Lattice Strain and Charge Redistribution of Pt Cluster/Ir Metallene Heterostructure for Ethylene Glycol to Glycolic Acid Conversion Coupled with Hydrogen Production.

Upgrading overall water splitting (OWS) system and developing high-performance electrocatalysts is an attractive way to the improve efficiency and reduce the consumption of hydrogen (H2 ) production from electrolyzed water. Here, a Pt cluster/Ir metallene heterojunction structure (Pt/Ir hetero-metallene) with a unique Pt/Ir interface is reported for the conversion of ethylene glycol (EG) to glycolic acid (GA) coupled with H2 production. With the assistance of ethylene glycol oxidation (EGOR), the Pt/Ir||Pt/Ir hetero-metallene two-electrode water electrolysis system exhibits a lower cell voltage of 0.36 V at 10 mA cm-2 . Furthermore, the Faradaic efficiency of EG to GA is as high as 87%. The excellent performance of this new heterostructure arise from the charge redistribution and strain effects induced by Pt-Ir interactions between the heterogeneous interfaces, as well as the larger specific surface area and more active sites due to the metallene structure.

Electrocatalytic Valorization of Nitrate and Polyester Plastic for Simultaneous Production of Ammonia and Glycolic Acid.

Electrochemical upcycling of nitrate and polyester plastic into valuable products is an ideal solution to realize the resource utilization. Here, the co-production of ammonia (NH3) and glycolic acid (GA) via electrochemical upcycling of nitrate and polyethylene terephthalate (PET) plastics over mesoporous Pd3Au film on Ni foam (mPd3Au/NF), which is synthesized by micelle-assisted replacement method, is proposed. The mPd3Au/NF with well-developed mesoporous structure provides abundant active sites and facilitated transfer channels and strong electronic effect. As such, the mPd3Au/NF exhibits high Faraday efficiencies of 97.28% and 95.32% at 0.9 V for the formation of NH3 and GA, respectively. Theoretical results indicate that the synergistic effect of Pd and Au can optimize adsorption energy of key intermediates *NOH and *OCH2-CH2OH on active sites and increase bond energy of C─C band, thereby improving the activity and selectivity for the formation of NH3 and GA. This work proposes a promising strategy for the simultaneous conversation of nitrate and PET plastic into high-value NH3 and GA.

Dual Hydrogen Production System: Synergistic Effect of Ru and Ce Over Cu2O Nanotubes Drives Hydrogen Evolution and Formaldehyde Oxidation.

Water splitting for hydrogen production is limited by high cell voltage and low energy conversion efficiencies due to the slow kinetic process of the oxygen evolution reaction (OER). Here, an electrolytic system is constructed in which the cathode and anode co-release H2 at ultra-low input voltage using formaldehyde oxidation reaction (FOR) instead of OER. The prepared RuCe co-doped Cu2O nanotubes on copper foam (RuCe-Cu2O/CF) are used as electrode materials for the HER-FOR system. A current density of 0.8 A cm-2 is achieved at 0.55 V, and a stable hydrogen production process is realized at both the cathode and anode. Density functional theory (DFT) studies show that the synergistic effect of Ru and Ce drives: i) the d-band center of RuCe-Cu2O/CF away from the Fermi energy level; ii) the energy barrier for the C─H cracking of the H2C(OH)O* intermediate in FOR is lowered, which promotes the formation of H2 from H*, and iii) ΔGH* tends to 0 (-0.1 eV), optimizing the reaction kinetics of HER. This work provides a new design for an efficient catalyst for dual hydrogen production systems from water splitting.

Energy-Saving Ambient Electrosynthesis of Nylon-6 Precursor Coupled with Electrocatalytic Upcycling of Polyethylene Terephthalate.

