YY1-regulated lncRNA SOCS2-AS1 suppresses HCC cell stemness and progression via miR-454-3p/CPEB1.

BACKGROUND: Cancer stem cells are one fundamental reason for the high recurrence rate of hepatocellular carcinoma (HCC) and its resistance to treatment. This study explored the mechanism by which SOCS2-AS1 affects HCC cell stemness. METHODS: Stem cells of HCC cell lines Huh7 and SNU-398 were sorted as NANOG-positive by flow cytometry. Stem cell sphere formation ability was detected. Stem cell viability, migration, invasion, and apoptosis were assessed by colony formation assays, Transwell assays, wound-healing assays, and TUNEL assays, respectively. The binding sites for SOCS2-AS1, miR-454-3p, miR-454-3p, and CPEB1 mRNA were assessed by dual-luciferase reporter assays. Quantitative real-time PCR (qPCR) and Western blot studies were performed to evaluate gene expression levels. ChIP and EMSA assays were conducted to confirm that YY1 binds with the SOCS2-AS1 promoter. A subcutaneous xenograft model was used to verify results in vivo. Tumor tissues were analyzed by H&E and TUNEL staining. RESULTS: SOCS2-AS1 was expressed at low levels in NANOG+ HCC stem cells, and HCC patients with a high level of SOCS2-AS1 expression had a higher survival rate. SOCS2-AS1 inhibited HCC cell stemness, migration, and invasion, and increased the cisplatin sensitivity of HCC cells by regulating miR-454-3p/CPEB1. YY1 was confirmed as a transcription factor of SOCS2-AS1, and served to inhibit SOCS2-AS1 transcription. YY1 knockdown suppressed HCC stemness via SOCS2-AS1. The role of SOCS2-AS1 was confirmed in a subcutaneous xenograft model, and SOCS2-AS1 overexpression enhanced the inhibitory effect of cisplatin on HCC in vivo. CONCLUSIONS: YY1-regulated lncRNA SOCS2-AS1 suppresses HCC cell stemness and progression via miR-454-3p/CPEB1.

Crossover from Ising- to Rashba-type superconductivity in epitaxial Bi2Se3/monolayer NbSe2 heterostructures.

A topological insulator (TI) interfaced with an s-wave superconductor has been predicted to host topological superconductivity. Although the growth of epitaxial TI films on s-wave superconductors has been achieved by molecular-beam epitaxy, it remains an outstanding challenge for synthesizing atomically thin TI/superconductor heterostructures, which are critical for engineering the topological superconducting phase. Here we used molecular-beam epitaxy to grow Bi2Se3 films with a controlled thickness on monolayer NbSe2 and performed in situ angle-resolved photoemission spectroscopy and ex situ magnetotransport measurements on these heterostructures. We found that the emergence of Rashba-type bulk quantum-well bands and spin-non-degenerate surface states coincides with a marked suppression of the in-plane upper critical magnetic field of the superconductivity in Bi2Se3/monolayer NbSe2 heterostructures. This is a signature of a crossover from Ising- to Rashba-type superconducting pairings, induced by altering the Bi2Se3 film thickness. Our work opens a route for exploring a robust topological superconducting phase in TI/Ising superconductor heterostructures.

Confined Monolayer Ag As a Large Gap 2D Semiconductor and Its Momentum Resolved Excited States.

2D materials have intriguing quantum phenomena that are distinctively different from their bulk counterparts. Recently, epitaxially synthesized wafer-scale 2D metals, composed of elemental atoms, are attracting attention not only for their potential applications but also for exotic quantum effects such as superconductivity. By mapping momentum-resolved electronic states using time-resolved and angle-resolved photoemission spectroscopy (ARPES), we reveal that monolayer Ag confined between bilayer graphene and SiC is a large gap (>1 eV) 2D semiconductor, consistent with ab initio GW calculations. The measured valence band dispersion matches the GW quasiparticle band structure. However, the conduction band dispersion shows an anomalously large effective mass of 2.4 m0. Possible mechanisms for this large enhancement in the "apparent mass" are discussed.

