Accuracy of augmented reality-assisted vs template-guided apicoectomy - an ex vivo comparative study.

AIM: The aim of the present ex vivo study was to examine the accuracy of augmented reality-assisted apicoectomies (AR-A) versus template-guided apicoectomies (TG-A). MATERIALS AND METHODS: In total, 40 apicoectomies were performed in 10 cadaver pig mandibles. Every pig mandible underwent two AR-A and two TG-A in molar and premolar teeth. A crossed experimental design was applied. AR-A was performed using Microsoft HoloLens 2, and TG-A using SMOP software. Postoperative CBCT scans were superimposed with the presurgical planning data. The deviation between the virtually planned apicoectomy and the surgically performed apicoectomy was measured. The primary (angular deviation [degrees]) and secondary (depth deviation [mm]) outcome parameters were measured. RESULTS: Overall, 36 out of 40 apicoectomies could be included in the study. Regarding the primary outcome parameter (angular deviation), there was no significant difference between AR-A and TG-A. The mean values were 5.33 degrees (± 2.96 degrees) in the AR-A group, and 5.23 degrees (± 2.48 degrees) in the TG-A group. The secondary outcome parameter (depth deviation) showed no significant difference between the AR-A group of 0.27 mm (± 2.32 mm) and the TG-A group of 0.90 mm (± 1.84 mm). In this crossed experimental design, both techniques overshot the target depth in posterior sites, as opposed to not reaching the target depth in anterior sites (P < 0.001). CONCLUSION: Augmented reality (AR) technology has the potential to be introduced into apicoectomy surgery in case further development is implemented.

Preoperative visualization of the lingual nerve by 3D double-echo steady-state MRI in surgical third molar extraction treatment.

OBJECTIVES: To assess the lingual nerve (LN) visualization using a 3D double-echo steady-state MRI sequence (3D-DESS). MATERIALS AND METHODS: Three readers prospectively evaluated the LN for its continuous visibility in 3D-DESS MRI in 19 patients with an indication for removal of mandibular impacted third molars, using a 5-point scale (4 = excellent to 0 = none). Six LN anatomical intermediate points (IP) were selected and checked for their detectability by a 4-point scale (4 = yes to1 = no). Inter- and intra-rater agreement was evaluated using intraclass correlation coefficient and percentage of agreement. RESULTS: The average nerve continuity score was 3.3 ± 0.46. In 35% of the cases, the entire course was continuously visible. In 10%, the proximal and 60%, the distal part of the nerve was not continuously visible. Inter- and intra-reader agreement was good (ICC = 0.76, ICC = 0.75). The average detectability score of all IP was 3.7 ± 0.41. From IP1 to IP5, the detectability was excellent; meanwhile, IP6 had lower visibility. The inter- and intra-reader percentage of agreement was 77% and 87%. CONCLUSIONS: The 3D-DESS sequence allowed accurate and continuous visualization of the LN with high reproducibility in more than one-third of the patients. This could improve the preoperative clarification of the LN position and thereby reduce complications during dentoalveolar surgical interventions. CLINICAL RELEVANCE: 3D-DESS MRI might be beneficial in clinical scenarios where the second molar is elongated or presents a difficult rotational position while simultaneously having a close positional relationship to the third molar. Thereby, osteotomy performed more lingually, indicating extended lingual flap detachment may increase the risk of LN damage.

FDG-PET/CT for oral focus assessment in head and neck cancer patients.

