RESUMEN
BACKGROUND: Pelvic tilt (PT) is a routinely evaluated parameter in hip and spine surgeries, and is usually measured on a sagittal pelvic radiograph. This may not always be feasible due to limitations such as landmark visibility, pelvic anomaly, and hardware presence. Tremendous efforts have been dedicated to using pelvic antero-posterior (AP) radiographs for assessing sagittal PT. Thus, this systematic review aimed to collect these methods and evaluate their performances. METHODS: Two independent reviewers searched the PubMed, Ovid, Cochrane, and Web of Science databases in June 2023 with backward reference trailing (Google Scholar archive). There were 30 studies recruited. Risk of bias was assessed using the prediction model risk of bias assessment tool. The relevant data were tabulated in a standardized form for evaluating either the absolute PT or relative PT. Disagreement was resolved by discussing with the senior author. RESULTS: There were 19 parameters from pelvic AP projection images involved, with 4 studies which used artificial intelligence, eyeball, or statistical shape method not involving a specific parameter. In comparing the PT values from pelvic sagittal images with those extrapolated from antero-posterior projection images, the highest correlation coefficient was found to be 0.91. The mean absolute difference (error) was 2.6°, with a maximum error reaching 10.9°. Most studies supported the feasibility of using AP parameters to calculate changes in PT. CONCLUSIONS: No individual AP parameter was found to precisely estimate absolute PT. However, relative PT can be derived by evaluating serial AP radiographs of a patient in varying postures, employing any AP parameters.
Asunto(s)
Inteligencia Artificial , Pelvis , Humanos , Pelvis/diagnóstico por imagen , Radiografía , Postura , Bases de Datos Factuales , Estudios RetrospectivosRESUMEN
BACKGROUND: Hip resurfacing arthroplasty (HRA) is a bone-conserving alternative to total hip arthroplasty. We present the 2-year clinical and radiographic follow-up of a novel ceramic-on-ceramic HRA in an international multicenter cohort. METHODS: Patients undergoing HRA between September 2018 and January 2021 were prospectively included. Patient-reported outcome measures (PROMs) in the form of the Forgotten Joint Score, Hip Disability and Osteoarthritis Outcome Score Jr., Western Ontario and McMaster Universities Arthritis Index, Oxford Hip Score, and University of California, Los Angeles, Activity Score were collected preoperatively, and at 1 and 2 years postoperation. Serial radiographs were assessed for migration, component alignment, evidence of osteolysis or loosening, and heterotopic ossification formation. RESULTS: The study identified 200 patients who reached a minimum 2-year follow-up (mean 3.5 years). Of these, 185 completed PROMs follow-up at 2 years. There was a significant improvement in Hip Disability and Osteoarthritis Outcome Score (P < .001) and Oxford Hip Score (P < .001) between the preoperative, 1-year, and 2-year outcomes. Patients had improved activity scores on the University of California, Los Angeles, Active Score (P < .001), with 45% reporting a return to high-impact activity at 2 years. At 1 and 2 years, the Forgotten Joint Score was not significantly different (P = .38). There was no migration, osteolysis, or loosening of any of the implants. No fractures were reported over the 2-year follow-up, with only 1 patient reporting a sciatic nerve palsy. There were 2 revisions, 1 for unexplained pain at 3 months due to acetabular component malposition and 1 at 33.5 months for acetabular implant failure. CONCLUSIONS: The ceramic-on-ceramic resurfacing at 2 years postoperation demonstrates promising results with satisfactory outcomes in all recorded PROMs. Further long-term data are needed to support the widespread adoption of this prosthesis as an alternative to other HRA bearings.
