A clinical report of Type III dens invaginatus: relevant aspects of a combined therapeutic approach.

Dens invaginatus is a developmental abnormality that alters dental morphology; as a result, treating this condition is a challenge for endodontic practices. This article describes how a combination of nonsurgical and surgical therapies was utilized to treat a maxillary central incisor with Type III dens invaginatus and vital pulp. The treatment plan included using computed tomography (CT) for a detailed analysis of the dental anatomy and periapical area, endodontic and surgical procedures, and a 4-year follow-up period that included periodic clinical and radiographic examinations. The follow-up examinations revealed a regression of the apical lesion and no other signs or symptoms. Based on the present case report, the authors concluded that this combination of surgical and nonsurgical approaches was effective and that CT is a valuable auxiliary tool for the study of dental anatomy.

Final irrigation protocols can be used to promote stable long-term bond strength of AH Plus to dentin.

Irrigation solutions might affect dentin surface characteristics and, consequently, endodontic sealers adhesion. This study analyzed the effect of different final irrigation protocols on push-out bond strength (BS) of AH Plus to dentin seven days and 20 months after obturation. Scanning electron micrographs were obtained from the dentin surface of one sample/group after final irrigation. Canals of bovine incisors were instrumented and received final irrigation with (n=21): G1 - 2.5% sodium hypochlorite (NaOCl) + distilled water; G2 - 2.5% NaOCl + 17% EDTA; G3 - 2.5% NaOCl + 17% EDTA + 2.5% NaOCl; G4 - 2.5% NaOCl + 17% EDTA + 2% chlorhexidine (CHX); G5 - mixture 5% NaOCl + 18% etidronate (HEDP); and G6 - mixture 5% NaOCl + 10% tetrasodium EDTA (Na4EDTA). After irrigation, one root/group was split and images were obtained by scanning electron microscopy (SEM). The other 20 roots/group were filled with only AH Plus sealer. Three slices/root were used for push-out assessment seven days and 20 months after obturation. One-way analysis of variance and Tukey (α<0.05) were used to compare the results among experimental groups, and unpaired t-test (α<0.05) was used to compare the results of the same group over time. The photomicrographs showed that, excepting G1, all groups completely removed the smear layer from the samples. In G2 and G4, the opening of the dentin tubules enlarged. In G3, erosion was observed in the peritubular and intertubular dentin. Values of the BS in the seven days were G2=G3=G4=G5>G6=G1 and in the 20 months were G3=G5>G6=G4>G1=G2. G3, G5, and G6 presented values of BS in 20 months similar to the values of seven days (P>0.05). The final irrigation protocols tested produced dentin surfaces with different characteristics. Only G3 and G5 presented high BS values that were stable over time.

The use of sodium hypochlorite mixed with etidronic acid during canal preparation increases debris extrusion.

The purpose of this study was to compare the impact of different irrigation protocols on debris extrusion. Single-rooted teeth were distributed into groups based on the irrigation protocols (n = 40): 2.5% NaOCl (biomechanical preparation: 20 mL and final irrigation: 5 mL); 2.5% NaOCl (biomechanical preparation: 20 mL) + 17% EDTA (final irrigation: 2 mL) + 2.5% NaOCl (final irrigation: 3 mL); and a mixture of 5% NaOCl +18% HEDP (biomechanical preparation: 20 mL and final irrigation: 5 mL). The canals were prepared using a reciprocating instrument size 40/0.06. For final irrigation, the groups were reassigned based on the agitation methods (n = 10): (a) no agitation; (b) ultrasonic; (c) sonic; and (d) continuous rotation. The control group (n = 10) received saline solution without agitation. The amount of debris extruded was measured by weight and analysed using One-way ANOVA (α < 0.05). The subgroups treated with NaOCl + HEDP mixture showed a significantly higher amount of extruded debris (p < 0.05), while there was no difference among agitation methods in all groups (p > 0.05).

Final irrigation protocols can be used to promote stable long-term bond strength of AH Plus to dentin

