facilitate and accelerate the clinical workflows.

Intraoperative three-dimensional imaging in the treatment of distal radius fractures.

INTRODUCTION: In operative treatment of distal radius fractures satisfying outcome mainly relies on anatomical fracture reduction and correct implant placement. Examination with two-dimensional fluoroscopy may not provide reliable information about this. The aim of this study was to determine the effectiveness of additional intraoperative three-dimensional imaging in the operative treatment of comminuted distal radius fractures. MATERIALS AND METHODS: From August 2001 to June 2015, patients with a distal radius fracture who were treated operatively and received intraoperative three-dimensional scan were included. The findings of the three-dimensional scan were documented by the operative surgeon and analyzed retrospectively with regard to incidence and the need for intraoperative revisions. Clinical evaluation included the patient's medical history, the injury pattern of the affected wrist (according to the OTA/AO fracture classification) and concomitant injuries. Intraoperative and postoperative complications and revision surgeries were evaluated as well. RESULTS: Of 4515 operatively treated distal radius fractures, 307 (6.8%) received additional intraoperative three-dimensional imaging during surgery. 263 of 307 patients (85.7%) had a distal radius fracture type C. Intraoperative three-dimensional imaging revealed findings in 125 patients (40.7%) that were not detected on conventional two-dimensional fluoroscopy. In 54 patients (17.6%) these findings led to an immediate revision. Most commonly, revision was done in the case of remaining steps in the articular surface ≥ 1 mm (n = 25, 8.1%) followed by intra-articular screw placement (n = 23, 7.5%). CONCLUSIONS: Intraoperative three-dimensional imaging can provide additional information compared to conventional two-dimensional fluoroscopy in the operative treatment of distal radius fractures with the possibility of immediate intraoperative revision.

Radial head prosthesis in complex elbow dislocations: effect of oversizing and comparison with ORIF.

PURPOSE: Elbow dislocations with complex elbow instability (CEI) and unstable radial head fractures require reconstruction by open reduction and internal fixation (ORIF) if possible or alternatively by a radial head prosthesis. The aim of this study was to determine the differential outcome of both strategies and to investigate the contribution of prosthesis-related radiographic factors such as oversizing on clinical outcome. METHODS: A total of 53 patients underwent ligament and coronoid refixation, and radial head reconstruction by ORIF (n = 18; group 1) or by monopolar modular prosthesis (n = 35; group 2). Patients were followed by the Mayo Elbow Performance Score (MEPS) and a radiological score including prosthesis oversizing, joint subluxation, ossifications, capitellar erosions, implant loosening and ulno-humeral osteoarthritis. To investigate the effect of oversizing, group 2 was subdivided by prosthesis overlenghtening ≥ 2 mm. RESULTS: A total of 42 patients (79.2%) could be followed for 3.0 ± 1.3 years with an average MEPS of 76.8 ± 17.2. Patients with ORIF had slightly better MEPS (82.1 ± 9.9) as compared with group 2 (74.7 ± 19.1) though three ORIF patients required an early conversion to prosthesis. In group 2, oversizing occurred frequently and 50% showed an overlenghtening ≥ 2 mm. Oversizing significantly decreased MEPS (63.2 ± 21.3 vs 84.7 ± 9.0; p = 0.001) and elbow range of motion and increased the occurrence of other radiological abnormalities and the risk for surgical revisions. The radiological score and prosthesis overlenghtening but not prosthesis diameter showed an inverse correlation with MEPS. CONCLUSIONS: In CEI a radial head reconstruction with a prosthesis demonstrates similarly good clinical results as compared to ORIF in anatomically sized prosthesis, but prosthesis oversizing could induce other radiographic abnormalities with then deteriorated outcome.

Posttraumatic and postoperative osteomyelitis: surgical revision strategy with persisting fistula.

INTRODUCTION: Posttraumatic and postoperative osteomyelitis (PPO) with bacteria colonisation during trauma and associated surgery is an increasing clinical problem. This study investigated the treatment of PPO by surgical revision including irrigation, debridement, and temporary hardware maintenance. In addition, a drainage was inserted as persisting fistula to control osteomyelitis until fracture healing was achieved. Trauma- and osteomyelitis-related factors that influenced the study outcome were determined. PATIENTS AND METHODS: 67 consecutive patients with PPO were included. At onset of PPO, patients had incomplete fracture healing. Patients were subdivided by time of PPO occurrence (acute, subacute or chronic), initial soft tissue trauma, anatomical location, and initial fracture type (AO classification). The study outcome measures included radiographic and clinical follow-up. RESULTS: 59 patients could be followed for an average of 23 months after revision surgery. A bone healing was achieved by 89% of patients after 14.7 ± 13.4 weeks. Fractures of the lower extremity, open fractures and comminuted C-type fractures took significantly longer to achieve bone healing (p < 0.05 each). Time of PPO occurrence did not influence bone healing. After fracture consolidation, no re-infection was found. CONCLUSIONS: This study showed high rates of bone healing, indicating that this strategy with persisting fistula should be considered as alternative treatment option in patients with PPO.