RESUMEN
BACKGROUND: The accurate measurement of pelvic tilt is critical in hip and spine surgery. A sagittal pelvic radiograph is most often used to measure pelvic tilt, but this radiograph is not always routinely obtained and does not always allow the measurement of pelvic tilt because of problems with image quality or patient characteristics (such as high BMI or the presence of a spinal deformity). Although a number of recent studies have explored the correlation between pelvic tilt and the sacro-femoral-pubic angle using AP radiographs (SFP method), which aimed to estimate pelvic tilt without a sagittal radiograph, disagreement remains about whether the SFP method is sufficiently valid and reproducible for clinical use. QUESTIONS/PURPOSES: The purpose of this meta-analysis was to evaluate the correlation between SFP and pelvic tilt in the following groups: (1) overall cohort, (2) male and female cohort, and (3) skeletally mature and immature cohorts (young and adult groups, defined as patients older or younger than 20 years). Additionally, we assessed (4) the errors of SFP-estimated pelvic tilt angles and determined (5) measurement reproducibility using the intraclass correlation coefficient. METHODS: This meta-analysis was reported in accordance with the Preferred Reporting Items for Systematic Reviews and Meta-Analyses guidelines and registered in PROSPERO (record ID: CRD42022315673). PubMed, Embase, Cochrane, and Web of Science were screened in July 2022. The following keywords were used: sacral femoral pubic, sacro femoral pubic, or SFP. The exclusion criteria were nonresearch articles such as commentaries or letters and studies that only investigated relative pelvic tilt rather than absolute pelvic tilt. Although the included studies had different patient recruitment strategies, study quality-wise, they all used an adequate amount of radiographs for landmark annotation and applied a correlation analysis for the relationship between the SFP angle and pelvic tilt. Thus, no risk of bias was found. Participant differences were mitigated via subgroup and sensitivity analyses to remove outliers. Publication bias was assessed using the p value of a two-tailed Egger regression test for the asymmetry of funnel plots, as well as the Duval and Tweedie trim and fill method for potential missing publications to impute true correlations. The extracted correlation coefficients r were pooled using the Fisher Z transformation with a significance level of 0.05. Nine studies were included in the meta-analysis, totaling 1247 patients. Four studies were used in the sex-controlled subgroup analysis (312 male and 460 female patients), and all nine studies were included in the age-controlled subgroup analysis (627 adults and 620 young patients). Moreover, a sex-controlled subgroup analysis was conducted in two studies with only young cohorts (190 young male patients and 220 young female patients). RESULTS: The overall pooled correlation coefficient between SFP and pelvic tilt was 0.61, with high interstudy heterogeneity (I 2 = 76%); a correlation coefficient of 0.61 is too low for most clinical applications. The subgroup analysis showed that the female group had a higher correlation coefficient than the male group did (0.72 versus 0.65; p = 0.03), and the adult group had a higher correlation coefficient than the young group (0.70 versus 0.56; p < 0.01). Three studies reported erroneous information about the measured pelvic tilt and calculated pelvic tilt from the SFP angle. The mean absolute error was 4.6° ± 4.5°; in one study, 78% of patients (39 of 50) were within 5° of error, and in another study, the median absolute error was 5.8º, with the highest error at 28.8° (50 female Asian patients). The intrarater intraclass correlation coefficients ranged between 0.87 and 0.97 for the SFP angle and between 0.89 and 0.92 for the pelvic tilt angle, and the interrater intraclass correlation coefficients ranged between 0.84 and 1.00 for the SFP angle and 0.76 and 0.98 for the pelvic tilt angle. However, large confidence intervals were identified, suggesting considerable uncertainty in measurement at the individual radiograph level. CONCLUSION: This meta-analysis of the best-available evidence on this topic found the SFP method to be unreliable to extrapolate sagittal pelvic tilt in any patient group, and it was especially unreliable in the young male group (defined as patients younger than age 20 years). Correlation coefficients generally were too low for clinical use, but we remind readers that even a high correlation coefficient does not alone justify clinical application of a metric such as this, unless further subgroup analyses find low error and low heterogeneity, which was not the case here. Further ethnicity-segregated subgroup analyses with age, sex, and diagnosis controls could be useful in the future to determine whether there are some subgroups in which the SFP method is useful. LEVEL OF EVIDENCE: Level III, diagnostic study.
