Largely Pseudocapacitive Two-Dimensional Conjugated Metal-Organic Framework Anodes with Lowest Unoccupied Molecular Orbital Localized in Nickel-bis(dithiolene) Linkages.

Although two-dimensional conjugated metal-organic frameworks (2D c-MOFs) provide an ideal platform for precise tailoring of capacitive electrode materials, high-capacitance 2D c-MOFs for non-aqueous supercapacitors remain to be further explored. Herein, we report a novel phthalocyanine-based nickel-bis(dithiolene) (NiS4)-linked 2D c-MOF (denoted as Ni2[CuPcS8]) with outstanding pseudocapacitive properties in 1 M TEABF4/acetonitrile. Each NiS4 linkage is disclosed to reversibly accommodate two electrons, conferring the Ni2[CuPcS8] electrode a two-step Faradic reaction with a record-high specific capacitance among the reported 2D c-MOFs in non-aqueous electrolytes (312 F g-1) and remarkable cycling stability (93.5% after 10,000 cycles). Multiple analyses unveil that the unique electron-storage capability of Ni2[CuPcS8] originates from its localized lowest unoccupied molecular orbital (LUMO) over the nickel-bis(dithiolene) linkage, which allows the efficient delocalization of the injected electrons throughout the conjugated linkage units without inducing apparent bonding stress. The Ni2[CuPcS8] anode is used to demonstrate an asymmetric supercapacitor device that delivers a high operating voltage of 2.3 V, a maximum energy density of 57.4 Wh kg-1, and ultralong stability over 5000 cycles.

Descriptor-Driven Computational Design of Bifunctional Double-Atom Hydrogen Evolution and Oxidation Reaction Electrocatalysts for Rechargeable Hydrogen Gas Batteries.

Rechargeable hydrogen gas batteries (RHGBs) have been attracting much attention as promising all-climate large-scale energy storage devices, which calls for low-cost and high-activity hydrogen evolution/oxidation reaction (HER/HOR) bifunctional electrocatalysts to replace the costly platinum-based catalysts. Based on density functional theory (DFT) computations, herein we report an effective descriptor-driven design principle to govern the HER/HOR electrocatalytic activity of double-atom catalysts (DACs) for RHGBs. We systematically investigate the d-band center variation of DACs and their correlations with HER/HOR free energies. We construct activity maps with the d-band center of DACs as a descriptor, which demonstrate that high HER/HOR electrocatalytic activity can be achieved with an appropriate d-band center of DACs. This work not only broadens the applicability of d-band center theory to the prediction of bifunctional HER/HOR electrocatalysts but also paves the way to fast screening and design of efficient and low-cost DACs to promote practical applications of RHGBs.

Porous Polymer Cubosomes with Ordered Single Primitive Bicontinuous Architecture and Their Sodium-Iodine Batteries.

Bicontinuous porous materials, which possess 3D interconnected pore channels facilitating a smooth mass transport, have attracted much interest in the fields of energy and catalysis. However, their synthesis remains very challenging. We report a general approach, using polymer cubosomes as the template, for the controllable synthesis of bicontinuous porous polymers with an ordered single primitive (SP) cubic structure, including polypyrrole (SP-PPy), poly-m-phenylenediamine (SP-PmPD), and polydopamine (SP-PDA). Specifically, the resultant SP-PPy had a unit cell parameter of 99 nm, pore diameter of 45 nm, and specific surface area of approximately 60 m2·g-1. As a proof of concept, the I2-adsorbed SP-PPy was employed as the cathode materials of newly emerged Na-I2 batteries, which delivered a record-high specific capacity (235 mA·h·g-1 at 0.5 C), excellent rate capability, and cycling stability (with a low capacity decay of 0.12% per cycle within 400 cycles at 1 C). The advantageous contributions of the bicontinuous structure and I3- adsorption mechanism of SP-PPy were revealed by a combination of ion diffusion experiments and theoretical calculations. This study opens a new avenue for the synthesis of porous polymers with new topologies, broadens the spectrum of bicontinuous-structured materials, and also develops a novel potential application for porous polymers.

An Efficient Rechargeable Aluminium-Amine Battery Working Under Quaternization Chemistry.

