Electrospun Solid Formulation of Anaerobic Gut Microbiome Bacteria.

A model anaerobic bacterium strain from the gut microbiome (Clostridium butyricum) producing anti-inflammatory molecules was incorporated into polymer-free fibers of a water-soluble cyclodextrin matrix (HP-ß-CD) using a promising scaled-up nanotechnology, high-speed electrospinning. A long-term stability study was also carried out on the bacteria in the fibers. Effect of storage conditions (temperature, presence of oxygen) and growth conditions on the bacterial viability in the fibers was investigated. The viability of the sporulated anaerobic bacteria in the fibers was maintained during 12 months of room temperature storage in the presence of oxygen. Direct compression was used to prepare tablets from the produced bacteria-containing fibers after milling (using an oscillating mill) and mixing with tableting excipients, making easy oral administration of the bacteria possible. No significant decrease was observed in bacterial viability following the processing of the fibers (milling and tableting).

Oral bioavailability enhancement of flubendazole by developing nanofibrous solid dosage forms.

The bioavailability of the anthelminthic flubendazole was remarkably enhanced in comparison with the pure crystalline drug by developing completely amorphous electrospun nanofibres with a matrix consisting of hydroxypropyl-ß-cyclodextrin and polyvinylpyrrolidone. The thus produced formulations can potentially be active against macrofilariae parasites causing tropical diseases, for example, river blindness and elephantiasis, which affect altogether more than a hundred million people worldwide. The bioavailability enhancement was based on the considerably improved dissolution. The release of a dose of 40 mg could be achieved within 15 min. Accordingly, administration of the nanofibrous system ensured an increased plasma concentration profile in rats in contrast to the practically non-absorbable crystalline flubendazole. Furthermore, easy-to-grind fibers could be developed, which enabled compression of easily administrable immediate release tablets.

Oligonucleotide Formulations Prepared by High-Speed Electrospinning: Maximizing Loading and Exploring Downstream Processability.

The aim of this study was to develop antisense oligonucleotide tablet formulations using high-speed electrospinning. Hydroxypropyl-beta-cyclodextrin (HPßCD) was used as a stabilizer and as an electrospinning matrix. In order to optimize the morphology of the fibers, electrospinning of various formulations was carried out using water, methanol/water (1:1), and methanol as solvents. The results showed that using methanol could be advantageous due to the lower viscosity threshold for fiber formation enabling higher potential drug loadings by using less excipient. To increase the productivity of electrospinning, high-speed electrospinning technology was utilized and HPßCD fibers containing 9.1% antisense oligonucleotide were prepared at a rate of ~330 g/h. Furthermore, to increase the drug content of the fibers, a formulation with a 50% drug loading was developed. The fibers had excellent grindability but poor flowability. The ground fibrous powder was mixed with excipients to improve its flowability, which enabled the automatic tableting of the mixture by direct compression. The fibrous HPßCD-antisense oligonucleotide formulations showed no sign of physical or chemical degradation over the 1-year stability study, which also shows the suitability of the HPßCD matrix for the formulation of biopharmaceuticals. The obtained results demonstrate possible solutions for the challenges of electrospinning such as scale-up and downstream processing of the fibers.

Powder filling of electrospun material in vials: A proof-of-concept study.

The present paper reports the powder filling of milled electrospun materials in vials, which contained voriconazole and sulfobutylether-ß-cyclodextrin. High-speed electrospinning was used for the production of the fibrous sample, which was divided into 6 parts. Each portion was milled using different milling methods and sizes of sieves to investigate whether the milling influences the powder and filling properties. Bulk and tapped density tests, laser diffraction and angle of repose measurements were applied to characterize the milled powders, while a vibratory feeder was used for the feeding experiments. The correlation between the material property descriptors and the feeding responses was investigated by multivariate data analysis. Based on the results, three samples were chosen for the vial filling, which was accomplished with 3400 mg electrospun material containing 200 mg voriconazole, representative of the commercial product. The feed rate was set to fit the 240 g/h production rate of the electrospinning and the relative standard deviation of three repeated vial filling was determined to see the accuracy of the process. This research shows that by applying a suitable milling method it is possible to process electrospun fibers to a powder, which can be filled into vials and used as reconstitution dosage forms.