Cyclohexanone oxime is an important intermediate in the chemical industry, especially for the manufacture of nylon-6. The traditional cyclohexanone oxime production strongly relies on cyclohexanone-hydroxylamine and cyclohexanone ammoxidation processes, which require harsh reaction conditions and consume considerable amounts of energy. Herein, direct electrosynthesis of cyclohexanone oxime is reported from environmental pollutants nitrite and cyclohexanone with almost 100% yield by using low-cost Cu2Se nanosheets as electrocatalysts. Combination of in situ Fourier transform infrared spectroscopy and theoretical calculations verifies that the p-d orbital hybridization between Cu and Se elements could synergistically optimize the surface electronic structure and enable improved adsorption and formation of the key active N intermediate NH2OH*, thereby enhancing cyclohexanone/nitrite-to-cyclohexanone oxime conversion over the Cu2Se nanosheets. Based on these, an efficient asymmetric co-electrolysis system is further demonstrated by coupling cyclohexanone/nitrite-to-cyclohexanone oxime conversion with the upcycling of polyethylene terephthalate plastics, achieveing energy-saving simultaneously production of value-added products (cyclohexanone oxime and glycolic acid).

Overall Spontaneous Water Splitting for Calcium Bismuthate Ca(BiO2)2: Flexible-Electronic-Controlled Band Edge Position and Adsorption-Site-Modulated Bond Strength.

Eco-friendly photocatalysts for water splitting, highly efficient in oxygen/hydrogen evolution reactions, hold great promise for the storage of inexhaustible solar energy and address environmental challenges. However, current common photocatalysts rarely exhibit both H2 and O2 production performances unless some regulatory measures, such as strain engineering, are implemented. Additionally, the extensive utilization of flexible electronics remains constrained by their high Young's modulus. Herein, on the basis of density functional theory calculations, we identify a novel spontaneous oxygen-producing two-dimensional Ca(BiO2)2 material, which can efficiently regulate the electronic structures of the surface active sites, optimize the reaction pathways, reduce the reaction energy barriers, and boost the overall water-splitting activity through biaxial strain modulation. In detail, an unstrained Ca(BiO2)2 monolayer not only possesses a suitable band gap value (2.02 eV) to fulfill the photocatalytic water-splitting band edge relationships but also holds favorable transport properties, excellent optical absorption across the visible light spectrum, and spontaneous oxygen production under neutral conditions. More excitingly, under application of a 7% biaxial tensile strain modulation with an ideal biaxial strength of 32.35 GPa nm, the Ca(BiO2)2 monolayer not only maintains its structural integrity but also exhibits a completely spontaneous reaction for photocatalytic hydrogen precipitation with superior optical absorption. This can primarily be attributed to the substantial reduction of the potential barrier through strain engineering as well as the weakening of bond energy resulting from changes of the adsorption site as calculated by crystal orbital Hamiltonian population analysis. This flexible stretchable electronic modulated the photocatalyst behavior and bond energy of O-Bi and O-Ca interactions, offering outstanding potential for photocatalytic water spontaneous oxygen and hydrogen evolution among all of the reported metal oxides, and is more likely to become a promising candidate for future flexible electronic devices.

UCHL-3 as a potential biomarker of ovarian cancer.

OBJECTIVE: This study explored promising prognostic and immune therapeutic candidate biomarkers for OC and determined the expression, prognostic value, and immune effects of UCHL3. METHODS: UCHL3 expression and clinical data were investigated using bioinformatic analysis. CCK8 and transwell assays were conducted to evaluate the impact of UCHL3 on proliferation and migration, and the effects of UCHL3 were further validated in a mouse model. Univariate and least absolute shrinkage and selection operator regression analyses were performed to construct a novel UCHL3-related prognostic risk model. Gene set enrichment analysis (GSEA) and immune analysis were performed to identify the significantly involved functions of UCHL3. Finally, bioinformatic analysis and immunohistochemistry were performed to explore the effect of UCHL3 on chemotherapy. RESULTS: UCHL3 expression was upregulated and associated with worse overall survival (OS) in OC. UCHL3 depletion repressed cell proliferation and migration both in vitro and in vivo. Furthermore, 237 genes were differentially expressed between the high and low UCHL3 expression groups. Subsequently, a UCHL3-related prognostic signature was built based on six prognostic genes (PI3, TFAP2B, MUC7, PSMA2, PIK3C2G, and NME1). Independent prognostic analysis suggested that age, tumor mutational burden, and RiskScore can be used as independent prognostic factors. The immune infiltration analysis and GSEA suggested that UCHL3 expression was related to the immune response. In addition, UCHL3 expression was higher in platinum-resistant OC patients than in platinum-sensitive patients. UCHL3 overexpression was associated with poorer OS. CONCLUSION: UCHL3 overexpression contributes to aggressive progression, poor survival, and chemoresistance in OC. Therefore, UCHL3 may be a candidate prognostic biomarker and potential target for controlling progression and platinum resistance in OC.