Rechargeable aluminium (Al) batteries (RABs) have long-been pursued due to the high sustainability and three-electron-transfer properties of Al metal. However, limited redox chemistry is available for rechargeable Al batteries, which restricts the exploration of cathode materials. Herein, we demonstrate an efficient Al-amine battery based on a quaternization reaction, in which nitrogen (radical) cations (R3 N.+ or R4 N+ ) are formed to store the anionic Al complex. The reactive aromatic amine molecules further oligomerize during cycling, inhibiting amine dissolution into the electrolyte. Consequently, the constructed Al-amine battery exhibits a high reversible capacity of 135 mAh g-1 along with a superior cycling life (4000 cycles), fast charge capability and a high energy efficiency of 94.2 %. Moreover, the Al-amine battery shows excellent stability against self-discharge, far beyond conventional Al-graphite batteries. Our findings pave an avenue to advance the chemistry of RABs and thus battery performance.

Dual-Redox-Sites Enable Two-Dimensional Conjugated Metal-Organic Frameworks with Large Pseudocapacitance and Wide Potential Window.

Advanced supercapacitor electrodes require the development of materials with dense redox sites embedded into conductive and porous skeletons. Two-dimensional (2D) conjugated metal-organic frameworks (c-MOFs) are attractive supercapacitor electrode materials due to their high intrinsic electrical conductivities, large specific surface areas, and quasi-one-dimensional aligned pore arrays. However, the reported 2D c-MOFs still suffer from unsatisfying specific capacitances and narrow potential windows because large and redox-inactive building blocks lead to low redox-site densities of 2D c-MOFs. Herein, we demonstrate the dual-redox-site 2D c-MOFs with copper phthalocyanine building blocks linked by metal-bis(iminobenzosemiquinoid) (M2[CuPc(NH)8], M = Ni or Cu), which depict both large specific capacitances and wide potential windows. Experimental results accompanied by theoretical calculations verify that phthalocyanine monomers and metal-bis(iminobenzosemiquinoid) linkages serve as respective redox sites for pseudocapacitive cation (Na+) and anion (SO42-) storage, enabling the continuous Faradaic reactions of M2[CuPc(NH)8] occurring in a large potential window of -0.8 to 0.8 V vs Ag/AgCl (3 M KCl). The decent conductivity (0.8 S m-1) and high active-site density further endow the Ni2[CuPc(NH)8] with a remarkable specific capacitance (400 F g-1 at 0.5 A g-1) and excellent rate capability (183 F g-1 at 20 A g-1). Quasi-solid-state symmetric supercapacitors are further assembled to demonstrate the practical application of Ni2[CuPc(NH)8] electrode, which deliver a state-of-the-art energy density of 51.6 Wh kg-1 and a peak power density of 32.1 kW kg-1.

Facile assembly of layer-interlocked graphene heterostructures as flexible electrodes for Li-ion batteries.

Flexible electrodes with robust mechanical properties and high electrochemical performance are of significance for the practical implementation of flexible batteries. Here we demonstrate a general and straightforward co-assembly approach to prepare flexible electrodes, where electrochemically exfoliated graphene (EG) is exploited as the film former/conducting matrix and different binary metal oxides (Li4Ti5O12, LiCoO2, Li2MnO4, LiFePO4) are incorporated. The resultant EG-metal oxide hybrids exhibit a unique layer-interlocked structure, where the metal oxide is conformably wrapped by the highly flexible graphene. Due to numerous contact interphases generated between EG and the intercalated material, the hybrid films show high flexibility and can endure rolling, bending, folding and even twisting. When serving as the anode for Li-ion batteries, the freestanding EG-Li4Ti5O12 hybrid presents a characteristic flat discharge plateau at 1.55 V (vs. Li/Li+), indicating transformation of Li4Ti5O12 to Li7Ti5O12. Small polarization, high rate capability and excellent cycling stability against mechanical bending are also demonstrated for the prepared EG-Li4Ti5O12 hybrid. Finally, full cells composed of EG-Li4Ti5O12 and EG-LiFePO4 hybrids show impressive cycling (98% capacity retention after 100 cycles at 1C) and rate performance (84% capacity retained at 2.5C). The straightforward co-assembly approach based on EG can be extended to other two-dimensional layered materials for constructing highly efficient flexible energy storage devices.

Oligophenyls with Multiple Disulfide Bridges as Higher Homologues of Dibenzo[c,e][1,2]dithiin: Synthesis and Application in Lithium-Ion Batteries.

Higher homologues of dibenzo[c,e][1,2]dithiin were synthesized from oligophenyls bearing multiple methylthio groups. Single-crystal X-ray analyses revealed their nonplanar structures and helical enantiomers of higher meta-congener 6. Such dibenzo[1,2]dithiin homologues are demonstrated to be applicable to lithium-ion batteries as cathode, displaying a high capacity of 118 mAh g-1 at a current density of 50 mA g-1 .

Two-dimensional materials for miniaturized energy storage devices: from individual devices to smart integrated systems.