OBJECTIVES: To compare oral and maxillo-mandibular inflammatory foci on standard oral radiographs (OPT, periapical radiograph) with available fluorine-18-labelled fluoro-2-deoxy-D-glucose-positron emission tomography/computed tomography (FDG-PET/CT) data and to discuss whether additional metabolic information derived from FDG-PET/CT can support oral care specialists when performing oral focus examinations. MATERIALS AND METHODS: Data from 23 patients with head and neck cancer who underwent FDG-PET/CT and panoramic and periapical radiography in close succession before first-line radiotherapy and/or chemotherapy were included in this exploratory retrospective study. Periapical lesions and marginal periodontal inflammation on FDG-PET/CT scans and standard oral radiographs were analysed and compared with regard to metabolic activity on FDG-PET/CT in comparison to recorded clinical symptoms and radiological scores. Additionally, inflammatory maxillo-mandibular pathologies were analysed using FDG-PET/CT. RESULTS: The maximum standardised uptake value (SUVmax) in FDG-avid marginal periodontal sites could not be conclusively associated with the radiologically recorded severity of marginal bone loss, but a potential positive correlation was identified. No association was found either between the metabolic activity of periapical lesions and their extent, as recorded on standard oral radiographs, or regarding clinical symptoms (percussion test). Most maxillo-mandibular pathologies did not show increased FDG uptake. CONCLUSIONS: FDG-PET/CT provided additional metabolic information that can help clinicians identify lesions with increased inflammatory activity. The incorporation of available oral FDG-PET/CT findings into the primary oral focus assessment may allow for more accurate oral focus treatment. CLINICAL RELEVANCE: FDG-PET/CT provides valuable metabolic information for oral care specialists. The detection of inflammatory oral processes using FDG-PET/CT facilitates treatment.

Diagnostic Accuracy of Cystic Lesions Using a Pre-Programmed Low-Dose and Standard-Dose Dental Cone-Beam Computed Tomography Protocol: An Ex Vivo Comparison Study.

BACKGROUND: This study aimed to analyze the diagnostic reliability of radiographic assessment of cystic lesions using a pre-set, manufacturer-specific, low-dose mode compared to a standard-dose dental cone-beam computed tomography (CBCT) imaging protocol. METHODS: Forty pig mandible models were prepared with cystic lesions and underwent both CBCT protocols on an Orthophos SL Unit (Dentsply-Sirona, Bensheim, Germany). Qualitative and quantitative analysis of CBCT data was performed by twelve investigators independently in SIDEXIS 4 (Dentsply-Sirona) using a trial-specific digital examination software tool. Thereby, the effect of the two dose types on overall detectability rate, the visibility on a scale of 1 (very low) to 10 (very high) and the difference between measured radiographic and actual lesion size was assessed. RESULTS: Low-dose CBCT imaging showed no significant differences considering detectability (78.8% vs. 81.6%) and visibility (9.16 vs. 9.19) of cystic lesions compared to the standard protocol. Both imaging protocols performed very similarly in lesion size assessment, with an apparent underestimation of the actual size. CONCLUSION: Low-dose protocols providing confidential diagnostic evaluation with an improved benefit-risk ratio according to the ALADA principle could become a promising alternative as a primary diagnostic tool as well as for radiological follow-up in the treatment of cystic lesions.

Development and application of a 3D periodontal in vitro model for the evaluation of fibrillar biomaterials.

BACKGROUND: Periodontitis is a chronic inflammation of the tooth supporting structures that finally can lead to tooth loss. As chronic periodontitis is associated with systemic diseases multiple approaches have been followed to support regeneration of the destructed tissue. But very few materials are actually used in the clinic. A new and promising group of biomaterials with advantageous biomechanical properties that have the ability to support periodontal regeneration are self-assembling peptides (SAP). However, there is still a lack of 3D periodontal models that can evaluate the migration potential of such novel materials. METHODS: All experiments were performed with primary human periodontal ligament fibroblasts (HPLF). Migration capacity was assessed in a three-dimensional model of the human periodontal ligament by measuring the migration distance of viable cells on coated (Enamel Matrix Protein (EMP), P11-4, collagen I) or uncoated human dentin. Cellular metabolic activity on P11-4 hydrogels was assessed by a metabolic activity assay. Deposition of ECM molecules in a P11-4 hydrogel was visualized by immunostaining of collagen I and III and fibrillin I. RESULTS: The 3D periodontal model was feasible to show the positive effect of EMP for periodontal regeneration. Subsequently, self-assembling peptide P11-4 was used to evaluate its capacity to support regenerative processes in the 3D periodontal model. HPLF coverage of the dentin surface coated with P11-4 increased significantly over time, even though delayed compared to EMP. Cell viability increased and inclusion of ECM proteins into the biomaterial was shown. CONCLUSION: The presented results indicate that the 3D periodontal model is feasible to assess periodontal defect coverage and that P11-4 serves as an efficient supporter of regenerative processes in the periodontal ligament. CLINICAL RELEVANCE: The establishment of building-block synthetic polymers offers new opportunities for clinical application in dentistry. Self-assembling peptides represent a new generation of biomaterials as they are able to respond dynamically to the changing environment of the biological surrounding. Especially in the context of peri-implant disease prevention and treatment they enable the implementation of new concepts.

