RESUMEN
Achieving strong adhesion in wet environments remains a technological challenge in biomedical applications demanding biocompatibility. Attention for adhesive motifs meeting such demands has largely been focused on marine organisms. However, bioadhesion to inorganic surfaces is also present in the human body, in the hard tissues of teeth and bones, and is mediated through serines (S). The specific amino acid sequence DpSpSEEKC has been previously suggested to be responsible for the strong binding abilities of the protein statherin to hydroxyapatite, where pS denotes phosphorylated serine. Notably, similar sequences are present in the non-collagenous bone protein osteopontin (OPN) and the mussel foot protein 5 (Mefp5). OPN has previously been shown to promote fracture toughness and physiological damage formation. Here, we investigated the adhesion strength of the motif D(pS)(pS)EEKC on substrates of hydroxyapatite, TiO2, and mica using atomic force microscopy (AFM) single-molecule force spectroscopy (SMFS). Specifically, we investigated the dependence of adhesion force on phosphorylation of serines by comparing findings with the unphosphorylated variant DSSEEKC. Our results show that high adhesion forces of over 1 nN on hydroxyapatite and on TiO2 are only present for the phosphorylated variant D(pS)(pS)EEKC. This warrants further exploitation of this motif or similar residues in technological applications. Further, the dependence of adhesion force on phosphorylation suggests that biological systems potentially employ an adhesion-by-demand mechanism via expression of enzymes that up- or down-regulate phosphorylation, to increase or decrease adhesion forces, respectively.
RESUMEN
Extracellular matrix stiffness has a profound effect on the behavior of many cell types. Adherent cells apply contractile forces to the material on which they adhere and sense the resistance of the material to deformation-its stiffness. This is dependent on both the elastic modulus and the thickness of the material, with the corollary that single cells are able to sense underlying stiff materials through soft hydrogel materials at low (<10 µm) thicknesses. Here, we hypothesized that cohesive colonies of cells exert more force and create more hydrogel deformation than single cells, therefore enabling them to mechanosense more deeply into underlying materials than single cells. To test this, we modulated the thickness of soft (1 kPa) elastic extracellular-matrix-functionalized polyacrylamide hydrogels adhered to glass substrates and allowed colonies of MG63 cells to form on their surfaces. Cell morphology and deformations of fluorescent fiducial-marker-labeled hydrogels were quantified by time-lapse fluorescence microscopy imaging. Single-cell spreading increased with respect to decreasing hydrogel thickness, with data fitting to an exponential model with half-maximal response at a thickness of 3.2 µm. By quantifying cell area within colonies of defined area, we similarly found that colony-cell spreading increased with decreasing hydrogel thickness but with a greater half-maximal response at 54 µm. Depth-sensing was dependent on Rho-associated protein kinase-mediated cellular contractility. Surface hydrogel deformations were significantly greater on thick hydrogels compared to thin hydrogels. In addition, deformations extended greater distances from the periphery of colonies on thick hydrogels compared to thin hydrogels. Our data suggest that by acting collectively, cells mechanosense rigid materials beneath elastic hydrogels at greater depths than individual cells. This raises the possibility that the collective action of cells in colonies or sheets may allow cells to sense structures of differing material properties at comparatively large distances.
Asunto(s)
Mecanotransducción Celular , Línea Celular Tumoral , Elasticidad , Matriz Extracelular/metabolismo , Humanos , Modelos Biológicos , Seudópodos/metabolismo , Análisis de la Célula Individual , Quinasas Asociadas a rho/metabolismoRESUMEN
Photodegradable hydrogels have emerged as useful platforms for research on cell function, tissue engineering, and cell delivery as their physical and chemical properties can be dynamically controlled by the use of light. The photo-induced degradation of such hydrogel systems is commonly based on the integration of photolabile o-nitrobenzyl derivatives to the hydrogel backbone, because such linkers can be cleaved by means of one- and two-photon absorption. Herein we describe a cytocompatible click-based hydrogel containing o-nitrobenzyl ester linkages between a hyaluronic acid backbone, which is photodegradable in the presence of cells. It is demonstrated for the first time that by using a cyclic benzylidene ketone-based small molecule as photosensitizer the efficiency of the two-photon degradation process can be improved significantly. Biocompatibility of both the improved two-photon micropatterning process as well as the hydrogel itself is confirmed by cell culture studies.
