One-Dimensional Crystal-Structure Te-Se Alloy for Flexible Shortwave Infrared Photodetector and Imaging.

Flexible shortwave infrared detectors play a crucial role in wearable devices, bioimaging, automatic control, etc. Commercial shortwave infrared detectors face challenges in achieving flexibility due to the high fabrication temperature and rigid material properties. Herein, we develop a high-performance flexible Te0.7Se0.3 photodetector, resulting from the unique 1D crystal structure and small elastic modulus of Te-Se alloying. The flexible photodetector exhibits a broad-spectrum response ranging from 365 to 1650 nm, a fast response time of 6 µs, a broad linear dynamic range of 76 dB, and a specific detectivity of 4.8 × 1010 Jones at room temperature. The responsivity of the flexible detector remains at 93% of its initial value after bending with a small curvature of 3 mm. Based on the optimized flexible detector, we demonstrate its application in shortwave infrared imaging. These results showcase the great potential of Te0.7Se0.3 photodetectors for flexible electronics.

Pancreatic Acinar Cells-Derived Sphingosine-1-Phosphate Contributes to Fibrosis of Chronic Pancreatitis via Inducing Autophagy and Activation of Pancreatic Stellate Cells.

BACKGROUND & AIMS: Studies have demonstrated that activated pancreatic stellate cells (PSCs) play a crucial role in pancreatic fibrogenesis in chronic pancreatitis (CP); however, the precise mechanism for PSCs activation has not been fully elucidated. We analyzed the role of injured pancreatic acinar cells (iPACs) in the activation of PSCs of CP. METHODS: Sphingosine kinase 1 (SPHK1)/sphingosine-1-phosphate (S1P) signaling was evaluated in experimental CP induced by cerulein injection or pancreatic duct ligation, as well as in PACs injured by cholecystokinin. The activation of PSCs and pancreatic fibrosis in CP samples was evaluated by immunohistochemical and immunofluorescence analyses. In vitro coculture assay of iPACs and PSCs was created to evaluate the effect of the SPHK1/S1P pathway and S1P receptor 2 (SIPR2) on autophagy and activation of PSCs. The pathogenesis of CP was assessed in SPHK1-/- mice or PACs-specific SPHK1-knockdown mice with recombinant adeno-associated virus serotypes 9-SPHK1-knockdown, as well as in mice treated with inhibitor of SPHK1 and S1P receptor 2 (S1PR2). RESULTS: SPHK1/S1P was remarkably increased in iPACs and acinar cells in pancreatic tissues of CP mice. Meanwhile, the pathogenesis, fibrosis, and PSCs activation of CP was significantly prevented in SPHK1-/- mice and recombinant adeno-associated virus serotypes 9-SPHK1-knockdown mice. Meanwhile, iPACs obviously activated PSCs, which was prevented by SPHK1 knockdown in iPACs. Moreover, iPACs-derived S1P specifically combined to S1PR2 of PSCs, by which modulated 5' adenosine monophosphate-activated protein kinase/mechanistic target of rapamycin pathway and consequently induced autophagy and activation of PSCs. Furthermore, hypoxia-inducible factor 1-α and -2α promoted SPHK1 transcription of PACs under hypoxia conditions, which is a distinct characteristic of the CP microenvironment. Coincidently, inhibition of SPHK1 and S1PR2 activity with inhibitor PF-543 and JTE-013 obviously impeded pancreatic fibrogenesis of CP mice. CONCLUSIONS: The activated SPHK1/S1P pathway in iPACs induces autophagy and activation of PSCs by regulating the S1PR2/5' adenosine monophosphate-activated protein kinase/mammalian target of rapamycin pathway, which promotes fibrogenesis of CP. The hypoxia microenvironment might contribute to the cross talk between PACs and PSCs in pathogenesis of CP.

Insight into the High Mobility and Stability of In2 O3 :H Film.