Guided apicoectomy using a CAD/CAM drilling template.

AIM: Modern microsurgical techniques have increased the success rate of apicoectomy relative to that of traditional approaches. This case report introduces a novel workaround for guided apicoectomy using a patient-specific computer-aided design/computer-aided manufacturing (CAD/CAM) three-dimensional (3D)-printed template. MATERIALS AND METHODS: Apicoectomy was performed on the mesial root of tooth 36 using template-guided trephine drilling, followed by retrograde filling with mineral trioxide aggregate (MTA). Initially, a cone beam computed tomography (CBCT) scan and an intraoral surface scan were imported into the planning software. After superimposition, virtual planning was performed to determine the exact localization for root resection. Subsequently, a tooth-supported drilling template was designed and 3D printed. Endodontic microsurgical approaches, including root-end cavity preparation and root-end filling, completed the surgical treatment. RESULT: The apical resection was easily feasible. There were no postoperative complications. Radiological assessment after a 6-month period showed signs of reossification. CONCLUSION: Guided apicoectomy allowed precise root resection, suggesting that this technique may be advantageous in complex anatomical situations.

Dental Magnetic Resonance Imaging in Implant Surgery - Status Quo and Outlook / [Dentale Magnetresonanztomographie in der Implantatchirurgie].

Numerous technical advances in magnetic resonance imaging have opened up promising new approaches in dentomaxillofacial radiology in recent years. With its ability to simultaneously visualize soft and hard tissues, MRI has the potential to become an innovative method for accurate diagnosis and planning of dental implants. Dental MRI is already a valuable and useful complement to conventional X-ray imaging techniques and could further minimize the risks of surgery by optimizing existing treatment protocols. Considering current efforts in dentistry to reduce radiation exposure and take a further step toward personalized oral diagnostics that consider patient-specific factors, this article reviews the capabilities of dentomaxillofacial MR imaging in implant surgery. It highlights the various applications of MRI in dental implant surgery and evaluates both the benefits and the clinical challenges. Overall, considering the specific indications and limitations of MR sequences, dental MRI represents a further significant advance in individualized treatment planning in dentistry. It allows consideration of parameters not visualized by conventional imaging techniques and is particularly useful for evaluating surgically relevant parameters, especially those related to soft tissue.

Patient-specific beta-tricalcium phosphate scaffold for customized alveolar ridge augmentation: a case report : Case Report: patient-specific ß-TCP scaffold for alveolar ridge CBR.

BACKGROUND: Beta-tricalcium phosphate (ß-TCP) is a biocompatible ceramic material widely used in the field of oral regeneration. Due to its excellent biological and mechanical properties, it is increasingly utilized for alveolar ridge augmentation or guided bone regeneration (GBR). With recent advances in computer-aided design and manufacturing (CAD/CAM), ß-TCP can now be used in the form of digitally designed patient-specific scaffolds for customized bone regeneration (CBR) of advanced defects in a two-stage implant therapy concept. In this case report following the CARE case report guidelines, we present a novel application of a patient-specific ß-TCP scaffold in pre-implant mandibular alveolar ridge augmentation. CASE PRESENTATION: A 63-year-old female patient with significant horizontal bone loss in the posterior mandible was treated with a custom ß-TCP scaffold in the context of a two-stage backward-planned implant therapy. Cone-beam computed tomography nine months after augmentation showed successful integration of the scaffold into the surrounding bone, allowing implant placement. Follow-up until two years after initial surgery showed excellent oral and peri-implant health. CONCLUSIONS: This case highlights the potential of patient-specific ß-TCP scaffolds for alveolar ridge augmentation and their advantage over traditional techniques, including avoidance of xeno-, allo-, and autografts. The results provide encouraging evidence for their use in clinical practice. Patient-specific ß-TCP scaffolds may be a promising alternative for clinicians seeking to provide their patients with safe, predictable, and effective alveolar ridge augmentation results in customized bone regeneration procedures.

Preoperative imaging in third molar surgery - A prospective comparison of X-ray-based and radiation-free magnetic resonance orthopantomography.

