RESUMEN
Postpolymerization modification offers a versatile strategy for synthesizing complex macromolecules, yet modifying acrylamide polymers like poly(N,N-dimethylacrylamide) (PDMA) is notoriously challenging due to the inherent stability and low reactivity of amide bonds. In this study, we unveil a novel approach for the direct transamidation of PDMA, leveraging recent advances in the transamidation of unactivated tertiary amide substrates. By exploiting photoiniferter polymerization, we extended this direct transamidation approach to ultrahigh-molecular-weight (UHMW) PDMA, showcasing the unprecedented postpolymerization modification of synthetic polymers exceeding 106 g/mol. We also designed acrylamide copolymers comprising both the moderately reactive N-methyl-N-phenyl tertiary amides, along with the less reactive, fully alkyl-substituted N,N-dimethyl amides inherent to PDMA. This disparate reactivity enabled a sequential, chemoselective transamidation by initially targeting the more reactive pendant aryl amides with less nucleophilic aromatic amines, and second, transamidating the untouched N,N-dimethyl amide moieties with more nucleophilic aliphatic amines, yielding a uniquely diversified acrylamide copolymer. This work not only broadens the scope of postpolymerization modification strategies by pioneering direct transamidation of unactivated amides but also provides a robust platform for the design of intricate macromolecules, particularly in the realm of UHMW polymers.
RESUMEN
The spontaneous condensation of amines with ß-triketones (TK), forming ß,ß'-diketoenamines (DKE) and releasing water as the sole byproduct, exhibits many of the hallmarks of "click" reactions. Such characteristics render TKs as a highly advantageous platform for efficient polymer diversification, even in biological contexts. Leveraging reversible addition-fragmentation chain transfer (RAFT) and photoiniferter polymerization of novel TK-containing vinylic monomers, we synthesized polymers containing pendent TKs with excellent control of molecular weights, even in excess of 106 g mol-1. Under mild, catalyst-free conditions, poly(ß-triketone methacrylate) could be modified with a diverse scope of amines containing a plethora of functional groups. The high efficiency of this functionalization approach was further emphasized when grafting-to with poly(ethylene glycol)-amine resulting in bottlebrushes with molecular weights reaching 2.0 × 107 g mol-1. Critically, while the formed DKE linkages are stable under ambient conditions, they undergo catalyst-free, dynamic transamination at elevated temperatures, paving the way for associative covalent adaptable networks. Overall, we introduce pendent triketone moieties into methacrylate and acrylamide polymers, establishing a novel postpolymerization modification technique that facilitates catalyst-free ligation of amines under highly permissible conditions.
RESUMEN
Many synthetic polymers used to form polymer-brush films feature a main backbone with functional, oligomeric side chains. While the structure of such graft polymers mimics biomacromolecules to an extent, it lacks the monodispersity and structural purity present in nature. Here we demonstrate that side-chain heterogeneity within graft polymers significantly influences hydration and the occurrence of hydrophobic interactions in the subsequently formed brushes and consequently impacts fundamental interfacial properties. This is demonstrated for the case of poly(methacrylate)s (PMAs) presenting oligomeric side chains of different length (n) and dispersity. A precise tuning of brush structure was achieved by first synthesizing oligo(2-ethyl-2-oxazoline) methacrylates (OEOXMAs) by cationic ring-opening polymerization (CROP), subsequently purifying them into discrete macromonomers with distinct values of n by column chromatography, and finally obtaining poly[oligo(2-ethyl-2-oxazoline) methacrylate]s (POEOXMAs) by reversible addition-fragmentation chain-transfer (RAFT) polymerization. Assembly of POEOXMA on Au surfaces yielded graft polymer brushes with different side-chain dispersities and lengths, whose properties were thoroughly investigated by a combination of variable angle spectroscopic ellipsometry (VASE), quartz crystal microbalance with dissipation (QCMD), and atomic force microscopy (AFM) methods. Side-chain dispersity, or dispersity within brushes, leads to assemblies that are more hydrated, less adhesive, and more lubricious and biopassive compared to analogous films obtained from graft polymers characterized by a homogeneous structure.
RESUMEN
Cyclic macromolecules do not feature chain ends and are characterized by a higher effective intramolecular repulsion between polymer segments, leading to a higher excluded-volume effect and greater hydration with respect to their linear counterparts. As a result of these unique properties, hydrogels composed of cross-linked cyclic polymers feature enhanced mechanical strength while simultaneously incorporating more solvent with respect to networks formed from their linear analogues with identical molar mass and chemical composition. The translation of topology effects by cyclic polymers into the properties of polymer networks provides hydrogels that ideally do not include defects, such as dangling chain ends, and display unprecedented physicochemical characteristics.
