RESUMEN
Dynamic tuning of metamaterials is a critical step toward advanced functionality and improved bandwidth. In the visible spectrum, full spectral color tuning is inhibited by the large absorption that accompanies index changes, particularly at blue wavelengths. Here, we show that the electrochemical lithiation of anatase TiO2 to Li0.5TiO2 (LTO) results in an index change of 0.65 at 649 nm with absorption coefficient less than 0.1 at blue wavelengths, making this material well-suited for dynamic visible color tuning. Dynamic tunability of TiO2 is leveraged in a Fabry-Perot cavity and a gap plasmon metasurface. In the Fabry-Perot configuration, the device exhibits a shift in reflectance of over 100 nm when subjected to only 2 V bias while the gap plasmon metasurface achieves enhanced switching speed. The dynamic range, speed, and cyclability indicate that the TiO2/LTO system is competitive with established actuators like WO3, with the additional advantage of reduced absorption at high frequencies.
RESUMEN
Deep neural networks (DNNs) utilized recently are physically deployed with computational units (e.g., CPUs and GPUs). Such a design might lead to a heavy computational burden, significant latency, and intensive power consumption, which are critical limitations in applications such as the Internet of Things (IoT), edge computing, and the usage of drones. Recent advances in optical computational units (e.g., metamaterial) have shed light on energy-free and light-speed neural networks. However, the digital design of the metamaterial neural network (MNN) is fundamentally limited by its physical limitations, such as precision, noise, and bandwidth during fabrication. Moreover, the unique advantages of MNN's (e.g., light-speed computation) are not fully explored via standard 3×3 convolution kernels. In this paper, we propose a novel large kernel metamaterial neural network (LMNN) that maximizes the digital capacity of the state-of-the-art (SOTA) MNN with model re-parametrization and network compression, while also considering the optical limitation explicitly. The new digital learning scheme can maximize the learning capacity of MNN while modeling the physical restrictions of meta-optic. With the proposed LMNN, the computation cost of the convolutional front-end can be offloaded into fabricated optical hardware. The experimental results on two publicly available datasets demonstrate that the optimized hybrid design improved classification accuracy while reducing computational latency. The development of the proposed LMNN is a promising step towards the ultimate goal of energy-free and light-speed AI.
RESUMEN
Optical Fourier transform-based processing is an attractive technique due to the fast processing times and large-data rates. Furthermore, it has recently been demonstrated that certain Fourier-based processors can be realized in compact form factors using flat optics. The flat optics, however, have been demonstrated as static filters where the operator is fixed, limiting the applicability of the approach. Here, we demonstrate a reconfigurable metasurface that can be dynamically tuned to provide a range of processing modalities including bright-field imaging, low-pass and high-pass filtering, and second-order differentiation. The dynamically tunable metasurface can be directly combined with standard coherent imaging systems and operates with a numerical aperture up to 0.25 and over a 60 nm bandwidth. The ability to dynamically control light in the wave vector domain, while doing so in a compact form factor, may open new doors to applications in microscopy, machine vision, and sensing.
Asunto(s)
Procesamiento de Imagen Asistido por Computador , Óptica y Fotónica , MicroscopíaRESUMEN
Optical limiting is desirable or necessary in a variety of applications that employ high-power light sources or sensitive photodetectors. However, the most prevalent methods compromise between on-state transmission and turndown ratio or rely on narrow transmission windows. We demonstrate that a metasurface-based architecture incorporating phase-change materials enables both high and broadband on-state transmission (-4.8 dB) while also providing a large turndown ratio (25.2 dB). Additionally, this design can be extended for broadband multiwavelength limiting due to the high off-resonance transmittance and readily scalable resonant wavelength. Furthermore, our choice of active material allows for protection in ultrafast laser environments due to the speed of the phase transition. These benefits offer a strong alternative to state-of-the-art optical limiters in technologies ranging from sensor protection to protective eyewear.
RESUMEN
Mastering dynamic free-space spectral control and modulation in the near-infrared (NIR) and optical regimes remains a challenging task that is hindered by the available functional materials at high frequencies. In this work, we have realized an efficient metadevice capable of spectral control by minimizing the thermal mass of a vanadium dioxide phase-change material (PCM) and placing the PCM at the feed gap of a bow-tie field antenna. The device has an experimentally measured tuning range of up to 360 nm in the NIR and a modulation depth of 33% at the resonant wavelength. The metadevice is configured for integrated and local heating, leading to faster switching and more precise spatial control compared with devices based on phase-change thin films. We envisage that the combined advantages of this device will open new opportunities for signal processing, memory, security, and holography at optical frequencies.