This study aimed to compare preoperative data relevant to third molar surgery based on radiographic orthopantomography (OPG) and orthopantomogram-like MR images (MR-OPG), using five different MR protocols. X-ray-based OPG and OPG-like MRI reconstructions from DESS, SPACE-STIR, SPACE-SPAIR, T1-VIBE-Dixon, and UTE sequences were acquired in 11 patients undergoing third molar surgery, using a 15-channel mandibular coil. Qualitative (image quality, susceptibility to artifacts, positional relationship, contact/non-contact of the inferior alveolar nerve (IAN), relationship to maxillary sinus, IAN continuity, root morphology) and quantitative (tooth length, retromolar distance, distance to the IAN, and distance to the mandible margin) parameters of the maxillary and mandibular third molars were assessed regarding inter-reader agreement and quantitative discrepancies by three calibrated readers. Radiation-free MR-OPGs generated within clinically tolerable acquisition times, which exhibited high image quality and low susceptibility to artifacts, showed no significant differences compared with X-ray-based OPGs regarding the assessment of quantitative parameters. UTE MR-OPGs provided radiographic-like images and were best suited for assessing qualitative preoperative data (positional relationship, nerve contact/non-contact, and dental root morphology) relevant to third molar surgery. For continuous and focal nerve imaging, DESS MR-OPG was superior. MR-OPGs could represent a shift towards indication-specific and modality-oriented perioperative imaging in high-risk oral and maxillofacial surgery.

Magnetic resonance imaging in dental implant surgery: a systematic review.

PURPOSE: To comprehensively assess the existing literature regarding the rapidly evolving in vivo application of magnetic resonance imaging (MRI) for potential applications, benefits, and challenges in dental implant surgery. METHODS: Electronic and manual searches were conducted in PubMed MEDLINE, EMBASE, Biosis, and Cochrane databases by two reviewers following the PICOS search strategy. This involved using medical subject headings (MeSH) terms, keywords, and their combinations. RESULTS: Sixteen studies were included in this systematic review. Of the 16, nine studies focused on preoperative planning and follow-up phases, four evaluated image-guided implant surgery, while three examined artifact reduction techniques. The current literature highlights several MRI protocols that have recently investigated and evaluated the in vivo feasibility and accuracy, focusing on its potential to provide surgically relevant quantitative and qualitative parameters in the assessment of osseointegration, peri-implant soft tissues, surrounding anatomical structures, reduction of artifacts caused by dental implants, and geometric accuracy relevant to implant placement. Black Bone and MSVAT-SPACE MRI, acquired within a short time, demonstrate improved hard and soft tissue resolution and offer high sensitivity in detecting pathological changes, making them a valuable alternative in targeted cases where CBCT is insufficient. Given the data heterogeneity, a meta-analysis was not possible. CONCLUSIONS: The results of this systematic review highlight the potential of dental MRI, within its indications and limitations, to provide perioperative surgically relevant parameters for accurate placement of dental implants.

Magnetic resonance imaging for preoperative diagnosis in third molar surgery: a systematic review.

In recent years, magnetic resonance imaging (MRI) has made great strides through various technical improvements and new sequences, which have made it one of the most promising and leading imaging techniques in the head and neck region. As modern imaging techniques in dentistry aim to reduce radiation exposure, this systematic review evaluated the possibilities, advantages, and disadvantages of advanced imaging diagnostics using dental MRI and its evidence for clinical indications and limitations relevant to mandibular third molar (MTM) surgery. Two reviewers performed multiple database searches (PubMed MEDLINE, EMBASE, Biosis, and Cochrane databases) following the PICOS search strategy using medical subject headings (MeSH) terms, keywords, and their combinations. Ten studies were included in this systematic review. By providing high spatial resolution and excellent soft tissue contrast, black bone MRI sequences such as 3D Double Echo Steady State (DESS) and 3D Short Tau Inversion Recovery (STIR) imaging protocols have the potential to become a valuable alternative to cone-beam computed tomography (CBCT) in future dental clinical routines. Overall, radiation-free MRI represents another step toward personalized dentistry and improved decision-making that avoids ineffectiveness and minimizes risks in oral surgery by taking into account additional patient-side factors such as comorbidity, anatomical norm variations, and imaging biomarkers.

