Bacteria Detection at a Single-Cell Level through a Cyanotype-Based Photochemical Reaction.

The detection of living organisms at very low concentrations is necessary for the early diagnosis of bacterial infections, but it is still challenging as there is a need for signal amplification. Cell culture, nucleic acid amplification, or nanostructure-based signal enhancement are the most common amplification methods, relying on long, tedious, complex, or expensive procedures. Here, we present a cyanotype-based photochemical amplification reaction enabling the detection of low bacterial concentrations up to a single-cell level. Photocatalysis is induced with visible light and requires bacterial metabolism of iron-based compounds to produce Prussian Blue. Bacterial activity is thus detected through the formation of an observable blue precipitate within 3 h of the reaction, which corresponds to the concentration of living organisms. The short time-to-result and simplicity of the reaction are expected to strongly impact the clinical diagnosis of infectious diseases.

Self-oriented Ag-based polycrystalline cubic nanostructures through polymer stabilization.

This paper presents the study of the dynamics of the formation of polymer-assisted highly-orientated polycrystalline cubic structures (CS) by a fractal-mediated mechanism. This mechanism involves the formation of seed Ag@Co nanoparticles by InterMatrix Synthesis and subsequent overgrowth after incubation at a low temperature in chloride and phosphate solutions. These ions promote the dissolution and recrystallization in an ordered configuration of pre-synthetized nanoparticles initially embedded in negatively-charged polymeric matrices. During recrystallization, silver ions aggregate in AgCl@Co fractal-like structures, then evolve into regular polycrystalline solid nanostructures (e.g. CS) in a single crystallization step on specific regions of the ion exchange resin (IER) which maintain the integrity of polycrystalline nanocubes. Here, we study the essential role of the IER in the formation of these CS for the maintenance of their integrity and stability. Thus, this synthesis protocol may be easily expanded to the composition of other nanoparticles providing an interesting, cheap and simple alternative for cubic structure formation and isolation.

Unmasking the physiology of mercury detoxifying bacteria from polluted sediments.

Marine sediments polluted from anthropogenic activities can be major reservoirs of toxic mercury species. Some microorganisms in these environments have the capacity to detoxify these pollutants, by using the mer operon. In this study, we characterized microbial cultures isolated from polluted marine sediments growing under diverse environmental conditions of salinity, oxygen availability and mercury tolerance. Specific growth rates and percentage of mercury removal were measured in batch cultures for a selection of isolates. A culture affiliated with Pseudomonas putida (MERCC_1942), which contained a mer operon as well as other genes related to metal resistances, was selected as the best candidate for mercury elimination. In order to optimize mercury detoxification conditions for strain MERCC_1942 in continuous culture, three different dilution rates were tested in bioreactors until the cultures achieved steady state, and they were subsequently exposed to a mercury spike; after 24 h, strain MERCC_1942 removed up to 76% of the total mercury. Moreover, when adapted to high growth rates in bioreactors, this strain exhibited the highest specific mercury detoxification rates. Finally, an immobilization protocol using the sol-gel technology was optimized. These results highlight that some sediment bacteria show capacity to detoxify mercury and could be used for bioremediation applications.

Characterization of fibrous polymer silver/cobalt nanocomposite with enhanced bactericide activity.

This manuscript describes the synthesis (based on the intermatrix synthesis (IMS) method), optimization, and application to bacterial disinfection of Ag@Co polymer-metal nanocomposite materials with magnetic and bactericidal properties. This material showed ideal bactericide features for being applied to bacterial disinfection of water, particularly (1) an enhanced bactericidal activity (when compared with other nanocomposites only containing Ag or Co nanoparticles), with a cell viability close to 0% for bacterial suspensions with an initial concentration below 10(5) colony forming units per milliliter (CFU/mL) after a single pass through the material, (2) capacity of killing a wide range of bacterial types (from coliforms to gram-positive bacteria), and (3) a long performance-time, with an efficiency of 100% (0% viability) up to 1 h of operation and higher than 90% during the first 24 h of continuous operation. The nanocomposite also showed a good performance when applied to water samples from natural sources with more complex matrices with efficiencies always higher than 80%.

Sonochemical coating of Prussian Blue for the production of smart bacterial-sensing hospital textiles.