RESUMEN
In the emerging field of thermoplasmonics, Joule heating associated with optically resonant plasmonic structures is exploited to generate nanoscale thermal hotspots. In the present study, new methods for designing and thermally probing thermoplasmonic structures are reported. A general design rationale, based on Babinet's principle, is developed for understanding how the complementary version of ideal electromagnetic antennae can yield efficient nanoscale heat sources with maximized current density. Using this methodology, we show that the diabolo antenna is more suitable for heat generation compared with its more well-known complementary structure, the bow-tie antenna. We also demonstrate that highly localized and enhanced thermal hot spots can be realized by incorporating the diabolo antenna into a plasmonic lens. Using a newly developed thermal microscopy method based on the temperature-dependent photoluminescence lifetime of thin-film thermographic phosphors, we experimentally characterize the thermal response of various antenna and superstructure designs. Data from FDTD simulations and the experimental temperature measurements confirm the validity of the design rationale. The thermal microscopy technique, with its robust sensing method, could overcome some of the drawbacks of current micro/nanoscale temperature measurement schemes.
RESUMEN
Rapid developments in machine vision technology have impacted a variety of applications, such as medical devices and autonomous driving systems. These achievements, however, typically necessitate digital neural networks with the downside of heavy computational requirements and consequent high energy consumption. As a result, real-time decision-making is hindered when computational resources are not readily accessible. Here we report a meta-imager designed to work together with a digital back end to offload computationally expensive convolution operations into high-speed, low-power optics. In this architecture, metasurfaces enable both angle and polarization multiplexing to create multiple information channels that perform positively and negatively valued convolution operations in a single shot. We use our meta-imager for object classification, achieving 98.6% accuracy in handwritten digits and 88.8% accuracy in fashion images. Owing to its compactness, high speed and low power consumption, our approach could find a wide range of applications in artificial intelligence and machine vision applications.
RESUMEN
Metasurfaces have recently risen to prominence in optical research, providing unique functionalities that can be used for imaging, beam forming, holography, polarimetry, and many more, while keeping device dimensions small. Despite the fact that a vast range of basic metasurface designs has already been thoroughly studied in the literature, the number of metasurface-related papers is still growing at a rapid pace, as metasurface research is now spreading to adjacent fields, including computational imaging, augmented and virtual reality, automotive, display, biosensing, nonlinear, quantum and topological optics, optical computing, and more. At the same time, the ability of metasurfaces to perform optical functions in much more compact optical systems has triggered strong and constantly growing interest from various industries that greatly benefit from the availability of miniaturized, highly functional, and efficient optical components that can be integrated in optoelectronic systems at low cost. This creates a truly unique opportunity for the field of metasurfaces to make both a scientific and an industrial impact. The goal of this Roadmap is to mark this "golden age" of metasurface research and define future directions to encourage scientists and engineers to drive research and development in the field of metasurfaces toward both scientific excellence and broad industrial adoption.
RESUMEN
An integrated silicon photonics coupler for fiber to waveguide conversion was designed employing a transformation optics approach. Quasi-conformal mapping was used to obtain achievable material properties, which were realized by a distorted hexagonal lattice of air holes in silicon. The coupler, measuring only 10 µm in length and fabricated with a single-step lithography process, exhibits a peak simulated transmission efficiency of nearly 100% for in-plane mode conversion and a factor of 5 improvement over butt coupling for fiber to waveguide mode conversion in experimental testing.
Asunto(s)
Electrónica/instrumentación , Tecnología de Fibra Óptica/instrumentación , Dispositivos Ópticos , Silicio/química , Resonancia por Plasmón de Superficie/instrumentación , Transductores , Diseño de Equipo , Análisis de Falla de EquipoRESUMEN
Optical metasurfaces offer a compact platform for manipulation of the amplitude, phase, and polarization state of light. Independent control over these properties, however, is hindered by the symmetric transmission matrix associated with single-layer metasurfaces. Here, we utilize multilayer birefringent meta-optics to realize high-efficiency, independent control over the amplitude, phase, and polarization state of light. High-efficiency control is enabled by redistributing the wavefront between cascaded metasurfaces, while end-to-end inverse design is used to realize independent complex-valued functions for orthogonal polarization states. Based on this platform, we demonstrate spatial mode division multiplexing, optical mode conversion, and universal vectorial holograms, all with diffraction efficiencies over 80%. This meta-optic platform expands the design space of flat optics and could lead to advances in optical communications, quantum entanglement, and information encryption.
RESUMEN
Precise control of a material's emissivity is critical for thermal-engineering applications. Metamaterials, which derive their optical properties from sub-wavelength structures, have emerged as a promising way to tune emissivity over a wide parameter space. However, metamaterial designs have not yet achieved simultaneous spatial and temporal control of emissivity, which is important for advanced engineering applications such as adaptive thermal management and reconfigurable infrared camouflage. Here, spatiotemporal emissivity control is demonstrated by designing and fabricating a large-area, infrared metamaterial that is modulated with ultraviolet (UV) light. The UV light generates free carriers in a photosensitive ZnO spacer layer, which changes the metamaterial optical properties and causes a localized increase in emissivity. Thermal imaging of the metamaterial during UV illumination reveals an apparent temperature increase as a result of the emissivity change. The imaged temperature fluctuation is recorded under exposure from a temporally modulated and spatially patterned UV illumination source to characterize both the temporal response and spatial resolution of the emissivity change. The results of this work demonstrate new capabilities for thermal metamaterials that could bring about the next generation of thermal-engineering devices.