Asunto(s)
Fémur , Hueso Púbico , Adulto , Humanos , Masculino , Femenino , Adulto Joven , Reproducibilidad de los Resultados , Estudios Retrospectivos , Fémur/diagnóstico por imagen , Pelvis/diagnóstico por imagenRESUMEN
PURPOSE: The purposes of this study are to, firstly, develop techniques to accurately identify extensor mechanism malalignment by measuring the alignment of the quadriceps tendon (QTA) with computerized tomography (CT) scans. Secondly, to investigate correlations between QTA and lower limb bony anatomical variations within a representative normal population. Lastly, to evaluate the clinical significance of QTA by establishing its potential connection with lateral facet patellofemoral joint osteoarthritis (LFPFJOA). METHOD: CT scans were orientated to a mechanical axis reference frame and three techniques developed to measure the alignment of the quadriceps tendon. Multiple measurement of bony alignment from the hip to the ankle were performed on each scan. A series of 110 cadaveric CT scans were measured to determine normal values, reproducibility, and correlations with bony anatomy. Secondly, a comparison between 2 groups of 25 patients, 1 group with LFPFJOA and 1 group with isolated medial OA and no LFPFJOA. RESULTS: From the cadaveric study, it was determined that the alignment of the quadriceps tendon is on average 4.3° (SD 3.9) varus and the apex of the tendon is 9.1 mm (SD 7.7 mm) lateral to the trochlear groove and externally rotated 1.9° (SD 12.4°) from the centre of the femoral shaft. There was no association between the quadriceps tendon alignment and any other bony measurements including tibial tubercle trochlear groove distance (TTTG), coronal alignment, trochlear groove alignment and femoral neck anteversion. A lateralized QTA was significantly associated with LFPFJOA. QTA in the LFPFJOA group was 9.6° varus (SD 2.8°), 21.3 mm (SD 6.6) lateralised and 17.3° ER (SD 11°) compared to 5.5° (SD 2.3°), 10.7 mm (SD 4.9) and 3.3° (SD 7.2°), respectively, in the control group (p < 0.001). A significant association with LFPFJOA was also found for TTTG (17.2 mm (SD 5.7) vs 12.1 mm (SD 4.3), p < 0.01). Logistic regression analysis confirmed the QTA as having the stronger association with LFPFJOA than TTTG (AUC 0.87 to 0.92 for QTA vs 0.79 for TTTG). CONCLUSION: These studies have confirmed the ability to accurately determine QTA on CT scans. The normal values indicate that the QTA is highly variable and unrelated to bony anatomy. The comparative study has determined that QTA is clinically relevant and a lateralised QTA is the dominant predictor of severe LFPFJOA. This deformity should be considered when assessing patella maltracking associated with patella osteoarthritis, patella instability and arthroplasty. LEVEL OF EVIDENCE: III (retrospective cohort study).
Asunto(s)
Osteoartritis , Articulación Patelofemoral , Humanos , Articulación Patelofemoral/diagnóstico por imagen , Articulación Patelofemoral/cirugía , Estudios Retrospectivos , Reproducibilidad de los Resultados , Tibia/cirugía , Rótula , Tendones , Cadáver , Articulación de la Rodilla/cirugíaRESUMEN
OBJECTIVE: There is no information about surfing after hip resurfacing arthroplasty (HRA). We did a retrospective study aiming to evaluate the safety and feasibility to resume surfing-an extreme sport with high-impact physical activity-after HRA. DESIGN: Retrospective case series. SETTING: Specialist Orthopaedic Group, Mater Hospital Sydney, NSW, Australia. PATIENTS: We evaluated 45 patients who practiced surfing before the onset of pain and hip surgery. Complete clinical and radiographical follow-up and a completed questionnaire were available for 37 (82%) patients. INTERVENTIONS: Hip resurfacing arthroplasty. MAIN OUTCOME MEASURES: Postel-Merle d'Aubigne score, the Oxford hip score, the Harris hip score, and the University of California at Los Angeles activity score. Radiographical evaluation at 6 weeks, 3, and 12 months after surgery and yearly thereafter. Return to surf rates using a specific questionnaire. Complications and failures during follow-up. RESULTS: All clinical scores improved significantly after HRA. Eight of 37 (22%) patients stopped surfing after their HRA. More than 80% of patients commenced surfing within the first 6 months after surgery. During surfing, 21 patients (72%) were completely pain free. CONCLUSION: No literature exists regarding the return to a high-impact sport as surfing after HRA. Most of our patients (71%) were able to return at least to their preoperative level of surfing after surgery. No complications related to this sport activity were observed during short-term follow-up. We believe that surfing is compatible with HRA, but long-term studies are necessary to assess the influence of this extreme sport on loosening and revision rates.
Asunto(s)
Artroplastia de Reemplazo de Cadera , Artroplastia de Reemplazo de Cadera/efectos adversos , Articulación de la Cadera/cirugía , Humanos , Reoperación , Estudios Retrospectivos , Resultado del TratamientoRESUMEN
BACKGROUND: Alumina ceramic-on-ceramic bearings are used in total hip arthroplasty (THA) because of their wear-resistant and inert properties. In this study, we assessed the clinical and radiographic outcomes of patients undergoing primary cementless ceramic-on-ceramic THA at a minimum follow-up of 20 years. METHODS: A series of 301 consecutive primary THAs in 283 patients were assessed. Clinically, patients were assessed with the modified Harris Hip Score (HHS) and pain questionnaires. Anteroposterior radiographs of the pelvis and lateral radiographs of the hip were used to radiologically assess the implant. Patients were classified as lost to follow-up if they could not be contacted on multiple occasions or did not wish to participate further in this study. RESULTS: At twenty years after operation, 60 patients had died of a cause unrelated to surgery, 16 had experienced complications requiring reoperation, and 100 hips had both clinical assessments and radiographs at a minimum of 20 years of follow-up. The average HHS improved from 56.1 (range: 17-89) before THA to 92.5 (range: 63-100) at the latest follow-up. The classification of the HHS was good or excellent in 96.4% of patients. Only 1.8% of patients still had moderate residual pain at the thigh or groin. Radiographically, all patients demonstrated bony ingrowth but no clinical symptoms of loosening. The overall survival rate of the implants was 94.2% at 20 years with revision for any reason as the end point. CONCLUSION: Long-Term follow-up in our series showed excellent implant survival, excellent functional outcomes, and minimal late complications. There was no significant radiographic evidence of failure at a minimum of 20 years after THA. LEVEL OF EVIDENCE: Therapeutic Level IV.
