Percutaneous reduction and cannulated screw fixation assisted by 3D printing technology of calcaneal fractures in children.

BACKGROUND: Percutaneous reduction and cannulated screw fixation (PR + CSF) for treatment of calcaneal fractures in pediatric patients has been proven to achieve satisfactory outcomes with few complications. But it is also a difficult technology due to the limited exposure and surgeons are unable to reduce articular surface under direct vision. The purpose of this study was to analyze the outcomes of applying 3D printing technology to preoperative preparation and Intraoperative operating for the treatment of calcaneal fractures in children. METHODS: Pediatric patients with calcaneal fractures from January 2010 to December 2018 were reviewed during study period. Preoperative radiographs and computed tomography scans were collected to classify the fractures, reconstruct 3D printed model and evaluate postoperative outcomes. The blood loss, operative time, number of fluoroscopies, surgeon and patient satisfaction were used to assess the effectiveness, feasibility and safety of 3D printing technology. Functional results were measured by American Orthopedic Foot and Ankle Society (AOFAS) hindfoot score. RESULT: 12 patients (10 boys and 2 girls) with 17 fractures were involved in our study. There were significant differences in the average Böhler angle before operation compared with that after operation and at last follow-up (P < 0.001). Similarly, the calcaneal height and length postoperatively and at the end of follow-up time were proved to have significant difference (P < 0.05) compared to preoperative. CT scan showed good reduction of the posterior facet according to Goldzak index. The average subjective AOFAS hindfoot score was 94.1. Both patients and surgeon made sense of the 3D printed model that can help them getting more information about the factures and making preoperative plans. No wound complication was found in this study. CONCLUSION: This study indicated that percutaneous reduction and cannulated screw fixation (PR + CSF) assisted by 3D printing technology in the treatment of calcaneal fractures in pediatric patients achieve good outcomes, with specific preoperative preparation, satisfactory functional recovery and fewer complications. LEVEL OF EVIDENCE: III.

A nomogram for predicting skin necrosis risk after open reduction and internal fixation for tibia fractures.

The purpose of our study was to determine the risk factors for skin necrosis after open reduction and internal fixation (ORIF) for tibia fracture and establish a nomogram prediction model. We retrospectively analysed the clinical data of patients who suffered from tibia fractures and had been surgically treated by ORIF in our institution between August 2015 and October 2020. Perioperative information was obtained through the electronic medical record system, univariate and multivariate analyses were performed to determine the risk factors of skin necrosis, and a nomogram model was constructed to predict the risk of skin necrosis. The predictive performance and consistency of the model were evaluated by the Hosmer-Lemeshow (H-L) test and the calibration curve. In total, 444 patients were enrolled in our study. Multivariate analysis results showed that limb swelling, time until the operation, operation time, distance from fracture end to the skin, and soft-tissue injury (Tscherne classification type 3) were independent risk factors for skin necrosis. The AUC value for skin necrosis risk was 0.906 (95% confidence interval 0.88~0.94). The H-L test revealed that the nomogram prediction model had good calibration ability (P = .467). Finally, we found a correlation between skin necrosis and limb swelling, time until the operation, operation time, distance from fracture end to the skin, and soft-tissue injury (Tscherne classification type 3) after ORIF for tibia fracture patients. Our nomogram prediction model might be helpful for clinicians to identify high-risk patients, as interventions could be taken early to reduce the incidence of skin necrosis.

The efficacy of using 3D printing models in the treatment of fractures: a randomised clinical trial.

BACKGROUND: The aim of this study was to evaluate the efficacy of the use of three-dimensional (3D) printing models for preoperative planning in cases of complex fracture. METHODS: In total, 48 patients with AO type C fractures of the distal radius were enrolled in the study between January 2014 and January 2015. They were divided randomly into 3D model (n = 23) and routine treatment (n = 25) groups. A 3D digital model of each distal radius fracture in the former group was constructed. The model was exported to a 3D printer for construction of a full solid model. During each operation, the operative time, amount of blood loss, and frequency of intraoperative fluoroscopy were recorded, which were regarded as primary outcome measures. Patients were followed to evaluate surgical outcomes by Gartland-Werley scores, radiological evaluation, and range of motion of wrist, and these were regarded as the secondary outcome measures. In addition, we invited surgeons and patients to complete questionnaires. RESULTS: The treatment of complex fractures using the 3D printing approach reduced the frequency of intraoperative fluoroscopy, blood loss volume, and operative time, but did not improve postoperative function compared with routine treatment. The patients wanted the doctor to use the 3D model to describe the condition and introduce the operative plan because it facilitated their understanding. The orthopaedic surgeons thought that the 3D model was useful for communication with patients, but were much less satisfied with its use in preoperative planning. CONCLUSION: Our study revealed that 3D printing models effectively help the doctors plan and perform the operation and provide more effective communication between doctors and patients, but can not improve postoperative function compared with routine treatment. TRIAL REGISTRATION: This trial was registered at the Chinese Clinical Trial Registry on May 9, 2017 (ChiCTR-IRP-17011343, http://www.chictr.org.cn/showproj.aspx?proj=19264 ).