Asunto(s)
Hidrogeles , Oxazoles , Peso Molecular , PolímerosRESUMEN
Double-network (DN) hydrogels are fabricated from poly(2-ethyl-2-oxazoline) (PEOXA)-peptide conjugates, which can be enzymatically crosslinked in the presence of Sortase A (SA), and physical networks of alginate (Alg), yielding matrices with improved mechanical properties with respect to the corresponding PEOXA and Alg single networks and excellent cell viability of encapsulated human auricular chondrocytes (hACs). The addition of a low content of cellulose nanofibrils (CNFs) within DN hydrogel formulations provides the rheological properties needed for extrusion-based three-dimensional (3D) printing, generating constructs with a good shape fidelity. In the presence of hACs, PEOXA-Alg-CNF prehydrogel mixtures can be bioprinted, finally generating 3D-structured DN hydrogel supports showing a cell viability of more than 90%. Expanding the application of poly(2-alkyl-2-oxazoline)-based formulations in the design of tissue-engineering constructs, this study further demonstrates how SA-mediated enzymatic crosslinking represents a suitable and fully orthogonal method to generate biocompatible hydrogels with fast kinetics.
Asunto(s)
Bioimpresión , Cartílago/metabolismo , Condrocitos/metabolismo , Hidrogeles , Impresión Tridimensional , Ingeniería de Tejidos , Andamios del Tejido/química , Aminoaciltransferasas/química , Proteínas Bacterianas/química , Cartílago/citología , Supervivencia Celular , Células Cultivadas , Condrocitos/citología , Cisteína Endopeptidasas/química , Humanos , Hidrogeles/síntesis química , Hidrogeles/químicaRESUMEN
Functional block copolymers based on poly(2-oxazoline)s are versatile building blocks for the fabrication of dual-drug delivery nanoparticles (NPs) for anticancer chemotherapy. Core-shell NPs are fabricated from diblock copolymers featuring a long and hydrophilic poly(2-methyl-2-oxazoline) (PMOXA) block coupled to a relatively short and functionalizable poly(2-methylsuccinate-2-oxazoline) (PMestOXA) segment. The PMOXA block stabilizes the NP dispersions, whereas the PMestOXA segment is used to conjugate pterostilbene, a natural bioactive phenolic compound that is used as lipophilic model-drug and constitutes the hydrophobic core of the designed NPs. Subsequent loading of the NPs with clofazimine (CFZ), an inhibitor of the multidrug resistance pumps typically expressed in a large variety of cancer cells, provides an additional function to their formulation. Optimization of the copolymer composition allows the design of polymer scaffolds showing low toxicity and capable of assembling into highly stable NPs dispersions at physiologically relevant pH. In addition, the incorporation of CFZ increases the stability of the NPs and stimulates their internalization by RAW 264.7 cells.
Asunto(s)
Antineoplásicos/administración & dosificación , Antineoplásicos/química , Sistemas de Liberación de Medicamentos , Nanopartículas/química , Oxazoles/química , Estilbenos/química , Animales , Antineoplásicos/farmacología , Espectroscopía de Resonancia Magnética con Carbono-13 , Clofazimina/administración & dosificación , Clofazimina/farmacología , Resistencia a Múltiples Medicamentos/efectos de los fármacos , Interacciones Hidrofóbicas e Hidrofílicas , Ratones , Nanopartículas/administración & dosificación , Espectroscopía de Protones por Resonancia Magnética , Células RAW 264.7 , Espectrofotometría UltravioletaRESUMEN
Grafting synthetic polymers to inorganic and organic surfaces to yield polymer "brushes" has represented a revolution in many fields of materials science. Polymer brushes provide colloidal stabilization to nanoparticles (NPs), prevent and/or regulate the adsorption of proteins on biomaterials, and significantly reduce friction when applied to two surfaces sheared against each other. Can the performance of polymer brushes as steric stabilizers and boundary lubricants be improved? The answer to this question encompasses the application of polymer grafts presenting different chain topologies, beyond linearity. In particular, grafted polymers forming loops and cycles at the surface have been recently demonstrated to enable the modulation of interfacial physicochemical properties, including nanomechanical and nanotribological, to an extent that is difficultly addressed by using their linear counterparts. Loop and cyclic polymer brushes provide enhanced steric stabilization to surfaces, increase their biopassivity and show superlubricious behavior. Their distinctive structure, the methods applied to fabricate them and their application in several technologically relevant fields of materials science are reviewed in this contribution.