Asunto(s)
Artroplastia de Reemplazo de Cadera , Prótesis de Cadera , Óxido de Aluminio , Artroplastia de Reemplazo de Cadera/efectos adversos , Cerámica , Estudios de Seguimiento , Articulación de la Cadera/diagnóstico por imagen , Articulación de la Cadera/cirugía , Prótesis de Cadera/efectos adversos , Humanos , Diseño de Prótesis , Falla de Prótesis , Resultado del TratamientoRESUMEN
Importance: There remains a lack of randomized trials investigating aspirin monotherapy for symptomatic venous thromboembolism (VTE) prophylaxis following total hip arthroplasty (THA) or total knee arthroplasty (TKA). Objective: To determine whether aspirin was noninferior to enoxaparin in preventing symptomatic VTE after THA or TKA. Design, Setting, and Participants: Cluster-randomized, crossover, registry-nested trial across 31 hospitals in Australia. Clusters were hospitals performing greater than 250 THA or TKA procedures annually. Patients (aged ≥18 years) undergoing hip or knee arthroplasty procedures were enrolled at each hospital. Patients receiving preoperative anticoagulation or who had a medical contraindication to either study drug were excluded. A total of 9711 eligible patients were enrolled (5675 in the aspirin group and 4036 in the enoxaparin group) between April 20, 2019, and December 18, 2020. Final follow-up occurred on August 14, 2021. Interventions: Hospitals were randomized to administer aspirin (100 mg/d) or enoxaparin (40 mg/d) for 35 days after THA and for 14 days after TKA. Crossover occurred after the patient enrollment target had been met for the first group. All 31 hospitals were initially randomized and 16 crossed over prior to trial cessation. Main Outcomes and Measures: The primary outcome was symptomatic VTE within 90 days, including pulmonary embolism and deep venous thrombosis (DVT) (above or below the knee). The noninferiority margin was 1%. Six secondary outcomes are reported, including death and major bleeding within 90 days. Analyses were performed by randomization group. Results: Enrollment was stopped after an interim analysis determined the stopping rule was met, with 9711 patients (median age, 68 years; 56.8% female) of the prespecified 15â¯562 enrolled (62%). Of these, 9203 (95%) completed the trial. Within 90 days of surgery, symptomatic VTE occurred in 256 patients, including pulmonary embolism (79 cases), above-knee DVT (18 cases), and below-knee DVT (174 cases). The symptomatic VTE rate in the aspirin group was 3.45% and in the enoxaparin group was 1.82% (estimated difference, 1.97%; 95% CI, 0.54%-3.41%). This failed to meet the criterion for noninferiority for aspirin and was significantly superior for enoxaparin (P = .007). Of 6 secondary outcomes, none were significantly better in the enoxaparin group compared with the aspirin group. Conclusions and Relevance: Among patients undergoing hip or knee arthroplasty for osteoarthritis, aspirin compared with enoxaparin resulted in a significantly higher rate of symptomatic VTE within 90 days, defined as below- or above-knee DVT or pulmonary embolism. These findings may be informed by a cost-effectiveness analysis. Trial Registration: ANZCTR Identifier: ACTRN12618001879257.