Surgical treatment of unstable pelvic fractures with concomitant acetabular fractures.

PURPOSE: To explore the diagnosis, treatment, and clinical prognosis of patients with both unstable pelvic fractures and concomitant acetabular fractures. MATERIAL AND METHODS: We retrospectively analyzed 21 cases of unstable pelvic fractures with concomitant acetabular fractures treated between January 2013 and December 2014. All 21 patients (18 males, 3 females), aged 43.5-55 years (range: 21-55 years), underwent surgery within four to 15 days (average = 6.5 days) after injury. We evaluated the pre-operative diagnoses, surgical approaches, types of fixation used, and prognoses. RESULTS: All 21 patients were followed-up for six to 18 months. The quality of post-operative pelvic fracture reduction (determined using the Matta scoring criteria) was excellent in five cases, good in 12, and fair in four. The clinical outcomes at the final follow-up (scored using the Majeed criteria) were excellent in ten cases, good in eight, and fair in three. The quality of post-operative acetabular fracture reduction (determined using the Matta scoring criteria) was excellent in five cases, good in 11, and poor in five. Hip joint function was evaluated at the final follow-up (using the D'Aubigné scoring system) and was excellent in eight cases, good in nine, and fair in four. The healing time was 12-18 weeks for pelvic fractures and 12-22 weeks for acetabular fractures. Post-operative wound infections in two patients were controlled after second operations featuring debridement and irrigation. We found no instance of heterotopic ossification, ischemic necrosis of the femoral head, or iatrogenic vascular or nerve injury. CONCLUSIONS: Good therapeutic outcomes in patients with unstable pelvic fractures and concomitant acetabular fractures can be achieved via accurate diagnosis, careful pre-operative planning, a well-performed operation, effective reduction and surgical fixation, and appropriate exercise to allow functional rehabilitation.

Comparison of traditional surgery and surgery assisted by three dimensional printing technology in the treatment of tibial plateau fractures.

PURPOSE: This study was conducted to compare traditional surgery and surgery assisted by 3D printing technology in the treatment of tibial plateau fractures. In addition, we also investigated the effect of 3D printing technology on the communication between doctors and patients. METHODS: Seventy two patients with tibial plateau fractures were enrolled in the study from April 2014 to October 2015. They were divided into two groups: 34 cases of 3D model group, 38 cases of traditional surgery group. The individual models were used to simulate the surgical procedures and carry out the surgery according to plan. Operation time, blood loss, and number of intra-operative fluoroscopy were recorded. Through the follow-up, the recovery of patients were observed. Besides, we designed questionnaires to verify the satisfaction for both surgeons and patients. RESULTS: The average operation time, average amount of blood loss, and number of intra-operative fluoroscopy for 3D model group was 85.2±0.9 minutes, 186.3± 5.5ml, 5.3± 0.2 times, and for traditional surgery group was 99.2±1.0 minutes, 216.2 ±6.9 ml,7.1 ± 0.2 times respectively. There was statistically significant difference between the traditional surgery group and 3D model group (P < 0.05). Via follow-up, we can see that the 3D printing group has a better clinical efficacy. The average score of the questionnaires to Patient and doctors were 7.3 ± 0.1 points and 8.5± 0.1 points respectively. CONCLUSION: This study suggested the clinical feasibility of 3D printing technology in treatment of tibial plateau fractures.

Comparison of Hybrid Fixation to Dual Plating for Both-Bone Forearm Fractures in Older Children.

