Unveiling the Intrinsic Photophysics in Quasi-Two-Dimensional Perovskites.

The two-dimensional (2D) perovskites have drawn intensive attention due to their unique stability and outstanding optoelectronic properties. However, the debate surrounding the spatial phase distribution and band alignment among different 2D phases in the quasi-2D perovskite has created complexities in understanding the carrier dynamics, hindering material and device development. In this study, we employed highly sensitive transient absorption spectroscopy to investigate the carrier dynamics of (BA)2(MA)n-1PbnI3n+1 quasi-2D Ruddlesden-Popper perovskite thin films, nominally prepared as n = 4. We observed the carrier-density-dependent electron and hole transfer dynamics between the 2D and three-dimensional (3D) phases. Under a low carrier density within the linear response range, we successfully resolved three ultrafast processes of both electron and hole transfers, spanning from hundreds of femtoseconds to several picoseconds, tens to hundreds of picoseconds, and hundreds of picoseconds to several nanoseconds, which can be attributed to lateral-epitaxial, partial-epitaxial, and disordered-interface heterostructures between 2D and 3D phases. By considering the interplay among the phase structure, band alignment, and carrier dynamics, we have proposed material synthesis strategies aimed at enhancing the carrier transport. Our results not only provide deep insights into an accurate intrinsic photophysics of quasi-2D perovskites but also inspire advancements in the practical application of these materials.

Spiribacter salilacus sp. nov., a novel moderately halophilic bacterium isolated from a saline lake in China.

A Gram-staining-negative, non-motile, rod-shaped or curved rod-shaped, moderately halophilic bacterium, designated C176T, was isolated from Yuncheng Salt Lake in Shanxi Province, P.R. China. The optimal temperature, salinity and pH for growth of strain C176T was 37 °C, 6% (w/v) NaCl and 7.5. Phylogenetic analysis using 16S rRNA gene sequences indicated strain C176T has the highest similarity with Spiribacter salinus LMG 27464 T (97.7%), following by the S. halobius E85T (97.6%), S. curvatus DSM 28542 T (97.2%), S. roseus CECT 9117 T (97.0%) and S. vilamensis DSM 21056 T (96.9%). The ANI and dDDH values between strain C176T and S. salinus LMG 27464 T were 69.8 and 17.7%, respectively. The DNA G + C content of genome for strain C176T was 54.1%. Summed feature 8 (C18:1 ω7c and/or C18:1 ω6c) and C16:0 were detected as its major fatty acids, with content of 38.7 and 28.6% respectively, while Q-8 was the predominant ubiquinone. The major polar lipids of strain C176T contained phospholipid, phosphatidylglycerol and phosphoglycolipid. In accordance with results of polyphasic taxonomy, strain C176T is considered as a novel species of the genus Spiribacter, for which the name Spiribacter salilacus sp. nov. is proposed. The type strain is C176T (= MCCC 1H00417T = KCTC 72692 T).

Wenzhouxiangella limi sp. nov., isolated from a salt lake.

A novel Gram-stain-negative, strictly aerobic, gliding and rod-shaped bacterial strain, designated strain C33T, was isolated from Yuncheng Salt Lake, Shanxi, PR China. Strain C33T grows optimally at 37 °C, pH 7.5 and 5.0 % (w/v) NaCl. Cells of strain C33T are 0.3-0.5 µm wide and 1.0-2.0 µm long, catalase-positive and oxidase-positive. The major cellular fatty acids are iso-C15 : 0 and iso-C16 : 0. The sole respiratory quinone is Q-8. The major polar lipids include phosphatidylethanolamine, diphosphatidylglycerol, phosphatidylglycerol, one unidentified aminophospholipid, one unidentified glycolipid and four unidentified lipids. The results of phylogenetic analysis based on 16S rRNA gene sequences indicate that strain C33T has the highest similarities to Wenzhouxiangella marina KCTC 42284T (97.4 %), Wenzhouxiangella sediminis XDB06T (96.5 %) and 'Wenzhouxiangella salilacus' MCCC 1K03442T (95.2 %). The percentage of conserved proteins and average amino acid identity values between strain C33T and its close related species are higher than the threshold for dividing genera, the average nucleotide identity and digital DNA-DNA hybridization values are well below the threshold limits for species delineation. The genomic DNA G+C content is 63.7 mol%. Based on the results of phenotypic, chemotaxonomic and phylogenetic analyses, strain C33T is considered to represent a novel species of the genus Wenzhouxiangella, for which the name Wenzhouxiangella limi sp. nov. is proposed. The type strain is C33T (=MCCC 1H00413T=KCTC 72874T).