Asunto(s)
Anticoagulantes , Artroplastia de Reemplazo de Cadera , Artroplastia de Reemplazo de Rodilla , Aspirina , Enoxaparina , Tromboembolia Venosa , Anciano , Anticoagulantes/efectos adversos , Anticoagulantes/uso terapéutico , Artroplastia de Reemplazo de Cadera/efectos adversos , Artroplastia de Reemplazo de Rodilla/efectos adversos , Aspirina/efectos adversos , Aspirina/uso terapéutico , Australia , Quimioprevención , Enoxaparina/efectos adversos , Enoxaparina/uso terapéutico , Femenino , Humanos , Masculino , Osteoartritis/cirugía , Complicaciones Posoperatorias/prevención & control , Embolia Pulmonar/etiología , Embolia Pulmonar/prevención & control , Tromboembolia Venosa/etiología , Tromboembolia Venosa/prevención & controlRESUMEN
BACKGROUND: Joint stability is one of the goals of any joint replacement. The contribution of prosthesis design to sagittal stability in total knee arthroplasty (TKA) has emerged as an area of interest. The purpose of this study was to evaluate the sagittal stability of four prosthesis types and determine the effect on patient reported outcome measures (PROMs). METHODS: A matched-cohort cross-sectional study was performed on 60 patients after TKA at 1-year follow-up. Three surgeons performed 10 medially stabilized (MS) TKA and 10 non-MS TKA. Sagittal stability was assessed by a blinded observer using a KT-1000 arthrometer, Lachman's test, and the anterior drawer test. PROMs (Oxford, Knee Injury and Osteoarthritis Outcome Score, Western Ontario and McMaster Universities Osteoarthritis Index, Forgotten joint score) and visual analog scale assessed function and satisfaction. RESULTS: MS TKA had significantly decreased translation on KT-1000 and improved stability compared with non-MS TKA (P < .05). Increased PROMs were demonstrated in the MS TKA group compared with the non-MS TKA group (P < .05). When divided based on objective stability, regardless of the prosthesis type, patients with a stable knee had superior PROMs (P < .05), particularly in sport-related questions. CONCLUSION: The MS TKA had significantly greater sagittal stability, improved PROMs, and satisfaction compared with non-MS TKA. Independent of prosthesis design, patients with greater sagittal stability demonstrated improved PROMs.
Asunto(s)
Artroplastia de Reemplazo de Rodilla , Prótesis de la Rodilla , Osteoartritis de la Rodilla , Afecto , Estudios Transversales , Humanos , Articulación de la Rodilla/cirugía , Osteoartritis de la Rodilla/cirugía , Medición de Resultados Informados por el Paciente , Rango del Movimiento Articular , Resultado del TratamientoRESUMEN
The COVID-19 pandemic has caused us all to stop our normal activities and consider how we can safely return to caring for our patients. There are many common practices (such as an increased use of personal protective equipment) which we are all familiar with that can be easily incorporated into our daily routines. Other actions, such as cleaning more surfaces with solutions such as dilute povidone iodine or changing the air filtration systems used within operating room theaters, may require more extensive efforts on our behalf. In this article, we have attempted to highlight some of the changes that arthroplasty surgeons may need to instigate when we are able to resume elective joint arthroplasty procedures in an effort to disrupt the chain of pathogen transfer.
Asunto(s)
Betacoronavirus/fisiología , Infecciones por Coronavirus/prevención & control , Procedimientos Quirúrgicos Electivos , Pandemias/prevención & control , Neumonía Viral/prevención & control , COVID-19 , Infecciones por Coronavirus/transmisión , Humanos , Control de Infecciones/métodos , Quirófanos , Equipo de Protección Personal , Neumonía Viral/transmisión , SARS-CoV-2RESUMEN
BACKGROUND: Squeaking is an on-going complication with a variable incidence of 0.5%-20.7%. The mechanism of squeaking has not been understood completely and is most likely multifactorial in nature. Previously, we have reported on a squeaking rate of 7.3% at 2 years. Our current results show a substantial increase in the squeaking incidence from 7.3% to 17.4% with the DeltaMotion articulation at the 5-year follow-up. METHODS: Two hundred six total hip arthroplasties with a large ceramic-on-ceramic bearing were performed on 195 patients by 2 senior authors. The minimum duration of follow-up was 5 years (range 5-6.2). RESULTS: The mean Harris Hip Score remained stable at 91.7 at 5 years compared to 92 after 2 years. However, we observed an increase in the squeaking rate from 7.3% after 2 years to 17.4% after 5 years. As in previous studies, we did not find significant differences between the silent and squeaking group in relation to age, height, weight, and femoral head diameter. In contrast, others reported no significant differences regarding range of motion and gender between the silent and the squeaking hip group at 2 years of follow-up, whereas at 5 years, the squeaking group showed a significantly higher combined range of motion and a higher relative risk of squeaking in women compared to the silent group. CONCLUSION: While large diameter ceramic bearings may produce squeaking, especially in female patients, our mid-term clinical results of a large ceramic-on-ceramic bearing in total hip arthroplasty are encouraging. Nevertheless, long-term follow-up is recommended.