Asunto(s)
Compuestos de Bencilideno/química , Materiales Biocompatibles/química , Ácido Hialurónico/química , Hidrogeles/química , Fotólisis , Polietilenglicoles/química , Línea Celular , Química Clic , Humanos , Células Madre Mesenquimatosas/citología , Nitrobencenos/química , Fotones , Fármacos Fotosensibilizantes/química , Compuestos de Sulfhidrilo/química , Ingeniería de TejidosRESUMEN
Age- and disease (osteoporotic fractured and osteoarthritic tissue)-related changes in the distribution of cortical bone were examined, using a multimodality approach, including measurement of local density, geometry and mechanical properties, where changes in these properties can give rise to instability and increasing probability of fracture. In contrast to the majority of previously reported research, this study also focuses on the characteristic non-circular femoral neck cross-sectional geometry and variation in bone mineral density (BMD) around the femoral neck. Twenty-two osteoarthritic and 7 osteoporotic femoral neck slices, collected from elective and trauma-related arthroplasty, and 16 cadaveric donor tissue controls were tested mechanically using Reference Point Indentation (BioDent™, Active Life Technologies®, Santa Barbara, CA) and then scanned with in vitro-based radiography intended to replicate the dual-energy X-ray absorptiometry technique. All parameters were measured regionally around the circumference of the femoral neck, allowing examination of spatial variability within the cortical bone. Fractured tissue was less resistant to indentation in the thinner superolateral segment compared to other segments and other groups. BMD around the fractured femoral necks appeared more consistent than that of nonfractured tissue, where BMD was reduced in the superolateral segment for the other groups. Cortical bone was thin in the superolateral segment for all groups except for the osteoarthritic group, and was thicker in the inferomedial segment for both osteoarthritic and fractured groups, resulting in the largest variation in buckling ratio (ratio of cortical bone diameter to cortical bone thickness) around the femoral neck for the fractured group. With age, healthy controls appeared to have lower inferomedial cortical thickness, whereas no significant differences in Reference Point Indentation measurements and density were observed. The study has highlighted several (both quality- and quantity-related) parameters that may be used to improve prediction of fracture risk.
Asunto(s)
Densidad Ósea , Hueso Cortical/fisiopatología , Fracturas del Cuello Femoral/fisiopatología , Cuello Femoral/fisiopatología , Osteoartritis/fisiopatología , Osteoporosis/fisiopatología , Absorciometría de Fotón/métodos , Adulto , Anciano , Anciano de 80 o más Años , Fenómenos Biomecánicos , Fuerza Compresiva , Hueso Cortical/diagnóstico por imagen , Hueso Cortical/patología , Femenino , Fracturas del Cuello Femoral/diagnóstico por imagen , Fracturas del Cuello Femoral/patología , Cuello Femoral/diagnóstico por imagen , Cuello Femoral/patología , Humanos , Masculino , Persona de Mediana EdadRESUMEN
Bacterial infections of central venous catheters (CVCs) cause much morbidity and mortality, and are usually diagnosed by concordant culture of blood and catheter tip. However, studies suggest that culture often fails to detect biofilm bacteria. This study optimizes X-ray micro-focus computed tomography (X-ray µCT) for the quantification and determination of distribution and heterogeneity of biofilms in in vitro CVC model systems.Bacterial culture and scanning electron microscopy (SEM) were used to detect Staphylococcus epidermidis ATCC 35984 biofilms grown on catheters in vitro in both flow and static biofilm models. Alongside this, X-ray µCT techniques were developed in order to detect biofilms inside CVCs. Various contrast agent stains were evaluated using energy-dispersive X-ray spectroscopy (EDS) to further optimize these methods. Catheter material and biofilm were segmented using a semi-automated matlab script and quantified using the Avizo Fire software package. X-ray µCT was capable of distinguishing between the degree of biofilm formation across different segments of a CVC flow model. EDS screening of single- and dual-compound contrast stains identified 10 nm gold and silver nitrate as the optimum contrast agent for X-ray µCT. This optimized method was then demonstrated to be capable of quantifying biofilms in an in vitro static biofilm formation model, with a strong correlation between biofilm detection via SEM and culture. X-ray µCT has good potential as a direct, non-invasive, non-destructive technology to image biofilms in CVCs, as well as other in vivo medical components in which biofilms accumulate in concealed areas.
