Reductive Coupling of P(O)-H Compounds and Aldehydes for the General Synthesis of Phosphines and Phosphine Oxides.

A novel strategy for the selective construction of a C(sp3)-P(III) or -P(V) bond from >P(O)-H compounds and aldehydes is disclosed. By using the H3PO3/I2 system, various secondary phosphine oxides could react with both aromatic and aliphatic aldehydes to afford valuable phosphines (isolated as sulfides) and phosphine oxides in good yields. This method features a wide substrate scope and simple reaction conditions and avoids the use of toxic halides and metals.

Trivalent Organostibines: Sb,N Ligands in Double N-Arylation of Primary Amines toward Functionalized Carbazoles.

A Sb,N ligand (L-Sb) for Pd-catalyzed double N-arylation of primary amines was developed. This trivalent ligand L-Sb, containing a 5,6,7,12-tetrahydrodibenzo[c,f][1,5]azastibocine skeleton and stable under air and moisture, could be synthesized facilely on a gram scale from chlorostibine (1) and cyclopentylmagnesium bromide. L-Sb showed excellent catalytic performance in Pd2(dba)3-catalyzed double N-arylation of 2,2'-dibromo-1,1'-biphenyl (2) with primary amines (3), affording functionalized carbazoles in good yields. This Pd2(dba)3/L-Sb-catalyzed double N-arylation, the first example of the application of trivalent organostibines as a ligand in N-arylation, featured the following advantages: small catalyst loading, wide functional group tolerance, good yields, and ease of gram-scale synthesis.

A ternary nucleotide-lanthanide coordination nanoprobe for ratiometric fluorescence detection of ciprofloxacin.

Ciprofloxacin (CIP) is a widely used broad-spectrum antibiotic and has been associated with various side effects, making its accurate detection crucial for patient safety, drug quality compliance, and environmental and food safety. This study presents the development of a ternary nucleotide-lanthanide coordination nanoprobe, GMP-Tb-BDC (GMP: guanosine 5'-monophosphate, BDC: 2-amino-1,4-benzenedicarboxylic acid), for the sensitive and ratiometric detection of CIP. The GMP-Tb-BDC nanoprobe was constructed by incorporating the blue-emissive ligand BDC into the Tb/GMP coordination polymers. Upon the addition of CIP, the fluorescence of terbium ion (Tb3+ ) was significantly enhanced due to the coordination and fluorescence sensitization properties of CIP, while the emission of the BDC ligand remained unchanged. The nanoprobe demonstrated good linearity in the concentration range of 0-10 µM CIP. By leveraging mobile phone software to analyze the color signals, rapid on-site analysis of CIP was achieved. Furthermore, the nanoprobe exhibited accurate analysis of CIP in actual drug and milk samples. This study showcases the potential of the GMP-Tb-BDC nanoprobe for practical applications in CIP detection.

Recent Advances in Photoswitchable Fluorescent and Colorimetric Probes.

In recent years, significant advancements have been made in the research of photoswitchable probes. These probes undergo reversible structural and electronic changes upon light exposure, thus exhibiting vast potential in molecular detection, biological imaging, material science, and information storage. Through precisely engineered molecular structures, the photoswitchable probes can toggle between "on" and "off" states at specific wavelengths, enabling highly sensitive and selective detection of targeted analytes. This review systematically presents photoswitchable fluorescent and colorimetric probes built on various molecular photoswitches, primarily focusing on the types involving photoswitching in their detection and/or signal response processes. It begins with an analysis of various molecular photoswitches, including their photophysical properties, photoisomerization and photochromic mechanisms, and fundamental design concepts for constructing photoswitchable probes. The article then elaborates on the applications of these probes in detecting diverse targets, including cations, anions, small molecules, and biomacromolecules. Finally, it offers perspectives on the current state and future development of photoswitchable probes. This review aims to provide a clear introduction for researchers in the field and guidance for the design and application of new, efficient fluorescent and colorimetric probes.