A colorimetric aptasensor for the highly sensitive detection of 8-hydroxy-2'-deoxyguanosine based on G-quadruplex-hemin DNAzyme.

A highly sensitive, low-cost colorimetric aptasensor was developed for the determination of 8-hydroxy-2'-deoxyguanosine (8-OHdG) in human urine. The method is based on a conformational switching of the 8-OHdG aptamer to form a G-quadruplex structure in the presence of 8-OHdG. The resulting G-quadruplex assembles into a peroxidase-like DNAzyme with hemin, which effectively catalyzes the oxidation of 2,2'-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid) diammonium salt (ABTS(2-)) by H2O2 to ABTS(+), resulting in an increase in the absorption signal at 416nm along with a color change of the solution. The response signals linearly correlated with the concentration of 8-OHdG, ranging from 466pM to 247nM with a detection limit of 141pM. The relative standard deviation and the recovery were 1.97-3.47% (n=11) and 98.8-100.2%, respectively. The proposed method avoids the label and derivatization steps in common methods and allows direct analysis of the samples by the naked eye without costly instruments, which is reliable, inexpensive, and sensitive.

Copper-catalyzed cyclization/aza-Claisen rearrangement cascade initiated by ketenimine formation: an efficient stereocontrolled synthesis of α-allyl cyclic amidines.

An efficient and convenient synthesis of α-allyl cyclic amidines has been achieved by applying a novel cascade reaction. Copper(I)-mediated in situ N-sulfonyl ketenimine formation from the reaction of a terminal alkyne with sulfonyl azide is followed by an intramolecular nucleophilic attack on the central carbon atom by an allylic tertiary amine, and then an aza-Claisen rearrangement takes place through a chair transition state to furnish the titled amidines with complete stereocontrol.

GRACE: Unveiling Gene Regulatory Networks With Causal Mechanistic Graph Neural Networks in Single-Cell RNA-Sequencing Data.

Reconstructing gene regulatory networks (GRNs) using single-cell RNA sequencing (scRNA-seq) data holds great promise for unraveling cellular fate development and heterogeneity. While numerous machine-learning methods have been proposed to infer GRNs from scRNA-seq gene expression data, many of them operate solely in a statistical or black box manner, limiting their capacity for making causal inferences between genes. In this study, we introduce GRN inference with Accuracy and Causal Explanation (GRACE), a novel graph-based causal autoencoder framework that combines a structural causal model (SCM) with graph neural networks (GNNs) to enable GRN inference and gene causal reasoning from scRNA-seq data. By explicitly modeling causal relationships between genes, GRACE facilitates the learning of regulatory context and gene embeddings. With the learned gene signals, our model successfully decoding the causal structures and alleviates the accurate determination of multiple attributes of gene regulation that is important to determine the regulatory levels. Through extensive evaluations on seven benchmarks, we demonstrate that GRACE outperforms 14 state-of-the-art GRN inference methods, with the incorporation of causal mechanisms significantly enhancing the accuracy of GRN and gene causality inference. Furthermore, the application to human peripheral blood mononuclear cell (PBMC) samples reveals cell type-specific regulators in monocyte phagocytosis and immune regulation, validated through network analysis and functional enrichment analysis.

Colorimetric detection of metallothioneins using a thymine-rich oligonucleotide-Hg complex and gold nanoparticles.

A simple and sensitive method for label-free, colorimetric detection of metallothioneins (MTs) has been developed by using a thymine (T)-rich oligonucleotide (TRO)-Hg-AuNP system. In this colorimetric strategy, the thiol groups of MTs could interact with mercury from the T-Hg(2+)-T complex to release TRO, resulting in a color change of the system. The response signals linearly correlated with the concentration of MTs over the range of 2.56 × 10(-8) to 3.08 × 10(-7) mol L(-1), and the limit of detection was 7.67 × 10(-9) mol L(-1). The relative standard deviation and the recovery were 2.3-4.8% (n = 11) and 94.2-103.9%, respectively. The proposed method avoids the label and derivatization steps in common methods, allows direct analysis of the samples by the naked eye without costly instruments, and is reliable, inexpensive, and sensitive.

Effect comparisons of different conditioners and microbial agents on the degradation of estrogens during dairy manure composting.