Asunto(s)
Biopelículas , Infecciones Relacionadas con Catéteres/microbiología , Catéteres Venosos Centrales/microbiología , Infecciones Estafilocócicas/microbiología , Staphylococcus epidermidis/fisiología , Humanos , Infecciones Estafilocócicas/diagnóstico por imagen , Staphylococcus epidermidis/ultraestructura , TomografíaRESUMEN
The SRY-box containing transcription factor Sox17 is required for endoderm formation and vascular morphogenesis during embryonic development. In the lung, Sox17 is expressed in mesenchymal progenitors of the embryonic pulmonary vasculature and is restricted to vascular endothelial cells in the mature lung. Conditional deletion of Sox17 in splanchnic mesenchyme-derivatives using Dermo1-Cre resulted in substantial loss of Sox17 from developing pulmonary vascular endothelial cells and caused pulmonary vascular abnormalities before birth, including pulmonary vein varices, enlarged arteries, and decreased perfusion of the microvasculature. While survival of Dermo1-Cre;Sox17Δ/Δ mice (herein termed Sox17Δ/Δ) was unaffected at E18.5, most Sox17Δ/Δ mice died by 3 weeks of age. After birth, the density of the pulmonary microvasculature was decreased in association with alveolar simplification, biventricular cardiac hypertrophy, and valvular regurgitation. The severity of the postnatal cardiac phenotype was correlated with the severity of pulmonary vasculature abnormalities. Sox17 is required for normal formation of the pulmonary vasculature and postnatal cardiovascular homeostasis.
Asunto(s)
Proteínas HMGB/metabolismo , Pulmón/irrigación sanguínea , Pulmón/embriología , Factores de Transcripción SOXF/metabolismo , Animales , Arterias/anomalías , Diferenciación Celular , Células Endoteliales/metabolismo , Eliminación de Gen , Proteínas HMGB/genética , Mesodermo/citología , Mesodermo/embriología , Mesodermo/metabolismo , Ratones , Ratones Endogámicos C57BL , Ratones Noqueados , Venas Pulmonares/anomalías , Proteínas Represoras/genética , Factores de Transcripción SOXF/genética , Proteína 1 Relacionada con Twist/genéticaRESUMEN
Staphylococcus epidermidis biofilm formation is responsible for the persistence of orthopedic implant infections. Previous studies have shown that exposure of S. epidermidis biofilms to sub-MICs of antibiotics induced an increased level of biofilm persistence. BODIPY FL-vancomycin (a fluorescent vancomycin conjugate) and confocal microscopy were used to show that the penetration of vancomycin through sub-MIC-vancomycin-treated S. epidermidis biofilms was impeded compared to that of control, untreated biofilms. Further experiments showed an increase in the extracellular DNA (eDNA) concentration in biofilms preexposed to sub-MIC vancomycin, suggesting a potential role for eDNA in the hindrance of vancomycin activity. Exogenously added, S. epidermidis DNA increased the planktonic vancomycin MIC and protected biofilm cells from lethal vancomycin concentrations. Finally, isothermal titration calorimetry (ITC) revealed that the binding constant of DNA and vancomycin was 100-fold higher than the previously reported binding constant of vancomycin and its intended cellular d-Ala-d-Ala peptide target. This study provides an explanation of the eDNA-based mechanism of antibiotic tolerance in sub-MIC-vancomycin-treated S. epidermidis biofilms, which might be an important factor for the persistence of biofilm infections.
Asunto(s)
Antibacterianos/farmacología , Biopelículas/efectos de los fármacos , ADN Bacteriano/farmacología , Staphylococcus epidermidis/efectos de los fármacos , Vancomicina/antagonistas & inhibidores , Antibacterianos/metabolismo , Biopelículas/crecimiento & desarrollo , Transporte Biológico/efectos de los fármacos , Compuestos de Boro/química , ADN Bacteriano/metabolismo , Colorantes Fluorescentes/química , Pruebas de Sensibilidad Microbiana , Microscopía Confocal , Solubilidad , Coloración y Etiquetado , Staphylococcus epidermidis/fisiología , Vancomicina/metabolismo , Vancomicina/farmacologíaRESUMEN
Toward the development of microparticulate carriers for nasal administration, N-trimethylchitosan chloride (TMC) of low molecular weight (LMW) and high molecular weight (HMW) and low degree of quaternization (16% and 27%, respectively) was co-formulated into microparticles comprising of dipalmatoylphosphatidylcholine (DPPC) and poly(lactic-co-glycolic) acid (PLGA) via the spray-drying technique. The chitosan derivatives were characterized by means of nuclear magnetic resonance (NMR), differential scanning calorimetry (DSC), and Fourier transfrom infrared (FTIR) spectroscopy. The size and morphology of the produced microparticles were assessed by scanning electron microscopy (SEM), whereas their mucoadhesive properties were investigated by means of atomic force microscopy-force spectroscopy (AFM-FS). The results showed that microparticles exhibit mucoadhesion when TMC is present on their surface above a threshold of TMC (>0.3% w/w).