When operative stabilization of forearm fractures in older children is necessary, the optimal method of fixation is controversial. This study compared the radiographic and functional outcomes of dual plating to a hybrid fixation construct with elastic intramedullary nailing of the radius and plate fixation of the ulna of forearm fractures in children aged between 10 and 16 years. Nineteen patients were treated using a hybrid fixation construct and 13 patients were treated with dual plating fixation. The 2 groups were compared retrospectively according to perioperative data and patient outcome measures. The hybrid fixation construct group had 19, with a mean age of 13.3 years (range, 10-16 years) and the dual plate group had 13 patients, with a mean age of 12.9 years (range, 10-16 years). Groups were similar for sex, arm injured, and fracture location. Duration of surgery and tourniquet use was significantly shorter in the hybrid fixation construct group. There was no significant difference in either time to union or Price scores for function evaluation between the 2 groups. Complication rates were also similar between groups, with 1 ulna delayed unions, 1 superficial infection at entry of nail in hybrid fixation construct group, and 1 ulna delayed unions in the dual plating group. Hybrid fixation, using open reduction and internal fixation with a plate-and-screw construct on the ulna and closed reduction and elastic intramedullary fixation of the ulna, is an acceptable method for treating both-bone diaphyseal forearm fractures in skeletally immature patients aged 10-16 years.

Comparison of intramedullary and extramedullary fixation of stable intertrochanteric fractures in the elderly: a prospective randomised controlled trial exploring hidden perioperative blood loss.

BACKGROUND: Hip fracture is a severe and common injury that occurs predominantly in the elderly. Blood loss in the perioperative period is associated with a greater risk of dying in anaemic patients. The aim of the study was to explore the best way to treat stable intertrochanteric fractures, taking hidden blood loss into account. METHODS: This prospective, randomised blinded study included patients aged over 65 years with stable intertrochanteric fractures (Evans grades I and II). The patients were allocated to one of two groups treated via extramedullary or intramedullary fixation. Patient data were retrieved from electronic charts. Functional recovery was evaluated using the Functional Recovery Score of Zuckerman. Postoperative complications were also recorded. The formula of Nadler and Gross was used to calculate blood loss. RESULTS: There were 92 patients in the extramedullary and 106 in the intramedullary group. Age, sex, the cause of injury, the type of fracture, the observed blood loss, functional recovery, time to union, complications, and American Society of Anesthesiologists classification did not differ significantly between the two groups (all p-values > 0.05). The frequencies of lung infection, electrolyte imbalance, and hypoproteinemia differed between groups (all p-values < 0.05). Total and hidden blood loss were higher in the intramedullary group (p = 0.001). CONCLUSION: Extramedullary (compared with intramedullary) fixation of stable intertrochanteric fractures significantly reduces perioperative blood loss but affords similar functional outcomes and times to union. In view of the morbidity and complications associated with acute anaemia and transfusions, extramedullary fixation may be the optimal choice for treatment of stable fractures, being associated with reduced blood loss. TRIAL REGISTRATION: The study was retrospectively registered at the Chinese Clinical Trial Registry, number: ChiCTR-INQ-16009754 , trial registration date: 6th Nov. 2016.

Comparison of percutaneous cannulated screw fixation and calcium sulfate cement grafting versus minimally invasive sinus tarsi approach and plate fixation for displaced intra-articular calcaneal fractures: a prospective randomized controlled trial.

BACKGROUND: The management of displaced intra-articular calcaneal fractures (DIACFs) remains challenging and controversial. A prospective randomized controlled trial was conducted to compare percutaneous reduction, cannulated screw fixation and calcium sulfate cement (PR+CSC) grafting with minimally invasive sinus tarsi approach and plate fixation (MISTA) for treatment of DIACFs. METHODS: Ultimately, 80 patients with a DIACFs were randomly allocated to receive either PR+CSC (N = 42) or MISTA (N = 38). Functional outcomes were evaluated using the American Orthopaedic Foot and Ankle Society (AOFAS) hindfoot scores. Radiological results were assessed using plain radiographs and computed tomography (CT) scans, and postoperative wound-related complications were also recorded. RESULTS: The average time from initial injury to operation and the average operation time in the PR+CSC group were both significantly shorter than those in the MISTA group (p < 0.05). There were significantly fewer complications in the PR+CSC group than those in the MISTA group (7.1 % vs 28.9 %, p < 0.001). The calcaneal width immediate postoperatively and at the final follow-up in the MISTA group were obviously improved compared to those in the PR+CSC group (p < 0.001). The variables of sagittal motion and hindfoot motion of the AOFAS scoring system in the PR+CSC group were significantly higher than those in the MISTA group (p < 0.05). The good and excellent results in the two groups were comparable for Sanders Type-II calcaneal fractures, but the good to excellent rate in the MISTA group was significantly higher for Sanders Type-III fractures (p < 0.05). CONCLUSION: The clinical outcomes are comparable between the two minimally invasive techniques in the treatment of Sanders Type-II DIACFs. The PR+CSC grafting is superior to the MISTA in terms of the average time between initial injury and operation, operation time, wound-related complications and subtalar joint activity. However, the MISTA has its own advantages in improving the calcaneal width, providing a more clear visualization and accurate reduction of the articular surface, especially for Sanders Type-III DIACFs. TRIAL REGISTRATION: ChiCTRIOR16008512 . 21 May 2016.