Niobium Oxide Anode with Lattice Structure Self-Optimization for High-Power and Nearly Zero-Degeneration Battery Operation.

Li+ insertion-induced structure transformation in crystalline electrodes vitally influence the energy density and cycle life of secondary lithium-ion battery. However, the influence mechanism of structure transformation-induced Li+ migration on the electrochemical performance of micro-crystal materials is still unclear and the strategy to profit from such structure transformation remains exploited. Here, an interesting self-optimization of structure evolution during electrochemical cycling in Nb2 O5 micro-crystal with rich domain boundaries is demonstrated, which greatly improves the charge transfer property and mechanical strength. The lattice rearrangement activates the Li+ diffusion kinetics and hinders the particle crack, thus enabling a nearly zero-degeneration operation after 8000 cycles. Full cell paired with lithium cobalt oxides displays an exceptionally high capacity of 176 mA h g-1 at 8000 mA g-1 and excellent long-term durability at 6000 mA g-1 with 63% capacity retention over 2000 cycles. Interestingly, a unique fingerprint based on the intensity ratio of two X-ray diffraction peaks is successfully extracted as a measure of Nb2 O5 electrochemical performance. The structure self-optimization for fast charge transfer and high mechanical strength exemplifies a new battery electrode design concept and opens up a vast space of strategy to develop high-performance lithium-ion batteries with high energy density and ultra-long cycle life.

Thioalkynes in Ring Forming Reactions.

Organic cycles play an important role in chemistry, pharmacology and material science for their unique properties. Construction of organic cycles from thioalkynes attracted increasing attention due to the facile access of thioalkynes. 2H-Azirines were synthesized successfully from thioalkynyl oxime ethers. Cyclobutanes were formed through chiral titanium catalyzed cycloaddition of thioalkynes. Cyclopentenes were afforded by annulation of thioalkynes. Thioalkynes could be also applied to synthesize thiophenes, oxazoles, benzo[b]thiophenes, 2H-chromenes, 2-phenylbenzothiazoles, diazacyclobutene, etc. In this review, construction of organic cycles from thioalkynes were highlighted. Firstly, the property and application of organic cyclic compounds were simply introduced. After presenting the general methods to access organic cycles, applications of thioalkynes as synthons to prepare organic cycles were classified and presented in detail. Based on different kinds of organic cycles obtained from thioalkynes, organic reactions for synthesis of three-, four-, five-, six-membered as well as fused cycles would be summarized and the plausible reaction mechanisms could be presented if available.

Study on the Mechanism of Ru-Catalyzed Cyclization of Aromatic Amides with Allylphosphine Oxides.

The mechanism of Ru-catalyzed cyclization of aromatic amides with allylphosphine oxides is studied by density functional theory calculation (DFT). The results show that, first, a 5-membered Ru ring intermediate is formed by N-H and C-H diprotons via the concerted metalation-deprotonation mechanism (CMD) and then the allylphosphine oxide is inserted through the ring-extending reaction to form a 7-membered ring intermediate. Next, reduction elimination is followed via intramolecular hydrogen transfer isomerization. At last, with the assistance of acetic acid, Ru (II) → Ru (IV) → Ru (II) complexes occur from the 7-membered Ru ring intermediate, and the final product is formed by reduction elimination and protonation reaction, while the catalyst is released to participate in the next cycle.

Process-Divergent Syntheses of 4- and 5-Sulfur-Functionalized 1,2,3-Triazoles via Copper-Catalyzed Azide-Alkyne Cycloadditions of 1-Phosphinyl-2-sulfanylethynes.

