MXene-Bimetallic Hybrids via Mixed Molten Salts Etching for Kinetics-Enhanced and Dendrite-Free Lithium-Sulfur Batteries.

Lithium-sulfur (Li-S) batteries with high theoretical energy density (2600 Wh kg-1) are considered to be one of the most promising secondary batteries. However, the practical application of Li-S batteries is limited by the polysulfides shuttling and unstable lithium metal anodes. Herein, an asymmetric separator (CACNM@PP), composed of Co-Ni/MXene (CNM) on the cathode and Cu-Ag/MXene (CAM) on the anode for high-performance Li-S batteries is reported. For the cathode, CNM provides a synergistic effect by integrating Co, Ni, and MXene, resulting in strong chemical interactions and fast conversion kinetics for polysulfides. For the anode, CAM with abundant lithiophilicity active sites can lower the nucleation barrier of Li. Moreover, LiCl/LiF layers are generated in situ as an ion conductor layer during charging and discharging, inducing a uniform deposition of Li. Therefore, the assembled cells with the CACNM@PP separators harvest excellent electrochemical performance. This work provides novel insights into the development of commercially available high-energy density Li-S batteries with asymmetric separators.

In Situ Construction of (NiCo)3Se4 Nanobeads Embedded in N-Doped Carbon 3D Interconnected Networks for Enhanced Sodium Storage.

Transition metal selenides, boasting remarkable specific capacity, have emerged as a promising electrode material. However, the substantial volume fluctuations during sodium ion insertion and extraction result in inadequate cyclic stability and rate performance, impeding their practical utility. Here, we synthesized N-doped carbon three-dimensional (3D) interconnected networks encapsulating (NiCo)3Se4 nanoparticles, denoted as ((NiCo)3Se4/N-C), exhibiting a bead-like structure and carbon confinement through electrospinning and subsequent thermal treatment. The N-doped carbon 3D interconnected networks possess high porosity and ample volume buffering capacity, enhance conductivity, shorten ion diffusion paths, and mitigate mechanical stress induced by volume changes during cycling. The uniformly distributed (NiCo)3Se4 nanoparticles, featuring a stable structure, demonstrate rapid electrochemical kinetics and numerous available active sites. The distinctive structure and composition of the optimized (NiCo)3Se4/N-C material showcase a high specific capacity (656.2 mAh g-1 at 0.1 A g-1) and an outstanding rate capability. A kinetic analysis confirms that (NiCo)3Se4/N-C stimulates the pseudocapacitive Na+ storage mechanism with capacitance contributing up to 89.2% of the total capacity. This unique structure design and doping approach provide new insights into the design of electrode materials for high-performance batteries.

NiO/RuO2 p-n Heterojunction Nanofoam as a High-Performance Electrocatalyst for Desulfurization and Concurrent Hydrogen Evolution.

The development of bifunctional electrocatalysts with excellent performance in both the hydrogen evolution reaction (HER) and sulfide oxidation reaction (SOR) remains a formidable challenge. Herein, we experimentally synthesize a NiO/RuO2 p-n heterojunction nanofoam that exhibits highly desirable electrocatalytic properties for both the HER and the SOR. We further design an electrolytic cell by pairing alkaline HER with SOR utilizing the NiO/RuO2 heterojunction nanofoam as both the anode and the cathode, which demands a low applied voltage of 0.846 V to achieve a current density of 10 mA cm-2. Density functional theory calculations confirm that the formation of the NiO/RuO2 p-n heterojunction nanofoam effectively regulates the electronic structure, thereby boosting the electrocatalytic performances for both HER and SOR. This work not only provides a novel strategy to prepare an efficient and stable nanofoam electrocatalyst for hydrogen production but also highlights the potential application of oxide heterojunction electrocatalysts in treating sulfur-containing waste liquid.

Calcium-Salt-Enhanced Fiber Membrane with High Infrared Emission and Hydrophilicity for Efficient Passive Cooling.

Radiative cooling fabrics have gained significant attention for their ability to enhance comfort without consuming extra energy. Nevertheless, sweat accumulation on the skin and diminishing cooling efficiency usually exist in the reported polymer cooling membranes. Herein, we report a universal method to obtain a calcium (Ca)-salt-enhanced fiber membrane with high infrared emission and hydrophilicity for efficient passive cooling and flame retardancy. The modification by Ca salts (including CaSiO3, CaSO3, and CaHPO4) with strong infrared emission results in an improvement in hygrothermal management ability, especially for moisture absorption and perspiration regulation in hot and humid environments. As an example, the CaSiO3@PMMA fiber membrane exhibits exceptional reflectivity in the solar spectrum (∼94.5%), high emittance in the atmospheric window (∼96.7%), and superhydrophilicity with a contact angle of 31°. Under direct sunlight, the CaSiO3@PMMA membrane exhibits an obvious temperature drop of 11.7 °C and moisture management achieves an additional cooling of 8.9 °C, as further confirmed by the ability to reduce the rate of ice melting. Additionally, the composite membrane provides notable flame retardancy and UV resistance. This work paves a new path in developing new materials with perspiration management and flame retardancy for zero energy consumption cooling in hot and humid environments.

Bioinspired Polymer Films with Surface Ordered Pyramid Arrays and 3D Hierarchical Pores for Enhanced Passive Radiative Cooling.