Interstitial Boron-Modulated Porous Pd Nanotubes for Ammonia Electrosynthesis.

Electrochemical conversion of nitrogen into ammonia at ambient conditions as a sustainable approach has gained significant attention, but it is still extremely challenging to simultaneously obtain a high faradaic efficiency (FE) and NH3 yield. In this work, the interstitial boron-doped porous Pd nanotubes (B-Pd PNTs) are constructed by combining the self-template reduction method with boron doping. Benefiting from distinctive one-dimensional porous nanotube architectonics and the incorporation of the interstitial B atoms, the resulting B-Pd PNTs exhibit high NH3 yield (18.36 µg h-1 mgcat.-1) and FE (21.95%) in neutral conditions, outperforming the Pd/PdO PNTs (10.4 µg h-1 mgcat.-1 and 8.47%). The present study provides an attractive method to enhance the efficiency of the electroreduction of nitrogen into ammonia by incorporating interstitial boron into porous Pd-based catalysts.

Boron-intercalation-triggered crystalline transition of Pd nanosheet assemblies for an enhanced oxygen reduction reaction.

The development of effective and stable cathode electrocatalysts is highly desired for fuel cells. Controlling the composition and morphology of Pd-based materials can provide a great opportunity to improve their oxygen reduction reaction (ORR) performance. Here, we report the synthesis of hexagonal close-packed (hcp) Pd2B nanosheet assemblies (Pd2B NAs) via the boronation reaction between as-synthesized Pd NAs and N,N-dimethylformamide. The hcp Pd2B NAs with uniform pore distribution can provide sufficient active sites for ORRs. The insertion of B atoms can induce the phase transition from face-centered cubic structure to hcp structure, as the most thermodynamically stable phase in the Pd-B alloy, which is beneficial for enhancing the ORR stability and toxicity resistance. Therefore, the hcp Pd2B NAs exhibit superior mass activity, specific activity and excellent stability for ORR. The present strategy of boron-intercalation-triggered crystalline transition of Pd-based nanomaterials is valuable for the design of metal-nonmetal catalysts with enhanced performance.

Amorphous/crystalline RhFeP metallene for hydrazine-assisted water splitting.

Replacing the slow oxygen evolution reaction with favorable hydrazine oxidation reaction (HzOR) is a green and efficient way to produce hydrogen. In this work, we synthesize amorphous/crystalline RhFeP metallene via phase engineering and heteroatom doping. RhFeP metallene has good catalytic activity and stability for HER and HzOR, and only an ultralow voltage of 18 mV is required to achieve 10 mA cm-2in a two-electrode hydrazine-assisted water splitting system. The superior result is mainly ascribed to the co-doping of Fe and P and the formation of amorphous/crystalline RhFeP metallene with abundant phase boundaries, thereby adjusting electronic structure and increasing active sites.

A loss-of-function variant in ZCWPW1 causes human male infertility with sperm head defect and high DNA fragmentation.

BACKGROUND: Male infertility is a global health issue. The more causative genes related to human male infertility should be further explored. The essential role of Zcwpw1 in male mouse fertility has been established and the role of ZCWPW1 in human reproduction needs further investigation to verify. METHODS: An infertile man with oligoasthenoteratozoospermia phenotype and his parents were recruited from West China Second University Hospital, Sichuan University. A total of 200 healthy Han Chinese volunteers without any evidence of infertility were recruited as normal controls, while an additional 150 infertile individuals were included to assess the prevalence of ZCWPW1 variants in a sporadic male sterile population. The causative gene variant was identified by Whole-exome sequencing and Sanger sequencing. The phenotype of the oligoasthenoteratozoospermia was determined by Papanicolaou staining, immunofluorescence staining and electron microscope. In-vitro experiments, western blot and in-silicon analysis were applied to assess the pathogenicity of the identified variant. Additionally, we examined the influence of the variant on the DNA fragmentation and DNA repair capability by Sperm Chromatin Dispersion and Neutral Comet Assay. RESULTS: The proband exhibits a phenotype of oligoasthenoteratozoospermia, his spermatozoa show head defects by semen examination, Papanicolaou staining and electron microscope assays. Whole-exome sequencing and Sanger sequencing found the proband carries a homozygous ZCWPW1 variant (c.1064C > T, p. P355L). Immunofluorescence analysis shows a significant decrease in ZCWPW1 expression in the proband's sperm. By exogenous expression with ZCWPW1 mutant plasmid in vitro, the obvious declined expression of ZCWPW1 with the mutation is validated in HEK293T. After being treated by hydroxyurea, MUT-ZCWPW1 transfected cells and empty vector transfected cells have a higher level of γ-H2AX, increased tail DNA and reduced H3K9ac level than WT-ZCWPW1 transfected cells. Furthermore, the Sperm Chromatin Dispersion assay revealed the proband's spermatozoa have high DNA fragmentation. CONCLUSIONS: It is the first report that a novel homozygous missense mutation in ZCWPW1 caused human male infertility with sperm head defects and high DNA fragmentation. This finding enriches the gene variant spectrum and etiology of oligoasthenoteratozoospermia.