Asunto(s)
Quitosano/química , Portadores de Fármacos/química , Microesferas , Administración Intranasal , Quitosano/administración & dosificación , Quitosano/síntesis química , Portadores de Fármacos/administración & dosificación , Portadores de Fármacos/síntesis química , Electrólitos/química , Microscopía de Fuerza Atómica , Peso Molecular , Tamaño de la Partícula , Polímeros/química , Propiedades de SuperficieRESUMEN
Strength is the most widely reported parameter with regards to bone failure. However, bone contains pre-existing damage and stress concentration sites, perhaps making measures of fracture toughness more indicative of the resistance of the tissue to withstand fracture. Several toughening mechanisms have been identified in bone, prominently, at the microscale. More recently, nanoscale toughness mechanisms, such as sacrificial-bonds and hidden-length or dilatational band formation, mediated by noncollagenous proteins, have been reported. Absence of specific noncollagenous proteins results in lowered fracture toughness in animal models. Further, roles of several other, putative influencing, factors such as closely bound water, collagen cross-linking and citrate bonds in bone mineral have also been proposed. Yet, it is still not clear if and which mechanisms are hallmarks of osteoporosis disease and how they influence fracture risk. Further insights on the workings of such influencing factors are of high importance for developing complementary diagnostics and therapeutics strategies.
Asunto(s)
Huesos/metabolismo , Fracturas Óseas/metabolismo , Osteoporosis/metabolismo , Fenómenos Biomecánicos , Huesos/ultraestructura , HumanosRESUMEN
The response of bone tissue to mechanical load is complex and includes plastic hardening, viscosity and damage. The quantification of these effects plays a mayor role in bone research and in biomechanical clinical trials as to better understand related diseases. In this study, the damage growth in individual wet human trabeculae subjected to cyclic overloading is quantified by inverse rheological modeling. Therefore, an already published rheological material model, that includes linear elasticity, plasticity and viscosity is extended by a damage law. The model is utilized in an optimization process to identify the corresponding material parameters and damage growth in single human trabeculae under tensile load. Results show that the damage model is leading to a better fit of the test data with an average root-mean-square-error (RMSE) of 2.52 MPa compared to the non-damage model with a RMSE of 3.03 MPa. Although this improvement is not significant, the damage model qualitatively better represents the data as it accounts for the visible stiffness reduction along the load history. It returns realistic stiffness values of 11.92 GPa for the instantaneous modulus and 5.73 GPa for the long term modulus of wet trabecular human bone. Further, the growth of damage in the tissue along the load history is substantial, with values above 0.8 close to failure. The relative loss of stiffness per cycle is in good agreement with comparable literature. Inverse rheological modeling proves to be a valuable tool for quantifying complex constitutive behavior from a single mechanical measurement. The evolution of damage in the tissue can be identified continuously over the load history and separated from other effects.
Asunto(s)
Huesos , Hueso Esponjoso , Humanos , Estrés Mecánico , Elasticidad , Reología , Fenómenos BiomecánicosRESUMEN
Graphical Abstract.