Abstract Irrigation solutions might affect dentin surface characteristics and, consequently, endodontic sealers adhesion. Objective This study analyzed the effect of different final irrigation protocols on push-out bond strength (BS) of AH Plus to dentin seven days and 20 months after obturation. Scanning electron micrographs were obtained from the dentin surface of one sample/group after final irrigation. Methodology Canals of bovine incisors were instrumented and received final irrigation with (n=21): G1 - 2.5% sodium hypochlorite (NaOCl) + distilled water; G2 - 2.5% NaOCl + 17% EDTA; G3 - 2.5% NaOCl + 17% EDTA + 2.5% NaOCl; G4 - 2.5% NaOCl + 17% EDTA + 2% chlorhexidine (CHX); G5 - mixture 5% NaOCl + 18% etidronate (HEDP); and G6 - mixture 5% NaOCl + 10% tetrasodium EDTA (Na4EDTA). After irrigation, one root/group was split and images were obtained by scanning electron microscopy (SEM). The other 20 roots/group were filled with only AH Plus sealer. Three slices/root were used for push-out assessment seven days and 20 months after obturation. One-way analysis of variance and Tukey (α<0.05) were used to compare the results among experimental groups, and unpaired t-test (α<0.05) was used to compare the results of the same group over time. Results The photomicrographs showed that, excepting G1, all groups completely removed the smear layer from the samples. In G2 and G4, the opening of the dentin tubules enlarged. In G3, erosion was observed in the peritubular and intertubular dentin. Values of the BS in the seven days were G2=G3=G4=G5>G6=G1 and in the 20 months were G3=G5>G6=G4>G1=G2. G3, G5, and G6 presented values of BS in 20 months similar to the values of seven days (P>0.05). Conclusions The final irrigation protocols tested produced dentin surfaces with different characteristics. Only G3 and G5 presented high BS values that were stable over time.

Do different strains of E. faecalis have the same behavior towards intracanal medications in in vitro research?

The aim of this study was to evaluate the antimicrobial action of different endodontic pastes against Enterococcus faecalis ATCC 29212, isolated from the urinary tract, and compare the action with E. faecalis ATCC 4083, isolated from the root canal. For this purpose, dentin blocks were infected for 21 days with both bacteria at different time-intervals to ensure there would be no cross contamination. After this period, blocks were immersed in the test medications for 7 days, according to the following groups: CH/S, CH/P, CH/CMCP, CH/CHX, CH/DAP and TAP. Images of the samples were captured with a confocal microscope and the percentage of live cells was computed by means of the Bioimage program. The ATCC 29212 strain was shown to be more resistant to CH/SS, Calen, CH/DAP, and TAP than the ATCC 4083 strain. The antimicrobial action of the medications against each strain were divergent concerning the order of susceptibility. The authors concluded that the strains behaved in a different manner: in general, those extracted from the urinary tract were more resistant to the tested medications. Therefore, when E. faecalis must be used for in vitro research in endodontics, we suggest the use of ATCC 4083 strain to obtain results that are closer to the clinical reality.

Use of refrigerant spray of a propane/butane/isobutane gas mixture in the management of keratocystic odontogenic tumors: a preliminary study.

PURPOSE: Keratocystic odontogenic tumor (KCOT) is an aggressive benign tumor and the management by complete enucleation followed by cryotherapy maintains the inorganic bone matrix, resulting in better repair and reduces the rates of recurrence. A refrigerant spray with a propane/butane/isobutane gas mixture has been pointed to as an alternative to liquid nitrogen, because the device is easy to handle and contain within the cavity, providing better control and lower risk of injury to the adjacent soft tissue. Thus, the aim of this study was to evaluate the outcome of enucleation followed by cryosurgery using a refrigerant spray of this gas mixture in ten patients diagnosed with KCOT. METHOD: The biggest lesions received a prior treatment consisting of marsupialization to decrease the tumor size. During the surgeries, the lesions were removed by enucleation and the surgical site was sprayed with the gas mixture. RESULTS: Wound dehiscence was observed in all cases, which healed by the second intention. The mean follow-up period was 64.3 months (range 24-120 months). Eight of the ten patients showed no evidence of clinical or radiographic recurrence. Pathologic fractures and infections were not observed. CONCLUSIONS: The results obtained suggest that enucleation followed by cryosurgery is an effective therapy for managing KCOT.

Tissue dissolution and modifications in dentin composition by different sodium hypochlorite concentrations.

OBJECTIVES: To determine the organic matter dissolution and changes in dentin chemical composition promoted by different concentrations of NaOCl over time. MATERIAL AND METHODS: Fragments of bovine muscle tissue were weighed before and after 5, 10, and 15 min of immersion in the groups (n=10): G1- 0.9% saline solution; G2- 1% NaOCl; G3- 2.5% NaOCl; and G4- 5% NaOCl. Bovine dentin fragments were subjected to the same irrigants and absorption spectra were collected by Attenuated Total Reflectance of Fourier Transform Infrared Spectroscopy (ATR-FTIR) before and after 0,5, 1, 2, 3, 5, 8, and 10 min of immersion in the solutions. The ratios of the amide III/phosphate and carbonate/phosphate absorption bands were determined. The tissue dissolution and carbonate/phosphate ratios were submitted to the two-way analysis of variance (ANOVA) with Tukey's multiple-comparison test (α<0.05) and to the one-way analysis of variance with Tukey's (α<0.05). The amide III/phosphate ratio was analyzed by Friedman test (α<0.05) and the Kruskal-Wallis test with Dunn's post-hoc (α<0.05). RESULTS: The increase in NaOCl concentration and contact time intensified the dissolution of organic matter and dentin collagen with reduction in the amide III/phosphate ratio. Significant differences between all groups (p<0.05) were observed in the dissolution of organic matter at 10 min and in the amide III/phosphate ratio between the saline solution and 5% NaOCl at 5 min. The carbonate/phosphate ratio decreased significantly in G2, G3, and G4 after 0,5 min of immersion (p<0.05), but more alterations did not occur in the subsequent periods (p>0.05). Intergroup differences were not observed in this ratio (p>0.05). CONCLUSIONS: The increase in the exposure time and in the concentration of NaOCl solution lead to an increase in the tissue dissolution and dentin collagen deproteination. Furthermore, some carbonate ions are removed from the dentin inorganic phase by the NaOCl.