In healthcare facilities, environmental microbes are responsible for numerous infections leading to patient's health complications and even death. The detection of the pathogens present on contaminated surfaces is crucial, although not always possible with current microbial detection technologies requiring sample collection and transfer to the laboratory. Based on a simple sonochemical coating process, smart hospital fabrics with the capacity to detect live bacteria by a simple change of colour are presented here. Prussian Blue nanoparticles (PB-NPs) are sonochemically coated on polyester-cotton textiles in a single-step requiring 15 min. The presence of PB-NPs confers the textile with an intensive blue colour and with bacterial-sensing capacity. Live bacteria in the textile metabolize PB-NPs and reduce them to colourless Prussian White (PW), enabling in situ detection of bacterial presence in less than 6 h with the bare eye (complete colour change requires 40 h). The smart textile is sensitive to both Gram-positive and Gram-negative bacteria, responsible for most nosocomial infections. The redox reaction is completely reversible and the textile recovers its initial blue colour by re-oxidation with environmental oxygen, enabling its re-use. Due to its simplicity and versatility, the current technology can be employed in different types of materials for control and prevention of microbial infections in hospitals, industries, schools and at home.

Sensing bacteria but treating them well: determination of optimal incubation and storage conditions.

Bacteria detection in real samples often involves long and tedious methodologies such as culture enrichment, biochemical screening, and serological confirmation. In this context, the development of biosensors and quick assays for bacteria detection appears as fast growing fields. However, a detailed study of reports in these areas reveals the existence of important differences in bacteria storage, handling, and detection conditions, indicating that authors do not take advantage of the well-established procedures existing for classical techniques such as enzyme-linked immunosorbent assay (ELISA). In the current work, we exploit standard ELISA methodology to identify and study diverse parameters that can be critical along the different steps of bacteria detection and sensing. Among others, we studied in detail the effect of the bacterial strain used and the presence of detergent and glycerol in assay performance, as well as the effects of heat inactivation or storing conditions, on bacteria integrity and thus detectability. Finally, we describe the use of "ready-to-use" frozen bacterial pellets as an excellent alternative to the use of daily prepared fresh cultures during assay optimization and preparation of calibration standards. The results presented are also supported by an extensive bibliography search, giving shape to an important compilation of information that will be useful to authors working in a variety of methodologies and sensing formats.

Bioelectrochromic hydrogel for fast antibiotic-susceptibility testing.

Materials science offers new perspectives in the clinical analysis of antimicrobial sensitivity. However, a biomaterial with the capacity to respond to living bacteria has not been developed to date. We present an electrochromic iron(III)-complexed alginate hydrogel sensitive to bacterial metabolism, here applied to fast antibiotic-susceptibility determination. Bacteria under evaluation are entrapped -and pre-concentrated- in the hydrogel matrix by oxidation of iron (II) ions to iron (III) and in situ formation of the alginate hydrogel in less than 2min and in soft experimental conditions (i.e. room temperature, pH 7, aqueous solution). After incubation with the antibiotic (10min), ferricyanide is added to the biomaterial. Bacteria resistant to the antibiotic dose remain alive and reduce ferricyanide to ferrocyanide, which reacts with the iron (III) ions in the hydrogel to produce Prussian Blue molecules. For a bacterial concentration above 107 colony forming units per mL colour development is detectable with the bare eye in less than 20min. The simplicity, sensitivity, low-cost and short response time of the biomaterial and the assay envisages a high impact of these approaches on sensitive sectors such as public health system, food and beverage industries or environmental monitoring.

Assessment of soil and groundwater impacts by treated urban wastewater reuse. A case study: application in a golf course (Girona, Spain).

Starting in July 2000, treated wastewater of urban origin has been used for the "Serres de Pals" golf course irrigation (Girona, Spain). To evaluate if the soil and the aquifer underneath are affected by the utilization of this type of water, samples have been taken along a period of several months from the wastewater treatment plant, the stabilization lagoon, groundwater and soil profiles. Analyses have been performed for total coliforms and aerobic bacteria, soil water pressure and soil water content as well as chemical analyses of the irrigation water, aquifer and water of the vadose zone. Soil profiles taken at several times during the study indicate the absence of coliforms except for a short period during summer. In the vadose zone an increase of more than 1000 mg kg(-1) of NaO(2) in the top 60 cm of soil was observed while Cl(-) concentration in the aquifer reached up to 1200 mg l(-1) ten months after starting the irrigation.