4-Sulfanyl-substituted 1,2,3-triazoles were provided regioselectively with good yields and broad scope via consecutive t-BuOK-promoted dephosphinylation of 1-phosphinyl-2-sulfanylethynes and copper-catalyzed azide-alkyne cycloadditions (CuAAC) with alkyl azides. Unsymmetrically substituted ditriazoles were successfully obtained using a tandem dephosphinylative CuAAC protocol with diazides. Direct CuAAC of the 1-phosphinyl-2-sulfanylethynes with azides afforded regioisomeric mixtures of 4-phosphinyl-5-sulfanyl- and 5-phosphinyl-4-sulfanyl-1,2,3-triazoles that were easily separable from one another. When the phosphinyl- and sulfanyl-substituted triazoles were treated with t-BuOK, the dephosphination proceeded smoothly, yielding the corresponding 5- and 4-sulfanyltriazoles, respectively. 5-(1-Aryl-1-hydroxymethyl)-4-sulfanyltriazoles were synthesized by stepwise treatment of 5-phosphinyl-4-sulfanyltriazole with MeMgBr and arylaldehydes. Additionally, Ph2P(O) and RS groups in the triazoles were easily converted to Ph2P and RSO2 by PhSiH3-reduction and m-CPBA-oxidation, respectively. Following the dephosphinylative CuAAC of 1-phosphinyl-2-(4-t-butylphenylsulfanyl)ethyne with aryl azides and m-CPBA-oxidation, potent antagonists of pregnane X receptor LC-58 and LC-59 were successfully produced.

Identifying the Interfacial Polarization in Non-stoichiometric Lead-Free Perovskites by Defect Engineering.

Recent advances in perovskite ferroelectrics have fostered a host of exciting sensors and actuators. Defect engineering provides critical control of the performance of ferroelectric materials, especially lead-free ones. However, it remains a challenge to quantitatively study the concentration of defects due to the complexity of measurement techniques. Here, a feasible approach to analyzing the A-site defect and electron in alkali metal niobate is demonstrated. The theoretical relationships among defect concentration, conductivity, and oxygen partial pressure can be established based on the defect chemistry equilibria. The type and concentration of defects are reflected through the conductivity variation with oxygen partial pressure. As a result, the variation of defect concentration gives rise to defect-driven interfacial polarization, which further leads to distinct properties of the ceramics. e.g., abnormal dielectric behavior. Furthermore, this study also suggests a strategy to manipulate defects and charges in perovskite oxides for performance optimization.

Enhancing Li-Ion Transport in Solid Electrolytes by Confined Water.

Developing new oxide solid electrolytes with fast Li-ion transport and high stability is an important step to realize high-performance solid-state Li-ion batteries. Hydrate materials containing confined water widely exist in nature or can be easily synthesized. However, they have seldom been explored as Li-ion solid electrolytes due to the stereotype that the presence of water limits the electrochemical stability window of a solid electrolyte. In this work, it is demonstrated that confined water can enhance Li-ion transport while not compromising the stability window of solid electrolytes using Li-H-Ti-O quaternary compounds as an example system. Three Li-H-Ti-O quaternary compounds containing different amounts of confined water are synthesized, and their ionic conductivity and electrochemical stability are compared. The compound containing structural pseudo-water is demonstrated to have an ionic conductivity that is 2-3 order of magnitude higher than the water-free Li4 Ti5 O12 and similar stability window. A solid-state battery is made with this new compound as the solid electrolyte, and good rate and cycling performance are achieved, which demonstrates the promise of using such confined-water-containing compounds as Li-ion solid electrolytes. The knowledge and insights gained in this work open a new direction for designing solid electrolytes for future solid-state Li-ion batteries. Broadly, by confining water into solid crystal structures, new design freedoms for tailing the properties of ceramic materials are introduced, which creates new opportunities in designing novel materials to address critical problems in various engineering fields.

One-pot synthesis of phosphorylnaphth[2,1-d]oxazoles and products as P,N-ligands in C-N and C-C formation.

Phosphanylnaphtho[2,1-d]oxazoles were synthesized successfully through one-pot phosphonation of naphthoquinone with diaryl(alkyl)phosphine oxides and Cu-catalyzed oxidative condensation with imines, followed by methylation and reduction. Upon applying 4-phosphanylnaphtho[2,1-d]oxazole as a P,N-chelating ligand, Pd-catalyzed C-N formation of amines or nitrobenzene as well as Ni-catalyzed C-C formation and the synthesis of quinoline proceeded successfully. The reaction was facilely scaled up to give N-benzylaniline 15a in a gram scale synthesis. This research provided a facile and convenient protocol to synthesize phosphanylnaphtho[2,1-d]oxazoles, which could be applied as an efficient P,N-ligand in transition-metal-catalyzed C-N and C-C formation to produce the desired products in high yields with wide functional group tolerance under small catalyst loading, solvent-free conditions in many reactions.