Wide bandgap semiconductors, particularly In2 O3 :Sn (ITO), are widely used as transparent conductive electrodes in optoelectronic devices. Nevertheless, due to the strohave beenng scattering probability of high-concentration oxygen vacancy (VO ) defects, the mobility of ITO is always lower than 40 cm2  V-1  s-1 . Recently, hydrogen-doped In2 O3 (In2 O3 :H) films have been proven to have high mobility (>100 cm2  V-1  s-1 ), but the origin of this high mobility is still unclear. Herein, a high-resolution electron microscope and theoretical calculations are employed to investigate the atomic-scale mechanisms behind the high carrier mobility in In2 O3 :H films. It is found that VO can cause strong lattice distortion and large carrier scattering probability, resulting in low carrier mobility. Furthermore, hydrogen doping can simultaneously reduce the concentration of VO , which accounts for high carrier mobility. The thermal stability and acid-base corrosion mechanism of the In2 O3 :H film are investigated and found that hydrogen overflows from the film at high temperatures (>250 °C), while acidic or alkaline environments can cause damage to the In2 O3 grains themselves. Overall, this work provides insights into the essential reasons for high carrier mobility in In2 O3 :H and presents a new research approach to the doping and stability mechanisms of transparent conductive oxides.

(Bi,Sb)2 Se3 Alloy Thin Film for Short-Wavelength Infrared Photodetector and TFT Monolithic-Integrated Matrix Imaging.

Short-wavelength infrared photodetectors play a significant role in various fields such as autonomous driving, military security, and biological medicine. However, state-of-the-art short-wavelength infrared photodetectors, such as InGaAs, require high-temperature fabrication and heterogenous integration with complementary metal-oxide-semiconductor (CMOS) readout circuits (ROIC), resulting in a high cost and low imaging resolution. Herein, for the first time, a low-cost, high-performance, high-stable, and thin-film transistor (TFT) ROIC monolithic-integrated (Bi,Sb)2 Se3 alloy thin-film short-wavelength infrared photodetector is reported. The (Bi,Sb)2 Se3 alloy thin-film short-wavelength infrared photodetectors demonstrate a high external quantum efficiency (EQE) of 21.1% (light intensity of 0.76 µW cm-2 ) and a fast response time (3.24 µs). The highest EQE is about two magnitudes than that of the extrinsic photoconduction of Sb2 Se3 (0.051%). In addition, the unpackaged devices demonstrate high electric and thermal stability (almost no attenuation at 120 °C for 312 h), showing potential for in-vehicle applications that may experient such a high temperature. Finally, both the (Bi,Sb)2 Se3 alloy thin film and n-type CdSe buffer layer are directly deposited on the TFT ROIC (with a 64 × 64-pixel array) with a low-temperature process and the material identification and imaging applications are presented. This work is a significant breakthrough in ROIC monolithic-integrated short-wavelength infrared imaging chips.

π-π Stacking at the Perovskite/C60 Interface Enables High-Efficiency Wide-Bandgap Perovskite Solar Cells.

Interface passivation is a key method for improving the efficiency of perovskite solar cells, and 2D/3D perovskite heterojunction is the mainstream passivation strategy. However, the passivation layer also produces a new interface between 2D perovskite and fullerene (C60), and the properties of this interface have received little attention before. Here, the underlying properties of the 2D perovskite/C60 interface by taking the 2D TEA2PbX4 (TEA = C6H10NS; X = I, Br, Cl) passivator as an example are systematically expounded. It is found that the 2D perovskite preferentially exhibits (002) orientation with the outermost surface featuring an oriented arrangement of TEACl, where the thiophene groups face outward. The outward thiophene groups further form a strong π-π stacking system with C60 molecule, strengthening the interaction force with C60 and facilitating the creation of a superior interface. Based on the vacuum-assisted blade coating, wide-bandgap (WBG, 1.77 eV) perovskite solar cells achieved impressive records of 19.28% (0.09 cm2) and 18.08% (1.0 cm2) inefficiency, respectively. This research not only provides a new understanding of interface processing for future perovskite solar cells but also lays a solid foundation for realizing efficient large-area devices.

Quantum ghost imaging of a vector field.

Quantum ghost image technique utilizing position or momentum correlations between entangled photons can realize nonlocal reconstruction of the image of an object. In this work, based on polarization entanglement, we experimentally demonstrate quantum ghost imaging of vector images by using a geometric phase object. We also provide a corresponding theoretical analysis. Additionally, we offer a geometrical optics path explanation of ghost imaging for vector fields. The proposed strategy offers new insights into the fundamental development of ghost imaging and also holds great promise for developing complex structured ghost imaging techniques. Our work expanding the principle of ghost imaging to spatially varying vector beams will lead to interesting developments of this field.

