RESUMEN
High-loading electrodes play a crucial role in designing practical high-energy batteries as they reduce the proportion of non-active materials, such as current separators, collectors, and battery packaging components. This design approach not only enhances battery performance but also facilitates faster processing and assembly, ultimately leading to reduced production costs. Despite the existing strategies to improve rechargeable battery performance, which mainly focus on novel electrode materials and high-performance electrolyte, most reported high electrochemical performances are achieved with low loading of active materials (<2 mg cm-2). Such low loading, however, fails to meet application requirements. Moreover, when attempting to scale up the loading of active materials, significant challenges are identified, including sluggish ion diffusion and electron conduction kinetics, volume expansion, high reaction barriers, and limitations associated with conventional electrode preparation processes. Unfortunately, these issues are often overlooked. In this review, the mechanisms responsible for the decay in the electrochemical performance of high-loading electrodes are thoroughly discussed. Additionally, efficient solutions, such as doping and structural design, are summarized to address these challenges. Drawing from the current achievements, this review proposes future directions for development and identifies technological challenges that must be tackled to facilitate the commercialization of high-energy-density rechargeable batteries.
RESUMEN
Interfacial chemistry plays a crucial role in determining the electrochemical properties of low-temperature rechargeable batteries. Although existing interface engineering has significantly improved the capacity of rechargeable batteries operating at low temperatures, challenges such as sharp voltage drops and poor high-rate discharge capabilities continue to limit their applications in extreme environments. In this study, an energy-level-adaptive design strategy for electrolytes to regulate interfacial chemistry in low-temperature Li||graphite dual-ion batteries (DIBs) is proposed. This strategy enables the construction of robust interphases with superior ion-transfer kinetics. On the graphite cathode, the design endues the cathode interface with solvent/anion-coupled interfacial chemistry, which yields an nitrogen/phosphor/sulfur/fluorin (N/P/S/F)-containing organic-rich interphase to boost anion-transfer kinetics and maintains excellent interfacial stability. On the Li metal anode, the anion-derived interfacial chemistry promotes the formation of an inorganic-dominant LiF-rich interphase, which effectively suppresses Li dendrite growth and improves the Li plating/stripping kinetics at low temperatures. Consequently, the DIBs can operate within a wide temperature range, spanning from -40 to 45 °C. At -40 °C, the DIB exhibits exceptional performance, delivering 97.4% of its room-temperature capacity at 1 C and displaying an extraordinarily high-rate discharge capability with 62.3% capacity retention at 10 C. This study demonstrates a feasible strategy for the development of high-power and low-temperature rechargeable batteries.
RESUMEN
Organics are gaining significance as electrode materials due to their merits of multi-electron reaction sites, flexible rearrangeable structures and redox reversibility. However, organics encounter finite electronic conductivity and inferior durability especially in organic electrolytes. To circumvent above barriers, we propose a novel design strategy, constructing conductive network structures with extended π-π superposition effect by manipulating intermolecular interaction. Tetralithium 1,4,5,8-naphthalenetetracarboxylate (LNTC) interwoven by carbon nanotubes (CNTs) forms LNTC@CNTs composite firstly for Li-ion storage, where multiple conjugated carboxyls contribute sufficient Li-ion storage sites, the unique network feature enables electrolyte and charge mobility conveniently combining electron delocalization in π-conjugated system, and the enhanced π-π superposition effect between LNTC and CNTs endows laudable structural robustness. Accordingly, LNTC@CNTs maintain an excellent Li-ion storage capacity retention of 96.4 % after 400â cycles. Electrochemical experiments and theoretical simulations elucidate the fast reaction kinetics and reversible Li-ion storage stability owing to the electron delocalization and π-π superposition effect, while conjugated carboxyls are reversibly rearranged into enolates during charging/discharging. Consequently, a dual-ion battery combining this composite anode and expanded graphite cathode exhibits a peak specific capacity of 122â mAh g-1 and long cycling life with a capacity retention of 84.2 % after 900â cycles.