To investigate the degradation efficiency of conditioners and commercial microbial agents on estrogens (E1, 17α-E2, 17ß-E2, E3, EE2, and DES) in the composting process of dairy manure, seven different treatments (RHB-BF, OSP-BF, SD-BF, MR-BF, MR-FS, MR-EM, and MR-CK) under forced ventilation conditions were composted and monitored regularly for 30 days. The results indicated that the removal rates of estrogens in seven treatments ranged from 95.35% to 99.63%, meanwhile the degradation effect of the composting process on 17ß-Estradiol equivalent (EEQ) was evaluated, and the removal rate of ΣEEQ ranged from 96.42% to 99.72%. With the combined addition of rice husk biochar (RHB) or oyster shell powder (OSP) and bio-bacterial fertilizer starter cultures (BF), namely RHB-BF and OSP-BF obviously promoted the rapid degradation of estrogens. 17ß-E2 was completely degraded on the fifth day of composting in OSP-BF. Microbial agents have some promotional effect and enhances the microbial degradation of synthetic estrogen (EE2, DES). According to the results of RDA, pH and EC were the main environmental factors affecting on the composition and succession of estrogen-related degrading bacteria in composting system. As predominant estrogens-degrading genera, Acinetobacter, Bacillus, and Pseudomonas effected obviously on the change of estrogens contents. The research results provide a practical reference for effective composting of dairy manure to enhancing estrogens removal and decreasing ecological risk.

Regulating 3D Phase in Quasi-2D Perovskite Films for High-Performance and Stable Photodetectors.

The charge transport in quasi-2D perovskites limits their applications despite the superior stability and optoelectronic properties. Herein, a novel strategy is proposed to enhance the charge transport by regulating 3D perovskite phase in quasi-2D perovskite films. The carbohydrazide (CBH) as an additive is introduced into (PEA)2 MA3 Pb4 I13 precursors, which slows down the crystallization process and improves the phase ratio and crystal quality of the 3D phase. This structure change results in a significant improvement in charge transport and extraction, leading to the device demonstrating an almost 100% internal quantum efficiency, a peak responsivity of 0.41 A W-1 , and a detectivity of 1.31 × 1012 Jones at 570 nm under 0 V bias. Furthermore, the air and moisture stability of (PEA)2 MA3 Pb4 I13 films is not deteriorated but gets significantly improved due to the better crystal quality and the passivation of defects by the residual CBH molecule. This work demonstrates a strategy for improving the charge transport properties of quasi-2D perovskites and also sheds light on solving the stability issue of 3D perovskite films via the proper passivation or additives, which will inspire the fast development of the perovskite community.

Probing the Genuine Carrier Dynamics of Semiconducting Perovskites under Sunlight.

Understanding the nature of photogenerated carriers and their subsequent dynamics in semiconducting perovskites is important for the development of solar cell materials and devices. However, most ultrafast dynamic measurements on perovskite materials were conducted under high carrier densities, which likely obscures the genuine dynamics under low carrier densities in solar illumination conditions. In this study, we presented a detailed experimental study of the carrier density-dependent dynamics in hybrid lead iodide perovskites from femtosecond to microsecond using a highly sensitive transient absorption (TA) spectrometer. From the dynamic curves with low carrier density in the linear response range, we observed two fast trapping processes that occurred in less than 1 ps and tens of picoseconds, attributed to the shallow traps, and two slow decays with lifetimes of hundreds of nanoseconds and longer than 1 µs, related to the trap-assisted recombination and trapping at deep traps. Further TA measurements clearly show that PbCl2 passivation can effectively reduce both shallow and deep trap densities. These results provide insights into the intrinsic photophysics of semiconducting perovskites with direct implications for photovoltaic and optoelectronic applications under sunlight.

Highly sensitive and stable MEMS acetone sensors based on well-designed α-Fe2O3/C mesoporous nanorods.

Highly sensitive and stable acetone gas sensors based on MEMS substrate supported carbon nanoparticles decorated mesoporous α-Fe2O3 (C-d-mFe2O3) nanorods (NRs) derived from Fe-MIL-88B-NH2 NRs were first synthesized via a sequential process including a facile hydrothermal reaction and one-step pyrolysis at a moderate temperature in air. The MEMS architecture ensures low power consumption, small size, and high integration of the sensor. The obtained C-d-mFe2O3 NRs exhibit good thermal stability and superior acetone sensing performance with excellent response (Ra/Rg = 5.2 to 2.5 ppm) and selectivity, fast response/recovery speed (10/27 s), and low detection limit of 500 ppb at 225 °C. Furthermore, the acetone sensor exhibits remarkable long-term stability and repeatability even after being stored in air for over 10 months. The enhanced acetone sensing performance could be attributed to the large specific surface area of mesoporous α-Fe2O3 NRs, highly conductive carbon nanoparticles on the surface, and the formation of α-Fe2O3/C heterojunction. Density functional theory (DFT) calculations help to further confirm the superior acetone sensing performance. The competitive performance makes C-d-mFe2O3 NRs gas sensor a great potential for practical application in environmental harmful acetone gas monitoring.