Momentum-Space Spin Antivortex and Spin Transport in Monolayer Pb.

Nontrivial momentum-space spin texture of electrons can be induced by spin-orbit coupling and underpins various spin transport phenomena, such as current-induced spin polarization and the spin Hall effect. In this work, we find a nontrivial spin texture, spin antivortex, can appear at certain momenta on the Γ-K line in a 2D monolayer Pb on top of SiC. Different from spin vortex due to the band degeneracy in the Rashba model, the existence of this spin antivortex is guaranteed by the Poincaré-Hopf theorem and thus topologically stable. Accompanied with this spin antivortex, a Lifshitz transition of Fermi surfaces occurs at certain momenta on the K-M line, and both phenomena are originated from the anticrossing between the j=1/2 and j=3/2 bands. A rapid variation of the response coefficients for both the current-induced spin polarization and spin Hall conductivity is found when the Fermi energy is tuned around the spin antivortex. Our work demonstrates the monolayer Pb as a potentially appealing platform for spintronic applications.

Nonstoichiometric Salt Intercalation as a Means to Stabilize Alkali Doping of 2D Materials.

Although doping with alkali atoms is a powerful technique for introducing charge carriers into physical systems, the resulting charge-transfer systems are generally not air stable. Here we describe computationally a strategy towards increasing the stability of alkali-doped materials that employs stoichiometrically unbalanced salt crystals with excess cations (which could be deposited during, e.g., in situ gating) to achieve doping levels similar to those attained by pure alkali metal doping. The crystalline interior of the salt crystal acts as a template to stabilize the excess dopant atoms against oxidation and deintercalation, which otherwise would be highly favorable. We characterize this doping method for graphene, NbSe_{2}, and Bi_{2}Se_{3} and its effect on direct-to-indirect band gap transitions, 2D superconductivity, and thermoelectric performance. Salt intercalation should be generally applicable to systems which can accommodate this "ionic crystal" doping (and particularly favorable when geometrical packing constraints favor nonstoichiometry).

Illuminating Invisible Grain Boundaries in Coalesced Single-Orientation WS2 Monolayer Films.

Engineering atomic-scale defects is crucial for realizing wafer-scale, single-crystalline transition metal dichalcogenide monolayers for electronic devices. However, connecting atomic-scale defects to larger morphologies poses a significant challenge. Using electron microscopy and ReaxFF reactive force field-based molecular dynamics simulations, we provide insights into WS2 crystal growth mechanisms, providing a direct link between synthetic conditions and microstructure. Dark-field TEM imaging of coalesced monolayer WS2 films illuminates defect arrays that atomic-resolution STEM imaging identifies as translational grain boundaries. Electron diffraction and high-resolution imaging reveal that the films have nearly a single orientation with imperfectly stitched domains that tilt out-of-plane when released from the substrate. Imaging and ReaxFF simulations uncover two types of translational mismatch, and we discuss their origin related to relatively fast growth rates. Statistical analysis of >1300 facets demonstrates that microstructural features are constructed from nanometer-scale building blocks, describing the system across sub-Ångstrom to multimicrometer length scales.

Atomically thin half-van der Waals metals enabled by confinement heteroepitaxy.

Atomically thin two-dimensional (2D) metals may be key ingredients in next-generation quantum and optoelectronic devices. However, 2D metals must be stabilized against environmental degradation and integrated into heterostructure devices at the wafer scale. The high-energy interface between silicon carbide and epitaxial graphene provides an intriguing framework for stabilizing a diverse range of 2D metals. Here we demonstrate large-area, environmentally stable, single-crystal 2D gallium, indium and tin that are stabilized at the interface of epitaxial graphene and silicon carbide. The 2D metals are covalently bonded to SiC below but present a non-bonded interface to the graphene overlayer; that is, they are 'half van der Waals' metals with strong internal gradients in bonding character. These non-centrosymmetric 2D metals offer compelling opportunities for superconducting devices, topological phenomena and advanced optoelectronic properties. For example, the reported 2D Ga is a superconductor that combines six strongly coupled Ga-derived electron pockets with a large nearly free-electron Fermi surface that closely approaches the Dirac points of the graphene overlayer.