Modulating Hydrogen Adsorption by Unconventional p-d Orbital Hybridization over Porous High-Entropy Alloy Metallene for Efficient Electrosynthesis of Nylon-6 Precursor.

Renewable electricity driven electrosynthesis of cyclohexanone oxime (C6H11NO) from cyclohexanone (C6H10O) and nitrogen oxide (NOx) is a promising alternative to traditional environment-unfriendly industrial technologies for green synthesis of C6H11NO. Precisely controlling the reaction pathway of the C6H10O/NOx-involved electrochemical reductive coupling reaction is crucial for selectively producing C6H11NO, which is yet still challenging. Herein, we report a porous high-entropy alloy PdCuAgBiIn metallene (HEA-PdCuAgBiInene) to boost the electrosynthesis of C6H11NO from C6H10O and nitrite, achieving a high Faradaic efficiency (47.6 %) and almost 100 % yield under ambient conditions. In situ Fourier transform infrared spectroscopy and theoretical calculations demonstrate that unconventional orbital hybridization between d-block metals and p-block metals could regulate the local electronic structure of active sites and induce electron localization of electron-rich Pd sites, which tunes the active hydrogen supply, facilitates the generation and enrichment of key intermediates NH2OH* and C6H10O*, and efficiently promotes their C-N coupling to selectively produce C6H11NO.

Interface Engineering and Boron Modification of Pd-B/Pd Hetero-Metallene Synergistically Accelerate Oxygen Reduction Catalysis.

2D metallene possess high surface area and excellent electron transport capability, thus enabling efficient application in oxygen reduction reaction (ORR). However, the interface regulation and electronic structure optimization of metallene are still great challenges. Herein, Pd-B/Pd hetero-metallene is constructed by interface engineering and B modification strategies for efficient electrocatalytic ORR. The 2D configuration of Pd-B/Pd hetero-metallene exposes a large number of surface atoms and unsaturated defect sites, thus providing abundant catalytic active sites and exhibiting high electron mobility. More importantly, interface engineering and B modification synergistically optimizing the electronic configuration of the metallene system. This work not only provides an effective strategy for the rational regulation of the electronic configuration of metallene, but also offers a reference for the construction of efficient ORR catalysts.

A General Synthesis of Crystal Phase Controllable Aerogels for Efficient Hydrogen Evolution.

Amorphous/crystalline (a/c) hetero-phase structures are considered as a class of efficient electrocatalysts for hydrogen evolution reaction (HER), but it remains a substantial challenge to obtain the specific phase by phase-selective synthesis. In this work, a general route for the preparation of various heterogeneous aerogels (RuB, PtB, PdB, and RhB) consisting of amorphous and crystalline phases is presented through a controlled NaBH4 reduction method. The prepared a/c-RuB aerogel exhibits better HER performance due to their desirable compositional and structural advantages such as more exposed active sites, optimized electronic structure, and interfacial synergistic effects. It requires only a low overpotential of 39 mV to reach a density of 10 mA cm-2 and also exhibits excellent stability. This work provides a new phase-selective synthesis strategy for the design and development of advanced hetero-phase electrocatalysts.

Engineering Under-Coordinated Active Sites with Tailored Chemical Microenvironments over Mosaic Bismuth Nanosheets for Selective CO2 Electroreduction to Formate.