Nowadays, the increasing requirements of portable, implantable, and wearable electronics have greatly stimulated the development of miniaturized energy storage devices (MESDs). Electrochemically active materials and microfabrication techniques are two indispensable parts in MESDs. Particularly, the architecture design of microelectrode arrays is beneficial to the accessibility of two-dimensional (2D) active materials. Therefore, this study reviews the recent advancements in microbatteries and microsupercapacitors based on electrochemically active 2D materials. Emerging microfabrication strategies enable the precise control over the thickness, homogeneity, structure, and dimension in miniaturized devices, which offer tremendous opportunities for achieving both high energy and power densities. Furthermore, smart functions and integrated systems are discussed in detail in light of the emergence of intelligent and interactive modes. Finally, future developments, opportunities, and urgent challenges related to 2D materials, device fabrications, smart responsive designs, and microdevice integrations are provided.

WS2-Graphite Dual-Ion Batteries.

A novel WS2-graphite dual-ion battery (DIB) is developed by combining a conventional graphite cathode and a high-capacity few-layer WS2-flake anode. The WS2 flakes are produced by exploiting wet-jet milling (WJM) exfoliation, which allows large-scale and free-material loss production (i.e., volume up to 8 L h-1 at concentration of 10 g L-1 and exfoliation yield of 100%) of few-layer WS2 flakes in dispersion. The WS2 anodes enable DIBs, based on hexafluorophosphate (PF6-) and lithium (Li+) ions, to achieve charge-specific capacities of 457, 438, 421, 403, 295, and 169 mAh g-1 at current rates of 0.1, 0.2, 0.3, 0.4, 0.8, and 1.0 A g-1, respectively, outperforming conventional DIBs. The WS2-based DIBs operate in the 0 to 4 V cell voltage range, thus extending the operating voltage window of conventional WS2-based Li-ion batteries (LIBs). These results demonstrate a new route toward the exploitation of WS2, and possibly other transition-metal dichalcogenides, for the development of next-generation energy-storage devices.

Production of homogeneous glycoprotein with multisite modifications by an engineered N-glycosyltransferase mutant.

Naturally occurring N-glycoproteins exhibit glycoform heterogeneity with respect to N-glycan sequon occupancy (macroheterogeneity) and glycan structure (microheterogeneity). However, access to well-defined glycoproteins is always important for both basic research and therapeutic purposes. As a result, there has been a substantial effort to identify and understand the catalytic properties of N-glycosyltransferases, enzymes that install the first glycan on the protein chain. In this study we found that ApNGT, a newly discovered cytoplasmic N-glycosyltransferase from Actinobacillus pleuropneumoniae, has strict selectivity toward the residues around the Asn of N-glycosylation sequon by screening a small library of synthetic peptides. The inherent stringency was subsequently demonstrated to be closely associated with a critical residue (Gln-469) of ApNGT which we propose hinders the access of bulky residues surrounding the occupied Asn into the active site. Site-saturated mutagenesis revealed that the introduction of small hydrophobic residues at the site cannot only weaken the stringency of ApNGT but can also contribute to enormous improvement of glycosylation efficiency against both short peptides and proteins. We then employed the most efficient mutant (Q469A) other than the wild-type ApNGT to produce a homogeneous glycoprotein carrying multiple (up to 10) N-glycans, demonstrating that this construct is a promising biocatalyst for potentially addressing the issue of macroheterogeneity in glycoprotein preparation.

Cobalt-Based Metal-Organic Framework Nanoarrays as Bifunctional Oxygen Electrocatalysts for Rechargeable Zn-Air Batteries.

Owing to their high theoretical energy density, environmental benign character, and low cost, rechargeable Zn-air batteries have emerged as an attractive energy technology. Unfortunately, their energy efficiency is seriously plagued by sluggish oxygen evolution reaction (OER) and oxygen reduction reaction (ORR) that alternately occurs on air electrodes. Herein, we demonstrate Co-based metal-organic framework (Co(bpdc)(H2 O)4 (bpdc=biphenyl -4, 4'-dicarboxylic acid), Co-MOF) arrays as novel bifunctional oxygen electrocatalysts. The Co-MOF is in situ constructed on a three-dimensional graphite foam (GF) through a hydrothermal reaction. In a 1 m KOH aqueous solution, the resultant Co-MOF/GF exhibits an OER overpotential of only ≈220 mV at 10 mA cm-2 , which is much lower than those for Ir/C and previously reported noble metal-free electrocatalysts. In conjunction with its ORR half-wave potential of 0.7 V (vs. RHE), the Co-MOF/GF manifests a greatly decreased potential gap of ≈0.75 V in comparison with Pt/C-Ir/C couple and previously reported bifunctional oxygen electrocatalysts. Furthermore, an assembled rechargeable zinc-air battery using Co-MOF electrocatalyst in an air electrode delivers a maximum power density of 86.2 mW cm-2 and superior charge-discharge performance. Microscopic, spectroscopic and electrochemical analyses prove that the initial Co-MOF is transformed into Co-oxyhydroxides during the OER and ORR process, which essentially serve as bifunctional active centers.