A Fully Flexible Intelligent Thermal Touch Panel Based on Intrinsically Plastic Ag2 S Semiconductor.

Wearable touch panels, a typical flexible electronic device, can recognize and feed back the information of finger touch and movement. Excellent wearable touch panels are required to accurately and quickly monitor the signals of finger movement as well as the capacity of bearing various types of deformation. High-performance thermistor materials are one of the key functional components, but to date, a long-standing bottleneck is that inorganic semiconductors are typically brittle while the electrical properties of organic semiconductors are quite low. Herein, a high-performance flexible temperature sensor is reported by using plastic Ag2 S with ultrahigh temperature coefficient of resistance of -4.7% K-1 and resolution of 0.05 K, and rapid response/recovery time of 0.11/0.11 s. Moreover, the temperature sensor shows excellent durability without performance damage or loss during force stimuli tests. In addition, a fully flexible intelligent touch panel composed of a 16 × 10 Ag2 S-film-based temperature sensor array, as well as a flexible printed circuit board and a deep-learning algorithm is designed for perceiving finger touch signals in real-time, and intelligent feedback of Chinese characters and letters on an app. These results strongly show that high-performance flexible inorganic semiconductors can be widely used in flexible electronics.

The effect of ion environment changes on retention protein behavior during whey ultrafiltration process.

The factors affecting membrane fouling are very complex. In this study, the membrane fouling process was revealed from the perspective of ion environment changes, which affected the whey protein structure during ultrafiltration. It was found that the concentrations of Ca2+ and Na+ were overall increased and the concentrations of K+, Mg2+ and Zn2+ were decreased at an ultrafiltration time of 11 min, which made more hydrophilic groups buried inside and increased the content of α-helix, leading to more protein aggregation. The relatively higher K+ ratio in retention could lead to an antiparallel ß-sheet configuration, aspartic acid, glutamic acid and tryptophan increased, which resulted in more protein aggregation and deposition on the membrane surface at 17 min. When the ion concentration and ratio restored the balance and were close to the initial state in retention, the protein surface tension decreased, and the hydrophilic ability increased at 21-24 min.

[Inversion of the lake total nitrogen concentration by multiple regression kriging model based on hyperspectral data of HJ-1A].

The content of total nitrogen in the waters is an important index to measure lake water quality, and the technique of remote sensing plays a large role in quantitatively monitoring the dynamic change and timely grasping the status of lake pollution. Taking Chaohu as an example, quantitative inversion models of total nitrogen were established by multivariable regression Kriging under analyzing of an correlation between total nitrogen and chlorophyll-a or suspended solids by HIS hyperspectral remote sensing data of HJ-1A satellite. The result shows that the correlation of 0.76 was discovered between total nitrogen and the multiple combination with band 72, band 79 and band 97, while the correlation could be increased to 0.83 by applying combined model of multiple linear regression and ordinary Kriging. The optimization of the residuals of the conventional regression model can improve the accuracy of the inversion effectively. These results also provide useful exploration for further establishing a common model of quantitative inversion of lake total nitrogen concentration.

Recent Progress on Intercalation-Based Anode Materials for Low-Cost Sodium-Ion Batteries.

Intercalation-based anode materials can be considered as the most promising anode candidates for large-scale sodium-ion batteries (SIBs), owing to their long-term cycling stability and environmental friendliness, as well as their natural abundance. Nevertheless, their low energy density, low initial coulombic efficiency, and poor cycling lifespan, as well as sluggish sodium diffusion dynamics are still the main issues for the application of intercalation-based anode materials in SIBs in terms of meeting the benchmark requirements for commercialization. Over the past few years, tremendous efforts have been devoted to improving the performance of SIBs. In this Review, recent progress in the development of intercalation-based anode materials, including TiO2 , Li4 Ti5 O12 , Na2 Ti3 O7 , and NaTi2 (PO4 )3 , is summarized in terms of their sodium storage performance, critical issues, sodiation/desodiation behavior, and effective strategies to enhance their electrochemical performance. Additionally, challenges and perspectives are provided to further understand these intercalation-based anode materials.

Hollow MXene Sphere-Based Flexible E-Skin for Multiplex Tactile Detection.