Selective electrochemical reduction of CO2 into fuels or chemical feedstocks is a promising avenue to achieve carbon-neutral goal, but its development is severely limited by the lack of highly efficient electrocatalysts. Herein, cation-exchange strategy is combined with electrochemical self-reconstruction strategy to successfully develop diethylenetriamine-functionalized mosaic Bi nanosheets (mBi-DETA NSs) for selective electrocatalytic CO2 reduction to formate, delivering a superior formate Faradaic efficiency of 96.87% at a low potential of -0.8 VRHE . Mosaic nanosheet morphology of Bi can sufficiently expose the under-coordinated Bi active sites and promote the activation of CO2 molecules to form the OCHO- * intermediate. Moreover, in situ attenuated total reflectance infrared spectra further corroborate that surface chemical microenvironment modulation of mosaic Bi nanosheets via DETA functionalization can improve CO2 adsorption on the catalyst surface and stabilize the key intermediate (OCHO- *) due to the presence of amine groups, thus facilitate the CO2 -to-HCOO- reaction kinetics and promote formate formation.

Selective CO2 Electroreduction to Formate on Polypyrrole-Modified Oxygen Vacancy-Rich Bi2 O3 Nanosheet Precatalysts by Local Microenvironment Modulation.

Challenges remain in the development of highly efficient catalysts for selective electrochemical transformation of carbon dioxide (CO2 ) to high-valued hydrocarbons. In this study, oxygen vacancy-rich Bi2 O3 nanosheets coated with polypyrrole (Bi2 O3 @PPy NSs) are designed and synthesized, as precatalysts for selective electrocatalytic CO2 reduction to formate. Systematic material characterization demonstrated that Bi2 O3 @PPy precatalyst can evolve intoBi2 O2 CO3 @PPy nanosheets with rich oxygen vacancies (Bi2 O2 CO3 @PPy NSs) via electrolyte-mediated conversion and function as the real active catalyst for CO2 reduction reaction electrocatalysis. Coating catalyst with a PPy shell can modulate the interfacial microenvironment of active sites, which work in coordination with rich oxygen vacancies in Bi2 O2 CO3 and efficiently mediate directional selective CO2 reduction toward formate formation. With the fine-tuning of interfacial microenvironment, the optimized Bi2 O3 @PPy-2 NSs derived Bi2 O2 CO3 @PPy-2 NSs exhibit a maximum Faradaic efficiency of 95.8% at -0.8 V (versus. reversible hydrogen electrode) for formate production. This work might shed some light on designing advanced catalysts toward selective electrocatalytic CO2 reduction through local microenvironment engineering.

Defect-Rich PdIr Bimetallene Nanoribbons with Interatomic Charge Localization for Isopropanol-Assisted Seawater Splitting.

Metallene with outstanding physicochemical properties is an efficient two-dimensional electrocatalysts for sustainable hydrogen (H2 ) production applications. However, the controllable fabrication of extended atomically thin metallene nanoribbons remains a formidable challenge. Herein, this work proposes a controllable preparation strategy for atomically thin defect-rich PdIr bimetallene nanoribbons (PdIr BNRs) with a thickness of only 1.5 nm for the efficient and stable isopropanol-assisted seawater electrolytic H2 production. When using PdIr BNRs as catalyst to build an isopropanol-assisted seawater electrolysis system, a voltage of only 0.38 V is required at @10 mA cm-2 to achieve energy-saving H2 production, while producing high value-added acetone at the anode. The aberration-corrected high-resolution transmission electron microscopy (HRTEM) clearly reveals that the PdIr BNRs possess abundant structural defects, which can additionally serve as highly catalytically active sites. Density functional theory (DFT) calculations combined with X-ray absorption spectroscopy studies reveal that the introduction of Ir atoms can induce the formation of a localized charge region and shift the d-band center of Pd down, thereby reducing the adsorption energy on the catalyst in favor of the rapid desorption of H2 . This work opens the way for the controllable design and construction of defect-rich atomically thin metallene nanoribbons for efficient electrocatalytic applications.

Sulfur-Induced Low Crystallization of Ultrathin Pd Nanosheet Arrays for Sulfur Ion Degradation-Assisted Energy-Efficient H2 Production.