Latest advances in supercapacitors: from new electrode materials to novel device designs.

Notably, many significant breakthroughs for a new generation of supercapacitors have been reported in recent years, related to theoretical understanding, material synthesis and device designs. Herein, we summarize the state-of-the-art progress toward mechanisms, new materials, and novel device designs for supercapacitors. Firstly, fundamental understanding of the mechanism is mainly focused on the relationship between the structural properties of electrode materials and their electrochemical performances based on some in situ characterization techniques and simulations. Secondly, some emerging electrode materials are discussed, including metal-organic frameworks (MOFs), covalent organic frameworks (COFs), MXenes, metal nitrides, black phosphorus, LaMnO3, and RbAg4I5/graphite. Thirdly, the device innovations for the next generation of supercapacitors are provided successively, mainly emphasizing flow supercapacitors, alternating current (AC) line-filtering supercapacitors, redox electrolyte enhanced supercapacitors, metal ion hybrid supercapacitors, micro-supercapacitors (fiber, plane and three-dimensional) and multifunctional supercapacitors including electrochromic supercapacitors, self-healing supercapacitors, piezoelectric supercapacitors, shape-memory supercapacitors, thermal self-protective supercapacitors, thermal self-charging supercapacitors, and photo self-charging supercapacitors. Finally, the future developments and key technical challenges are highlighted regarding further research in this thriving field.

Fluoride-Free Synthesis of Two-Dimensional Titanium Carbide (MXene) Using A Binary Aqueous System.

Two-dimensional (2D) titanium carbide (Ti3 C2 ) is emerging as an important member of the MXene family. However, fluoride-based synthetic procedures remain an impediment to the practical applications of this promising class of materials. Here we demonstrate an efficient fluoride-free etching method based on the anodic corrosion of titanium aluminium carbide (Ti3 AlC2 ) in a binary aqueous electrolyte. The dissolution of aluminium followed by in situ intercalation of ammonium hydroxide results in the extraction of carbide flakes (Ti3 C2 Tx , T=O, OH) with sizes up to 18.6 µm and high yield (over 90 %) of mono- and bilayers. All-solid-state supercapacitor based on exfoliated sheets exhibits high areal and volumetric capacitances of 220 mF cm-2 and 439 F cm-3 , respectively, at a scan rate of 10 mV s-1 , superior to those of LiF/HCl-etched MXenes. Our strategy paves a safe way to the scalable synthesis and application of MXene materials.

Persulfurated Coronene: A New Generation of "Sulflower".

We report the first synthesis of a persulfurated polycyclic aromatic hydrocarbon (PAH) as a next-generation "sulflower." In this novel PAH, disulfide units establish an all-sulfur periphery around a coronene core. The structure, electronic properties, and redox behavior were investigated by microscopic, spectroscopic and electrochemical methods and supported by density functional theory. The sulfur-rich character of persulfurated coronene renders it a promising cathode material for lithium-sulfur batteries, displaying a high capacity of 520 mAh g-1 after 120 cycles at 0.6 C with a high-capacity retention of 90%.

Soft-Template Construction of 3D Macroporous Polypyrrole Scaffolds.

A bottom-up approach toward 3D hierarchical macroporous polypyrrole aerogels is demonstrated via soft template-directed synthesis and self-assembly of ultrathin polypyrrole nanosheets in solution, which present interconnected macropores, ultrathin walls, and large specific surface areas, thereby exhibiting a high capacity, satisfactory rate capability, and excellent cycling stability for Na-ion storage.

Dual-Graphene Rechargeable Sodium Battery.

Sodium (Na) ion batteries are attracting increasing attention for use in various electrical applications. However, the electrochemical behaviors, particularly the working voltages, of Na ion batteries are substantially lower than those of lithium (Li) ion batteries. Worse, the state-of-the-art Na ion battery cannot meet the demand of miniaturized in modern electronics. Here, we demonstrate that electrochemically exfoliated graphene (EG) nanosheets can reversibly store (PF6- ) anions, yielding high charging and discharging voltages of 4.7 and 4.3 V vs. Na+ /Na, respectively. The dual-graphene rechargeable Na battery fabricated using EG as both the positive and negative electrodes provided the highest operating voltage among all Na ion full cells reported to date, together with a maximum energy density of 250 Wh kg-1 . Notably, the dual-graphene rechargeable Na microbattery exhibited an areal capacity of 35 µAh cm-2 with stable cycling behavior. This study offers an efficient option for the development of novel rechargeable microbatteries with ultra-high operating voltage and high energy density.