RESUMEN
The cyclic polymer topology strongly alters the interfacial, physico-chemical properties of polymer brushes, when compared to the linear counterparts. In this study, we especially concentrated on poly-2-ethyl-2-oxazoline (PEOXA) cyclic and linear grafts assembled on titanium oxide surfaces by the "grafting-to" technique. The smaller hydrodynamic radius of ring PEOXAs favors the formation of denser brushes with respect to linear analogs. Denser and more compact cyclic brushes generate a steric barrier that surpasses the typical entropic shield by a linear brush. This phenomenon, translates into an improved resistance towards biological contamination from different protein mixtures. Moreover, the enhancement of steric stabilization coupled to the intrinsic absence of chain ends by cyclic brushes, produce surfaces displaying a super-lubricating character when they are sheared against each other. All these topological effects pave the way for the application of cyclic brushes for surface functionalization, enabling the modulation of physico-chemical properties that could be just marginally tuned by applying linear grafts.
RESUMEN
We report the controlled synthesis of ultra-high molecular weight (UHMW) polymers (Mn ≥ 106 g/mol) via continuous flow in a tubular reactor. At high monomer conversion, UHMW polymers in homogeneous batch polymerization exhibit high viscosities that pose challenges for employing continuous flow reactors. However, under heterogeneous inverse miniemulsion (IME) conditions, UHMW polymers can be produced within the dispersed phase, while the viscosity of the heterogeneous mixture remains approximately the same as the viscosity of the continuous phase. Conducting such IME polymerizations in flow results in a faster rate of polymerization compared to batch IME polymerizations while still providing excellent control over molecular weight up to 106 g/mol. Crucial emulsion parameters, such as particle size and stability under continuous flow conditions, were examined using dynamic light scattering. A range of poly(N,N-dimethylacrylamide) and poly(4-acryloylmorpholine) polymers with molecular weights of 104-106 g/mol (D ≤ 1.31) were produced by this method using water-soluble trithiocarbonates as photoiniferters.
RESUMEN
Poly(2-alkyl-2-oxazoline)s (PAOXAs) have been rapidly emerging as starting materials in the design of tissue engineering supports and for the generation of platforms for cell cultures, especially in the form of hydrogels. Thanks to their biocompatibility, chemical versatility and robustness, PAOXAs now represent a valid alternative to poly(ethylene glycol)s (PEGs) and their derivatives in these applications, and in the formulation of bioinks for three-dimensional (3D) bioprinting. In this review, we summarize the recent literature where PAOXAs have been used as main components for hydrogels and biofabrication mixtures, especially highlighting how their easily tunable composition could be exploited to fabricate multifunctional biomaterials with an extremely broad spectrum of properties.
Asunto(s)
Bioimpresión , Hidrogeles , Materiales Biocompatibles , Polietilenglicoles , Impresión Tridimensional , Ingeniería de TejidosRESUMEN
Polymer composition and topology of surface-grafted polyacids determine the amplitude of their pH-induced swelling transition. The intrinsic steric constraints characterizing cyclic poly(2-carboxypropyl-2-oxazoline) (c-PCPOXA) and poly(2-carboxyethyl-2-oxazoline) (c-PCEOXA) forming brushes on Au surfaces induce an enhancement in repulsive interactions between charged polymer segments upon deprotonation, leading to an amplified expansion and a significant increment in swelling with respect to their linear analogues of similar molar mass. On the other hand, it is the composition of polyacid grafts that governs their hydration in both undissociated and ionized forms, determining the degree of swelling during their pH-induced transition.
Asunto(s)
Polímeros , Concentración de Iones de Hidrógeno , Peso Molecular , PolielectrolitosRESUMEN
The physicochemical properties of cyclic polymer adsorbates are significantly influenced by the steric and conformational constraints introduced during their cyclization. These translate into a marked difference in interfacial properties between cyclic polymers and their linear counterparts when they are grafted onto surfaces yielding nanoassemblies or polymer brushes. This difference is particularly clear in the case of cyclic polymer brushes that are designed to chemically interact with the surrounding environment, for instance, by associating with biological components present in the medium, or, alternatively, through a response to a chemical stimulus by a significant change in their properties. The intrinsic architecture characterizing cyclic poly(2-oxazoline)-based polyacid brushes leads to a broad variation in swelling and nanomechanical properties in response to pH change, in comparison with their linear analogues of identical composition and molecular weight. In addition, cyclic glycopolymer brushes derived from polyacids reveal an enhanced exposure of galactose units at the surface, due to their expanded topology, and thus display an increased lectin-binding ability with respect to their linear counterparts. This combination of amplified responsiveness and augmented protein-binding capacity renders cyclic brushes invaluable building blocks for the design of "smart" materials and functional biointerfaces.