Continuous downstream processing of milled electrospun fibers to tablets monitored by near-infrared and Raman spectroscopy.

Electrospinning is a technology for manufacture of nano- and micro-sized fibers, which can enhance the dissolution properties of poorly water-soluble drugs. Tableting of electrospun fibers have been demonstrated in several studies, however, continuous manufacturing of tablets have not been realized yet. This research presents the first integrated continuous processing of milled drug-loaded electrospun materials to tablet form supplemented by process analytical tools for monitoring the active pharmaceutical ingredient (API) content. Electrospun fibers of an amorphous solid dispersion (ASD) of itraconazole and poly(vinylpyrrolidone-co-vinyl acetate) were produced using high speed electrospinning and afterwards milled. The milled fibers with an average fiber diameter of 1.6 ± 0.9 µm were continuously fed with a vibratory feeder into a twin-screw blender, which was integrated with a tableting machine to prepare tablets with ~ 10 kN compression force. The blend of fibers and excipients leaving the continuous blender was characterized with a bulk density of 0.43 g/cm3 and proved to be suitable for direct tablet compression. The ASD content, and thus the API content was determined in-line before tableting and at-line after tableting using near-infrared and Raman spectroscopy. The prepared tablets fulfilled the USP <905> content uniformity requirement based on the API content of ten randomly selected tablets. This work highlights that combining the advantages of electrospinning (e.g. less solvent, fast and gentle drying, low energy consumption, and amorphous products with high specific surface area) and the continuous technologies opens a new and effective way in the field of manufacturing of the poorly water-soluble APIs.

Monoclonal antibody formulation manufactured by high-speed electrospinning.

Solid formulations of monoclonal antibodies present several advantages, such as improved stability and increased shelf-life as well as simpler storage and transportation. In this study, we present a gentle drying technology for monoclonal antibodies, applying the water soluble 2-hydroxypropyl-ß-cyclodextrin (HP-ß-CD) as matrix, to prepare a solid reconstitution dosage form. High-speed electrospinning of an aqueous infliximab-containing HP-ß-CD solution was carried out at 25 °C resulting in fibers with an average diameter of 2.5 µm. The mAb-loaded electrospun fibers were successful to preserve the stability of infliximab in solid form. The results of size exclusion chromatography and gel electrophoresis indicated no significant increase in aggregate formation during the electrospinning process compared to the initial matrix solution. The binding activity of infliximab was preserved during electrospinning compared to the reference liquid formulation. Due to the enhanced surface area, excellent reconstitution capability, i.e. clear solution within 2 min without any vigorous mixing, could be achieved in a small-scale reconstitution test. The results of this work demonstrate that high-speed electrospinning is a very promising technique to manufacture the solid formulation of monoclonal antibodies for applications such as fast reconstitutable powders.

Continuous drying of a protein-type drug using scaled-up fiber formation with HP-ß-CD matrix resulting in a directly compressible powder for tableting.

The goals of this work were to evaluate if high-speed electrospinning can be used as a gentle and continuous drying technology to produce protein-containing cyclodextrin-based fibers from an aqueous solution and to convert the produced protein-cyclodextrin fibers into a directly compressible powder. A 400 mL/h feeding rate was used during the electrospinning experiments, corresponding to a ~270 g/h production rate of the dried material. The produced fibers were collected in a cyclone. The fibers were found grindable without secondary drying, and the ground powder was mixed with tableting excipients and was successfully tableted by direct compression. The model protein-type drug (ß-galactosidase) remained stable during each of the processing steps (electrospinning, grinding, tableting) and after 6 months of storage at room temperature in the tablets. The obtained results demonstrate that high speed electrospinning can be a gentle alternative to traditional drying methods used for protein-type drugs, and that tablet formulation is achievable from the electrospun material prepared this way.

Scale-up of electrospinning technology: Applications in the pharmaceutical industry.