Asunto(s)
Artroplastia de Reemplazo de Cadera/efectos adversos , Cerámica , Prótesis de Cadera , Diseño de Prótesis , Adulto , Anciano , Anciano de 80 o más Años , Femenino , Cabeza Femoral , Estudios de Seguimiento , Humanos , Incidencia , Masculino , Persona de Mediana Edad , Falla de Prótesis , Rango del Movimiento Articular , Índice de Severidad de la Enfermedad , Factores Sexuales , SonidoRESUMEN
The sulcus line (SL) is a three-dimensional landmark that corrects for individual variation in the coronal alignment of the trochlear groove in contrast to the traditional Whiteside's line (WL). Femoral rotational asymmetry (FRA) is an anatomical variation in which the posterior condyles and trochlear groove are not perpendicular to each other. This study aims to measure the SL and assess its reliability relative to WL, in addition to measuring and classifying the FRA. A retrospective analysis of a series of 191 CT scans of nonarthritic knees was performed. Measurements were taken of rotational landmarks in three-dimensional reconstructions. The variability and outlier rate of SL was less than WL (P < 0.05), however, it was also greater than the posterior condylar line (PC) (P < 0.05). Averaging the PC + 3° and the SL did not change the rate of femoral malrotation relative to the surgical epicondylar axis (SEA) (P > 0.05), however it decreased the rate of change of the rotational alignment of the trochlear groove between the native knee and the prosthetic knee from 31% to 5% (P < 0.05). FRA was classified and was >5° in 56/191 (29%) of cases. The SL technique is more accurate than WL for determining the rotational alignment of the trochlear groove. Nonarthritic femora have a high rate of rotational asymmetry. Identifying and classifying FRA in individual cases allows the femoral component to be inserted in a position which gives the best possible match to both the native posterior condyles and trochlear groove. Clin. Anat. 31:551-559, 2018. © 2018 Wiley Periodicals, Inc.
Asunto(s)
Fémur/anatomía & histología , Puntos Anatómicos de Referencia , Variación Anatómica , Humanos , Estudios Retrospectivos , RotaciónRESUMEN
BACKGROUND: Dislocation is a leading cause of revision after primary total hip arthroplasty (THA). Although more common in the first few years after the procedure, dislocation can occur at any time. This study investigated the difference in late dislocation in ceramic-on-ceramic (CoC) bearings compared with metal-on-polyethylene and ceramic-on-polyethylene bearings in THA. METHODS: Data were used from the Australian Orthopaedic Association National Joint Replacement Registry, and the cumulative percent revision for dislocation was estimated using the Kaplan-Meier method for the different bearing surfaces. There were 192,275 THAs included in the study with 101,915 metal-on-cross-linked polyethylene (MoXLPE), 30,256 ceramic-on-cross-linked polyethylene (CoXLPE), and 60,104 CoC. RESULTS: The cumulative percent revision for dislocation at 13 years for MoXLPE, CoXLPE, and CoC groups was 1.2 (95% confidence interval [CI], 1.1-1.3), 1.0 (95% CI, 0.7-1.4), and 0.9 (95% CI, 0.8-1.1), respectively. There was an increased risk of revision for dislocation for MoXLPE compared with CoXLPE and CoC. When stratified for head size, there was no difference in the risk of revision for dislocation between MoXLPE, CoXLPE, and CoC in the 28- and 32-mm head sizes. With a head size of 36 mm, MoXLPE had a higher rate of dislocation compared with other materials. CONCLUSION: Bearing surface has little impact on revision for dislocation.
Asunto(s)
Artroplastia de Reemplazo de Cadera/efectos adversos , Luxación de la Cadera/etiología , Prótesis de Cadera/efectos adversos , Materiales Biocompatibles , Cerámica , Humanos , Masculino , Metales , Polietileno , Diseño de Prótesis/efectos adversos , Falla de Prótesis , Sistema de Registros , ReoperaciónRESUMEN
We analyzed the results of 206 consecutive total hip arthroplasties performed using large diameter ceramic-on-ceramic bearings. At an average follow-up of 28months, the mean Harris Hip Score improved from 54 to 92. Fifteen (7.3%) hips were noted to squeak. There was no significant difference between silent and squeaking hips with regards to age, weight, height, BMI, range of movement, femoral head diameter, leg length, and offset or center of rotation. No correlation was present between incidence of squeaking and increasing cup inclination and anteversion. 5.2% of cups orientated within Lewinnek's safe zone squeaked. No hips required revision for squeaking. While large diameter ceramic bearings may produce squeaking, our early results of surgery using large head ceramic bearings are encouraging. However, long-term follow-up is required.