Inubritantrimers A-D: Trimerized Sesquiterpenoid [4 + 2] Adducts Featuring a Distinctive Spiro-Polycyclic Scaffold from Inula britannica.

Inubritantrimer A (1), a trace trimerized sesquiterpenoid [4 + 2] adduct featuring an unusual exo-exo type spiro-polycyclic scaffold, together with three new endo-exo [4 + 2] adducts, inubritantrimers B-D (2-4), were discovered from the flowers of Inula britannica. Their structures were elucidated using 1D/2D NMR, X-ray diffraction, and ECD approaches. 1 is characterized as a novel exo-exo trimer, synthesized biogenetically from three sesquiterpenoid monomers, featuring a unique linkage of C-11/C-1', C-13/C-3' and C-13'/C-3″, C-11'/C-1″ through a two-step exo [4 + 2] cycloaddition process. Compounds 1-4 exhibited modest cytotoxicity against breast cancer cells with IC50 values in the range of 5.84-12.01 µM.

Emerging Chalcogenide Thin Films for Solar Energy Harvesting Devices.

Chalcogenide semiconductors offer excellent optoelectronic properties for their use in solar cells, exemplified by the commercialization of Cu(In,Ga)Se2- and CdTe-based photovoltaic technologies. Recently, several other chalcogenides have emerged as promising photoabsorbers for energy harvesting through the conversion of solar energy to electricity and fuels. The goal of this review is to summarize the development of emerging binary (Sb2X3, GeX, SnX), ternary (Cu2SnX3, Cu2GeX3, CuSbX2, AgBiX2), and quaternary (Cu2ZnSnX4, Ag2ZnSnX4, Cu2CdSnX4, Cu2ZnGeX4, Cu2BaSnX4) chalcogenides (X denotes S/Se), focusing especially on the comparative analysis of their optoelectronic performance metrics, electronic band structure, and point defect characteristics. The performance limiting factors of these photoabsorbers are discussed, together with suggestions for further improvement. Several relatively unexplored classes of chalcogenide compounds (such as chalcogenide perovskites, bichalcogenides, etc.) are highlighted, based on promising early reports on their optoelectronic properties. Finally, pathways for practical applications of emerging chalcogenides in solar energy harvesting are discussed against the backdrop of a market dominated by Si-based solar cells.

Efficient and stable emission of warm-white light from lead-free halide double perovskites.

Lighting accounts for one-fifth of global electricity consumption1. Single materials with efficient and stable white-light emission are ideal for lighting applications, but photon emission covering the entire visible spectrum is difficult to achieve using a single material. Metal halide perovskites have outstanding emission properties2,3; however, the best-performing materials of this type contain lead and have unsatisfactory stability. Here we report a lead-free double perovskite that exhibits efficient and stable white-light emission via self-trapped excitons that originate from the Jahn-Teller distortion of the AgCl6 octahedron in the excited state. By alloying sodium cations into Cs2AgInCl6, we break the dark transition (the inversion-symmetry-induced parity-forbidden transition) by manipulating the parity of the wavefunction of the self-trapped exciton and reduce the electronic dimensionality of the semiconductor4. This leads to an increase in photoluminescence efficiency by three orders of magnitude compared to pure Cs2AgInCl6. The optimally alloyed Cs2(Ag0.60Na0.40)InCl6 with 0.04 per cent bismuth doping emits warm-white light with 86 ± 5 per cent quantum efficiency and works for over 1,000 hours. We anticipate that these results will stimulate research on single-emitter-based white-light-emitting phosphors and diodes for next-generation lighting and display technologies.

High-Performance and Stable Colloidal Quantum Dots Imager via Energy Band Engineering.

Solution-processed colloidal quantum dot (CQD) photodiodes are compatible for monolithic integration with silicon-based readout circuitry, enabling ultrahigh resolution and ultralow cost infrared imagers. However, top-illuminated CQD photodiodes for longer infrared imaging suffer from mismatched energy band alignment between narrow-bandgap CQDs and the electron transport layer. In this work, we designed a new top-illuminated structure by replacing the sputtered ZnO layer with a SnO2 layer by atomic layer deposition. Benefiting from matched energy band alignment and improved heterogeneous interface, our top-illuminated CQD photodiodes achieve a broad-band response up to 1650 nm. At 220 K, these SnO2-based devices exhibit an ultralow dark current density of 3.5 nA cm-2 at -10 mV, reaching the noise limit for passive night vision. The detectivity is 4.1 × 1012 Jones at 1530 nm. These SnO2-based devices also demonstrate exceptional operation stability. By integrating with silicon-based readout circuitry, our CQD imager realizes water/oil discrimination and see-through smoke imaging.