Microbial trench-based optofluidic system for reagentless determination of phenolic compounds.

Phenolic compounds are one of the main contaminants of soil and water due to their toxicity and persistence in the natural environment. Their presence is commonly determined with bulky and expensive instrumentation (e.g. chromatography systems), requiring sample collection and transport to the laboratory. Sample transport delays data acquisition, postponing potential actions to prevent environmental catastrophes. This article presents a portable, miniaturized, robust and low-cost microbial trench-based optofluidic system for reagentless determination of phenols in water. The optofluidic system is composed of a poly(methyl methacrylate) structure, incorporating polymeric optical elements and miniaturized discrete auxiliary components for optical transduction. An electronic circuit, adapted from a lock-in amplifier, is used for system control and interfering ambient light subtraction. In the trench, genetically modified bacteria are stably entrapped in an alginate hydrogel for quantitative determination of model phenol catechol. Alginate is also acting as a diffusion barrier for compounds present in the sample. Additionally, the superior refractive index of the gel (compared to water) confines the light in the lower level of the chip. Hence, the optical readout of the device is only altered by changes in the trench. Catechol molecules (colorless) in the sample diffuse through the alginate matrix and reach bacteria, which degrade them to a colored compound. The absorbance increase at 450 nm reports the presence of catechol simply, quickly (~10 min) and quantitatively without addition of chemical reagents. This miniaturized, portable and robust optofluidic system opens the possibility for quick and reliable determination of environmental contamination in situ, thus mitigating the effects of accidental spills.

Monolithically integrated biophotonic lab-on-a-chip for cell culture and simultaneous pH monitoring.

A poly(dimethylsiloxane) biophotonic lab-on-a-chip (bioPhLoC) containing two chambers, an incubation chamber and a monitoring chamber for cell retention/proliferation and pH monitoring, respectively, is presented. The bioPhLoC monolithically integrates a filter with 3 µm high size-exclusion microchannels, capable of efficiently trapping cells in the incubation chamber, as well as optical elements for real-time interrogation of both chambers. The integrated optical elements made possible both absorption and dispersion measurements, which were comparable to those made in a commercially available cuvette. The size-exclusion filter also showed good and stable trapping capacity when using yeast cells of variable size (between 5 and 8 µm diameter). For cell culture applications, vascular smooth muscle cells (VSMC), with sizes between 8 and 10 µm diameter, were used as a mammalian cell model. These cells were efficiently trapped in the incubation chamber, where they proliferated with a classical spindle-shaped morphology and a traditional hill-and-valley phenotype. During cell proliferation, pH changes in the culture medium due to cell metabolism were monitored in real time and with high precision in the monitoring chamber without interference of the measurement by cells and other (cell) debris.

Environmentally-safe bimetallic Ag@Co magnetic nanocomposites with antimicrobial activity.

In this communication we describe the synthesis, characterization and evaluation of the bactericide activity of a superparamagnetic bimetallic Ag/Co polymeric nanocomposite material for the treatment of bacteria contaminated aqueous solutions.

Presence of opportunistic oil-degrading microorganisms operating at the initial steps of oil extraction and handling.

Hydrocarbon-degrading microorganisms from natural environments have been isolated and identified using culture-dependent or molecular techniques. However, there has been little research into the occurrence of microorganisms incorporated into crude oil in the initial steps of extraction and handling, which can reduce the quality of stored petroleum. In the present study, a packed-column reactor filled with autoclaved perlite soaked with crude oil was subjected to a continuous flow of sterile medium in order to determine the presence of potential hydrocarbon degraders. Microorganisms developed on the surface of the perlite within a period of 73 days. DNA was extracted from the biofilm and then PCR-amplified using 16S rRNA bacterial and archaeal primers and 18S rRNA eukaryotic primers. No amplification was obtained using archaeal primers. However, denaturing gradient gel electrophoresis (DGGE) revealed the presence of unique bands indicating bacterial and eukaryotic amplification. Excision of these bands, sequencing, and subsequent BLAST search showed that they corresponded to Bacillus sp. and Aspergillus versicolor. The fungus was later isolated from intact perlite in agar plates. A bacterial clone library was used to confirm the presence in the biofilm of a unique hydrocarbon-degrading bacterium closely related to Bacillus sp. Analysis of the petroleum components by gas chromatography showed that there n-alkanes, aromatic hydrocarbons, and carbazoles were degraded.