Asunto(s)
Polímeros , Conformación Molecular , Peso Molecular , Unión Proteica , Propiedades de SuperficieRESUMEN
Three-dimensional (3D) control over the placement of bioactive cues is fundamental to understand cell guidance and develop engineered tissues. Two-photon patterning (2PP) provides such placement at micro- to millimeter scale, but nonspecific interactions between proteins and functionalized extracellular matrices (ECMs) restrict its use. Here, a 2PP system based on nonfouling hydrophilic photocages and Sortase A (SA)-based enzymatic coupling is presented, which offers unprecedented orthogonality and signal-to-noise ratio in both inert hydrogels and complex mammalian matrices. Improved photocaged peptide synthesis and protein functionalization protocols with broad applicability are introduced. Importantly, the method enables 2PP in a single step in the presence of fragile biomolecules and cells, and is compatible with time-controlled growth factor presentation. As a corollary, the guidance of axons through 3D-patterned nerve growth factor (NGF) within brain-mimetic ECMs is demonstrated. The approach allows for the interrogation of the role of complex signaling molecules in 3D matrices, thus helping to better understand biological guidance in tissue development and regeneration.
Asunto(s)
Matriz Extracelular/química , Factor de Crecimiento Nervioso/química , Aminoaciltransferasas/química , Aminoaciltransferasas/metabolismo , Animales , Axones/química , Axones/metabolismo , Proteínas Bacterianas/química , Proteínas Bacterianas/metabolismo , Cumarinas/química , Cisteína Endopeptidasas/química , Cisteína Endopeptidasas/metabolismo , Matriz Extracelular/metabolismo , Ácido Hialurónico/química , Hidrogeles/química , Microscopía de Fluorescencia por Excitación Multifotónica , Factor de Crecimiento Nervioso/metabolismo , FotonesRESUMEN
Polymer-topology effects can alter technologically relevant properties when cyclic macromolecules are applied within diverse materials formulations. These include coatings, polymer networks, or nanostructures for delivering therapeutics. While substituting linear building blocks with cyclic analogues in commonly studied materials is itself of fundamental interest, an even more fascinating observation has been that the introduction of physical or chemical boundaries (e.g., a grafting surface or cross-links) can amplify the topology-related effects observed when employing cyclic polymer-based precursors for assembling multidimensional objects. Hence, the application of cyclic polymers has enabled the fabrication of coatings with enhanced biorepellency and superior lubricity, broadened the tuning potential for mechanical properties of polymer networks, increased the thermodynamic stability, and altered the capability of loading and releasing drugs within polymeric micelles.
RESUMEN
Molecularly designed, random copolymer-bioconjugates based on poly(2-methyl-2-oxazoline) (PMOXA) and poly(2-ethyl-2-oxazoline) (PEOXA) are crosslinked in the presence of sortase A (SA) and human articular chondrocytes (hACs), to yield cellularized polymer networks. Their gelation kinetics and mechanical properties are finely tuned by varying the concentration of SA, while a cell viability >90% is achieved after several weeks of culture, even in the absence of any cell-adhesive cue.
RESUMEN
While topology effects by cyclic polymers in solution and melts are well-known, their translation into the interfacial properties of polymer "brushes" provides new opportunities to impart enhanced surface lubricity and biopassivity to inorganic surfaces, above and beyond that expected for linear analogues of identical composition. The impact of polymer topology on the nanotribological and protein-resistance properties of polymer brushes is revealed by studying linear and cyclic poly(2-ethyl-2-oxazoline) (PEOXA) grafts presenting a broad range of surface densities and while shearing them alternatively against an identical brush or a bare inorganic surface. The intramolecular constraints introduced by the cyclization provide a valuable increment in both steric stabilization and load-bearing capacity for cyclic brushes. Moreover, the intrinsic absence of chain ends within cyclic adsorbates hinders interpenetration between opposing brushes, as they are slid over each other, leading to a reduction in the friction coefficient (µ) at higher pressures, a phenomenon not observed for linear grafts. The application of cyclic polymers for the modification of inorganic surfaces generates films that outperform both the nanotribological and biopassive properties of linear brushes, significantly expanding the design possibilities for synthetic biointerfaces.