Anatomical and Biomechanical Stability of Single/Double Screw-Cancellous Bone Fixations of Regan-Morry Type III Ulnar Coronoid Fractures in Adults: CT Measurement and Finite Element Analysis.

OBJECTIVE: At present, it is still uncertain whether single screw has the same stability as double screws in the treatment of ulnar coronal process basal fracture (Regan-Morry type III). So, we aimed to compare the pull-out force and anti-rotation torque of anterior single/double screw-cancellous bone fixation (aSSBF, aDSBF) in this fracture, and further study the influencing factors on anatomical and biomechanical stability of smart screw internal fixations. METHODS: A total of 63 adult volunteers with no history of elbow injury underwent elbow CT scanning with associated three-dimensional reconstruction that enabled the measurements of bone density and fixed length of the proximal ulna and coronoid. The models of coronal process basal fracture, aSSBF and aDSBF, were developed and validated. Using the finite element model test, the sensitivity analysis of pull-out force and rotational torque was carried out. RESULTS: The pull-out force of aSSBF model was positively correlated with the density of the cancellous bone and linearly related to the fixed depth of the screw. The load pattern of pull-out force of aDSBF model was similar to that of aSSBF model. The ultimate torque of aDSBF model was higher than that of aSSBF model, but the load pattern of ultimate torque of both models was similar to each other when the fracture reset was satisfactory, and the screw nut attaches closely to coronoid process. Moreover, with enhancement of initial pre-tightening force, the increase of ultimate torque of both models was small. CONCLUSIONS: In addition to three pull-out stability factors of smart screw fixations, fracture surface fitting degree and nut fitting degree are the other two important anatomical and biomechanical stability factors of smart screw fixations both for rotational stability. When all pull-out stability and rotational stability factors meet reasonable conditions simultaneously, single or double screw fixation methods are stable for the treatments of ulnar coronoid basal fractures.

Tangeretin suppresses osteoarthritis progression via the Nrf2/NF-κB and MAPK/NF-κB signaling pathways.

BACKGROUND: Osteoarthritis (OA) is a globally prevalent degenerative disease characterized by extracellular matrix (ECM) degradation and inflammation. Tangeretin is a natural flavonoid that has anti-inflammatory properties. Studies have not explored whether tangeretin modulates OA development. PURPOSE: The aim of this study was to explore the potential effects and mechanism underlying the anti-OA properties of tangeretin. STUDY DESIGN: Effects of tangeretin on OA were detected in chondrocytes and OA mouse model. METHODS: Protective effects of tangeretin on murine articular chondrocytes treated with interleukin-1ß (IL-1ß) were evaluated using qPCR, western blot analysis, ELISA, ROS detection and immunofluorescent staining in vitro. Healing effect of tangeretin on cartilage degradation in mice was assessed through X-ray imaging, histopathological analysis, immunohistochemical staining and immunofluorescent staining in vivo. RESULTS: Tangeretin suppressed IL-1ß-mediated inflammatory mediator secretion and degradation of ECM in chondrocytes. The results showed that tangeretin abrogated destabilized medial meniscus (DMM)-induced cartilage degradation in mice. Mechanistic studies showed that tangeretin suppressed OA development by downregulating activation of NF-κB by activating Nrf2/HO-1 axis and suppressing MAPK signaling pathway. CONCLUSION: Tangeretin abrogates OA progression by inhibiting inflammation as well as ECM degradation in chondrocytes and animal models. Effects of tangeretin are mediated through Nrf2/NF-κB and the MAPK/NF-κB pathways. Thus, tangeretin is a potential therapeutic agent for osteoarthritis treatment.