Physicochemical properties and antimicrobial activity of calcium hydroxide pastes in association with other compounds

Aim: This study aimed to evaluate the pH, Ca2+ release, solubility, and antimicrobial activity of calcium hydroxide (Ca(OH)2) pastes in association with different substances. Methods: Sixty acrylic teeth (n=10) were filled with pastes that associated Ca(OH)2 with the following substances: benzalkonium chloride 5% (G1) and 50% (G2) both in propylene glycol, arnica glycolic extract (G3), green tea glycolic extract (G4), Calen/PMCC™ (G5), and Calen™ (G6). In the group G1 to G4 were used 1g of Ca(OH)2 powder with 0,8g of vehicle. pH and Ca2+ release was measured after 7, 15, and 30 days. For solubility, micro-CT was used immediately and at the periods of 7, 15, and 30 days. For the antimicrobial analysis, a biofilm of E. faecalis was induced in vitro on bovine dentin discs. Live/dead viability dye and confocal scanning microscopy were used. Results: The highest pH values occurred on the first 7 days, and the G6, G1, G3, and G5 presented the highest pH values at this period (P <0.05). Ca2+ release was higher in all groups at 7 days, with the highest values observed in G1, G5, and G6. The volume of all pastes showed no significant difference in the intragroup analysis at 7 and 15 days (P <0.05). G1 and G2 showed the highest antimicrobial action (P <0.05). For the biovolume, there was difference between the G6 and the other groups (P >0.05) with G1 presenting the lowest values. Conclusion: Benzalkonium chloride 5% increases the antimicrobial action of the Ca(OH2), without impairs physicochemical properties

Color stability, radiopacity, and chemical characteristics of white mineral trioxide aggregate associated with 2 different vehicles in contact with blood.

INTRODUCTION: Discoloration of mineral trioxide aggregate (MTA) can be exacerbated by the interaction of the cement with body fluids such as blood. This study aimed to analyze the color alteration, chemical characteristics, and radiopacity of MTA manipulated with 2 different vehicles after immersion in blood or distilled water (DW). METHODS: MTA mixed with 100% DW or 80% DW/20% propylene glycol (PG) as vehicles were placed into rubber rings and incubated at 37°C and 100% relative humidity until set. Color assessment and scanning electron microscopy/energy-dispersive spectroscopy analysis were performed after setting and repeated after 7, 15, and 30 days after immersion in blood and DW. Statistical analysis for color alteration and radiopacity was performed using nonparametric Kruskal-Wallis and Dunn tests (P < .05). RESULTS: When 80% DW/20% PG was used as the vehicle, significantly lower color alterations were observed for all time periods compared with 100% DW when immersed in blood (P < .05). All surfaces displayed morphologic changes after immersion in both media because of loss of bismuth. A decrease in radiopacity was observed over time in all groups, with a statistically significant difference after 30 days for groups DW immersed in blood and 80% DW/20% immersed in both media (P < .05). CONCLUSIONS: The ratio of 80% DW/20% PG as a vehicle for MTA results in a lower color alteration when in contact with blood.

Conhecimento dos Professores do Ensino Fundamental Quanto ao Manejo Emergencial de Traumatismo Dentários / Knowledge of Primary School Teachers in Emergency Management of Tooth Injuries