RESUMEN
Collagen fibrils are fundamental to the mechanical strength and function of biological tissues. However, they are susceptible to changes from non-enzymatic glycation, resulting in the formation of advanced glycation end-products (AGEs) that are not reversible. AGEs accumulate with aging and disease and can adversely impact tissue mechanics and cell-ECM interactions. AGE-crosslinks have been related, on the one hand, to dysregulation of collagen fibril stiffness and damage and, on the other hand, to altered collagen net surface charge as well as impaired cell recognition sites. While prior studies using Kelvin probe force microscopy (KPFM) have shown the effect glycation has on collagen fibril surface potential (i.e., net charge), the combined effect on individual and isolated collagen fibril mechanics, hydration, and surface potential has not been documented. Here, we explore how methylglyoxal (MGO) treatment affects the mechanics and surface potential of individual and isolated collagen fibrils by utilizing atomic force microscopy (AFM) nanoindentation and KPFM. Our results reveal that MGO treatment significantly increases nanostiffness, alters surface potential, and modifies hydration characteristics at the collagen fibril level. These findings underscore the critical impact of AGEs on collagen fibril physicochemical properties, offering insights into pathophysiological mechanical and biochemical alterations with implications for cell mechanotransduction during aging and in diabetes. STATEMENT OF SIGNIFICANCE: Collagen fibrils are susceptible to glycation, the irreversible reaction of amino acids with sugars. Glycation affects the mechanical properties and surface chemistry of collagen fibrils with adverse alterations in biological tissue mechanics and cell-ECM interactions. Current research on glycation, at the level of individual collagen fibrils, is sparse and has focused either on collagen fibril mechanics, with contradicting evidence, or surface potential. Here, we utilized a multimodal approach combining Kelvin probe force (KPFM) and atomic force microscopy (AFM) to examine how methylglyoxal glycation induces structural, mechanical, and surface potential changes on the same individual and isolated collagen fibrils. This approach helps inform structure-function relationships at the level of individual collagen fibrils.
RESUMEN
Here, an artificial intelligence (AI)-based approach was employed to optimize the production of electrospun scaffolds for in vivo wound healing applications. By combining polycaprolactone (PCL) and poly(ethylene glycol) (PEG) in various concentration ratios, dissolved in chloroform (CHCl3) and dimethylformamide (DMF), 125 different polymer combinations were created. From these polymer combinations, electrospun nanofiber meshes were produced and characterized structurally and mechanically via microscopic techniques, including chemical composition and fiber diameter determination. Subsequently, these data were used to train a neural network, creating an AI model to predict the optimal scaffold production solution. Guided by the predictions and experimental outcomes of the AI model, the most promising scaffold for further in vitro analyses was identified. Moreover, we enriched this selected polymer combination by incorporating antibiotics, aiming to develop electrospun nanofiber scaffolds tailored for in vivo wound healing applications. Our study underscores three noteworthy conclusions: (i) the application of AI is pivotal in the fields of material and biomedical sciences, (ii) our methodology provides an effective blueprint for the initial screening of biomedical materials, and (iii) electrospun PCL/PEG antibiotic-bearing scaffolds exhibit outstanding results in promoting neoangiogenesis and facilitating in vivo wound treatment.
RESUMEN
Collagen fibrils are the fundamental structural elements in vertebrate animals and compose a structural framework that provides mechanical support to load-bearing tissues. Understanding how these fibrils initially form and mechanically function has been the focus of a myriad of detailed investigations over the last few decades. From these studies a great amount of knowledge has been acquired as well as a number of new questions to consider. In this review, we examine the current state of our knowledge of the mechanical properties of extant fibrils. We emphasize on the mechanical response and related deformation of collagen fibrils upon tension, which is the predominant load imposed in most collagen-rich tissues. We also illuminate the gaps in knowledge originating from the intriguing results that the field is still trying to interpret. STATEMENT OF SIGNIFICANCE: Collagen is the result of millions of years of biological evolution and is a unique family of proteins, the majority of which provide mechanical support to biological tissues. Cells produce collagen molecules that self-assemble into larger structures, known as collagen fibrils. As simple as they appear under an optical microscope, collagen fibrils display a complex ultrastructural architecture tuned to the external forces that are imposed upon them. Even more complex is the way collagen fibrils deform under loading, and the nature of the mechanisms that drive their formation in the first place. Here, we present a cogent synthesis of the state-of-knowledge of collagen fibril mechanics. We focus on the information we have from in vitro experiments on individual, isolated from tissues, collagen fibrils and the knowledge available from in silico tests.
