High-sensitivity fiber-tip acoustic sensor with ultrathin gold diaphragm.

Miniature acoustic sensors with high sensitivity are highly desired for applications in medical photoacoustic imaging, acoustic communications and industrial nondestructive testing. However, conventional acoustic sensors based on piezoelectric, piezoresistive and capacitive detectors usually require a large element size on a millimeter to centimeter scale to achieve a high sensitivity, greatly limiting their spatial resolution and the application in space-confined sensing scenarios. Herein, by using single-crystal two-dimensional gold flakes (2DGFs) as the sensing diaphragm of an extrinsic Fabry-Perot interferometer on a fiber tip, we demonstrate a miniature optical acoustic sensor with high sensitivity. Benefiting from the ultrathin thickness (∼8 nm) and high reflectivity of the 2DGF, the fiber-tip acoustic sensor gives an acoustic pressure sensitivity of ∼300 mV/Pa in the frequency range from 100 Hz to 20 kHz. The noise-equivalent pressure of the fiber-tip acoustic sensor at the frequency of 13 kHz is as low as 62.8 µPa/Hz1/2, which is one or two orders of magnitude lower than that of reported optical acoustic sensors with the same size.

Atomically Smooth Single-Crystalline Platform for Low-Loss Plasmonic Nanocavities.

Nanoparticle-on-mirror plasmonic nanocavities, capable of extreme optical confinement and enhancement, have triggered state-of-the-art progress in nanophotonics and development of applications in enhanced spectroscopies. However, the optical quality factor and thus performance of these nanoconstructs are undermined by the granular polycrystalline metal films (especially when they are optically thin) used as a mirror. Here, we report an atomically smooth single-crystalline platform for low-loss nanocavities using chemically synthesized gold microflakes as a mirror. Nanocavities constructed using gold nanorods on such microflakes exhibit a rich structure of plasmonic modes, which are highly sensitive to the thickness of optically thin (down to ∼15 nm) microflakes. The microflakes endow nanocavities with significantly improved quality factor (∼2 times) and scattering intensity (∼3 times) compared with their counterparts based on deposited films. The developed low-loss nanocavities further allow for the integration with a mature platform of fiber optics, opening opportunities for realizing nanocavity-based miniaturized photonic devices for practical applications.

Large second-order susceptibility from a quantized indium tin oxide monolayer.

Due to their high optical transparency and electrical conductivity, indium tin oxide thin films are a promising material for photonic circuit design and applications. However, their weak optical nonlinearity has been a substantial barrier to nonlinear signal processing applications. In this study, we show that an atomically thin (~1.5 nm) indium tin oxide film in the form of an air/indium tin oxide/SiO2 quantum well exhibits a second-order susceptibility χ2 of ~1,800 pm V-1. First-principles calculations and quantum electrostatic modelling point to an electronic interband transition resonance in the asymmetric potential energy of the quantum well as the reason for this large χ2 value. As the χ2 value is more than 20 times higher than that of the traditional nonlinear LiNbO3 crystal, our indium tin oxide quantum well design can be an important step towards nonlinear photonic circuit applications.

Large area single crystal gold of single nanometer thickness for nanophotonics.

Two-dimensional single crystal metals, in which the behavior of highly confined optical modes is intertwined with quantum phenomena, are highly sought after for next-generation technologies. Here, we report large area (>104 µm2), single crystal two-dimensional gold flakes (2DGFs) with thicknesses down to a single nanometer level, employing an atomic-level precision chemical etching approach. The decrease of the thickness down to such scales leads to the quantization of the electronic states, endowing 2DGFs with quantum-confinement-augmented optical nonlinearity, particularly leading to more than two orders of magnitude enhancement in harmonic generation compared with their thick polycrystalline counterparts. The nanometer-scale thickness and single crystal quality makes 2DGFs a promising platform for realizing plasmonic nanostructures with nanoscale optical confinement. This is demonstrated by patterning 2DGFs into nanoribbon arrays, exhibiting strongly confined near infrared plasmonic resonances with high quality factors. The developed 2DGFs provide an emerging platform for nanophotonic research and open up opportunities for applications in ultrathin plasmonic, optoelectronic and quantum devices.

Fast Fabrication of WS2/Bi2Se3 Heterostructures for High-Performance Photodetection.

Two-dimensional (2D) material heterostructures have attracted considerable attention owing to their interesting and novel physical properties, which expand the possibilities for future optoelectronic, photovoltaic, and nanoelectronic applications. A portable, fast, and deterministic transfer technique is highly needed for the fabrication of heterostructures. Herein, we report a fast half-wet poly(dimethylsiloxane) (PDMS) transfer process utilizing the change of adhesion energy with the help of micron-sized water droplets. Using this method, a vertical stacking of the WS2/Bi2Se3 heterostructure with a straddling band configuration is successfully assembled on a fluorophlogopite substrate. Thanks to the complementary band gaps and high efficiency of interfacial charge transfer, the photodetector based on the heterostructure exhibits a superior responsivity of 109.9 A W-1 for a visible incident light at 473 nm and 26.7 A W-1 for a 1064 nm near-infrared illumination. Such high photoresponsivity of the heterostructure demonstrates that our transfer method not only owns time efficiency but also ensures high quality of the heterointerface. Our study may open new pathways to the fast and massive fabrication of various vertical 2D heterostructures for applications in twistronics/valleytronics and other band engineering devices.

Atomically Smooth Gold Microflake-Enabled Fiber-Tip Fabry-Perot Interferometer for Temperature and Pressure Sensing.

Fiber-tip sensors based on the Fabry-Perot interferometer (FPI) are one of the most widely used devices for temperature and pressure measurements in space-confined scenarios. However, the deposited metal films with a polycrystalline structure tend to form microcracks under strain, which can undermine the optical quality factor and thus sensing performance of these fiber-tip sensors. Here, we demonstrate an atomically smooth gold microflake (GMF)-enabled fiber-tip FPI sensor with a Q factor as high as 628. Benefiting from the high reflectivity and flexibility of GMFs and the elasticity of the PDMS spacer, the fiber-tip FPI can maintain stable sensing performance under large deformation. For temperature sensing, the fiber-tip sensor exhibits a linear response to the temperature in the range 28-40 °C with a sensitivity as high as 1.74 nm °C-1. To realize linear and sensitive pressure sensing, we design and fabricate a PDMS clamped-beam structure on the fiber tip using a soft lithography technique, achieving a sensitivity of 11.48 nm kPa-1. Moreover, simultaneous measurement of the temperature and pressure is also demonstrated using the wavelength demodulation method. The simple and cost-effective fabrication of the clamped beam and the transferable GMFs allow for the facile integration of high-quality FP cavities on fiber tips, opening new opportunities for developing optical sensors with miniaturized sizes.