Skin-like electronics that can provide comprehensively tactile sensing is required for applications such as soft robotics, health monitoring, medical treatment, and human-machine interfaces. In particular, the capacity to monitor the contact parameters such as the magnitude, direction, and contact location of external forces is crucial for skin-like tactile sensing devices. Herein, a flexible electronic skin which can measure and discriminate the contact parameters in real time is designed. It is fabricated by integrating the three-dimensional (3D) hollow MXene spheres/Ag NW hybrid nanocomposite-based embedded stretchable electrodes and T-ZnOw/PDMS film-based capacitive pressure sensors. To the best of our knowledge, it is the first stretchable electrode to utilize the 3D hollow MXene spheres with the essential characteristic, which can effectively avoid the drawbacks of stress concentration and shedding of the conductive layer. The strain-resistance module and the pressure-capacitance module show the excellent sensing performance in stability and response time, respectively. Moreover, a 6 × 6 sensor array is used as a demonstration to prove that it can realize the multiplex detection of random external force stimuli without mutual interference, illustrating its potential applications in biomimetic soft wearable devices, object recognition, and robotic manipulation.

Spider Web-like Flexible Tactile Sensor for Pressure-Strain Simultaneous Detection.

Multiparameter integrated sensors are required for the next generation of flexible wearable electronics. However, mutual interference between detected signals is a technical bottleneck for a flexible tactile sensor to realize pressure-strain monitoring simultaneously and sensitively. Herein, a flexible dual-parameter pressure-strain sensor based on the three-dimensional (3D) tubular graphene sponge (TGS) and spider web-like stretchable electrodes is designed and fabricated. As the pressure-sensitive module, the unique 3D-TGS with an uninterrupted network of tubular graphene and high graphitic degree demonstrates great robust compressibility, supporting compression to ∼20% without shape collapse. The spider web-like stretchable electrodes as the strain-sensitive module are fabricated by a spray-embedded process based on the hierarchical multiscale hybrid nanocomposite of Ag nanowires (NWs) and carbon nanotubes (CNTs) with an optimal mass ratio. By comparing the output signals of spider web-like flexible electrodes, the magnitude and direction of the applied force can be effectively monitored simultaneously. Moreover, the potential applications of the flexible dual-parameter pressure-strain device in human-machine interaction are also explored, showing great promise in artificial intelligence and wearable systems.

Ultrahigh-Sensitive Finlike Double-Sided E-Skin for Force Direction Detection.

Flexible pressure sensing is required for the excellent sensing performance and dexterous manipulation of the measured objects in their potential applications. Particularly, the ability to measure and discriminate the direction of force, contact surface, and contact location in real time is crucial for robotics with tactile feedback. Herein, a three-dimensional elastic porous carbon nanotube (CNT) sponge is synthesized by chemical vapor deposition, which is successfully applied in the piezoresistive sensor. In situ scanning electron microscopy study intuitively illustrates the characteristics that the microfibers of the CNT sponge distort and contact with each other under an external force. As a result, new conductive paths are created at the contact points between the CNT microfibers, which provides a basic sensing principle for a piezoresistive sensor. The CNT sponge-based sensor has an ultrahigh sensitivity in a wide pressure range (0-4 kPa for 4015.8 kPa-1), a rapid response time of 120 ms, and excellent durability over 5000 cycles. Moreover, a finlike flexible double-sided electronic skin (e-skin) is fabricated by a simple method to achieve force direction detection, which has potential applications in intelligent wearable devices and human-machine interaction.

[Determination of nerolidol in volatile oil of Dalbergia odorifera by GC].

OBJECTIVE: To develop a method for determination of nerolidol in the volatile oil of Dalbergia odorifera. METHOD: GC method was used. The samples were separated on Agilent HP-5 column (320 microm x 30 m, 0.25 microm) with the mobile phase of highly pure N2. Flow rate was 2 mL x min(-1). RESULT: Linearity of nemlidol was good linearity in the range of 0.059-1.97 mg x mL(-1), and the average recovery was 97.5%, RSD 2.3%. CONCLUSION: This method is simple, accurate, rapid and reproducible.

Fluorescence quenching determination of metallothioneins using 8-hydroxyquinoline-5-sulphonic acid-Cd(II) chelate.

A novel method for the determination of metallothioneins (MTs) in urine was developed by fluorescence quenching strategy. The response signals linearly correlated with the concentration of MTs in the ranges of 3.12×10(-8)-1.23×10(-6) mol L(-1), and the limit of detection (LOD) was 9.36×10(-9) mol L(-1). The proposed method avoids the label and derivatization steps in common methods, and is reliable, inexpensive and sensitive. Furthermore, the interaction of MTs and 8-hydroxyquinoline-5-sulphonic acid (HQS)-Cd(II) chelate was investigated, and a static quenching mode was proposed to be primarily responsible for the fluorescence quenching event. It could provide a promising potential for the detection of the biomacromolecules which have no native fluorescence, and be benefit to extend the application of fluorescence strategy.