Objetivo: Avaliar o nível de conhecimento e segurança de professores do ensino fundamental para lidar com injúrias traumáticas na dentição permanente, antes e após assistirem uma palestra educativa. Materiais e Métodos: Os dados foram coletados por meio de questionários aplicados aos professores de ensino fundamental do 1º ao 9º ano do município de Mineiros-GO, antes e após assistirem uma palestra sobre traumatismo dentário. A amostra foi composta por 32 professores do ensino fundamental de escolas privadas e estaduais do município. Estes professores responderam a um questionário, o qual primeiramente avaliava o perfil do participante e em uma segunda parte avaliava o conhecimento do mesmo sobre traumatismo dentário. Os dados obtidos foram submetidos à uma análise estatística descritiva, para verificar a frequência das respostas de cada questão antes e após a realização da palestra de orientação. Resultados: Apesar da maioria dos professores apresentar um bom tempo de experiência profissional e ter pós-graduação, 80% dos participantes relataram sentir-se despreparados para agir diante de um trauma dentário. Após as orientações fornecidas nas palestras educativas foram observados resultados bastante positivos, aumentando significativamente, de 12,5% para 46,8%, o número de participantes que se sentia preparado para socorrer um aluno com trauma dentário. Conclusão: A falta de conhecimento dos professores em relação a injúria dentária foi evidente. Desse modo, a realização de palestras educativas para esse público mostra ser de grande valia e imprescindível para o sucesso e longevidade do tratamento.

Objective: To evaluate the level of knowledge and safety of primary school teachers in dealing with traumatic injuries in permanent teeth, before and after attending an educational lecture. Materials and methods: Data were collected through questionnaires applied to primary school teachers from the 1st to the 9th year of the city of Mineiros-GO, before and after attending a lecture on dental injuries. The sample consisted of 32 school teachers from private and state schools. These teachers answered a questionnaire, which first evaluated the participant's profile and in a second part evaluated their knowledge about tooth injuries. The data were submitted to a descriptive statistical analysis, to verify the frequency of the answers of each question before and after the orientation lecture. Results: Even though most teachers have a good amount of professional experience and have a postgraduate degree, 80% of the participants reported feeling unprepared to act in the face of tooth injuries. Following the guidelines provided in the educational lectures were observed quite positive results, significantly increasing, of 12.5% to 46.8%, the number of participants who felt prepared to succor a student with tooth injuries. Conclusion: The teachers' lack of knowledge about dental injuries was evident. Thus, educational lectures for this audience showed to be of great value and essential for the success and longevity of the treatment.

Análise do EDTA tetrassódico associado ao hipoclorito de sódio no preparo biomecânico dos canais radiculares e em protocolos de irrigação final / Analysis of tetrasodium EDTA associated with sodium hypochlorite in the preparation biomechanical parameters of root canals and in final irrigation protocols

Introdução: O objetivo deste estudo foi avaliar a associação do hipoclorito de sódio e EDTANa4 como irrigante comparado ao EDTANa3 quanto a capacidade de limpeza, preparo biomecânico e na irrigação final, associados ou não com a agitação ultrassônica. Materiais e Método: Foram utilizados 40 pré-molares inferiores, instrumentados e analisados em MEV para comprovar a formação de smear-layer. Realizou-se então os protocolos de irrigação utilizando diferentes associações, associadas ou não a agitação ultrassônica. Resultados: O EDTA trissódico agitado ou não com ultrassom, favoreceu limpeza significante (P<0.05) apenas nos terços médio e cervical, enquanto que para o EDTA tetrassódico sem agitação a limpeza foi significante (P<0.05) apenas no terço médio. Comparando os irrigantes, independente do método de irrigação, houve diferença estatisticamente significante (P<0.05) apenas no terço médio na comparação entre o EDTA trissódico pela irrigação convencional e EDTA tetrassódico pela irrigação convencional. Conclusão: O EDTA trissódico favoreceu uma melhor limpeza em relação ao EDTA tetrassódico, principalmente no terço médio. Além disso, a agitação ultrassônica não favoreceu melhor limpeza de parede em relação à irrigação convencional.

AIM: The aim of this study was to evaluate the efficacy of Sodium Hypochlorite associated or not with Tetrasodium EDTA in smear layer removal during root canal preparation. Additionally, to compare the cleaness of dentin walls after a final irrigation of Trisodium EDTA and Sodium Hypochlorite associated with Tetrasodium EDTA, activated or not by utrasonic. Methods: 40 mandibular premolars were used, which were divided in 2 groups (n=20). G1 the root canals were instrumented using Sodium hypochlorite and G2 using Sodium hypochlorite associated with Tetrasodium EDTA. Then, the dentin walls were analyzed by Scanning Electron Microscopy (SEM) to assess presence or not of smear-layer. After this step, it was performed a final irrigation of Trisodium EDTA and Sodium Hypochlorite associated with Tetrasodium EDTA, activated or not by utrasonic. Results: The was no significantly difference between the Sodium Hypochlorite and Sodium Hypochlorite associated with Tetrasodium EDTA during root canal preparation (P>0.05). Regarding the final irrigation, the Trisodium EDTA presented significantly difference when activated ultrasonic in the coronal and middle thirds (P<0.05). The association of Sodium Hypochlorite and Tetrasodium EDTA presented significantly difference only in the middle third without ultrasonic activation (P<0.05). In general, the Trisodium EDTA favoured better smear layer removal than Tetrasodium EDTA. Conclusion: The Trisodium EDTA favored a better smear layer ramoval than Tetrasodium EDTA, mainly in the middle third. In addition, ultrasonic activation improved the smear layer removal in comparison with conventional irrigation.