RESUMEN
Dual-ion batteries (DIBs) present great application potential in low-temperature energy storage scenarios due to their unique dual-ion working mechanism. However, at low temperatures, the insufficient electrochemical oxidation stability of electrolytes and depressed interfacial compatibility impair the DIB performance. Here, we design a variant-localized high-concentration solvation structure for universal low-temperature electrolytes (ν-LHCE) without the phase separation via introducing an extremely weak-solvating solvent with low energy levels. The unique solvation structure gives the ν-LHCE enhanced electrochemical oxidation stability. Meanwhile, the extremely weak-solvating solvent can competitively participate in the Li+-solvated coordination, which improves the Li+ transfer kinetics and boosts the formation of robust interphases. Thus, the ν-LHCE electrolyte not only has a good high-voltage stability of >5.5â V and proper Li+ transference number of 0.51 but also shows high ionic conductivities of 1 mS/cm at low temperatures. Consequently, the ν-LHCE electrolyte enables different types of batteries to achieve excellent long-term cycling stability and good rate capability at both room and low temperatures. Especially, the capacity retentions of the DIB are 77.7 % and 51.6 %, at -40 °C and -60 °C, respectively, indicating great potential for low-temperature energy storage applications, such as polar exploration, emergency communication equipment, and energy storage station in cold regions.
RESUMEN
Rational design of the proximal coordination of an active site to achieve its optimum catalytic activity is the ultimate goal in single-atom catalysis, but still challenging. Here, we report theoretical prediction and experimental realization of an asymmetrically coordinated iridium single-atom catalyst (IrN3 O) for the formic acid oxidation reaction (FAOR). Theoretical calculations reveal that the substitution of one or two nitrogen with more electronegative oxygen in the symmetric IrN4 motif splits and downshifts the Ir 5d orbitals with respect to the Fermi level, moderating the binding strength of key intermediates on IrN4-x Ox (x=1, 2) sites, especially that the IrN3 O motif shows ideal activity for FAOR with a near-zero overpotential. The as-designed asymmetric Ir motifs were realized by pyrolyzing Ir precursor with oxygen-rich glucose and nitrogen-rich melamine, exhibiting a mass activity of 25 and 87 times greater than those of state-of-the-art Pd/C and Pt/C, respectively.
RESUMEN
Although additives are widely used in aqueous electrolytes to inhibit the formation of dendrites and hydrogen evolution reactions on Zn anodes, there is a lack of rational design principles and systematic mechanistic studies on how to select a suitable additive to regulate reversible Zn plating/stripping chemistry. Here, using saccharides as the representatives, we reveal that the electrostatic polarity of non-sacrificial additives is a critical descriptor for their ability to stabilize Zn anodes. Non-sacrificial additives are found to continuously modulate the solvation structure of Zn ions and form a molecular adsorption layer (MAL) for uniform Zn deposition, avoiding the thick solid electrolyte interphase layer due to the decomposition of sacrificial additives. A high electrostatic polarity renders sucrose the best hydrated Zn2+ desolvation ability and facilitates the MAL formation, resulting in the best cycling stability with a long-term reversible plating/stripping cycle life of thousands of hours. This study provides theoretical guidance for the screening of optimal additives for high-performance ZIBs.
RESUMEN
The pulverization of alloying anodes significantly restricts their use in lithium-ion batteries (LIBs). This study presents a dual-phase solid electrolyte interphase (SEI) design that incorporates finely dispersed Al nanoparticles within the LiPON matrix. This distinctive dual-phase structure imparts high stiffness and toughness to the integrated SEI film. In comparison to single-phase LiPON film, the optimized Al/LiPON dual-phase SEI film demonstrates a remarkable increase in fracture toughness by 317.8 %, while maintaining stiffness, achieved through the substantial dissipation of strain energy. Application of the dual-phase SEI film on an Al anode leads to a 450 % enhancement in cycling stability for lithium storage in dual-ion batteries. A similar enhancement in cycling stability for silicon anodes, which face severe volume expansion issues, is also observed, demonstrating the broad applicability of the dual-phase SEI design. Specifically, homogeneous Li-Al alloying has been observed in conventional LIBs, even when paired with a high mass loading LiNi0.5 Co0.3 Mn0.2 O2 cathode (7â mg cm-2 ). The dual-phase SEI film design can also accelerate the diffusion kinetics of Li-ions through interface electronic structure regulation. This dual-phase design can integrate stiffness and toughness into a single SEI film, providing a pathway to enhance both the structural stability and rate capability of alloying anodes.