Vacuum-deposited Rb3CeI6 for deep-blue-light-emitting diodes.

Recently, perovskite light-emitting diodes (PeLEDs) have exhibited outstanding performance in next-generation high-definition display applications. However, compared with green and red PeLEDs, the development of efficient and stable blue PeLEDs to meet the requirement for a wide color gamut has been a challenge. Herein, we vacuum thermally deposited a film of the lead-free rare earth halide Rb3CeI6, which shows deep blue emission with peaks at 427 nm and 468 nm. Due to the parity-allowed 5d-4f transition of Ce(III), the excited-state lifetime is as short as 22.3 ns (427 nm) and 25 ns (468 nm), respectively. The photoluminescence quantum yield (PLQY) is optimized to 51% by regulating the nucleation and growth of Rb3CeI6 grains. In a prototype rare earth light-emitting diode (ReLED) device, a thin insulating Al2O3 layer (5 nm) is inserted between the electron transport layer (ETL) and the emitting layer (EML, Rb3CeI6) to balance the carriers and reduce the dark current. The device shows a maximum luminance and EQE of 98 cd m-2 and 0.67%, respectively, and the electroluminescence (EL) spectrum maintains stability with changes in the operating voltage. In addition, the corresponding CIE coordinate is (0.15, 0.06), which closely matches the Rec. 2020 standard (0.131, 0.046).

Trienomycin A-simplified analogs: Synthesis and anti-neuroinflammatory activity.

A series of novel trienomycin A (TA)-mimetic compounds (5a-p) have been designed, synthesized, and evaluated for their in vitro anti-neuroinflammatory and neuroprotective activities. Among them, compounds 5h, 5n, and 5o exhibits relatively strong NO inhibitory activity in LPS-activated BV-2 cells with the EC50 values of 12.4, 17.3, and 8.9 µM, respectively. Moreover, 5h showed evidently neuroprotective effect against H2O2-induced PC-12 cells without cytotoxicity at 20 µM. Overall, these compounds can provide a better understanding of the structure-activity relationship of TA and furnish research ideas for anti-neuroinflammatory and neuroprotective agents.

Ligand-Engineered HgTe Colloidal Quantum Dot Solids for Infrared Photodetectors.

HgTe colloidal quantum dots (CQDs) are promising absorber systems for infrared detection due to their widely tunable photoresponse in all infrared regions. Up to now, the best-performing HgTe CQD photodetectors have relied on using aggregated CQDs, limiting the device design, uniformity and performance. Herein, we report a ligand-engineered approach that produces well-separated HgTe CQDs. The present strategy first employs strong-binding alkyl thioalcohol ligands to enable the synthesis of well-dispersed HgTe cores, followed by a second growth process and a final postligand modification step enhancing their colloidal stability. We demonstrate highly monodisperse HgTe CQDs in a wide size range, from 4.2 to 15.0 nm with sharp excitonic absorption fully covering short- and midwave infrared regions, together with a record electron mobility of up to 18.4 cm2 V-1 s-1. The photodetectors show a room-temperature detectivity of 3.9 × 1011 jones at a 1.7 µm cutoff absorption edge.

Atomic Metal-Support Interaction Enables Reconstruction-Free Dual-Site Electrocatalyst.