Changes in radiological parameters during reduction of femoral neck fractures: A radiographic evaluation of cadavers.

OBJECTIVE: To investigate changes in the Garden index and other radiological parameters during reduction of femoral neck fractures. METHODS: Ten healthy, human femoral specimens were obtained. A 2.0 mm diameter Kirschner wire was implanted in the centre of the femoral head. A perpendicular osteotomy was made in the middle of the femoral neck. The distal osteotomy surface was used as the angle of rotation (pronation and supination up to 90° at 10° intervals). Anterior-posterior and lateral view radiographs were taken at different angles. The Garden index and other relevant data were analysed using the picture archiving and communication system. Changes in the area of the femoral head fovea at different rotation angles were measured. RESULTS: There were no significant differences in the Garden index between 0-30° of pronation and supination (p > .05). For angles of 40-90°, there were statistically significant differences in the Garden index (p < .05). The area of femoral head fovea decreased with increasing pronation angle, and increased with increasing supination angle. CONCLUSIONS: The Garden index does not change significantly if the angle of fracture rotation is 0-30° (in either pronation or supination) during femoral neck fracture reduction. Therefore, it is impossible to judge the rotation of fracture in this range of angles. The Garden index can detect the rotation of fracture for rotation angles of 40-90° (in either pronation or supination). Changes in the area of the femoral head fovea can help determine the rotation of femoral neck fractures. LEVEL OF EVIDENCE: Level V.

Comparison of percutaneous cross screw fixation versus open reduction and internal fixation for pelvic Day type II crescent fracture-dislocation: case-control study.

OBJECTIVE: To investigate the clinical outcomes of percutaneous cross screws internal fixation for pelvic Day type II crescent fracture-dislocation. METHODS: We reviewed 66 consecutive patients undergoing surgical treatment for Day type II crescent fracture-dislocation from June 2005 to December 2017. Percutaneous cross screws internal fixation was performed in 40 patients, and open reduction and internal fixation was performed in 26 patients. The patient characteristics, surgical complications, radiographic and clinical outcomes and were compared. RESULTS: There was no statistically difference on the mean time from injury to surgery between the two groups. The time of operation, the amount of blood loss, the length of incision, and the hospital stay were significantly shorter in the percutaneous cross screws internal fixation group. No significant difference on Matta scores and Majeed scores between the two groups. The open reduction and internal fixation group resulted in a higher rate of intraoperative hemorrhage, nerve injury, discomfort, and pain. CONCLUSION: Percutaneous cross screws internal fixation for Day II type pelvic crescent fracture-dislocation was safe and effective. Minimally invasive fixation had the advantages of short operation and hospitalization time, less intraoperative bleeding, and surgical trauma.

A novel percutaneous crossed screws fixation in treatment of Day type II crescent fracture-dislocation: A finite element analysis.

OBJECTIVE: Day type II crescent fracture-dislocation is a subtype of pelvic lateral compression injury. At present, there is still a controversy on the operative approach and fixation technique. We have put forward closed reduction and percutaneous crossed screws fixation for treating type-II crescent fracture-dislocation. Finite element analysis is used to compare the biomechanical properties between percutaneous crossed screws and other internal fixations. METHODS: A three-dimensional finite element model of Day type-II crescent fracture-dislocation was simulated using 5 implants, including double anterior plates (Model A), one posterior plate and one iliac screw (Model B), one sacroiliac joint screw (Model C), crossed one iliac screw and one sacroiliac joint screw (Model D), and crossed two iliac screws and one sacroiliac joint screw (Model E). 600-N stress was applied to S1 vertebral end-plate. To evaluate the biomechanical properties, the stress distribution and displacement distribution of the pelvis, stress distribution of the crescent fragment and stress distribution of plate and cannulated screw were recorded and analyzed. RESULTS: Under the loading of 600N, the maximum pelvic displacements in the finite element model were compared as follows: model E (0.070 â€‹mm), model D (0.071 â€‹mm), model A (0.080 â€‹mm), model C (0.096 â€‹mm), and model B (0.112 â€‹mm). The maximum displacements of crescent fragment were compared as follows: model E (0.018 â€‹mm), model B (0.022 â€‹mm), model D (0.023 â€‹mm), model A (0.030 â€‹mm), and model C (0.043 â€‹mm). The maximum stress of all implants were compared as follows: model D (90.01 â€‹Mpa), model E (81.60 â€‹Mpa), model C (69.07 â€‹Mpa), model A (56.51 â€‹Mpa), model B (18.29 â€‹Mpa). Model E and model D could provide better mechanical support for whole pelvic. CONCLUSIONS: With sufficient biomechanical stability and minimally invasive advantage, percutaneous crossed screw fixation is a recommended treatment for Day Type-II Crescent Fracture-dislocation. It is recommended to fix crescent fracture fragment and sacroiliac joint simultaneously during the operation. If it is difficult to fix the both position, the sacroiliac joint is preferentially fixed. THE TRANSLATIONAL POTENTIAL OF THIS ARTICLE: There is a controversy on the operative approach and fixation technique of Day type-II crescent fracture-dislocation. This article proves that percutaneous crossed screw fixation is a recommended treatment for Day type-II crescent fracture-dislocation by finite element analysis.