RESUMEN
Rechargeable magnesium batteries (RMBs) are promising candidates to replace currently commercialized lithium-ion batteries (LIBs) in large-scale energy storage applications owing to their merits of abundant resources, low cost, high theoretical volumetric capacity, etc. However, the development of RMBs is still facing great challenges including the incompatibility of the electrolyte and the lack of suitable cathode materials with high reversible capacity and fast kinetics of Mg2+ . While tremendous efforts have been made to explore compatible electrolytes and appropriate electrode materials, the rational design of unconventional Mg-based battery systems is another effective strategy for achieving high electrochemical performance. This review specifically discusses the recent research progress of various Mg-based battery systems. First, the optimization of electrolyte and electrode materials for conventional RMBs is briefly discussed. Furthermore, various Mg-based battery systems, including Mg-chalcogen (S, Se, Te) batteries, Mg-halogen (Br2 , I2 ) batteries, hybrid-ion batteries, and Mg-based dual-ion batteries are systematically summarized. This review aims to provide a comprehensive understanding of different Mg-based battery systems, which can inspire latecomers to explore new strategies for the development of high-performance and practically available RMBs.
RESUMEN
Electrochemical capacitors charge and discharge more rapidly than batteries over longer cycles, but their practical applications remain limited due to their significantly lower energy densities. Pseudocapacitors and hybrid capacitors have been developed to extend Ragone plots to higher energy density values, but they are also limited by the insufficient breadth of options for electrode materials, which require materials that store alkali metal cations such as Li+ and Na+. Herein, we report a comprehensive and systematic review of emerging anion storage materials for performance- and functionality-oriented applications in electrochemical and battery-capacitor hybrid devices. The operating principles and types of dual-ion and whole-anion storage in electrochemical and hybrid capacitors are addressed along with the classification, thermodynamic and kinetic aspects, and associated interfaces of anion storage materials in various aqueous and non-aqueous electrolytes. The charge storage mechanism, structure-property correlation, and electrochemical features of anion storage materials are comprehensively discussed. The recent progress in emerging anion storage materials is also discussed, focusing on high-performance applications, such as dual-ion- and whole-anion-storing electrochemical capacitors in a symmetric or hybrid manner, and functional applications including micro- and flexible capacitors, desalination, and salinity cells. Finally, we present our perspective on the current impediments and future directions in this field.
RESUMEN
Due to the large abundance, low redox potential, and multivalent properties of calcium (Ca), Ca-ion batteries (CIBs) show promising prospects for energy storage applications. However, current research on CIBs faces the challenges of unsatisfactory cycling stability and capacity, mainly restricted by the lack of suitable electrolytes and electrode materials. Herein, we firstly developed a 3.5â m concentrated electrolyte with a calcium bis(fluorosulfonyl)imide (Ca(FSI)2 ) salt dissolved in carbonate solvents. This electrolyte significantly improved the intercalation capacity for anions in the graphite cathode and contributed to the reversible insertion of Ca2+ in the organic anode. By combining this concentrated electrolyte with the low-cost and environmentally friendly graphite cathode and organic anode, the assembled Ca-based dual-ion battery (Ca-DIB) exhibits 75.4â mAh g-1 specific discharge capacity at 100â mA g-1 and 84.7 % capacity retention over 350â cycles, among the best results known for CIBs.
RESUMEN
Alloy-type anodes are one of the most promising classes of next-generation anode materials due to their ultrahigh theoretical capacity (2-10â times that of graphite). However, current alloy-type anodes have several limitations: huge volume expansion, high tendency to fracture and disintegrate, an unstable solid-electrolyte interphase (SEI) layer, and low Coulombic efficiency. Efforts to overcome these challenges are ongoing. This Review details recent progress in the research of batteries based on alloy-type anodes and discusses the direction of their future development. We conclude that improvements in structural design, the introduction of a protective interface, and the selection of suitable electrolytes are the most effective ways to improve the performance of alloy-type anodes. Furthermore, future studies should direct more attention toward analyzing their synergistic promoting effect.
RESUMEN
Aluminum is a promising anode material for lithium-ion batteries owing to its high theoretical capacity, excellent conductivity, and natural abundance. An anomalous size effect was observed for micron-sized aluminum powder electrodes in this work. Experimental and theoretical investigations reveal that the insulating oxide surface layer is the underlying cause, which leads to poor electrical conductivity and limited capacity utilization when the particle is too small. Additionally, poor electrolyte wettability also accounts for the hindered reaction kinetics due to the weak polarity feature of the oxide layer. Surface grafting of polar amino groups was demonstrated to be an effective strategy to improve electrolyte wettability. The present work revealed the critical limitations and underlying mechanisms for the aluminum anode, which is crucial for its practical application. Our results are also valuable for other metallic anodes with similar issues.