Real bifunctional electrocatalysts for hydrogen evolution reaction and oxygen evolution reaction have to be the ones that exhibit a steady configuration during/after reaction without irreversible structural transformation or surface reconstruction. Otherwise, they can be termed as "precatalysts" rather than real catalysts. Herein, through a strongly atomic metal-support interaction, single-atom dispersed catalysts decorating atomically dispersed Ru onto a nickel-vanadium layered double hydroxide (LDH) scaffold can exhibit excellent HER and OER activities. Both in situ X-ray absorption spectroscopy and operando Raman spectroscopic investigation clarify that the presence of atomic Ru on the surface of nickel-vanadium LDH is playing an imperative role in stabilizing the dangling bond-rich surface and further leads to a reconstruction-free surface. Through strong metal-support interaction provided by nickel-vanadium LDH, the significant interplay can stabilize the reactive atomic Ru site to reach a small fluctuation in oxidation state toward cathodic HER without reconstruction, while the atomic Ru site can stabilize the Ni site to have a greater structural tolerance toward both the bond constriction and structural distortion caused by oxidizing the Ni site during anodic OER and boost the oxidation state increase in the Ni site that contributes to its superior OER performance. Unlike numerous bifunctional catalysts that have suffered from the structural reconstruction/transformation for adapting the HER/OER cycles, the proposed Ru/Ni3V-LDH is characteristic of steady dual reactive sites with the presence of a strong metal-support interaction (i.e., Ru and Ni sites) for individual catalysis in water splitting and is revealed to be termed as a real bifunctional electrocatalyst.

Picrotoxane sesquiterpenoids: chemistry, chemo- and bio-syntheses and biological activities.

Covering: up to December 2021Picrotoxane sesquiterpenoids are a special category of natural products known to have a picrotoxane skeleton and are characterised by a highly oxidised cis-hydrindene core, lactone rings, and epoxide functionalities. Ever since the first picrotoxane was isolated from Menispermum cocculus in the early 19th century, these compounds have long attracted the attention of natural product chemists, synthetic chemists, and pharmacologists for their particular structures and powerful biological activities. This review extensively summarizes a total of 132 naturally occurring picrotoxane sesquiterpenoids, taking into account their distributions, structural classifications, chemical and bio-synthetic researches, and bioactivities. It provides a comprehensive and in-depth perspective for further investigation on picrotoxane sesquiterpenoids.

Phase-Transfer Exchange Lead Chalcogenide Colloidal Quantum Dots: Ink Preparation, Film Assembly, and Solar Cell Construction.

Solution-processed colloidal quantum dots (CQDs) are promising candidates for the third-generation photovoltaics due to their low cost and spectral tunability. The development of CQD solar cells mainly relies on high-quality CQD ink, smooth and dense film, and charge-extraction-favored device architectures. In particular, advances in the processing of CQDs are essential for high-quality QD solids. The phase transfer exchange (PTE), in contrast with traditional solid-state ligand exchange, has demonstrated to be the most promising approach for high-quality QD solids in terms of charge transport and defect passivation. As a result, the efficiencies of Pb chalcogenide CQD solar cells have been rapidly improved to 14.0%. In this review, the development of the PTE method is briefly reviewed for lead chalcogenide CQD ink preparation, film assembly, and device construction. Particularly, the key roles of lead halides and additional additives are emphasized for defect passivation and charge transport improvement. In the end, several potential directions for future research are proposed.

Matching Charge Extraction Contact for Infrared PbS Colloidal Quantum Dot Solar Cells.

Infrared solar cells (IRSCs) can supplement silicon or perovskite SCs to broaden the utilization of the solar spectrum. As an ideal infrared photovoltaic material, PbS colloidal quantum dots (CQDs) with tunable bandgaps can make good use of solar energy, especially the infrared region. However, as the QD size increases, the energy level shrinking and surface facet evolution makes us reconsider the matching charge extraction contacts and the QD passivation strategy. Herein, different to the traditional sol-gel ZnO layer, energy-level aligned ZnO thin film from a magnetron sputtering method is adopted for electron extraction. In addition, a modified hybrid ligand recipe is developed for the facet passivation of large size QDs. As a result, the champion IRSC delivers an open circuit voltage of 0.49 V and a power conversion efficiency (PCE) of 10.47% under AM1.5 full-spectrum illumination, and the certified PCE is over 10%. Especially the 1100 nm filtered efficiency achieves 1.23%. The obtained devices also show high storage stability. The present matched electron extraction and QD passivation strategies are expected to highly booster the IR conversion yield and promote the fast development of new conception QD optoelectronics.

Efficient Near-Infrared PbS Quantum Dot Solar Cells Employing Hydrogenated In2 O3 Transparent Electrode.