Do different strains of E. faecalis have the same behavior towards intracanal medications in in vitro research?

Abstract: The aim of this study was to evaluate the antimicrobial action of different endodontic pastes against Enterococcus faecalis ATCC 29212, isolated from the urinary tract, and compare the action with E. faecalis ATCC 4083, isolated from the root canal. For this purpose, dentin blocks were infected for 21 days with both bacteria at different time-intervals to ensure there would be no cross contamination. After this period, blocks were immersed in the test medications for 7 days, according to the following groups: CH/S, CH/P, CH/CMCP, CH/CHX, CH/DAP and TAP. Images of the samples were captured with a confocal microscope and the percentage of live cells was computed by means of the Bioimage program. The ATCC 29212 strain was shown to be more resistant to CH/SS, Calen, CH/DAP, and TAP than the ATCC 4083 strain. The antimicrobial action of the medications against each strain were divergent concerning the order of susceptibility. The authors concluded that the strains behaved in a different manner: in general, those extracted from the urinary tract were more resistant to the tested medications. Therefore, when E. faecalis must be used for in vitro research in endodontics, we suggest the use of ATCC 4083 strain to obtain results that are closer to the clinical reality.

A new weak chelator in endodontics: effects of different irrigation regimens with etidronate on root dentin microhardness.

This study investigated the effect of sodium hypochlorite (NaOCl), ethylenediaminetetraacetic (EDTA), etidronic (HEBP), and citric acid (CA) associated in different irrigation regimens on root dentin microhardness. Forty-five root halves of single-rooted teeth were sectioned into thirds that were embedded in acrylic resin, polished, randomly assigned into 3 groups, and treated as follows: G1: saline solution; G2: 5% NaOCl + 18% HEBP, mixed in equal parts; and G3: 2.5% NaOCl. After measurements, the G3 samples were distributed into subgroups G4, G5, and G6, which were submitted to 17% EDTA, 10% CA and 9% HEBP, respectively. Following the new measurements, these groups received a final flush with 2.5% NaOCl, producing G7, G8, and G9. Microhardness was measured with Knoop indenter under a 25 g load for 15 seconds, before and after treatments. The data were statistically analyzed using paired Student's t-test (α<0.05) to compare values before and after treatments and analysis of variance (ANOVA) (α<0.05) to detect any differences among thirds. Except G1, all tested irrigation regimens significantly decreased the microhardness. There were no differences between root thirds before treatments, and all root thirds exhibited equal responses to same treatment. Except saline, all tested irrigation regimens reduced the root dentin microhardness.

Etidronate from medicine to endodontics: effects of different irrigation regimes on root dentin roughness.

UNLABELLED: An increase in dentin roughness, associated with surface composition, contributes to bacterial adherence in recontaminations. Surface roughness is also important for micromechanical interlocking of dental materials to dentin, and understanding the characteristics of the surface is essential to obtain the adhesion of root canal sealers that have different physico-chemical characteristics. OBJECTIVES: To evaluate the effects of sodium hypochlorite (NaOCl), ethylenediaminetetraacetic (EDTA), etidronic (HEBP), and citric acid (CA) associated with different irrigation regimens on root dentin roughness. MATERIAL AND METHODS: Forty-five root halves of anterior teeth were used. The root parts were sectioned in thirds, embedded in acrylic resin and polished to a standard surface roughness. Initially, the samples of each third were randomly assigned into 3 groups and treated as follows: G1 - saline solution (control); G2 - 5% NaOCl+18% HEBP mixed in equal parts; and G3 - 2.5% NaOCl. After initial measuments, the G3 samples were distributed into subgroups G4, G5 and G6, which were subjected to 17% EDTA, 10% CA and 9% HEBP, respectively. Following the new measuments, these groups received a final flush with 2.5% NaOCl, producing G7, G8 and G9. The dentin surface roughness (Ra) was determined before and after treatments using a profilometer. The Wilcoxon test (α<0.05) was used to compare the values before and after treatments, and the Friedman test (α<0.05) to detect any differences among root thirds. RESULTS: (i) NaOCl did not affect the surface roughness; (ii) there was a significant increase in roughness after the use of chelating agents (P<0.01); and (iii) only the G3 group showed a difference in surface roughness between apical third and other thirds of the teeth (P<0.0043). CONCLUSION: Only the irrigation regimens that used chelating agents altered the roughness of root dentin.