Eupatilin protects chondrocytes from apoptosis via activating sestrin2-dependent autophagy.

Cartilage degradation is the main characterization of osteoarthritis (OA). Accumulating evidence suggests that chondrocyte apoptosis and autophagy are associated with cartilage degradation. Thus, we investigated the protective effect and underlying mechanism of eupatilin for treating OA. IL-1ß was used to simulate OA in vitro. Data show that eupatilin treatment attenuated IL-1ß-induced apoptosis of chondrocytes. Autophagy was also activated by eupatilin in a dose-dependent manner. Then, pretreatment with chloroquine (CQ), an autophagic inhibitor, decreased eupatilin-induced autophagy and increased apoptosis in the chondrocytes. To investigate the mechanism of eupatilin, the expressions of sestrin2 and mTOR were measured using Western blot; eupatilin upregulated sestrin2 but downregulated mTOR phosphorylation. The administration of sestrin2-siRNA significantly decreased autophagy and reversed the protective effect of eupatilin against chondrocyte apoptosis and degradation of the cartilage matrix. Thus, eupatilin can inhibit IL-1ß-induced apoptosis via sestrin2-dependent autophagy in chondrocytes.

Treatment of Die-Punch Fractures with 3D Printing Technology.

PURPOSE: We evaluated the feasibility, accuracy and effectiveness of applying three-dimensional (3D) printing technology for preoperative planning for die-punch fractures. METHODS: A total of 107 patients who underwent die-punch fracture surgery were enrolled in the study. They were randomly divided into two groups: 52 cases in the 3D model group and 55 cases in the routine group. A 3D digital model of each die-punch fracture was reconstructed in the 3D group. The 3D digital model was imported to a 3D printer to build the full solid model. The operation time, blood loss volume, and the number of intraoperative fluoroscopy were recorded. Follow-up was performed to evaluate the patients' surgical outcomes. RESULTS: Treatment of die-punch fractures using the 3D printing approach reduced the number of intraoperative fluoroscopy, blood loss volume, and operation time, but did not improve wrist function compared to those in the routine group. The patients wanted the doctor to use the 3D model to introduce the condition and operative plan because it was easier for them to understand. The orthopedic surgeons thought that the 3D model was useful for communicating with their patients, but their satisfaction with the preoperative plan was much lower than the benefit of using the 3D model to communicate with their patients. CONCLUSIONS: 3D printing technology produced more accurate morphometric information for orthopedists to provide personalized surgical planning and communicate better with their patients. However, it is difficult to use widely in the department of orthopedics.

3D printing-based minimally invasive cannulated screw treatment of unstable pelvic fracture.