Comparison of Geometric Accuracy of Low-Dose and Standard-Dose Dental CBCT Imaging Protocols in CAD/CAM-Guided Dental Implant Surgery

PURPOSE: This preclinical comparison study assessed the diagnostic accuracy of low-dose CBCT protocols compared with standard-dose protocols in digital implant treatment planning and template-guided implant surgery. MATERIALS AND METHODS: Thirty mandibles of pig cadavers underwent both CBCT protocols on an Orthophos SL Unit (Dentsply-Sirona). Surface scans of the regions of interest were performed to create a digital diagnostic wax-up followed by 120 subsequent implant plannings (one implant per quadrant). Simple randomization (1:1) was assessed to assign each quadrant into one of the imaging protocols. Sixty implant surgical guides were manufactured using CAD/CAM technology, followed by the fully guided placement of 60 implants following the surgical protocol in randomized order. Geometric accuracy between the planned and definitive implant position was determined regarding apical distances between the central axes and angle deviation. Descriptive statistics and linear regressions were used for the statistical analysis of the data. RESULTS: Regarding implant apex deviation using low-dose CBCT, the following differences were observed: apical deviation of 0.75 ± 0.63 mm and angular deviation of 2.5 ± 2.12 degrees, while the standard-dose CBCT showed the following results: apical deviation of 0.92 ± 0.55 mm and angular deviation of 3.06 ± 2.12 degrees. The regression analyses could not show evidence for a significant difference between the two CBCT protocols, neither with regard to the apical distance nor in view of the angular deviation. CONCLUSION: Low-dose CBCT imaging protocols providing accurate 3D anatomical information with an improved benefit-risk ratio according to the as low as diagnostically acceptable (ALADA) principle could become a promising option as a primary diagnostic modality as well as for radiologic follow-up.

Appearance of nasopalatine duct cysts on dental magnetic resonance imaging using a mandibular coil: Two case reports with a literature review.

Nasopalatine duct cysts (NPDCs), the most common non-odontogenic cysts of maxilla, are often incidental findings on diagnostic imaging. When symptomatic, they usually present as a painless swelling with possible fistula. Conventional radiography shows a round-to-ovoid or heart-shaped radiolucency between the roots of central maxillary incisors. While the radiographic features of NPDCs in X-ray-based modalities have been well described, their magnetic resonance imaging (MRI) features have rarely been reported. Developments in dental MRI in recent years and the introduction of various dental MRI protocols now allow a wide range of applications in dental medicine. MRI is becoming an important tool for the detection and diagnosis of incidental or non-incidental dentomaxillofacial cysts. This report presented and discussed the characteristics of 2 NPDC cases visualized on MRI using both conventional and newly implemented specific dental MRI protocols with a novel 15-channel mandibular coil, demonstrating the use of these protocols for radiation-free maxillofacial diagnoses.

Imaging in Third Molar Surgery: A Clinical Update.

Third molar surgery is one of the most common surgical procedures performed in oral and maxillofacial surgery. Considering the patient's young age and the often-elective nature of the procedure, a comprehensive preoperative evaluation of the surgical site, relying heavily on preoperative imaging, is key to providing accurate diagnostic work-up, evidence-based clinical decision making, and, when appropriate, indication-specific surgical planning. Given the rapid developments of dental imaging in the field, the aim of this article is to provide a comprehensive, up-to-date clinical overview of various imaging techniques related to perioperative imaging in third molar surgery, ranging from panoramic radiography to emerging technologies, such as photon-counting computed tomography and magnetic resonance imaging. Each modality's advantages, limitations, and recent improvements are evaluated, highlighting their role in treatment planning, complication prevention, and postoperative follow-ups. The integration of recent technological advances, including artificial intelligence and machine learning in biomedical imaging, coupled with a thorough preoperative clinical evaluation, marks another step towards personalized dentistry in high-risk third molar surgery. This approach enables minimally invasive surgical approaches while reducing inefficiencies and risks by incorporating additional imaging modality- and patient-specific parameters, potentially facilitating and improving patient management.

A Survey on Attitude, Awareness, and Knowledge of Patients Regarding the Use of Dental Implants at a Swiss University Clinic.