Unexpected Near-Infrared to Visible Nonlinear Optical Properties from 2-D Polar Metals.

Near-infrared-to-visible second harmonic generation from air-stable two-dimensional polar gallium and indium metals is described. The photonic properties of 2D metals, including the largest second-order susceptibilities reported for metals (approaching 10 nm/V), are determined by the atomic-level structure and bonding of two-to-three-atom-thick crystalline films. The bond character evolved from covalent to metallic over a few atomic layers, changing the out-of-plane metal-metal bond distances by approximately ten percent (0.2 Å), resulting in symmetry breaking and an axial electrostatic dipole that mediated the large nonlinear response. Two different orientations of the crystalline metal atoms, corresponding to lateral displacements <2 Å, persisted in separate micrometer-scale terraces to generate distinct harmonic polarizations. This strong atomic-level structure-property interplay suggests metal photonic properties can be controlled with atomic precision.

Nonlinear Dark-Field Imaging of One-Dimensional Defects in Monolayer Dichalcogenides.

One-dimensional defects in two-dimensional (2D) materials can be particularly damaging because they directly impede the transport of charge, spin, or heat and can introduce a metallic character into otherwise semiconducting systems. Current characterization techniques suffer from low throughput and a destructive nature or limitations in their unambiguous sensitivity at the nanoscale. Here we demonstrate that dark-field second harmonic generation (SHG) microscopy can rapidly, efficiently, and nondestructively probe grain boundaries and edges in monolayer dichalcogenides (i.e., MoSe2, MoS2, and WS2). Dark-field SHG efficiently separates the spatial components of the emitted light and exploits interference effects from crystal domains of different orientations to localize grain boundaries and edges as very bright 1D patterns through a Cerenkov-type SHG emission. The frequency dependence of this emission in MoSe2 monolayers is explained in terms of plasmon-enhanced SHG related to the defect's metallic character. This new technique for nanometer-scale imaging of the grain structure, domain orientation and localized 1D plasmons in 2D different semiconductors, thus enables more rapid progress toward both applications and fundamental materials discoveries.

MiRNA-206 inhibits hepatocellular carcinoma cell proliferation and migration but promotes apoptosis by modulating cMET expression.

A close relationship between cancer progression and microRNAs (miRNAs) regulation has been demonstrated. Abnormal microRNA-206 (miR-206) expression has been shown to be related to the development of malignancies. However, the role of miR-206 in hepatocellular carcinoma (HCC) remains unclear. Here, we evaluated the function of miR-206 in HCC. Results showed that miR-206 expression was decreased in 27 human HCC tissues compared with that of adjacent normal tissues. Conversely, cMET was up-regulated in human HCC cancer tissues, and cMET levels were shown to be negatively correlated with miR-206 expression. Abnormally increased miR-206 expression in three HCC cell lines (SMMC-7721, HepG2, and Huh7) attenuated cell viability, migration, and invasion. Increased apoptosis was also observed in these miR-206 expressing cells. Furthermore, we identified that miR-206 targets the 3'-UTR of the cMET gene for silencing, and restoration of cMET expression reversed the inhibitory effect of miR-206 on HCC. Tumor cells expressing miR-206 also showed delayed growth in the in vivo experiments compared with the controls. Altogether, our findings provide new insights into the molecular mechanisms of HCC oncogenesis.

Theory of Finite-Length Grain Boundaries of Controlled Misfit Angle in Two-Dimensional Materials.