Passive radiative cooling (PRC) has been acknowledged to be an environmentally friendly cooling technique, and especially artificial photonic materials with manipulating light-matter interaction ability are more favorable for PRC. However, scalable production of radiative cooling materials with advanced biologically inspired structures, fascinating properties, and high throughput is still challenging. Herein, we reported a bioinspired design combining surface ordered pyramid arrays and internal three-dimensional hierarchical pores for highly efficient PRC based on mimicking natural photonic structures of the white beetle Cyphochilus' wings. The biological photonic film consisting of surface ordered pyramid arrays with a bottom side length of 4 µm together with amounts of internal nano- and micropores was fabricated by using scalable phase separation and a quick hot-pressing process. Optimization of pore structures and surface-enhanced photonic arrays enables the bioinspired film to possess an average solar reflectance of ∼98% and a high infrared emissivity of ∼96%. A temperature drop of ∼8.8 °C below the ambient temperature is recorded in the daytime. Besides the notable PRC capability, the bioinspired film exhibits excellent flexibility, strong mechanical strength, and hydrophobicity; therefore, it can be applied in many complex outdoor scenarios. This work provides a highly efficient and mold replication-like route to develop highly efficient passive cooling devices.

Cu-Doped Spherical P2-Type Na0.7Fe0.23-xCuxMn0.77O2 Cathode for High-Performance Sodium-Ion Batteries.

Sodium-ion batteries (SIBs), owing to their abundant resources and cost-effectiveness, have garnered considerable interest in the realm of large-scale energy storage. The properties of cathode materials profoundly affect the cycle stability and specific capacity of batteries. Herein, a series of Cu-doped spherical P2-type Na0.7Fe0.23-xCuxMn0.77O2 (x = 0, 0.05, 0.09, and 0.14, x-NFCMO) was fabricated using a convenient hydrothermal method. The successful doping of Cu efficaciously mitigated the Jahn-Teller effect, augmented the electrical conductivity of the material, and diminished the resistance to charge transfer. The distinctive spherical structure remained stable and withstood considerable volumetric strain, thereby improving the cyclic stability of the material. The optimized 0.09-NFCMO cathode exhibited a high specific capacity of 168.6 mAh g-1 at 100 mA g-1, a superior rate capability (90.9 mAh g-1 at 2000 mA g-1), and a good cycling stability. This unique structure design and doping approach provides new insights into the design of advanced electrode materials for sodium-ion batteries.

Integrating Lithium Sulfide as a Single Ionic Conductor Interphase for Stable All-Solid-State Lithium-Sulfur Batteries.

As a very prospective solid-state electrolyte, Li10GeP2S12 (LGPS) exhibits high ionic conductivity comparable to liquid electrolytes. However, severe self-decomposition and Li dendrite propagation of LGPS will be triggered due to the thermodynamic incompatibility with Li metal anode. Herein, by adopting a facile chemical vapor deposition method, an artificial solid electrolyte interphase composed of Li2S is proposed as a single ionic conductor to promote the interface stability of LGPS toward Li. The good electronic insulation coupled with ionic conduction property of Li2S effectively blocks electron transfer from Li to LGPS while enabling smooth passage of Li ions. Meanwhile, the generated Li2S layer remains good interface compatibility with LGPS, which is verified by the stable Li-plating/stripping operation for over 500 h at 0.15 mA cm-2. Consequently, the all-solid-state Li-S batteries (ASSLSBs) with a Li2S layer demonstrate superb capacity retention of 90.8% at 0.2 mA cm-2 after 100 cycles. Even at the harsh condition of 90 °C, the cell can deliver a high reversible capacity of 1318.8 mAh g-1 with decent capacity retention of 88.6% after 100 cycles. This approach offers a new insight for interface modification between LGPS and Li and the realization of ASSLSBs with stable cycle life.

Phosphor-Doped Carbon Network Electrocatalyst Enables Accelerated Redox Kinetics of Polysulfides for Sodium-Sulfur Batteries.

Lithium-ion batteries, which have dominated large-scale energy storage for the past three decades, face limitations in energy density and cost. Sulfur, with its impressive capacity of 1675 mAh g-1 and high theoretical energy density of 1274 Wh kg-1, stands out as a promising cathode material, leading to a growing focus on sodium-sulfur (Na-S) batteries as an alternative to address lithium resource scarcity. Nevertheless, the development is restrained by poor conductivity, volume expansion of the sulfur cathode, and the shuttle effect of sodium polysulfides (Na2Sn) in the electrolytes. In this study, a facile method is designed to fabricate phosphor-doped carbon (phos-C), which is then used as a sulfur matrix. This micromesoporous phos-C network enhances sulfur utilization, increases overall cathode conductivity, and effectively mitigates the shuttling of Na2Sn. During the discharge process, phos-C can absorb soluble Na2Sn and increase the conductivity of sulfur, while serving as a reservoir for electrolyte and Na2Sn, thereby preventing their infiltration into the anode and reducing the loss of sodium. As a result, the well-designed sulfur-loaded phos-C (S/phos-C) cathode, employed in the Na-S battery, demonstrates a capacity of 1034 mAh g-1 at 0.1 C (1 C = 1675 mA g-1) and an excellent rate capability of 339 mAh g-1 at 10 C, coupled with a prolonged cycling life up to 2000 cycles at 1 C, exhibiting an ultralow capacity decay rate of 0.013% per cycle. Overall, this study introduces an efficient method for creating long-lasting Na-S batteries.