Influence of the instrument used for cervical preflaring on the precision of 2 Eletronic Apex Locators / Influência do instrumento utilizado no preparo cervical na precisão de 2 localizadores apicais eletrônicos

ABSTRACT Objective: This study was aimed at evaluating the influence of cervical preflaring using LA-Axxes No. 1 bur (SybronEndo, Glendora, USA) or S1 and SX ProTaper files (Dentsply Maillefer, Ballaigues, Switzerland) on the accuracy of the Electronic Apex Locators (EALs): Root ZX mini (J. Morita Corporation, Tokyo, Japan), and Joypex 5 (Denjoy, Changsha, China). Methods: Thirty mandibular incisors were accessed, and the root canal length (RCL) was determined with a K-file #15, with the aid of a stereo microscope. Afterwards, the specimens were divided into 2 groups (n = 15) referring to the cervical preflaring with LA-Axxess or ProTaper files. The teeth were embedded in alginate and the RCL was determined by the EALs before and after preflaring. Data were classified into: accurate, if the difference in RCL measurement were ≤0.05 mm; and inaccurate, if the difference were >0.5 mm or beyond the RCL. Results: McNemar's test (α<0.05) was used to detect differences in the accuracy of the EALs before and after each preflaring with different instruments, and to detect difference in accuracy among devices. No differences were found concerning the accuracy of the EALs (P > 0.05) after the cervical preflaring, regardless of the used instrument. Conclusion: The preflaring procedure increased the number of accurate measurements for both EALs, with statistical difference for Joypex 5 when the preflaring was performed with LA-Axxess. However, after the cervical preflaring, the EALs showed similar accuracy, regardless of the used instrument.

RESUMO Objetivo: Avaliar a influência do preparo cervical utilizando a broca LA-Axxess nº 1 (SybronEndo, Glendora, EUA) ou os instrumentos ProTaper S1 e SX (Dentsply Maillefer, Ballaigues, Suíça) na precisão dos Localizadores Apicais Eletrônicos (LAEs): Root ZX mini (J. Morita Corporation, Tóquio, Japão) e Joypex 5 (Denjoy, Changsha, China). Métodos: Trinta incisivos inferiores foram acessados e o comprimento do canal radicular (CCR) determinado com uma lima K #15 com o auxílio de um estereomicroscópio. Em seguida, os dentes foram distribuídos em dois grupos (n=15) referentes ao preparo cervical com LA-Axxess ou instrumentos ProTaper. Os dentes foram incluídos em alginato e o CCR determinado pelos LAEs antes e após o preparo cervical. Os dados foram classificados em: precisos, se a diferença na medida do CCR era ≤ 0,05 mm; e imprecisos, se a diferença era >0,5 mm ou estava além do CCR. Resultados: O teste de McNemar (α<0.05) foi utilizado para detectar diferenças na precisão dos LAEs antes e após o preparo com os diversos instrumentos, e para detectar diferenças na precisão entre os aparelhos. Não foram identificadas diferenças na precisão entre os dois LAEs (P>0,05) após o preparo cervical, indiferente do instrumento utilizado. Conclusão: O preparo cervical aumentou o número de medições precisas dos LAEs, com diferença estatística para Joypex 5 após o uso da LA-Axxess, contudo os aparelhos apresentaram precisão similar após o preparo cervical, indiferente do instrumento utilizado.

Tissue dissolution and modifications in dentin composition by different sodium hypochlorite concentrations

ABSTRACT Sodium hypochlorite (NaOCl) remains the most used irrigation solution during root canal preparation because of characteristics such as wide-spectrum antimicrobial activity and organic tissue dissolution capacity. However, these solutions can alter dentin composition and there is no consensus on the optimal concentration of NaOCl to be used. Objectives To determine the organic matter dissolution and changes in dentin chemical composition promoted by different concentrations of NaOCl over time. Material and Methods: Fragments of bovine muscle tissue were weighed before and after 5, 10, and 15 min of immersion in the groups (n=10): G1- 0.9% saline solution; G2- 1% NaOCl; G3- 2.5% NaOCl; and G4- 5% NaOCl. Bovine dentin fragments were subjected to the same irrigants and absorption spectra were collected by Attenuated Total Reflectance of Fourier Transform Infrared Spectroscopy (ATR-FTIR) before and after 0,5, 1, 2, 3, 5, 8, and 10 min of immersion in the solutions. The ratios of the amide III/phosphate and carbonate/phosphate absorption bands were determined. The tissue dissolution and carbonate/phosphate ratios were submitted to the two-way analysis of variance (ANOVA) with Tukey’s multiple-comparison test (α<0.05) and to the one-way analysis of variance with Tukey’s (α<0.05). The amide III/phosphate ratio was analyzed by Friedman test (α<0.05) and the Kruskal-Wallis test with Dunn’s post-hoc (α<0.05). Results The increase in NaOCl concentration and contact time intensified the dissolution of organic matter and dentin collagen with reduction in the amide III/phosphate ratio. Significant differences between all groups (p<0.05) were observed in the dissolution of organic matter at 10 min and in the amide III/phosphate ratio between the saline solution and 5% NaOCl at 5 min. The carbonate/phosphate ratio decreased significantly in G2, G3, and G4 after 0,5 min of immersion (p<0.05), but more alterations did not occur in the subsequent periods (p>0.05). Intergroup differences were not observed in this ratio (p>0.05). Conclusions The increase in the exposure time and in the concentration of NaOCl solution lead to an increase in the tissue dissolution and dentin collagen deproteination. Furthermore, some carbonate ions are removed from the dentin inorganic phase by the NaOCl.