Software-based method for automated intraoperative planning of Schoettle Point in surgical medial patellofemoral ligament reconstruction: A comparative validation study.

BACKGROUND: The aim of the study was to validate a software-based planning method for the Schoettle Point and to evaluate precision and time efficiency of its live overlay on the intraoperative X-ray. METHODS: A software-based method was compared with surgeons' manual planning in an inter- and intrarater study. Subsequently, K-wire placement was performed with and without an overlay of the planning. The time used and the precision achieved were statistically compared. RESULTS: The average deviation between the surgeons (1.68 mm; 2.26 mm) was greater than the discrepancy between the surgeons and the software-based planning (1.30 mm; 1.38 mm). In the intrarater comparison, software-based planning provided consistent results. Live overlay showed a significantly lower positioning error (0.9 ± 0.5 mm) compared with that without overlay (3.0 ± 1.4 mm, p = 0.000; 3.1 ± 1.4 mm, p = 0.001). Live overlay did not achieve a significant time gain (p = 0.393; p = 0.678). CONCLUSION: The software-based planning and live overlay of the Schoettle Point improves surgical precision without negatively affecting time efficiency.

Analysis of the cost-efficiency of the vascular impulse technology (VIT) in the perioperative management of complex ankle fractures: results of a prospective randomised controlled trial.

INTRODUCTION: Posttraumatic swelling causes a delay in surgery, a prolonged hospital stay and a higher risk of complications. Thus, soft tissue conditioning following complex ankle fractures is of central importance in their perioperative management. Since the clinical benefit of VIT usage on the clinical course has been shown, it should now be investigated whether it is also cost-efficient in doing so. MATERIALS AND METHODS: Included are published clinical results of the prospective, randomised, controlled, monocentric VIT study that have proven the therapeutic benefit in complex ankle fractures. Participants were allocated in a 1:1 ratio into the intervention group (VIT) and the control group (elevation). In this study, the required economic parameters of these clinical cases were collected on the data of the financial accounting and an estimation of annual cases had been performed to extrapolate the cost-efficiency of this therapy. The primary endpoint was the mean savings (in €). RESULTS: Thirty-nine cases were studied in the period from 2016 to 2018. There was no difference in the generated revenue. However, due to lower incurred costs in the intervention group, there were potential savings of about €2000 (pITT = 0.073) to 3000 (pAT = 0.008) per patient compared to the control group with therapy costs decreasing as the number of patients treated increases from €1400 in one case to below €200 per patient in 10 cases. There were 20% more revision surgeries in the control group or 50 min more OR time, respectively, and an increased attendance by staff and medical personnel of more than 7 h. CONCLUSIONS: VIT therapy has been shown to be a beneficial therapeutic modality, but it is so not only in regard to soft-tissue conditioning but also cost efficiency.

Intraoperative revision rates due to three-dimensional imaging in orthopedic trauma surgery: results of a case series of 4721 patients.

PURPOSE: Intraoperative 3D imaging has become a valued tool in assessing the quality of reduction and implant placement in orthopedic trauma surgery. In our institution, 3D imaging is used routinely since 2001. To evaluate the intraoperative findings and consequences of this technique, intraoperative revision rates in cases with 3D imaging were analyzed. METHODS: All operative procedures carried out with intraoperative 3D imaging between August 2001 and December 2016 were included. The scans were assessed intraoperatively and documented thereafter. In case of malreduction or misplaced implants, an immediate revision was performed. The number of scans per case as well as the findings and consequences drawn regarding the anatomical region were analyzed. RESULTS: 4721 cases with 7201 3D scans were included in this study. The most common anatomical regions were the ankle (22.3%), the calcaneus (14.8%) and the tibial head (9.5%). In 19.1% of all cases, an intraoperative revision was performed. The highest revision rates were found with 36.0% in calcaneal fractures, 24.8% in fractures of the tibial plateau, 22.3% in injuries of the ankle. In 52.0% of revisions, the reduction was improved regarding intra-articular steps or joint congruency. In 30.5% an implant was corrected. CONCLUSION: Intraoperative revision due to results of 3D imaging was performed in almost one-fifth of cases. This illustrates the improved possibilities to detect malreduction and implant misplacements intraoperatively and thus the abilities to improve surgical outcome. LEVEL OF EVIDENCE: III.