Recently, electrospinning (ES) of fibers has been shown to be an attractive strategy for drug delivery. One of the main features of ES is that a wide variety of drugs can be loaded into the fibers to improve their bioavailability, to enhance dissolution, or to achieve controlled release. Besides, ES is a continuous technology with low energy consumption, which can make it a very economic production alternative to the widely used freeze drying and spray drying. However, the low production rate of laboratory-scaled ES has limited the industrial application of the technology so far. This article covers the various ES technologies developed for scaled-up fiber production with an emphasis on pharmaceutically relevant examples. The methods used for increasing the productivity are complied, which is followed by a review of specific examples from literature where these technologies are utilized to produce oral drug delivery systems. The different technologies are compared in terms of their basic principles, advantages, and limitations. Finally, the different downstream processing options to prepare tablets or capsules containing the electrospun drug are covered as well. This article is categorized under: Therapeutic Approaches and Drug Discovery > Emerging Technologies.

Scaled-Up Production and Tableting of Grindable Electrospun Fibers Containing a Protein-Type Drug.

The aims of this work were to develop a processable, electrospun formulation of a model biopharmaceutical drug, ß-galactosidase, and to demonstrate that higher production rates of biopharmaceutical-containing fibers can be achieved by using high-speed electrospinning compared to traditional electrospinning techniques. An aqueous solution of 7.6 w/w% polyvinyl alcohol, 0.6 w/w% polyethylene oxide, 9.9 w/w% mannitol, and 5.4 w/w% ß-galactosidase was successfully electrospun with a 30 mL/h feeding rate, which is about 30 times higher than the feeding rate usually attained with single-needle electrospinning. According to X-ray diffraction measurements, polyvinyl alcohol, polyethylene oxide, and ß-galactosidase were in an amorphous state in the fibers, whereas mannitol was crystalline (δ-polymorph). The presence of crystalline mannitol and the low water content enabled appropriate grinding of the fibrous sample without secondary drying. The ground powder was mixed with excipients commonly used during the preparation of pharmaceutical tablets and was successfully compressed into tablets. ß-galactosidase remained stable during each of the processing steps (electrospinning, grinding, and tableting) and after one year of storage at room temperature in the tablets. The obtained results demonstrate that high-speed electrospinning is a viable alternative to traditional biopharmaceutical drying methods, especially for heat sensitive molecules, and tablet formulation is achievable from the electrospun material prepared this way.

Drying technology strategies for colon-targeted oral delivery of biopharmaceuticals.

In chronic intestinal diseases like inflammatory bowel disease, parenteral administration of biopharmaceuticals is associated with numerous disadvantages including immune reactions, infections, low patient compliance, and toxicity caused by high systemic bioavailability. One alternative that can potentially overcome these limitations is oral administration of biopharmaceuticals, where the local delivery will reduce the systemic exposure and furthermore the manufacturing costs will be lower. However, the development of oral dosage forms that deliver the biologically active form to the intestines is one of the greatest challenges for pharmaceutical technologists due to the sensitive nature of biopharmaceuticals. The present article discusses the various drug delivery technologies used to produce orally administered solid dosage forms of biopharmaceuticals with an emphasis on colon-targeted delivery. Solid oral dosage compositions containing different types of colon-targeting biopharmaceuticals are compiled followed by a review of currently applied and emerging drying technologies for biopharmaceuticals. The different drying technologies are compared in terms of their advantages, limitations, costs and their effect on product stability.

Continuous alternative to freeze drying: Manufacturing of cyclodextrin-based reconstitution powder from aqueous solution using scaled-up electrospinning.