BACKGROUND: Open reduction and internal fixation of pelvic fractures could restore the stability of the pelvic ring, but there were several problems. Minimally invasive closed reduction cannulated screw treatment of pelvic fractures has lots advantages. However, how to insert the cannulated screw safely and effectively to achieve a reliable fixation were still hard for orthopedist. Our aim was to explore the significance of 3D printing technology as a new method for minimally invasive cannulated screw treatment of unstable pelvic fracture. METHODS: One hundred thirty-seven patients with unstable pelvic fractures from 2014 to 2016 were retrospectively analyzed. Based on the usage of 3D printing technology for preoperative simulation surgery, they were assigned to 3D printing group (n = 65) and control group (n = 72), respectively. These two groups were assessed in terms of operative time, intraoperative fluoroscopy, postoperative reduction effect, fracture healing time, and follow-up function. The effect of 3D printing technology was evaluated through minimally invasive cannulated screw treatment. RESULTS: There was no significant difference in these two groups with respect to general conditions, such as age, gender, fracture type, time from injury to operation, injury cause, and combined injury. Length of surgery and average number of fluoroscopies were statistically different for 3D printing group and the control group (p < 0.01), i.e., 58.6 vs. 72.3 min and 29.3 vs. 37 min, respectively. Using the Matta radiological scoring systems, the reduction was scored excellent in 21/65 cases (32.3%) and good in 30/65 cases (46.2%) for the 3D printing group, versus 22/72 cases (30.6%) scored as excellent and 36/72 cases (50%) as good for the control group. On the other hand, using the Majeed functional scoring criteria, there were 27/65 (41.5%) excellent and 26/65 (40%) good cases for the 3D printing group in comparison to 30/72 (41.7%) and 28/72 (38.9%) cases for the control group, respectively. This suggests no significant difference between these two groups about the function outcomes. CONCLUSION: Full reduction and proper fixation of the pelvic ring and reconstruction of anatomical morphology are of great significance to patients' early functional exercise and for the reduction of long-term complications. This retrospective study has demonstrated the 3D printing technology as a potential approach for improving the diagnosis and treatment of pelvic fractures. TRIAL REGISTRATION: The study was retrospectively registered at the Chinese Clinical Trial Registry, number: ChiCTR-TRC-17012798, trial registration date: 26 Sept. 2017.

Comparison of the Conventional Surgery and the Surgery Assisted by 3d Printing Technology in the Treatment of Calcaneal Fractures.

PURPOSE: This study was aimed to compare conventional surgery and surgery assisted by 3D printing technology in the treatment of calcaneal fractures. In addition, we also investigated the effect of 3D printing technology on the communication between doctors and patients. METHODS: we enrolled 75 patients with calcaneal fracture from April 2014 to August 2016. They were divided randomly into two groups: 35 cases of 3D printing group, 40 cases of conventional group. The individual models were used to simulate the surgical procedures and carry out the surgery according to plan in 3D printing group. Operation duration, blood loss volume during the surgery, number of intraoperative fluoroscopy and fracture union time were recorded. The radiographic outcomes Böhler angle, Gissane angle, calcaneal width and calcaneal height and final functional outcomes including VAS and AOFAS score as well as the complications were also evaluated. Besides, we made a simple questionnaire to verify the effectiveness of the 3D-printed model for both doctors and patients. RESULTS: The operation duration, blood loss volume and number of intraoperative fluoroscopy for 3D printing group was 71.4 ± 6.8 minutes, 226.1 ± 22.6 ml and 5.6 ± 1.9 times, and for conventional group was 91.3 ± 11.2 minutes, 288.7 ± 34.8 ml and 8.6 ± 2.7 times respectively. There was statistically significant difference between the conventional group and 3D printing group (p < 0.05). Additionally, 3D printing group achieved significantly better radiographic results than conventional group both postoperatively and at the final follow-up (p < 0.05). However, No significant difference was noted in the final functional outcomes between the two groups. As for complications, there was no significant difference between the two groups. Furthermore, the questionnaire showed that both doctors and patients exhibited high scores of overall satisfaction with the use of a 3D printing model. CONCLUSION: This study suggested the clinical feasibility of 3D printing technology in treatment of calcaneal fractures.

The addition of 3D printed models to enhance the teaching and learning of bone spatial anatomy and fractures for undergraduate students: a randomized controlled study.

BACKGROUND: Whether or not the addition of 3D (three-dimension) printed models can enhance the teaching and learning environment for undergraduate students in regard to bone spatial anatomy is still unknown. In this study, we investigated the use of 3D printed models versus radiographic images as a technique for the education of medical students about bone spatial anatomy and fractures. METHODS: The computed tomography (CT) data from four patients, each with a different fracture type (one spinal fracture, one pelvic fracture, one upper limb fracture, and one lower limb fracture), were obtained, and 3D models of the fractures were printed. A total of 90 medical students were enrolled in the study and randomly divided into two groups as follows: a traditional radiographic image group (presented by PowerPoint) and a 3D printed model group (combined PowerPoint and 3D models). Each student answered 5 questions about one type of fracture and completed a visual analog scale of satisfaction (0-10 points). RESULTS: No significant differences were found in the upper limb or lower limb test scores between the 3D printed model group and the traditional radiographic image group; however, the scores on the pelvis and spine test for the traditional radiographic image group were significantly lower than the scores for the 3D printed model group (P=0.000). No significant differences were found in the test-taking times for the upper limb or lower limb (P=0.603 and P=0.746, respectively) between the two groups; however, the test-taking times for the pelvis and spine in the traditional radiographic image group were significantly longer than those of the 3D printed model group (P=0.000 and P=0.002, respectively). CONCLUSIONS: The 3D printed model may improve medical students' understanding of bone spatial anatomy and fractures in some anatomically complex sites.