The utilization of thermodynamically favorable sulfur oxidation reaction (SOR) as an alternative to sluggish oxygen evolution reaction is a promising technology for low-energy H2 production while degrading the sulfur source from wastewater. Herein, amorphous/crystalline S-doped Pd nanosheet arrays on nickel foam (a/c S-Pd NSA/NF) is prepared by S-doping crystalline Pd NSA/NF.  Owing to the ultrathin amorphous nanosheet structure and the incorporation of S atoms, the a/c S-Pd NSA/NF provides a large number of active sitesand the optimized electronic structure, while exhibiting outstanding electrocatalytic activity in hydrogen evolution reaction (HER) and SOR. Therefore, the coupling system consisting of SOR-assisted HER can reach a current density of 100 mA cm-2 at 0.642 V lower than conventional electrolytic water by 1.257 V, greatly reducing energy consumption. In addition, a/c S-Pd NSA/NF can generate H2 over a long period of time while degrading S2- in water to the value-added sulfur powder, thus further reducing the cost of H2 production. This work proposes an attractive strategy for the construction of an advanced electrocatalyst for H2 production and utilization of toxic sulfide wastewater by combining S-doping induced partial amorphization and ultrathin metal nanosheet arrays.

Neurodevelopmental effects of maternal folic acid supplementation: a systematic review and meta-analysis.

Folic acid, a water-soluble vitamin B nutrient, plays an important role not only in maintaining a healthy pregnancy but also in offspring brain development and function, however, it remains unclear whether maternal folic acid (FA) supplementation associated with the risk of different postnatal neurodevelopmental outcomes. Here, we performed a systematic review and meta-analysis on the impact of maternal FA supplementation on a wide range of postnatal neurodevelopmental outcomes which include intellectual development, risk of autistic traits, ADHD, behavior, language, and psychomotor problems, using studies extracted from the following databases, including MEDLINE, Web of Science, Cochrane Library, Scopus, EMBASE, and PsychInfo. Thirty-two cohort studies and seven case-control studies were included in this meta-analysis. In the present study, we found that prenatal FA supplementation had a positive impact on offspring's neurodevelopmental outcomes, including improved intellectual development and reduced risk of autism traits, ADHD, behavioral, and language problems. We also found that FA over-supplementation was not associated with an improvement in offspring's brain development, and may have a negative impact on offspring's neurodevelopmental outcomes. This study proved the first panoramic review on the relationship of FA supplementation with offspring's neurodevelopment. Further studies focusing on different dosages and periods of FA supplementation are needed.Supplemental data for this article is available online at https://doi.org/10.1080/10408398.2021.1993781 .

B-Doping-Induced Lattice Expansion of Pd Metallene Nanoribbons for Oxygen Reduction Reaction.

Pd-based metallene is regarded as an efficient catalyst in the field of oxygen reduction reaction (ORR) because of its fantastic physicochemical features. The morphological structure control, lattice strain engineering, and electronic structure modulation of Pd-based metallene are effective tactics to enhance its electrocatalytic performance. In this work, we fabricate atomically thin B-doped Pd metallene nanoribbons (B-Pd MNRs) for efficient alkaline ORR. The atomically thin nanoribbon structure of B-Pd MNRs can expose many surface atoms as catalytically active sites. Moreover, the incorporation of boron effectively induces the lattice expansion and modulates the electronic structure of Pd, which can synergistically weaken the adsorption of intermediate species on B-Pd MNRs. Therefore, the B-Pd MNRs display excellent activity and durability for ORR. This work opens an avenue to the synthesis of atomically thin heteroatom-doped metallene nanoribbons for energy electrocatalytic applications.

Polyethylenimine-Ethylenediamine-Induced Pd Metallene toward Alkaline Oxygen Reduction.

Designing two-dimensional (2D) materials functionalized with organic molecules is an effective tactic to enhance catalytic performances for the oxygen reduction reaction (ORR). Herein, we synthesize Pd metallene with in situ modification of polyethylenimine-ethylenediamine (Pd@PEI-EDA metallene), in which PEI-EDA serves as both the structure-directing agent and modifier. Pd@PEI-EDA metallene has ample active sites and tuneable electronic structures due to ultrathin nanosheets with abundant wrinkles and interfacial structure. In contrast with commercial Pd/C and Pt/C, Pd@PEI-EDA metallene displays preferable catalytic ORR performance under alkaline conditions. This work offers an in situ interface engineering tactic for the preparation of 2D polymer-metal electrocatalysts to boost the ORR performance.