The aims of this study were to evaluate electrospinning as a continuous alternative to freeze drying in the production of a reconstitution injection dosage form, and to prove that aqueous electrospinning can be realized with a high production rate at room temperature. High-speed electrospinning with a novel continuous cyclone collection was used to manufacture a formulation of the poorly water-soluble antifungal voriconazole (VOR) with sulfobutylether-ß-cyclodextrin (SBE-ß-CD). The freeze-dried, marketed product of this drug substance, Vfend® also contains SBE-ß-CD as excipient. SBE-ß-CD acted as a 'quasi-polymer', and it could be electrospun despite its low molecular mass (2163 Da). According to X-ray diffraction and differential scanning calorimetry, no traces of crystalline VOR were detectable in the fibers. Furthermore, Raman mapping and energy dispersive spectroscopy measurements showed a uniform distribution of amorphous VOR in the fibers. Reconstitution tests carried out with ground fibrous powder showed complete dissolution resulting in a clear solution after 30 s (similarly to Vfend®). The high productivity rate (~240 g/h) achieved using high-speed electrospinning makes this scaled-up, continuous and flexible manufacturing process capable of fulfilling the technological and capacity requirements of the pharmaceutical industry. This work shows that aqueous high-speed electrospinning, being a continuous and high-throughput process, is an economically viable production alternative to freeze drying.

Comparative interaction of 2-hydroxypropyl-beta-cyclodextrin and sulfobutylether-beta-cyclodextrin with itraconazole: phase-solubility behavior and stabilization of supersaturated drug solutions.

Cyclodextrins can increase the apparent solubility and dissolution rate of poorly water-soluble drug candidates improving their biopharmaceutical performance. The current data assess the ability of hydrophilic cyclodextrins to solubilize compounds via stabilization of supersaturated drug solutions presumably by inhibition of nucleation and arresting crystal growth. To these points, the effects of 2-hydroxypropyl-beta-cyclodextrin (HPbetaCD) and sulfobutylether-beta-cyclodextrin (SBEbetaCD) on equilibrium solubility was assessed via phase-solubility analysis as were the interactions of these excipients on drug solubility under conditions favoring supersaturation. Phase-solubility analysis indicated that different profiles were generated as a function of the cyclodextrin examined and the pH of the complexing medium. When kinetic solubility measurements were completed, the cyclodextrins were found to stabilize concentrations of itraconazole significantly in excess of their equilibrium solubility when supersaturated solutions were formed using the co-solvent/solvent quench approach. These solutions were stable over 240 min falling in concentration at the 24 h time point of the experiment unlike those formed using surfactants and other polymers which demonstrated a rapid decrease in concentration over time. These data suggest that hydrophilic cyclodextrins might be useful formulation adjuncts in supersaturating drug delivery systems.

Use of a screening method to determine excipients which optimize the extent and stability of supersaturated drug solutions and application of this system to solid formulation design.

Assessing the effect of excipients on the ability to attain and maintain supersaturation of drug-based solution may provide useful information for the design of solid formulations. Judicious selection of materials that affect either the extent or stability of supersaturating drug delivery systems may be enabling for poorly soluble drug candidates or other difficult-to-formulate compounds. The technique suggested herein is aimed at providing a screening protocol to allow preliminary assessment of these factors based on small to moderate amounts of drug substance. A series of excipients were selected that may, by various mechanisms, affect supersaturation including pharmaceutical polymers such as HMPC and PVP, surfactants such as Polysorbate 20, Cremophor RH40 and TPGS and hydrophilic cyclodextrins such as HPbetaCD. Using a co-solvent based method and 25 drug candidates, the data suggested, on the whole, that the surfactants and the selected cyclodextrin seemed to best augment the extent of supersaturation but had variable benefits as stabilizers, while the pharmaceutical polymers had useful effect on supersaturation stability but were less helpful in increasing the extent of supersaturation. Using these data, a group of simple solid dosage forms were prepared and tested in the dog for one of the drug candidates. Excipients that gave the best extent and stability for the formed supersaturated solution in the screening assay also gave the highest oral bioavailability in the dog.

Hot stage extrusion of p-amino salicylic acid with EC using CO2 as a temporary plasticizer.

The aim of the current research project was to explore the possibilities of combining pressurized carbon dioxide with hot stage extrusion during manufacturing of solid dispersions of the thermally labile p-aminosalicylic acid (p-ASA) and ethylcellulose 20cps (EC 20cps) and to evaluate the ability of the pressurized gas to act as a temporary plasticizer. The thermal stability of the p-ASA was investigated using DSC, TGA and HPLC. The compound decomposes completely upon melting. Below 110 degrees C and under atmospheric conditions, the compound is thermally stabile for 10min. Pressurized carbon dioxide was injected into a Leistritz Micro 18 intermeshing co-rotating twin-screw melt extruder using an ISCO 260D syringe pump. Carbon dioxide acted as plasticizer for p-ASA/EC 20cps, reducing the processing temperature during the hot stage extrusion process. HPLC showed that without carbon dioxide injection, approximately 17% of p-ASA degraded, while less than 5% degraded with CO(2) injection. The experiments clearly showed that injecting pressurized carbon dioxide broadens the application of hot stage extrusion to thermally labile compounds in a one step process.