[Biomechanical assessment of newly-designed proximal femoral medial buttress plate for treatment of reverse oblique femoral intertrochanteric fracture].

Objective: To evaluate the biomechanical properties of proximal femoral medial buttress plate (PFMBP) for fixing the reverse oblique intertrochanteric fractures by comparing with proximal femoral locking compression plate (PFLCP) and proximal femoral nail antirotation (PFNA). Methods: Eighteen synthetic femoral bone models (Synbone) were divided into 3 groups (group PFLCP, group PFNA, and group PFMBP), 6 models in each group; an AO 31-A3.1 reverse oblique femoral intertrochanteric fracture was made based on the same criterion. After being fixed and embeded, the axial load testing, torsion testing, and axial load-to-failure testing were performed on each model. The axial displacement of different loads, torque of different torsion angles, and failure load of each model were recorded, and the stiffness of axial load and torsion were calculated. Results: The axial stiffness in groups PFLCP, PFNA, and PFMBP were (109.42±30.14), (119.13±29.14), and (162.05±22.05) N/mm respectively, showing significant differences between groups ( P<0.05). There were significant differences in torque between different torsion angles in the same group, as well as in the torque between groups at the same torsional angle ( P<0.05). The torsion stiffness in groups PFLCP, PFNA, and PFMBP were (1.45±0.44), (1.10±0.13), and (1.36±0.32) N·mm/deg respectively; there were significant differences when compared groups PFLCP and PFMBP with group PFNA ( P<0.05), but no significant difference was found between group PFLCP and group PFMBP ( P>0.05). The failure loads of groups PFLCP, PFNA, and PFMBP were (1 408.88± 0.17), (1 696.56±0.52), and (2 154.65±0.10) N respectively, showing significant differences between groups ( P<0.05). Conclusion: The newly-designed PFMBP is better than PFNA and PFLCP in axial load stiffness and torsion stiffness for fixing reverse oblique intertrochanteric fracture by biomechanical test, indicating that reconstruction of medial stability is a key element for unstable intertrochanteric fracture.

Paeonol Inhibits IL-1ß-Induced Inflammation via PI3K/Akt/NF-κB Pathways: In Vivo and Vitro Studies.

Paeonol, the main active component isolated from the root of Paeonia suffruticosa, has been reported to have anti-inflammatory properties. However, the effects of paeonol on osteoarthritis (OA) remain unclear. The aim of this study was to investigate the anti-inflammatory effects and mechanism of paeonol in IL-1ß-induced human OA chondrocytes as well as mice OA models. Human OA chondrocytes were pretreated with different concentrations of paeonol 2 h prior to IL-1ß (10 ng/mL) stimulation for 24 h. Nitric oxide (NO) production was determined by Griess method. The levels of prostaglandin E2 (PGE2), matrix metalloproteinase 1 (MMP-1), MMP-3, and MMP-13 were assessed by ELISA. Inducible nitric oxide synthase (INOS), COX-2, and PI3K/Akt/NF-κB-related signaling molecules production were measured by Western blot. In vivo, mice OA models were established by destabilization of the medial meniscus. One month after surgery, mice in paeonol-treated group were given intraperitoneal injection of paeonol in 30 mg/kg every day, while mice of vehicle-treated group were injected with DMSO under the same conditions. Hematoxylin and eosin as well as Safranin-O staining were applied to assess the severity of cartilage lesions. The results showed that pretreatment with paeonol could inhibit IL-1ß-induced NO and PGE2 production. Meanwhile, the overproduction of INOS, COX-2, MMP-1, MMP-3, and MMP-13 were also reversed by paeonol. Moreover, paeonol was found to inhibit IL-1ß-induced NF-κB activation, PI3K, and AKT phosphorylation. In vivo, treatment with paeonol exhibited less cartilage degradation and lower Osteoarthritis Research Society International scores in mice OA models. In conclusion, these results suggest that paeonol may be a potential therapeutic agent in the treatment of OA.