Asunto(s)
Artroplastia de Reemplazo de Cadera/instrumentación , Cerámica/efectos adversos , Prótesis de Cadera/efectos adversos , Adulto , Anciano , Anciano de 80 o más Años , Aleaciones , Materiales Biocompatibles , Femenino , Humanos , Incidencia , Masculino , Persona de Mediana Edad , Diseño de Prótesis , TitanioRESUMEN
We present a long-term follow-up report of 33 cementless total hip arthroplasties in 27 patients who have an established diagnosis of Paget's disease. The medium term results of this series were reported in 2007 (Lusty et al. Journal of Arthroplasty. 2007;22:692). Fourteen cases were available for follow-up at an average of 12.3 years (range 10-17). Harris Hip scores improved from 56/100 preoperatively (16-98/100) to 83/100 post operatively (72-90/100). All surviving components were radiographically ingrown. Based on these findings, cementless total hip arthroplasty has a good long-term outcome in Paget's disease.
Asunto(s)
Artroplastia de Reemplazo de Cadera , Osteítis Deformante/cirugía , Anciano , Anciano de 80 o más Años , Cementación , Femenino , Estudios de Seguimiento , Articulación de la Cadera/cirugía , Humanos , Masculino , Persona de Mediana Edad , Estudios Retrospectivos , Resultado del TratamientoRESUMEN
1420 primary cementless THRs with a minimum follow-up of 10-years were stratified according to BMI: non-obese (BMI<30kg/m(2)) and obese (BMI≥30kg/m(2)). Median age at surgery was younger in obese patients (P<0.001). We case-matched 82 THRs in obese patients with 162 THRs in non-obese patients. No difference between groups was found in improvement in HHS (P=0.668), satisfaction with surgery (P=0.644), range of movement, prosthesis orientation, or radiological loosening. The obese cohort was further separated into those with a BMI below and above 35. No difference was found between groups in improvement in HHS, satisfaction with surgery, component orientation, or radiological loosening. There was no difference in the incidence of post-operative complications between obese and non-obese patients. After 10-years, the results of THR are not compromised by obesity.
Asunto(s)
Artroplastia de Reemplazo de Cadera/métodos , Índice de Masa Corporal , Obesidad/complicaciones , Osteoartritis de la Cadera/complicaciones , Osteoartritis de la Cadera/cirugía , Falla de Prótesis/etiología , Anciano , Anciano de 80 o más Años , Estudios de Casos y Controles , Femenino , Fracturas del Cuello Femoral/etiología , Estudios de Seguimiento , Humanos , Luxaciones Articulares/etiología , Masculino , Persona de Mediana Edad , Satisfacción del Paciente , Infección de la Herida Quirúrgica/etiología , Resultado del TratamientoRESUMEN
BACKGROUND: Accurate pre-surgical templating of the pelvic tilt (PT) angle is essential for hip and spine surgeries, yet the reliability of PT annotations is often compromised by human error, inherent subjectivity, and variations in radiographic quality. This study aims to identify challenges leading to inadequate annotations at a landmark dimension and evaluating their impact on PT. METHODS: We retrospectively collected 115 consecutive sagittal radiographs for the measurement of PT based on two definitions: the anterior pelvic plane and a line connecting the femoral head's centre to the sacral plate's midpoint. Five annotators engaged in the measurement, followed by a secondary review to assess the adequacy of the annotations across all the annotators. RESULTS: The outcomes indicated that over 60% images had at least one landmark considered inadequate by the majority of the reviewers, with poor image quality, outliers, and unrecognized anomalies being the primary causes. Such inadequacies led to discrepancies in the PT measurements, ranging from -2° to 2°. CONCLUSION: This study highlights that landmarks annotated from clear anatomical references were more reliable than those estimated. It also underscores the prevalence of suboptimal annotations in PT measurements, which extends beyond the scope of traditional statistical analysis and could result in significant deviations in individual cases, potentially impacting clinical outcomes.