Highly-Dispersed Submicrometer Single-Crystal Nickel-Rich Layered Cathode: Spray Synthesis and Accelerated Lithium-Ion Transport.

For conventional polycrystalline Ni-rich cathode material consisting of numerous primary particles in disordered orientation, the crystal anisotropy in charge/discharge process results in the poor rate capability and rapid capacity degradation. In this work, highly-dispersed submicron single-crystal LiNi0.8 Co0.15 Al0.05 O2 (SC-NCA) cathode is efficiently prepared by spray pyrolysis (SP) technique followed by a simple solid-state lithiation reaction. Porous Ni0.8 Co0.15 Al0.05 Ox precursor prepared via SP exhibits high chemical activity for lithiation reaction, enabling the fabrication of single-crystal cathode at a relatively low temperature. In this way, the contradiction between high crystallinity and cation disordering is well balanced. The resulted optimized SC-NCA shows polyhedral single-crystal morphology with moderate grain size (≈1 µm), which are beneficial to shortening the Li+ diffusion path and improving the structural stability. As cathode for lithium ion batteries, SC-NCA delivers a high discharge capacity of 202 and 140 mAh g-1 at 0.1 and 10 C, respectively, and maintains superior capacity retention of 161 mAh g-1 after 200 cycles at 1C. No micro-crack is observed in the cycled SC-NCA particles, indicating such single-crystal morphology can greatly relieve the anisotropic micro-strain. This effective, continuous and adaptable strategy for preparing single-crystal Ni-rich cathode without any additive may accelerate their practical application.

Iodine Promoted Conversion of Esters to Nitriles and Ketones under Metal-Free Conditions.

We report a novel strategy to prepare valuable nitriles and ketones through the conversion of esters under metal-free conditions. By using the I2/PCl3 system, various substrates including aliphatic and aromatic esters could react with acetonitrile and arenes to afford the desired products in good to excellent yields. This method is compatible with a number of functional groups and provides a simple and practical approach for the synthesis of nitrile compounds and aryl ketones.

Conversion of Aryl Aldehydes to Benzyl Iodides and Diarylmethanes by H3PO3/I2.

For the first time, H3PO3 was used as both the reducing reagent and the promotor in the reductive benzylation reactions with aryl aldehydes. By using a H3PO3/I2 combination, various aromatic aldehydes underwent iodination reactions and Friedel-Crafts type reactions with arenes via benzyl iodide intermediates, readily producing benzyl iodides and diarylmethanes in good yields. Intramolecular cyclization reactions also took place, giving the corresponding cyclic compounds. This new strategy features easy-handling, low-cost, and metal-free conditions.

Biological evaluation and SAR analysis of novel covalent inhibitors against fructose-1,6-bisphosphatase.

Fructose-1,6-bisphosphatase (FBPase) is an attractive target for affecting the GNG pathway. In our previous study, the C128 site of FBPase has been identified as a new allosteric site, where several nitrovinyl compounds can bind to inhibit FBPase activity. Herein, a series of nitrostyrene derivatives were further synthesized, and their inhibitory activities against FBPase were investigated in vitro. Most of the prepared nitrostyrene compounds exhibit potent FBPase inhibition (IC50 < 10 µM). Specifically, when the substituents of F, Cl, OCH3, CF3, OH, COOH, or 2-nitrovinyl were installed at the R2 (meta-) position of the benzene ring, the FBPase inhibitory activities of the resulting compounds increased 4.5-55 folds compared to those compounds with the same groups at the R1 (para-) position. In addition, the preferred substituents at the R3 position were Cl or Br, thus compound HS36 exhibited the most potent inhibitory activity (IC50 = 0.15 µM). The molecular docking and site-directed mutation suggest that C128 and N125 are essential for the binding of HS36 and FBPase, which is consistent with the C128-N125-S123 allosteric inhibition mechanism. The reaction enthalpy calculations show that the order of the reactions of compounds with thiol groups at the R3 position is Cl > H > CH3. CoMSIA analysis is consistent with our proposed binding mode. The effect of compounds HS12 and HS36 on glucose production in primary mouse hepatocytes were further evaluated, showing that the inhibition was 71% and 41% at 100 µM, respectively.