Asunto(s)
Colágeno , Matriz Extracelular , Animales , Fenómenos Biomecánicos , Colágeno/química , Matriz Extracelular/metabolismo , Soporte de Peso , MicroscopíaRESUMEN
Collagen fibrils are the basic structural building blocks that provide mechanical properties such as stiffness, toughness, and strength to tissues from the nano- to the macroscale. Collagen fibrils are highly hydrated and transient deformation mechanisms contribute to their mechanical behavior. One approach to describe and quantify the apparent viscoelastic behavior of collagen fibrils is to find rheological models and fit the resulting empirical equations to experimental data. In this study, we consider a nonlinear rheological Maxwell model for this purpose. The model was fitted to tensile stress-time data from experiments conducted in a previous study on hydrated and partially dehydrated individual collagen fibrils via AFM. The derivative tensile modulus, estimated from the empirical equation, increased for decreasing hydration of the collagen fibril. The viscosity is only marginally affected by hydration but shows a dependency with strain rate, suggesting thixotropic behavior for low strain rates.
Asunto(s)
Colágeno , Estrés Mecánico , Fenómenos Biomecánicos , Viscosidad , Resistencia a la TracciónRESUMEN
Bone is a biological tissue with unique mechanical properties, owing to a complex hierarchical structure ranging from the nanoscale up to the macroscale. To better understand bone mechanics, investigation of mechanical properties of all structural elements at every hierarchical level and how they interact is necessary. Testing of bone structures at the lower microscale, e.g. bone lamellae, has been least performed and remains a challenge. Focused ion beam (FIB) milling is an attractive technique for machining microscopic samples from bone material and performing mechanical testing at the microscale using atomic force microscopy (AFM) and nanoindentation setups. So far, reported studies at this length scale have been performed on bone samples of animal origin, mostly in a dehydrated state, except for one study. Here we present an AFM-based microbeam bending method for performing bending measurements in both dehydrated and rehydrated conditions at the microscale. Single lamella bone microbeams of four human donors, aged 65-94 yrs, were machined via FIB and tested both in air and fully submerged in Hank's Balanced Salt Solution (HBSS) to investigate the effect of (de)hydration and to a certain extent, of age, on bone mechanics. Bending moduli were found to reduce up to 5 times after 2 h of rehydration and no trend of change in bending moduli with respect to age could be observed. Mechanical behavior changed from almost purely elastic to viscoelastic upon rehydration and a trend of lower dissipated energy in samples from older donors could be observed in the rehydrated state. These results confirm directly the importance of water for the mechanical properties of bone tissue at the microscale. Moreover, the trend of lowered capability of energy dissipation in older donors may contribute to a decrease of fracture toughness and thus an increase in bone fragility with age.
Asunto(s)
Huesos , Fémur , Anciano , Hueso Cortical , HumanosRESUMEN
Fibrin hydrogels have proven highly suitable scaffold materials for skeletal muscle tissue engineering in the past. Certain parameters of those types of scaffolds, however, greatly affect cellular mechanobiology and therefore the myogenic outcome. The aim of this study was to identify the influence of apparent elastic properties of fibrin scaffolds in 2D and 3D on myoblasts and evaluate if those effects differ between murine and human cells. Therefore, myoblasts were cultured on fibrin-coated multiwell plates ("2D") or embedded in fibrin hydrogels ("3D") with different elastic moduli. Firstly, we established an almost linear correlation between hydrogels' fibrinogen concentrations and apparent elastic moduli in the range of 7.5 mg/ml to 30 mg/ml fibrinogen (corresponds to a range of 7.7-30.9 kPa). The effects of fibrin hydrogel elastic modulus on myoblast proliferation changed depending on culture type (2D vs 3D) with an inhibitory effect at higher fibrinogen concentrations in 3D gels and vice versa in 2D. The opposite effect was evident in differentiating myoblasts as shown by gene expression analysis of myogenesis marker genes and altered myotube morphology. Furthermore, culture in a 3D environment slowed down proliferation compared to 2D, with a significantly more pronounced effect on human myoblasts. Differentiation potential was also substantially impaired upon incorporation into 3D gels in human, but not in murine, myoblasts. With this study, we gained further insight in the influence of apparent elastic modulus and culture type on cellular behavior and myogenic outcome of skeletal muscle tissue engineering approaches. Furthermore, the results highlight the need to adapt parameters of 3D culture setups established for murine cells when applied to human cells.