RESUMEN
Diamond is a highly attractive material for ample applications in material science, engineering, chemistry, and biology because of its favorable properties. The advent of conductive diamond coatings and the steady demand for miniaturization in a plethora of economic and scientific fields resulted in the impetus for interdisciplinary research to develop intricate deposition techniques for thin (≤1000 nm) and ultra-thin (≤100 nm) diamond films on non-diamond substrates. By virtue of the lowered thickness, diamond coatings feature high optical transparency in UV-IR range. Combined with their semi-conductivity and mechanical robustness, they are promising candidates for solar cells, optical devices, transparent electrodes, and photochemical applications. In this review, the difficulty of (ultra-thin) diamond film development and production, introduction of important stepping stones for thin diamond synthesis, and summarization of the main nucleation procedures for diamond film synthesis are elucidated. Thereafter, applications of thin diamond coatings are highlighted with a focus on applications relying on ultrathin diamond coatings, and the excellent properties of the diamond exploited in said applications are discussed, thus guiding the reader and enabling the reader to quickly get acquainted with the research field of ultrathin diamond coatings.
Asunto(s)
Diamante , ElectrodosRESUMEN
Owing to the low cost of sodium/potassium resources and similar electrochemical properties of Na+ /K+ to Li+ , sodium-ion batteries (SIBs) and potassium-ion batteries (KIBs) are regarded as promising alternatives to lithium-ion batteries (LIBs) in large-scale energy storage field. However, traditional organic liquid electrolytes bestow SIBs/KIBs with serious safety concerns. In contrast, quasi-/solid-phase electrolytes including polymer electrolytes (PEs) and inorganic solid electrolytes (ISEs) show great superiority of high safety. However, the poor processibility and relatively low ionic conductivity of Na+ and K+ ions limit the further practical applications of ISEs. PEs combine some merits of both liquid-phase electrolytes and ISEs, and present great potentials in next-generation energy storage systems. Considerable efforts have been devoted to improving their overall properties. Nevertheless, there is still a lack of an in-depth and comprehensive review to get insights into mechanisms and corresponding design strategies of PEs. Herein, the advantages of different electrolytes, particularly PEs are first minutely reviewed, and the mechanism of PEs for Na+ /K+ ion transfer is summarized. Then, representative researches and recent progresses of SIBs/KIBs based on PEs are presented. Finally, some suggestions and perspectives are put forward to provide some possible directions for the follow-up researches.
RESUMEN
Redox-active organics are investigation hotspots for metal ion storage due to their structural diversity and redox reversibility. However, they are plagued by limited storage capacity, sluggish ion diffusion kinetics, and weak structural stability, especially for K+ ion storage. Herein, we firstly reported the lamellar tetrapotassium pyromellitic (K4 PM) with four active sites and large interlayer distance for K+ ion storage based on a design strategy, where organics are constructed with the small molecular mass, multiple active sites, fast ion diffusion channels, and rigid conjugated π bonds. The K4 PM electrode delivers a high capacity up to 292â mAh g-1 at 50â mA g-1 , among the best reported organics for K+ ion storage. Especially, it achieves an excellent rate capacity and long-term cycling stability with a capacity retention of ≈83 % after 1000â cycles. Incorporating in situ and ex-situ techniques, the K+ ion storage mechanism is revealed, where conjugated carboxyls are reversibly rearranged into enolates to stably store K+ ions. This work sheds light on the rational design and optimization of organic electrodes for efficient metal ion storage.
RESUMEN
Dual-ion batteries (DIBs) inherently suffer from limited energy density. Proposed here is a strategy to effectively tackle this issue by employing locally ordered graphitized carbon (LOGC) cathodes. Quantum mechanical modeling suggests that strong anion-anion repulsions and severe expansion at the deep-charging stage raise the anion intercalation voltage, therefore only part of the theoretical anion storage sites in graphite is accessible. The LOGC interconnected with disordered carbon is predicted to weaken the interlaminar van der Waals interactions, while disordered carbons not only interconnect the dispersed nanographite but also partially buffer severe anion-anion repulsion and offer extra capacitive anion storage sites. As a proof-of-concept, ketjen black (KB) with LOGC was used as a model cathode for a potassium-based DIB (KDIB). The KDIB delivers an unprecedentedly high specific capacity of 232â mAh g-1 at 50â mA g-1 , a good rate capability of 110â mAh g-1 at 2000â mA g-1 , and excellent cycling stability of 1000â cycles without obvious capacity fading.