A Quasi-Solid-State Li-Ion Capacitor Based on Porous TiO2 Hollow Microspheres Wrapped with Graphene Nanosheets.

The quasi-solid-state Li-ion capacitor is demonstrated with graphene nanosheets prepared by an electrochemical exfoliation as the positive electrode and the porous TiO2 hollow microspheres wrapped with the same graphene nanosheets as the negative electrode, using a Li-ion conducting gel polymer electrolyte. This device may be the key to bridging the gap between conventional lithium-ion batteries and supercapacitors, meanwhile meeting the safety demands of electronic devices.

LiMn2O4 nanotube as cathode material of second-level charge capability for aqueous rechargeable batteries.

LiMn2O4 nanotube with a preferred orientation of (400) planes is prepared by using multiwall carbon nanotubes as a sacrificial template. Because of the nanostructure and preferred orientation, it shows a superfast second-level charge capability as a cathode for aqueous rechargeable lithium battery. At the charging rate of 600C (6 s), 53.9% capacity could be obtained. Its reversible capacity can be 110 mAh/g, and it also presents excellent cycling behavior due to the porous tube structure to buffer the strain and stress from Jahn-Teller effects.

Facet-Dependent Ni Segregation in a Micron-Sized Single-Crystal Li1.2Ni0.2Mn0.6O2 Cathode.

Elemental surface segregation in cathode materials is critical for determining the phase and interfacial reaction between the electrode and electrolyte, which consequently affects the electrochemical properties. Single-crystal cathodes of Li1.2Ni0.2Mn0.6O2 and Li1.2Ni0.2Mn0.6O1.95F0.05 with octahedral morphologies of (102)- and (003)-dominated facets have been manifested to show enhanced electrochemical properties. However, the surface structural features of such single crystals have not been investigated. Herein, using scanning transmission electron microscopy, energy dispersive X-ray spectroscopy, and electron energy loss spectroscopy, we probe the elemental surface segregation characteristics in these single-crystal cathodes. We reveal that Ni surface segregation shows dependence on the crystal facet such that it occurs on crystal facets with a mix of cations and anions but not on the facets with only cations or anions. Furthermore, facet-dependent surface reconstructions are observed, featuring a spinel-like structure at the Ni-rich facet but a rock-salt structure at the facet without Ni segregation. The commonly known Mn reduction appears at the single-crystal surfaces and is more pronounced at the facet without Ni segregation. We further reveal that fluorination leads to stabilization of surface oxygens. This study provides detailed structural and chemical information about the facet-dependent Ni surface segregation and the resulting phase formation in the rather less explored micron-sized octahedral Li1.2Ni0.2Mn0.6O2 and Li1.2Ni0.2Mn0.6O1.95F0.05 single crystals, which is key to further exploration of the electrochemical properties of the cathodes in the form of microsized single crystals.

Fluorination Effect on Lithium- and Manganese-Rich Layered Oxide Cathodes.

Lithium- and manganese-rich (LMR) layered oxides are promising high-energy cathodes for next-generation lithium-ion batteries, yet their commercialization has been hindered by a number of performance issues. While fluorination has been explored as a mitigating approach, results from polycrystalline-particle-based studies are inconsistent and the mechanism for improvement in some reports remains unclear. In the present study, we develop an in situ fluorination method that leads to fluorinated LMR with no apparent impurities. Using well-defined single-crystal Li1.2Ni0.2Mn0.6O2 (LNMO) as a platform, we show that a high fluorination level leads to decreased oxygen activities, reduced side reactions at high voltages, and a broadly improved cathode performance. Detailed characterization reveals a particle-level Mn3+ concentration gradient from the surface to the bulk of fluorinated-LNMO crystals, ascribed to the formation of a Ni-rich LizNixMn2-xO4-yFy (x > 0.5) spinel phase on the surface and a "spinel-layered" coherent structure in the bulk where domains of a LiNi0.5Mn1.5O4 high-voltage spinel phase are integrated into the native layered framework. This work provides fundamental understanding of the fluorination effect on LMR and key insights for future development of high-energy Mn-based cathodes with an intergrown/composite crystal structure.