RESUMEN
Collagen is the major structural protein in human bodies constituting about 30% of the entire protein mass. Through a self-assembly process, triple helical collagen molecules assemble into high aspect-ratio fibers of tens to hundreds of nanometer diameter, known as collagen fibrils (CFs). In the last decade, several methods for tensile testing these CFs emerged. However, these methods are either overly time-consuming or offer low data acquisition bandwidth, rendering dynamic investigation of tensile properties impossible. Here, we describe a novel instrument for tensile testing of individual CFs. CFs are furnished with magnetic beads using a custom magnetic tweezer. Subsequently, CFs are lifted by magnetic force, allowing them to be picked-up by a microgripper structure, which is mounted on a cantilever-based interferometric force probe. A piezo-lever actuator is used to apply tensile displacements and to perform tensile tests of tethered CFs, after alignment. Once the mechanical tests are finished, CFs are removed from the microgripper by application of a magnetic field. Our novel instrument enables tensile tests with at least 25-fold increased throughput compared to tensile testing with an atomic force microscope while achieving force resolution (p-p) of 10 nN at a strain resolution better than 0.1%.
Asunto(s)
Colágeno , Humanos , Microscopía de Fuerza Atómica/métodos , Piel , Resistencia a la TracciónRESUMEN
Extracellular matrix (ECM) stiffening with downstream activation of mechanosensitive pathways is strongly implicated in fibrosis. We previously reported that altered collagen nanoarchitecture is a key determinant of pathogenetic ECM structure-function in human fibrosis (Jones et al., 2018). Here, through human tissue, bioinformatic and ex vivo studies we provide evidence that hypoxia-inducible factor (HIF) pathway activation is a critical pathway for this process regardless of the oxygen status (pseudohypoxia). Whilst TGFß increased the rate of fibrillar collagen synthesis, HIF pathway activation was required to dysregulate post-translational modification of fibrillar collagen, promoting pyridinoline cross-linking, altering collagen nanostructure, and increasing tissue stiffness. In vitro, knockdown of Factor Inhibiting HIF (FIH), which modulates HIF activity, or oxidative stress caused pseudohypoxic HIF activation in the normal fibroblasts. By contrast, endogenous FIH activity was reduced in fibroblasts from patients with lung fibrosis in association with significantly increased normoxic HIF pathway activation. In human lung fibrosis tissue, HIF-mediated signalling was increased at sites of active fibrogenesis whilst subpopulations of human lung fibrosis mesenchymal cells had increases in both HIF and oxidative stress scores. Our data demonstrate that oxidative stress can drive pseudohypoxic HIF pathway activation which is a critical regulator of pathogenetic collagen structure-function in fibrosis.
Asunto(s)
Colágeno/fisiología , Fibrosis Pulmonar/metabolismo , Biomarcadores , Células Cultivadas , Colágeno/química , Fibroblastos/metabolismo , Regulación de la Expresión Génica/fisiología , Humanos , Factor 1 Inducible por Hipoxia , Oxigenasas de Función Mixta/genética , Oxigenasas de Función Mixta/metabolismo , Estrés Oxidativo/fisiología , Proteínas Represoras/genética , Proteínas Represoras/metabolismo , Factor de Crecimiento Transformador beta/genética , Factor de Crecimiento Transformador beta/metabolismoRESUMEN
Ageing, disease and osteoporosis treatment have been linked to accumulation of microdamage, which is caused by repetitive loading and may eventually causes fatigue failure of bones. Post-hoc investigations for in vivo loading and in vitro experiments have been developed to better understand microdamage formation. In this context, previous studies were not able to discriminate the effects caused by structural changes of the trabecular network from differences of tissue/material properties on microdamage formation. In the present study a fatigue test protocol was established to induce microdamage at a defined tensile stress state of individual trabeculae. Further, a thorough analysis of microdamage analysis was presented for 2D and 3D confocal images, enabling a comparison between the tissue and the meso-scale. Eight individual trabeculae were tested for 1500 cycles, six for 2100 cycles and seven for 3000 cycles (close to failure). Microdamage increased slowly from 1500 to 2100 cycles and showed a rapid increase at 3000 cycles. Diffuse damage was mainly present, although also linear microcracks were visible at 2100 and 3000 cycles. Average microcrack length was 93 µm and diffuse damage density was 4.4% for samples tested for 3000 cycles, comparable to previous studies on trabecular bone cores. Only one to three large microdamage sites were observed in the central region, connected to the trabecular surface with small straight cracks. The presented procedure is a first step to better understand how microdamage formation is influenced by material properties in aged and diseased bone, independently of deteriorated trabecular microarchitecture.