RESUMEN
Aqueous Zn-based hybrid energy storage devices (HESDs) exhibit great potential for large-scale energy storage applications for the merits of environmental friendliness, low redox potential, and high theoretical capacity of Zn anode. However, they are still subjected to low specific capacities since adsorption-type cathodes (i.e., activated carbon, hard carbon) have limited capability to accommodate active ions. Herein, a hierarchical porous activated carbon cathode (HPAC) is prepared via an in situ two-step activation strategy, different from the typical one-step/postmortem activation of fully carbonized precursors. The strategy endows the HPAC with a high specific surface area and a large mesoporous volume, and thus provides abundant active sites and fast kinetics for accommodating active ions. Consequently, pairing the HPAC with Zn anode yields an aqueous Zn-based HESD, which delivers a high specific capacity of 231 mAh g-1 at 0.5 A g-1 and excellent rate performance with a retained capacity of 119 mAh g-1 at 20 A g-1 , the best result among previously reported lithium-free HESDs based on carbon cathodes. Further, the aqueous Zn-based HESD shows ultra-long cycling stability with a capacity retention of ≈70% after 18 000 cycles at 10 A g-1 , indicating great potential for environmentally friendly, low-cost, and high-safety energy storage applications.
RESUMEN
Transition-metal oxalates have wide applications in magnetics, photoemission, electrochemistry, etc. Herein, using hydrothermal reactions, five cobalt(II) oxalates, Na2Co2(C2O4)3·2H2O (I), Na2Co(C2O4)2·8H2O (II), KLi3Co(C2O4)3 (III), Li4Co(C2O4)3 (IV), and (NH4)2Co2(C2O4)F4 (V) have been synthesized, and their structures are determined from single-crystal X-ray diffraction or Rietveld refinement of powder X-ray diffraction data. Notably, IV and V are identified for the first time. The structures of these cobalt oxalates are versatile, covering 0D, 1D, 2D, and 3D frameworks, while the coordination environments of Co2+ centers are uniquely distorted octahedra. As representative examples, I and III are investigated as cathode materials for secondary batteries. Both exhibited electrochemical activity despite large cell polarization. The present study enriches the transition-metal oxalate family and provides new options for energy storage materials.
RESUMEN
Dual-ion batteries (DIBs) have attracted much attention owing to their low cost, high voltage, and environmental friendliness. As the source of active ions during the charging/discharging process, the electrolyte plays a critical role in the performance of DIBs, including capacity, energy density, and cycling life. However, most used electrolyte systems based on the LiPF6 salt demonstrate unsatisfactory performance in DIBs. We have successfully developed a 7.5â mol kg-1 lithium bis(fluorosulfonyl)imide (LiFSI) in a carbonate electrolyte system. Compared with diluted electrolytes, this highly concentrated electrolyte exhibits several advantages: 1)â enhanced intercalation capacity and cycling stability of the graphite cathode, 2)â optimized structural stability of the Al anode, and 3)â significantly increased battery energy density. A proof-of-concept DIB based on this concentrated electrolyte exhibits a discharge capacity of 94.0â mAh g-1 at 200â mA g-1 and 96.8 % capacity retention after 500â cycles. By counting both the electrode materials and electrolyte, the energy density of this DIB reaches up to ≈180â Wh kg-1 , which is among the best performances of DIBs reported to date.
RESUMEN
Low-cost electrochemical energy storage systems (EESSs) are urgently needed to promote the application of renewable energy sources such as wind and solar energy. In analogy to lithium-ion batteries, the cost of EESSs depends mainly on charge-carrier ions and redox centers in electrodes, and their performance is limited by positive electrodes. In this context, this Minireview evaluates several EESS candidates and summarizes the known mixed polyanionic compounds (MPCs)-a family with robust frameworks and large channels for ion storage and migration. After comprehensive analysis, it is pointed out that a deeper exploration of MPCs may generate numerous novel crystallographically interesting compounds and excellent cathode materials for low-cost energy storage applications.