Even though restoring missing teeth and oral tissue with dental implants is perceived by most patients as a positive experience, patients lack access to evidence-based information about different treatment options. In order to provide more accurate information for public dental education in Switzerland and to compare it worldwide, this descriptive cross-sectional survey-based study assessed pre-operative attitudes, awareness, and knowledge of patients. A total of 160 patients with indication for tooth extraction were selected randomly from clinical routine between August 2022 and February 2023. Statistical analysis was performed including the chi-square test based on a significance level of 0.05. The results confirm that most patients (78%) were aware of implants as a treatment option for replacing missing teeth and consider them a prioritized solution (79%). Their primary sources of information are dentists (59%), the Internet (50%), relatives and friends (40%). The majority of patients (84%) wanted the surgical procedure to be performed by a board-certified clinical specialist expecting high functional and aesthetic outcomes. Low levels of knowledge could be observed regarding postoperative care, functionality, and clinical performance of implants. This survey-based study revealed a positive attitude and an acceptable level of awareness and knowledge regarding the use of dental implants.

Buccal bone thickness assessment for immediate anterior dental implant planning: A pilot study comparing cone-beam computed tomography and 3D double-echo steady-state MRI.

PURPOSE: To evaluate image quality and diagnostic accuracy of buccal bone thickness assessment in maxillary and mandibular anterior region using cone-beam computed tomography (CBCT) and 3-dimensional double-echo steady-state (DESS) MRI for preoperative planning of immediate dental implants in healthy individuals. METHODS: One hundred and twenty teeth in 10 volunteers were retrospectively evaluated for image quality and artifacts using Likert scale (4 = excellent to 0 = decreased). Buccal bone thickness was measured at three measurement points (M1 = 2 mm from the cementoenamel junction, M2 = middle of the root, and M3 = at the root apex) for each tooth in the maxillary (13-23) and the mandibular anterior region (33-43). Descriptive statistics and two-way ANOVA with Tukey's Post-hoc test were performed to evaluate the significant differences (α = 0.05) between both imaging modalities. RESULTS: Image quality showed little to no artifacts and enabled confident diagnostic interpretation (CBCT (3.72 ± 0.46); MRI (3.65 ± 0.49)), with no significant differences between both imaging modalities (p > 0.05). Regarding the assessment of buccal bone thickness at M1-M3 for the teeth 13-23 and 33-43, no significant differences were noted (p > 0.05). MRI demonstrated slight, nonsignificant overestimation of thickness with the canines having mainly a thick buccal bone wall, where thin buccal wall was evident for the central incisors. CONCLUSION: Black bone MRI sequences, such as 3D-DESS MRI, for immediate implant planning provided confidential diagnostic accuracy in bone thickness assessment without significant disadvantages compared to CBCT. Thus, the implementation of no-dose protocols for dental rehabilitation using an immediate loading approach seems promising and could further improve the treatment strategy for dental rehabilitation.

MR-orthopantomography in operative dentistry and oral and maxillofacial surgery: a proof of concept study.

This prospective study aimed to present, compare, and evaluate the suitability of five different magnetic resonance imaging (MRI) protocols (3D double-echo steady-state (DESS), 3D fast spin echo short-tau inversion recovery (SPACE-STIR), 3D fast spin echo spectral attenuated inversion recovery (SPACE-SPAIR), volumetric interpolated breath-hold examination (T1-VIBE-Dixon), and ultrashort echo time (UTE)) and for orthopantomogram (OPG)-like MRI reconstructions using a novel mandibular coil. Three readers assessed MR-OPGs of 21 volunteers regarding technical image quality (4, excellent; 0, severely reduced), susceptibility to artifacts (3, absence; 0, massive), and visualization of anatomical structures in the oral cavity and surrounding skeletal structures (4, fine details visible; 0, no structures visible). Average image quality was good (3.29 ± 0.83) for all MRI protocols, with UTE providing the best image quality (3.52 ± 0.62) and no to minor artifacts (2.56 ± 0.6). Full diagnostic interpretability of the osseous structures is best in VIBE-Dixon and UTE MR-OPGs. DESS provided excellent visualization of the finest details of the nervous tissue (3.95 ± 0.22). Intra-reader and inter-reader agreement between the readers was good to excellent for all protocols (ICCs 0.812-0.957). MR-OPGs provide indication-specific accurate imaging of the oral cavity and could contribute to the early detection of pathologies, staging, and radiological follow-up of oral and maxillofacial diseases.