Grain boundaries in two-dimensional crystals are usually thought to separate distinct crystallites and as such they must either form closed loops or terminate at the boundary of a sample. However, when an atomically thin two-dimensional crystal grows on a substrate of nonzero Gaussian curvature, it can develop finite-length grain boundaries that terminate abruptly within a monocrystalline domain. We show that by properly designing the substrate topography, these grain boundaries can be placed at desired locations and at specified misfit angles, as the thermodynamic ground state of a two-dimensional (2D) system bound to a substrate. Compared against the hypothetical competition of growing defectless 2D materials on a Gaussian-curved substrate with consequential fold development or detachment from the substrate, the nucleation and formation of finite-length grain boundaries can be made energetically favorably given sufficient substrate adhesion on the order of tens of meV/Å2 for typical 2D materials. New properties specific to certain grain boundary geometries, including magnetism and metallicity, can thus be engineered into 2D crystals through topographic design of their substrates.

NanoVelcro: Theory of Guided Folding in Atomically Thin Sheets with Regions of Complementary Doping.

Folding has been commonly observed in two-dimensional materials such as graphene and monolayer transition metal dichalcogenides. Although interlayer coupling stabilizes these folds, it provides no control over the placement of the fold, let alone the final folded shape. Lacking nanoscale "fingers" to externally guide folding, control requires interactions engineered into the sheets that guide them toward a desired final folded structure. Here we provide a theoretical framework for a general methodology toward this end: atomically thin 2D sheets are doped with patterns of complementary n-type and p-type regions whose preferential adhesion favors folding into desired shapes. The two-colorable theorem in flat-foldable origami ensures that arbitrary folding patterns are in principle accessible to this method. This complementary doping method can be combined with nanoscale crumpling (by, for example, passage of 2D sheets through holes) to obtain not only control over fold placements but also the ability to distinguish between degenerate folded states, thus attaining nontrivial shapes inaccessible to sequential folding.

Defect Coupling and Sub-Angstrom Structural Distortions in W1-xMoxS2 Monolayers.

Two-dimensional materials offer a remarkably rich materials platform to study the origin of different material behaviors at the atomic level, and doping provides a key means of tailoring such materials' functional properties. The local atomic structure around such dopants can be critically important in determining the material's behavior as it could modulate scattering, catalytic activity, electronic and magnetic properties, and so forth. Here, using aberration-corrected scanning transmission electron microscopy (STEM) with sub-Ångstrom resolution in conjunction with density functional theory calculations, we demonstrate a strong coupling between Mo dopants and two types of defects in WS2 monolayers: sulfur monovacancies and grain boundaries. Although Mo does occupy a transition metal lattice site, it is not an ideal substitutional dopant: ∼80% of the S vacancies identified by STEM colocalize with Mo dopants, an affinity that appears to be enhanced by symmetry breaking of a partially occupied midgap defect state. Although a Mo dopant by itself does not considerably distort the WS2 lattice, it induces substantial lattice deformation by apparently facilitating the charging of a sulfur monovacancy paired with it, which is consistent with the results of first-principles calculations. This coupling of foreign substitutional dopants with vacancies could potentially be exploited to control the distribution and location of chalcogenide vacancies within transition metal dichalcogenides (TMD), by segregating vacancies into regions of high Mo concentration that are purposely placed away from active regions of TMD-based devices.

Intricate Resonant Raman Response in Anisotropic ReS2.