Vascular impulse technology versus elevation for reducing the swelling of upper and lower extremity joint fractures.

Soft-tissue conditioning due to posttraumatic oedema after complicated joint fractures is a central therapeutic aspect both pre- and postoperatively. On average, 6-10 days pass until the patient is suitable for surgery. This study compares the decongestant effect of vascular impulse technology (VIT) with that of conventional elevation. In this monocentric RCT, 68 patients with joint fractures of the upper (n = 36) and lower (n = 32) extremity were included and randomized after consent in a 1:1 ratio. Variables were evaluated for all fractures together and additionally subdivided into upper or lower extremity for better clinical comparability. Primary endpoint was the time in days from hospital admission to operability. Secondary endpoints were total length of stay, oedema reduction, pain intensity, complications, and revisions. The time from admission until operability was reduced by 1.4 (95% CI - 0.4; 3.1) days in the mITT analysis (p = 0.120) and was statistically significant with 1.7 (95% CI 0.1; 3.3) days in the as-treated sensitivity analysis (pAT = 0.038). Significantly less pain and a faster oedema reduction were found in the intervention group. Due to rare occurrences, nothing can be concluded regarding complications and revisions. Administration of VIT therapy did not lead to a significant reduction in time until operability in the whole population but was superior to elevation for soft-tissue conditioning and pain reduction. However, there was a significant reduction by 2.5 days (95% CI 0.7; 4.3) in the subgroup of lower extremity fractures. VIT therapy therefore seems to be a helpful tool in the treatment of posttraumatic oedema after complex joint fractures of the lower and upper extremity, especially in tibial head and lower leg fractures.

Effect of changing the acquisition trajectory of the 3D C-arm (CBCT) on image quality in spine surgery: experimental study using an artificial bone model.

BACKGROUND: Intraoperative 3D imaging using cone-beam CT (CBCT) provides improved assessment of implant position and reduction in spine surgery, is used for navigated surgical techniques, and therefore leads to improved quality of care. However, in some cases the image quality is not sufficient to correctly assess pedicle screw position and reduction, especially due to metal artifacts. The aim of this study was to investigate whether changing the acquisition trajectory of the CBCT in relation to the pedicle screw position during dorsal instrumentation of the spine can reduce metal artifacts and consequently improve image quality as well as clinical assessability on the artificial bone model. METHODS: An artificial bone model was instrumented with pedicle screws in the thoracic and lumbar spine region (Th10 to L5). Then, the acquisition trajectory of the CBCT (Cios Spin, Siemens, Germany) to the pedicle screws was systematically changed in 5° steps in angulation (- 30° to + 30°) and swivel (- 30° to + 30°). Subsequently, radiological evaluation was performed by three blinded, qualified raters on image quality using 9 questions (including anatomical structures, implant position, appearance of artifacts) with a score (1-5 points). For statistical evaluation, the image quality of the different acquisition trajectories was compared to the standard acquisition trajectory and checked for significant differences. RESULTS: The angulated acquisition trajectory increased the score for subjective image quality (p < 0.001) as well as the clinical assessability of pedicle screw position (p < 0.001) highly significant with particularly strong effects on subjective image quality in the vertebral pedicle region (d = 1.06). Swivel of the acquisition trajectory significantly improved all queried domains of subjective image quality (p < 0.001) as well as clinical assessability of pedicle screw position (p < 0.001). The data show that maximizing the angulation or swivel angle toward 30° provides the best tested subjective image quality. Angulation and swivel of the acquisition trajectory result in a clinically relevant improvement in image quality in intraoperative 3D imaging (CBCT) during dorsal instrumentation of the spine.

Multi-Stage Platform for (Semi-)Automatic Planning in Reconstructive Orthopedic Surgery.