Infrared solar cells are regarded as candidates for expanding the solar spectrum of c-Si cells, and the window electrodes are usually transparent conductive oxide (TCO) such as widely used indium tin oxide material. However, due to the low transmittance of the TCO in the near-infrared region, most near-infrared light cannot penetrate the electrode and be absorbed by the active layer. Here, the propose a simple procedure to fabricate the window materials with high near-infrared transmittance and high electrical conductivity, namely the hydrogen-doped indium oxide (IHO) films prepared by room temperature magnetron sputtering. The low-temperature annealed IHO conductive electrodes exhibit high mobility of 98 cm2 V-1 s-1 and high infrared transmittance of 85.2% at 1300 nm, which endows the lead quantum dot infrared solar cell with an improved short-circuit current density of 37.2 mA cm-2 and external quantum efficiency of 70.22% at 1280 nm. The proposed preparation process is simple and compatible with existing production lines, which gifts the IHO transparent conductive film great potential in broad applications that simultaneously require high infrared transmittance and high conductivity.

Cation-Exchange Enables In Situ Preparation of PbSe Quantum Dot Ink for High Performance Solar Cells.

Lead selenide (PbSe) colloidal quantum dots (CQDs) are promising candidates for optoelectronic applications. To date, PbSe CQDs capped by halide ligands exhibit improved stability and solar cells using these CQDs as active layers have reported a remarkable power conversion efficiency (PCE) up to 10%. However, PbSe CQDs are more prone to oxidation, requiring delicate control over their processability and compromising their applications. Herein, an efficient strategy that addresses this issue by an in situ cation-exchange process is reported. This is achieved by a two-phase ligand exchange process where PbI2 serves as both a passivating ligand and cation-source inducing transformation of CdSe to PbSe. The defect density and carrier lifetime of PbSe CQD films are improved to 1.05 × 1016  cm-3 and 12.2 ns, whereas the traditional PbSe CQD films possess 1.9 × 1016  cm-3 defect density and 10.2 ns carrier lifetime. These improvements are translated into an enhancement of photovoltaic performance of PbSe solar cells, with a PCE of up to 11.6%, ≈10% higher than the previous record. Notably, the approach enables greatly improved stability and a two-month stability is successfully demonstrated. This strategy is expected to promote the fast development of PbSe CQD applications in low-cost and high-performance optoelectronic devices.

Rational Regulation of Reaction Specificity of Nitrilase for Efficient Biosynthesis of 2-Chloronicotinic Acid through a Single Site Mutation.

Nitrilase-catalyzed hydrolysis of 2-chloronicotinonitrile (2-CN) is a promising approach for the efficient synthesis of 2-chloronicotinic acid (2-CA). The development of nitrilase with ideal catalytic properties is crucial for the biosynthetic route with industrial potential. Herein, a nitrilase from Rhodococcus zopfii (RzNIT), which showed much higher hydration activity than hydrolysis activity, was designed for efficient hydrolysis of 2-CN. Two residues (N165 and W167) significantly affecting the reaction specificity were precisely identified. By tuning these two residues, a single mutation of W167G with abolished hydration activity and 20-fold improved hydrolysis activity was obtained. Molecular dynamics simulation and molecular docking revealed that the mutation generated a larger binding pocket, causing the substrate 2-CN to bind more deeply in the pocket and form a delocalized π bond between the residues W190 and Y196, which reduced the negative influence of steric hindrance and electron effect caused by chlorine substituent. With mutant W167G as biocatalyst, 100 mM 2-CN was exclusively converted into 2-CA within 16 h. The study provides useful guidance in nitrilase engineering for simultaneous improvement of reaction specificity and catalytic activity, which are highly desirable in value-added carboxylic acids production from nitriles hydrolysis. IMPORTANCE 2-CA is an important building block for agrochemicals and pharmaceuticals with a rapid increase in demand in recent years. It is currently manufactured from 3-cyanopyridine by chemical methods. However, during the final step of 2-CN hydrolysis under high temperature and strong alkaline conditions, the byproduct 2-CM was generated except for the target product, leading to low yield and tedious separation steps. Nitrilase-mediated hydrolysis is regarded as a promising alternative for 2-CA production, which proceeded under mild conditions. Nevertheless, nitrilase capable of efficient hydrolysis of 2-CN has not been reported because the enzymes showed either extremely low activity or surprisingly high hydration activity toward 2-CN. Herein, the reaction specificity of RzNIT was precisely tuned through a single site mutation. The mutant exhibited remarkably enhanced hydrolysis activity without the formation of byproducts, providing a robust biocatalyst for 2-CA biosynthesis with industrial potential.