RESUMEN
BACKGROUND: Accurate preoperative templating is essential for the success of hip resurfacing arthroplasty (HRA). While digital radiograph is currently considered the gold standard, stereoradiograph and CT converted 3D methods have shown promising results. However, there is no consensus in the literature regarding the preferred modality for HRA templating, and angular measurements are often overlooked. Thus, this study aimed to: (1) compare the performances of different modality in implant sizing and angle measurements, (2) evaluate the measurement reproducibility, (3) assess the impact of severe osteoarthritis on femoral head sizing, and (4) based on the analysis above, explore the optimal imaging and planning strategy for HRA. HYPOTHESIS: An optimal imaging modality exists for HRA planning regarding implant sizing and angular measurements. MATERIALS AND METHODS: Preoperative imaging data from seventy-seven HRA surgeries were collected. Three raters performed templating using digital radiograph, stereoradiograph, and CT converted 3D models. Measurements for femoral head size, neck-shaft angle, and calcar-shaft angle were obtained. The femoral head sizing was compared to the intraoperative clinical decision. The reproducibility of measurements was assessed using the intraclass correlation coefficient (ICC). Correlations were examined between sizing disagreement and osteoarthritis grade (Tonnis Classification). RESULTS: Digital radiograph, stereoradiograph, and 3D techniques predicted one size off target in 27/77 (35%), 49/70 (70%), and 75/77 (97%) of cases, respectively, corresponding to 1.8±1.6 (0 to 5.67), 0.9±0.7 (0 to 2.67), and 0.4±0.4 (0 to 1.67) sizes off target, indicating statistically significant differences among all three modalities, with p-values all below 0.01. There were no statistically significant differences among the different modalities for angular measurements. Measurements showed moderate to excellent reproducibility (ICC=0.628-0.955). High-grade osteoarthritis did not impact image sizing in any modality (r=0.08-0.22, all p>0.05). DISCUSSION: CT converted 3D models were more accurate for implant sizing in HRA, but did not significantly outperform other modalities in angular measurements. Given the high costs and increased radiation exposure associated with CT, the study recommended using CT scans selectively, particularly for precise femoral head sizing, while alternative imaging methods can be effectively used for angular measurements. LEVEL OF EVIDENCE: III; retrospective comparative diagnostic study.
RESUMEN
Pelvic tilt (PT) is an important parameter for orthopedic surgeries involving hip and spine, typically determined from sagittal pelvic radiographs. However, various challenges can compromise the feasibility of measurement from sagittal imaging, including obscured landmarks, anatomical variations, hardware interference, and limited medical resources. Addressing these challenges and with the aim of reducing radiation exposure to patients, our study developed a novel method to estimate PT from antero-posterior (AP) radiographs, using vertical distances from the pelvic outlet and obturator foramen. We correlated these measurements with PT, defined both anatomically (anterior pelvic plane, PTa) and mechanically (centers of femoral heads and sacral plate, PTm). The study explored creating linear, exponential, and multivariate regression models based on twelve 3D CT-derived pelvic models (six men, six women), simulating AP radiograph projections with controlled PTs. We then validated these models against 105 pairs of patient stereoradiographs. Statistical analysis revealed that combined exponential-linear models yielded the most accurate results, with Pearson correlation coefficients of 0.75 for PTa and 0.77 for PTm, and mean absolute errors of 3.7° ± 2.6° for PTa and 4.5° ± 3.4° for PTm, showing excellent measurement reliability (all ICCs > 0.9) without significant gender discrepancies. In conclusion, this study presents a validated, simple, and accessible method for estimating PT using AP radiograph parameters, supported by the Supporting Information S1: Excel Tool, showing great potential for clinical application in hip and spine procedures.
RESUMEN
This study aims to identify preoperative risk factors for iliopsoas tendonitis after total hip arthroplasty, a complication typically attributed to acetabular cup position and orientation, using a validated iliopsoas impingement detection simulation. Analyzing CT scans and X-rays of 448 patients using a validated preoperative planning protocol, patients were simulated for iliopsoas impingement and categorized into at-risk and not at-risk groups based on a prior validation study, with a 23% at-risk incidence. Implementing a propensity score matching algorithm to reduce covariate imbalance, we identified factors that may exacerbate risk of iliopsoas tendonitis. Parameters that were investigated included standing pelvic tilt, functional femoral rotation, and the difference between the planned acetabular cup diameter and native femoral head diameter (ΔC-NFH). Comparing pelvic tilt, we found a significant difference between the groups (at-risk: -6.0°, not at-risk: -0.7°; p << 0.01). A similar trend was noted for ΔC-NFH (at-risk: +5.7 mm, not at-risk: +5.1 mm; p = 0.01). Additional simulations of at-risk patients indicated increased anteversion of the acetabular cup reduces impingement risk more effectively than medialisation. These findings suggest that spinopelvic parameters may exacerbate iliopsoas irritation risk, underscoring their importance in preoperative planning and patient expectation management. Similar findings of a greater than 6 mm difference between cup size and native femoral head diameter being a significant risk for iliopsoas tendonitis have been observed before, underscoring its potential veracity. These results may provide surgeons with a simple threshold that can be used in determining a cup size to reduce the risk of iliopsoas tendonitis.