Intricate lesions of the musculoskeletal system require reconstructive orthopedic surgery to restore the correct biomechanics. Careful pre-operative planning of the surgical steps on 2D image data is an essential tool to increase the precision and safety of these operations. However, the plan's effectiveness in the intra-operative workflow is challenged by unpredictable patient and device positioning and complex registration protocols. Here, we develop and analyze a multi-stage algorithm that combines deep learning-based anatomical feature detection and geometric post-processing to enable accurate pre- and intra-operative surgery planning on 2D X-ray images. The algorithm allows granular control over each element of the planning geometry, enabling real-time adjustments directly in the operating room (OR). In the method evaluation of three ligament reconstruction tasks effect on the knee joint, we found high spatial precision in drilling point localization (ε<2.9mm) and low angulation errors for k-wire instrumentation (ε<0.75∘) on 38 diagnostic radiographs. Comparable precision was demonstrated in 15 complex intra-operative trauma cases suffering from strong implant overlap and multi-anatomy exposure. Furthermore, we found that the diverse feature detection tasks can be efficiently solved with a multi-task network topology, improving precision over the single-task case. Our platform will help overcome the limitations of current clinical practice and foster surgical plan generation and adjustment directly in the OR, ultimately motivating the development of novel 2D planning guidelines.

Influence of unstable ankle fracture (type Weber C), osteosynthesis and syndesmotic transfixation on position of fibula in tibiofibular notch: a cadaveric study.

PURPOSE: The aim of the cadaveric study was to determine the effects of an unstable ankle fracture on the position of the fibula in the incisural notch and subsequently to evaluate the alterations resulting from the individual steps of a guideline-based osteosynthesis. METHODS: In a specimen model with 20 uninjured fresh-frozen lower legs with induced unstable fracture of the fibula (type Weber C), a guideline-based osteosynthesis was performed. The distances between the anterior and posterior edges of the tibia and fibula and in the center of the incisural notch, as well as the rotation angle of the fibula, were measured in the acquired 3D image data sets and were compared with the intact condition of the ankle mortise. RESULTS: The dissection of the syndesmosis and osteotomy of the fibula results in an external rotation the fibula by 3.6° (p = 0.000), while the distance between the anterior edge of the tibia and the fibula widens by 1.86 mm (p = 0.000). After osteosynthesis of the fibula and transfixation of the syndesmotic region using a positioning screw, the posterior distance is no longer substantially increased by 0.22 mm (p = 0.103) but also reduced by 0.1 mm (p = 0.104) in the tibiofibular notch. The external rotation of the fibula remains slightly increased by just 0.45° (p = 0.009). CONCLUSION: The results indicate that there is a tendency for over-compression when adjusting the tibiofibular distance and that the fibula in the tibiofibular notch tends to remain slightly rotated externally.

Influence of reduction quality on functional outcome and quality of life in the surgical treatment of tibial plateau fractures: A retrospective cohort study.

BACKGROUND: Despite a substantial improvement in the operative treatment of tibial plateau fractures, the surgical procedure remains controversial and is generally challenging, as patients may develop postoperative arthritis and functional impairment of the knee joint. HYPOTHESIS: In the surgical treatment of tibial plateau fractures the intraoperative reposition quality has the greatest influence on the postoperative outcome, whereby misalignments of≥2mm lead to a worse result. PATIENTS AND METHODS: Forty-one patients with tibial plateau fractures were postoperatively examined. The operative treatment was performed under reduction control using an intraoperative 3D C-arm. The follow-up collective was divided into two groups depending on the intraoperative reduction result. The postoperative results were then evaluated using the following parameters: Lysholm score, Rasmussen score, Tegner score, SF-36 score, range of motion and pain level. RESULTS: Group 1 (articular surface incongruencies<2mm) tended to achieve a better result in all scores than group 2 (articular surface incongruencies≥2mm), in the Lysholm score (p=0.039), in the comparison of the range of motion (p=0.012) and the pain level (p=0.039) this was significant. Group 1 achieved an average of 90.71 points (group 2: 78.74) in the Lysholm score. The average range of motion of the knee joint was 138.93° in group 1 (group 2: 127.78°). The average value of the current pain level in group 1 was 1.14 (group 2: 2.63). DISCUSSION: Both study groups achieved a very good result compared to the available literature. It appears that reduction quality - which can be analyzed with intraoperative 3D imaging - plays the most important role in postoperative quality of life and functional outcome. Intraoperative adjustments of the reduction should therefore be performed on joint surface irregularities with a size above 2mm. LEVEL OF EVIDENCE: III; retrospective case control study.

Vascular impulse technology versus elevation for the reduction of swelling of lower extremity joint fractures: results of a prospective randomized controlled study.