The strong in-plane anisotropy of rhenium disulfide (ReS2) offers an additional physical parameter that can be tuned for advanced applications such as logic circuits, thin-film polarizers, and polarization-sensitive photodetectors. ReS2 also presents advantages for optoelectronics, as it is both a direct-gap semiconductor for few-layer thicknesses (unlike MoS2 or WS2) and stable in air (unlike black phosphorus). Raman spectroscopy is one of the most powerful characterization techniques to nondestructively and sensitively probe the fundamental photophysics of a 2D material. Here, we perform a thorough study of the resonant Raman response of the 18 first-order phonons in ReS2 at various layer thicknesses and crystal orientations. Remarkably, we discover that, as opposed to a general increase in intensity of all of the Raman modes at excitonic transitions, each of the 18 modes behave differently relative to each other as a function of laser excitation, layer thickness, and orientation in a manner that highlights the importance of electron-phonon coupling in ReS2. In addition, we correct an unrecognized error in the calculation of the optical interference enhancement of the Raman signal of transition metal dichalcogenides on SiO2/Si substrates that has propagated through various reports. For ReS2, this correction is critical to properly assessing the resonant Raman behavior. We also implemented a perturbation approach to calculate frequency-dependent Raman intensities based on first-principles and demonstrate that, despite the neglect of excitonic effects, useful trends in the Raman intensities of monolayer and bulk ReS2 at different laser energies can be accurately captured. Finally, the phonon dispersion calculated from first-principles is used to address the possible origins of unexplained peaks observed in the Raman spectra, such as infrared-active modes, defects, and second-order processes.

Spontaneous Formation of Atomically Thin Stripes in Transition Metal Dichalcogenide Monolayers.

Whether an alloy is random or ordered can have profound effects on its properties. The close chemical similarity of W and Mo in the two-dimensional semiconductors MoS2 and WS2 has led to the expectation that WxMo1-xS2 is a random alloy. Here we report that triangular monolayer flakes of WxMo1-xS2 produced by sulfurization of MoO3/WO3 are not only nonrandom, but also anisotropic: W and Mo form atomically thin chains oriented parallel to the edges of the triangle, especially around x ∼ 0.5, as resolved by aberration-corrected transmission electron microscopy. First-principles calculations reveal that the binding energies of striped and random alloys are nearly identical but that phase segregation at the growth edge favors one metal over another depending on the local sulfur availability, independent of the composition deeper inside the monolayer. Thus, atomically thin striping is kinetically driven and controlled by fluctuations that couple the local chemical potentials of metals and chalcogenide. Considering the nearly identical electronic properties but very different atomic masses of Mo and W, the resulting striped alloy is electronically isotropic, but vibrationally anisotropic. Phonon anomalies associated with the stripe ordering are predicted, as is an anisotropic thermal conductivity. More generally, fluctuation-driven striping provides a mechanism to produce in-plane subnanometer superlattices within two-dimensional crystals, with broad implications for controlling the electronic, optical, and structural properties of these systems.

Investigation of halogenation during the biosynthesis of ramoplanin in Actinoplanes sp. ATCC33076.

Ramoplanin and enduracidin are lipopeptide antibiotics effective against Gram-positive pathogens, which share close similarity in structure and biosynthetic pathway. Both compounds have chlorine atoms attached to 4-hydroxyphenylglycine (Hpg) but with different chlorinating sites and levels. Here, to probe the factor affecting the site and level of halogenation, gene inactivation and heterologous expression were carried out in Actinoplanes sp. ATCC33076 by homologous recombination. Metabolite analysis confirmed that ram20 encodes the only halogenase in ramoplanin biosynthetic pathway, and enduracidin halogenase End30 could heterologously complement the ram20-deficient mutant. Additionally, the mannosyltransferase-deficient mutant produces a dichlorinated ramoplanin aglycone with the halogenation site at Hpg(13). This study has refined our understanding of how halogenation occurs in ramoplanin biosynthetic pathway, and lays the foundation for further exploitation of ramoplanin and enduracidin halogenase in combinatorial biosynthesis.

Low-Temperature Solution Synthesis of Few-Layer 1T '-MoTe2 Nanostructures Exhibiting Lattice Compression.

Molybdenum ditelluride, MoTe2 , is emerging as an important transition-metal dichalcogenide (TMD) material because of its favorable properties relative to other TMDs. The 1T ' polymorph of MoTe2 is particularly interesting because it is semimetallic with bands that overlap near the Fermi level, but semiconducting 2H-MoTe2 is more stable and therefore more accessible synthetically. Metastable 1T '-MoTe2 forms directly in solution at 300 °C as uniform colloidal nanostructures that consist of few-layer nanosheets, which appear to exhibit an approx. 1 % lateral lattice compression relative to the bulk analogue. Density functional theory calculations suggest that small grain sizes and polycrystallinity stabilize the 1T ' phase in the MoTe2 nanostructures and suppress its transformation back to the more stable 2H polymorph through grain boundary pinning. Raman spectra of the 1T '-MoTe2 nanostructures exhibit a laser energy dependence, which could be caused by electronic transitions.