Discovery of novel indazole-acylsulfonamide hybrids as selective Mcl-1 inhibitors.

Overexpressing myeloid cell leukemia sequence 1 (Mcl-1) protein is an important way to confer the resistance of cancer cells to conventional anti-cancer treatments. Therefore, developing Mcl-1 inhibitors has become an attractive strategy for cancer therapy. In the studies, a series of new indazole-acylsulfonamide hybrids were designed, synthesized and evaluated as potent Mcl-1 inhibitors. Among them, the most potent compound 17 (Ki = 0.43 µM) showed a little better inhibitory activity against Mcl-1 protein than positive control AT-101 (Ki = 0.45 µM). Pleasingly, it displayed > 40-fold selectivity over Bcl-2 (Ki = 18 µM) and Bcl-xL (no activity). Furthermore, compound 17 had good inhibitory activities against PC-3, MDA-MB-231 and K562 cells (IC50 = 12.3, 10.6 and 6.62 µM, respectively) and could effectively induce apoptosis and the activation of caspase-3 in a dose-dependent manner in K562 cells.

Photoredox/Cobalt-Catalyzed Phosphinyloxy Radical Addition/Cyclization Cascade: Synthesis of Phosphaisocoumarins.

A novel visible-light photoredox-catalyzed phosphinyloxy radical addition/cyclization cascade of arylphosphinic acids or arylphosphonic acid monoesters with alkynes has been developed, which provides an efficient and practical access to various phosphaisocoumarins by using a dual catalytic system containing an acridinium photosensitizer and a cobaloxime proton-reducing catalyst [Co(dmgH)2]PyCl at ambient temperature. This method has advantages of a broad substrate scope, mild condition, as well as no sacrificial oxidant.

Iodine-Catalyzed Odorless Synthesis of S-Thiocarbamates with Sulfonyl Chlorides as a Sulfur Source.

A general and efficient protocol for the direct preparation of various S-thiocarbamates with readily available and inexpensive sulfonyl chlorides as an odorless sulfur source was developed. The employment of easily available reactants, excellent functional group tolerability, and mild reaction conditions make this process very practical.

Design, synthesis, fungicidal activity and molecular docking studies of novel 2-((2-hydroxyphenyl)methylamino)acetamide derivatives.

A series of novel 2-hydroxyphenyl substituted aminoacetamides was designed by molecular hybridization of the aminoacetamide scaffold and 2-hydroxyphenyl motif. The target compounds were synthesized and their fungicidal activities were evaluated. Some of the target compounds showed excellent antifungal activities against S. sclerotiorum and P. capsici. Significantly, compounds 5e displayed the most potent activity against S. sclerotiorum with EC50 = 2.89 µg/mL, which was lower than that of commercial chlorothalonil. The systematic studies provided strong confidence that the hydroxyl group and the carbonyl group are crucial for the fungicidal activity. Molecular docking studies suggest that SDH enzyme could be one of the potential action targets of our compounds.

Molecular iodine-mediated synthesis of thiocarbamates from thiols, isocyanides and water under metal-free conditions.

A simple and practical molecular iodine-mediated method for the efficient construction of thiocarbamates from isocyanides, thiols and water under metal-free and mild conditions has been developed. A variety of thiocarbamates were easily synthesized through this methodology, which has the advantages of simple operation, eco-friendly conditions, good functional group tolerance, and readily accessible raw materials.