AIMS: Complex joint fractures of the lower extremity are often accompanied by soft-tissue swelling and are associated with prolonged hospitalization and soft-tissue complications. The aim of the study was to evaluate the effect of vascular impulse technology (VIT) on soft-tissue conditioning in comparison with conventional elevation. METHODS: A total of 100 patients were included in this prospective, randomized, controlled monocentre study allocated to the three subgroups of dislocated ankle fracture (n = 40), pilon fracture (n = 20), and intra-articular calcaneal fracture (n = 40). Patients were randomized to the two study groups in a 1:1 ratio. The effectiveness of VIT (intervention) compared with elevation (control) was analyzed separately for the whole study population and for the three subgroups. The primary endpoint was the time from admission until operability (in days). RESULTS: The mean length of time until operability was 8.2 days (SD 3.0) in the intervention group and 10.2 days (SD 3.7) in the control group across all three fractures groups combined (p = 0.004). An analysis of the subgroups revealed that a significant reduction in the time to operability was achieved in two of the three: with 8.6 days (SD 2.2) versus 10.6 days (SD 3.6) in ankle fractures (p = 0.043), 9.8 days (SD 4.1) versus 12.5 days (SD 5.1) in pilon fractures (p = 0.205), and 7.0 days (SD 2.6) versus 8.4 days (SD 1.5) in calcaneal fractures (p = 0.043). A lower length of stay (p = 0.007), a reduction in pain (ppreop = 0.05; pdischarge < 0.001) and need for narcotics (ppreop = 0.064; ppostop = 0.072), an increased reduction in swelling (p < 0.001), and a lower revision rate (p = 0.044) could also be seen, and a trend towards fewer complications (p = 0.216) became apparent. CONCLUSION: Compared with elevation, VIT results in a significant reduction in the time to achieve operability in complex joint fractures of the lower limb. Cite this article: Bone Joint J 2021;103-B(4):746-754.

A standardised computed tomography measurement method for distal fibular rotation.

PURPOSE: The aim of the study is to identify an ideal location to measure fibular rotation in the ankle joint using axial computed tomography (CT) scans. Another objective was to detect the average fibular rotation in the uninjured ankle joint in a large cohort. METHODS: Standardised axial CT with coronal/sagittal reconstructions was performed in healthy ankle joints. Three investigators performed the measurements. In the axial view, each investigator appointed the ideal location to measure the angle of fibular rotation with the use of reference lines either 4, 6, 8 or 10 mm distal from the talar joint line. Inter- and intraobserver reliability, as well as the intraclass correlation coefficient, were determined. RESULTS: CT scans of one hundred individuals-78 males and 22 females-were analysed. The most common locations for measuring the fibular rotation were in 31% of cases 4 mm and in 51% of cases 6 mm distal the talar joint line. The external rotation of the fibula averaged 8.42° ± 4.86° (range 0°-26°). The intraclass coefficient correlations (ICC) for interrater and intrarater reliability were 0.75. CONCLUSIONS: The results of the study demonstrate a reproducible location to measure the fibular rotation in the ankle joint. The most convenient location to measure fibular rotation with a high reliability was 6 mm distal to the talar joint line.

Validation of radiological reduction criteria with intraoperative cone beam CT in unstable syndesmotic injuries.

PURPOSE: Acute unstable syndesmotic lesions are regularly treated with closed or open reduction and fixation with either a positioning screw or tight rope. Conventional fluoroscopy is limited to identify a malreduction of the ankle mortise. The aim of the study was to validate the reduction criteria of intraoperative cone beam CT in unstable syndesmotic injuries by analyzing the clinical outcome. METHODS: Acute unstable syndesmotic injuries were treated with a positioning screw fixation, and the reduction in the ankle mortise was evaluated with intraoperative cone beam CT. The patients were grouped postoperatively according to the radiological reduction criteria in the intraoperative 3D images. The reduction criteria were unknown to the surgeons. Malreduction was assumed if one or more reduction criteria were not fulfilled. RESULTS: Seventy-three of the 127 patients could be included in the study (follow-up rate 57.5%). For 41 patients (56.2%), a radiological optimal reduction was achieved (Group 1), and in 32 patients (43.8%) a radiological adverse reduction was found (Group 2). Group 1 scored significantly higher in the Olerud/Molander score (92.44 ± 10.73 vs. 65.47 ± 28.77) (p = 0.003), revealed a significantly higher range of motion (ROM) (53.44 vs. 24.17°) (p = 0.001) and a significantly reduced Kellgren/Lawrence osteoarthritis score (1.24 vs. 1.79) (p = 0.029). The linear regression analysis revealed a correlation for the two groups with the values scored in the Olerud/Molander score (p < 0.01). CONCLUSION: The reduction criteria in intraoperative cone beam CT applied to unstable syndesmotic injuries could be validated. Patients with an anatomic reduced acute unstable syndesmotic injury according to the criteria have a significantly better clinical outcome.