Efficient and stabilized molecular doping of hole-transporting materials driven by a cyclic-anion strategy for perovskite solar cells.

Bis(trifluoromethane)sulfonimide lithium salt (Li-TFSI) is commonly used as an effective dopant to improve the performance of the hole-transporting material (HTM) in n-i-p perovskite solar cells (PSCs). However, the ultra-hygroscopic and migratory nature of Li-TFSI leads to inferior stability of PSCs. Here, we report on a strategy to regulate the anion unit in Li-TFSI from linear to cyclic, constructing a new dopant, lithium 1,1,2,2,3,3-hexafluoropropane-1,3-disulfonimide (Li-CYCLIC), for the state-of-the-art poly[bis(4-phenyl)(2,4,6-trimethylphenyl)amine] (PTAA). Mechanistic and experimental results reveal that the cyclic anion CYCLIC- exhibits stronger interaction with Li+ and PTAA˙+ compared with the linear anion TFSI-, thus significantly restraining the moisture absorption and migration of Li+ and improving the thermodynamic stability of PTAA˙+CYCLIC-. With this molecular engineering, the resulting PSCs based on Li-CYCLIC obtained an improved efficiency, along with remarkably enhanced stability, retaining 96% of the initial efficiency after over 1150 hours under continuous 1 sun illumination in an N2 atmosphere, yielding an extrapolated T 80 of over 12 000 hours. In a broader context, the proposed strategy of linear-to-cyclic doping provides substantial guidance for the subsequent advancement in the development of effective dopants for photoelectric devices.

Reversible intercalation of hexagonal boron nitride with Brønsted acids.

Hexagonal boron nitride (h-BN) is an insulating compound that is structurally similar to graphite. Like graphene, single sheets of BN are atomically flat, and they are of current interest in few-layer hybrid devices, such as transistors and capacitors, that contain insulating components. While graphite and other layered compounds can be intercalated by redox reactions and then converted chemically to suspensions of single sheets, insulating BN is not susceptible to oxidative intercalation except by extremely strong oxidizing agents. We report that stage-1 intercalation compounds can be formed by simple thermal drying of h-BN in Brønsted acids H2SO4, H3PO4, and HClO4. X-ray photoelectron and vibrational spectra, as well as electronic structure and molecular dynamics calculations, demonstrate that noncovalent interactions of these oxyacids with the basic N atoms of the sheets drive the intercalation process.

Functional identification of the gene encoding the enzyme involved in mannosylation in ramoplanin biosynthesis in Actinoplanes sp.

Ramoplanin is a lipopeptide antibiotic active against multi-drug-resistant, Gram-positive pathogens. Structurally, it contains a di-mannose moiety attached to the peptide core at Hpg(11). The biosynthetic gene cluster of ramoplanin has already been reported and the assembly of the depsipeptide has been elucidated but the mechanism of transferring sugar moiety to the peptide core remains unclear. Sequence analysis of the biosynthetic gene cluster indicated ramo-orf29 was a mannosyltransferase candidate. To investigate the involvement of ramo-orf29 in ramoplanin biosynthesis, gene inactivation and complementation have been conducted in Actinoplanes sp. ATCC 33076 by homologous recombination. Metabolite analysis revealed that the ramo-orf29 inactivated mutant produced no ramoplanin but the ramoplanin aglycone. Thus, ramo-orf29 codes for the mannosyltransferase in the ramoplanin biosynthesis pathway. This lays the foundation for further exploitation of the ramoplanin mannosyltransferase and aglycone in combinatorial biosynthesis.