AC and DC electrospinning of hydroxypropylmethylcellulose with polyethylene oxides as secondary polymer for improved drug dissolution.

Alternating current electrospinning (ACES) capable to reach multiple times higher specific productivities than widely used direct current electrospinning (DCES) was investigated and compared with DCES to prepare drug-loaded formulations based on one of the most widespread polymeric matrix used for commercialized pharmaceutical solid dispersions, hydroxypropylmethylcellulose 2910 (HPMC). In order to improve the insufficient spinnability of HPMC (both with ACES and DCES) polyethylene oxide (PEO) as secondary polymer with intense ACES activity was introduced into the electrospinning solution. Different grades of this polymer used at as low concentrations in the fibers as 0.1% or less enabled the production of high quality HPMC-based fibrous mats without altering its physicochemical properties remarkably. Increasing concentrations of higher molecular weight PEOs led to the thickening of fibers from submicronic diameters to several microns of thickness. ACES fibers loaded with the poorly water-soluble model drug spironolactone were several times thinner than drug-loaded fibers prepared with DCES in spite of the higher feeding rates applied. The amorphous HPMC-based fibers with large surface area enhanced the dissolution of spironolactone significantly, the presence of small amounts of PEO did not affect the dissolution rate. The presented results confirm the diverse applicability of ACES, a novel technique to prepare fibrous drug delivery systems.

Lubricant-Induced Crystallization of Itraconazole From Tablets Made of Electrospun Amorphous Solid Dispersion.

Investigation of downstream processing of nanofibrous amorphous solid dispersions to generate tablet formulation is in a quite early phase. Development of high speed electrospinning opened up the possibility to study tableting of electrospun solid dispersions (containing polyvinylpyrrolidone-vinyl acetate and itraconazole [ITR] in this case). This work was conducted to investigate the influence of excipients on dissolution properties and the feasibility of scaled-up rotary press tableting. The dissolution rates from tablets proved to be mainly composition dependent. Magnesium stearate acted as a nucleation promoting agent (providing an active hydrophobic environment for crystallization of ITR) hindering the total dissolution of ITR. This crystallization process proved to be temperature dependent as well. However, the extent of dissolution of more than 95% was realizable when a less hydrophobic lubricant, sodium stearyl fumarate (soluble in the medium), was applied. Magnesium stearate induced crystallization even if it was put in the dissolution medium next to proper tablets. After optimization of the composition, scaled-up tableting on a rotary press was carried out. Appropriate dissolution of ITR from tablets was maintained for 3 months at 25°C/60% relative humidity. HPLC measurements confirmed that ITR was chemically stable both in the course of downstream processing and storage.

Evaluation of Three Amorphous Drug Delivery Technologies to Improve the Oral Absorption of Flubendazole.

This study investigates 3 amorphous technologies to improve the dissolution rate and oral bioavailability of flubendazole (FLU). The selected approaches are (1) a standard spray-dried dispersion with hydroxypropylmethylcellulose (HPMC) E5 or polyvinylpyrrolidone-vinyl acetate 64, both with Vitamin E d-α-tocopheryl polyethylene glycol succinate; (2) a modified process spray-dried dispersion (MPSDD) with either HPMC E3 or hydroxypropylmethylcellulose acetate succinate (HPMCAS-M); and (3) confining FLU in ordered mesoporous silica (OMS). The physicochemical stability and in vitro release of optimized formulations were evaluated following 2 weeks of open conditions at 25°C/60% relative humidity (RH) and 40°C/75% RH. All formulations remained amorphous at 25°C/60% RH. Only the MPSDD formulation containing HPMCAS-M and 3/7 (wt./wt.) FLU/OMS did not crystallize following 40°C/75% RH exposure. The OMS and MPSDD formulations contained the lowest and highest amount of hydrolyzed degradant, respectively. All formulations were dosed to rats at 20 mg/kg in suspension. One FLU/OMS formulation was also dosed as a capsule blend. Plasma concentration profiles were determined following a single dose. In vivo findings show that the OMS capsule and suspension resulted in the overall highest area under the curve and Cmax values, respectively. These results cross-evaluate various amorphous formulations and provide a link to enhanced biopharmaceutical performance.