Smear layer na endodontia, preservar ou remover? / Smear layer in endodontics, preserve or remove?

Introdução: todo canal radicular instrumentado, seja por métodos manuais ou rotatórios, apresentará a formação de uma lama de detritos sobre a parede dentinária, sendo esta composta tanto por matéria orgânica quanto inorgânica, denominada de smear layer. Em relação a sua remoção ou manutenção das paredes do canal, diversos autores apresentaram opiniões e resultados divergentes, gerando dúvidas aos clínicos em relação à conduta mais adequada a ser empregada no tratamento endodôntico. Objetivo: este trabalho, por meio de uma revisão de literatura, visa fornecer uma resposta clara, capaz de melhorar o prognóstico do tratamento. Metodologia: para isso, foram utilizados 25 trabalhos desde o ano de 1975 a 2014, coletados por meio das bases de dados PubMed e Web of Science, com as palavras chaves: "smear layer", "smear layer removal", "smear layer permeability", "smear layer bacteria" e "smear layer sealing". Conclusão: baseado na metodologia proposta pode-se concluir que a remoção da smear layer é a melhor conduta a ser tomada durante o tratamento endodôntico, pois proporciona uma ação antimicrobiana mais eficiente das substâncias irrigadoras e medicações intracanais, além de permitir um melhor selamento entre dentina e material obturador, reduzindo as chances de uma infiltração.

Introduction: the root canal instrumentation, either by manual or mechanicals methods, will result in a formation of debris layer on dentin surface composted by organic and inorganic tissues, denominated smear layer. Due to the several divergent opinion about its removal or maintenance into the root canal, the clinicians may have a doubt for the most appropriate conduct to be performed in endodontics treatments. Objective: this article aimed collect the mains results obtained by different authors to provide a clear answer capable of improving the treatment prognosis. Methods: for this, were used 25 articles since 1975 to 2014 collected by date base PubMed and Web of Science with the keywords "smear layer", "smear layer removal", "smear layer permeability", "smear layer bacteria" and "smear layer sealing". Conclusion: based in the informations obtained in this review, its was concluded that the smear layer removal can, not only, improve the antimicrobial action of the irrigants agents and intracanal medicaments, but also provide a most efficient sealing of the fillingmaterial to dentine wall, reducing the chances to occur a leak in its interface.

Influência do perborato de sódio na desadaptação marginal de tampões cervicais confeccionados com diferentes materiais / Influence of sodium perborate on marginal misfit in cervical barrier made by different materials

Frente aos efeitos deletérios da reabsorção cervical externa, é de grande importância a confecção do tampão cervical quando do clareamento de dentes despolpados. Objetivo: este estudo avaliou a influência do perborato de sódio (PS) e o número de aplicações na desadaptação marginal do tampão cervical. Metodologia: Vinte e quatro pré-molares inferiores foram divididos em três grupos (n=8), de acordo com o material utilizado na confecção do tampão: Cimento de Ionômero de Vidro (CIV), Bioplic (BP) e Agregado de Trióxido Mineral branco (MTA B). Após a aplicação dos materiais, os espécimes foram aplainados e registrados por uma câmera fotográfica acoplada ao Esteromicroscópio. O PS diluído em soro fisiológico foi acomodado sobre os tampões e em seguida selados por 15 dias. Em seguida, o PS foi removido e novas imagens realizadas no Estereomicroscópio. Este ciclo foi repetido, determinando três períodos de avaliação. A desadaptação marginal foi calculada por meio do Software Image J, e os dados submetidos ao teste estatístico de Kruskal-wallis com post-hoc de Dunn para comparação intergrupos (α menor ou igual a 0,05), e teste de Friedman para comparação intragrupos (α menor ou igual a 0,05). Resultados: Verificou-se um aumento significativo na desadaptação marginal do BP e CIV entre os períodos controle e 2ª sessão. Na comparação intergrupos, o MTA B apresentou maior desadaptação quando comparado ao BP em todos os períodos. Conclusão: o PS foi capaz de aumentar a desadaptação marginal de dois materiais após 30 dias, e o MTA B seria o material menos indicado para confecção do tampão cervical...

Due to the deleterious effects of the external cervical resorption, it is extremely important the use of an appropriate cervical barrier in non-vital bleaching. Objective: this study evaluated the influence of sodium perborate (SP) and the number of its application on cervical barrier marginal misfit. Methods: twenty- four human premolars were divided into 3 groups (n=8) according to the material used in manufacture of barrier: Glass Ionomer cement (GIC), Bioplic (BP) and white Mineral Trioxide aggregate (W MTA). After the application of the materials, specimens were planed and registered with a camera mounted in a stereomicroscope. SP diluted in saline was accommodated on the barrier and then sealed for 15 days. Afterwards SP was removed and images were again obtained with stereomicroscope. This cycle was repeated once more, determine three periods of evaluation. Marginal misfit was obtained through Image J software, and the data was subjected to two-way analysis of variance, followed by Tukey post-hoc test (α or less 0,05). Results: there was a significant increase in the marginal misfit of BP and CIV between periods control and 2nd session. In the intergroup comparison, the MTA B showed larger marginal misfit when compared to BP in all periods. Conclusion: the PS was able to increase marginal misfit of 2 materials after 30 days, and the MTA B would be less suitable for making the cervical barrier...

Seladores coronários temporários usados em endodontia: revisão de literatura / Temporary Coronary Sealers used in Endodontics: Literature Review

Entende-se que o selamento coronário é tão importante para o sucesso da terapia endodôntica quanto o próprio tratamento em si, podendo ser considerado parte integral deste. Objetivo: realizar uma revisão de literatura sobre os principais seladores coronários temporários e suas propriedades, para elucidar aos endodontistas e clínicos gerais, qual as melhores opções. Resultados e Discussão: a melhor capacidade de vedamento foi atribuída a materiais fotoativados, cimento de ionômero de vidro e coltosol. Porém, a variação de metodologias encontrados na literatura é grande, tornando difícil suas comparações. Conclusões: existe a necessidade de padronização destes testes, e verificação de sua legitimidade para que possamos ter conclusões concretas sobre o assunto em questão...

It is known that the coronal sealing ability is so important to the endodontic therapy`s success, as the treatment itself, could being considered an integral part of it. Objective: a literature review of the main temporary filling materials and their properties, for the avoidance of the incorrect use of these, by endodontics and general practitioners. Results and Discussion: photoactive material, Ionomer Cement Glass and Coltosol were found to exhibit the best coronal seal. However, variation of regimens used in literature was large, making comparison of reports difficult. Conclusion: it is necessary the standardization of these tests and checking of its legitimacy, so we will have concrete conclusions on the subject in question...

Etidronate from Medicine to Endodontics: effects of different irrigation regimes on root dentin roughness

An increase in dentin roughness, associated with surface composition, contributes to bacterial adherence in recontaminations. Surface roughness is also important for micromechanical interlocking of dental materials to dentin, and understanding the characteristics of the surface is essential to obtain the adhesion of root canal sealers that have different physico-chemical characteristics. OBJECTIVES: To evaluate the effects of sodium hypochlorite (NaOCl), ethylenediaminetetraacetic (EDTA), etidronic (HEBP), and citric acid (CA) associated with different irrigation regimens on root dentin roughness. MATERIAL AND METHODS: Forty-five root halves of anterior teeth were used. The root parts were sectioned in thirds, embedded in acrylic resin and polished to a standard surface roughness. Initially, the samples of each third were randomly assigned into 3 groups and treated as follows: G1 - saline solution (control); G2 - 5% NaOCl+18% HEBP mixed in equal parts; and G3 - 2.5% NaOCl. After initial measuments, the G3 samples were distributed into subgroups G4, G5 and G6, which were subjected to 17% EDTA, 10% CA and 9% HEBP, respectively. Following the new measuments, these groups received a final flush with 2.5% NaOCl, producing G7, G8 and G9. The dentin surface roughness (Ra) was determined before and after treatments using a profilometer. The Wilcoxon test (α<0.05) was used to compare the values before and after treatments, and the Friedman test (α<0.05) to detect any differences among root thirds. RESULTS: (i) NaOCl did not affect the surface roughness; (ii) there was a significant increase in roughness after the use of chelating agents (P<0.01); and (iii) only the G3 group showed a difference in surface roughness between apical third and other thirds of the teeth (P<0.0043). CONCLUSION: Only the irrigation regimens that used chelating agents altered the roughness of root dentin. .