Preparation and physicochemical characterization of biodegradable nerve guides containing the nerve growth agent sabeluzole.

The objective of this study was to develop and characterize a biodegradable drug-loaded nerve guide for peripheral nerve regeneration. Sabeluzole, a nerve growth agent, was selected as model compound. Four biodegradable polymers were selected for this study: a copolymer of polylactic acid and polycaprolactone (PCL); a copolymer of polyglycolic acid and polycaprolactone PCL; a copolymer of PCL/polydioxanone (PDO) and PDO. Placebo and drug loaded nerve guides were obtained by melt compression and melt extrusion. It was observed that melt compression and melt extrusion are feasible techniques to prepare the nerve guides. Based on the physicochemical characterization, all samples show absence of crystalline sabeluzole, indicating the formation of an amorphous dispersion. The in vitro release measurements show that the release of sabeluzole is complete, reproducible and can be controlled by the proper selection of the polymer. The release mechanism for all samples follows Fickian release behaviour.

Study of the physicochemical properties and stability of solid dispersions of loperamide and PEG6000 prepared by spray drying.

Solid dispersions of PEG6000 and loperamide-a poorly water-soluble agent-were prepared by spray drying. Their physicochemical properties were evaluated immediately after preparation. The dissolution was higher than that of pure crystalline loperamide. DSC- and XRD-measurements revealed that in the dispersions, loperamide is partially present in the crystalline state. A eutectic state diagram was obtained. The samples containing 20% loperamide were stored under different conditions (40 degrees C and 0% RH, 25 degrees C and 52% RH, 4 degrees C and 0% RH) to investigate their stability as a function of time. The dissolution properties deteriorate upon storage at high temperature (40 degrees C and 0% RH) and in conditions of higher relative humidity (25 degrees C and 52% RH). The DSC-curves clearly indicate an increase in the amount of crystalline compound under these conditions. From these observations it could be concluded that loperamide, which is partially crystalline and partially amorphous in the freshly prepared samples, continues to crystallize under these conditions, resulting in progressively poorer dissolution properties.

Salt formation in solid dispersions consisting of polyacrylic acid as a carrier and three basic model compounds resulting in very high glass transition temperatures and constant dissolution properties upon storage.

The purpose of the study was to investigate the suitability of polyacrylic acid (PAA) as a carrier in solid dispersions, with the aim to delay crystallization of basic drugs and improve their dissolution behaviour. The physicochemical properties were investigated in order to link the physical state of some model compounds to their dissolution properties. Loperamide and two structurally related substances were selected as model compounds. Solid dispersions were prepared by spray drying. The amount of residual solvents and water was determined with gas chromatography (GCS: S: solvent) and thermogravimetric analysis (TGA). The drug loading of the dispersions was determined using high performance liquid chromatography (HPLC). ADSC (alternating or temperature modulated DSC), XRD and FT-IR-spectroscopy were used to evaluate the physical state and in vitro dissolution tests were performed to measure the dissolution properties. IR-measurements demonstrated the formation of a salt between the COOH-groups of the polymer and the amino-groups of the compounds. This phenomenon results in high T(g)-values of the dispersions, suppression of crystallization of the fragment molecules during preparation and an increase of the dissolution rate. Furthermore, the stability study conducted on the dispersions with loperamide showed that both, the amorphous state of the drug and the dissolution behaviour are stable under the applied storage conditions. Hence, from the experimental results it could be concluded that PAA is a suitable carrier in the formulation of stable solid dispersions for the basic compounds that were investigated.