Midterm Prospective Comparative Analysis of 2 Hard-on-Hard Bearing Total Hip Arthroplasty Designs.

INTRODUCTION: Hard-on-hard (HoH) bearing surfaces in total hip arthroplasty (THA) are commonly utilized in younger patients and may decrease mechanical wear compared to polyethylene bearing surfaces. To our knowledge, no study has prospectively compared the 2 most common HoH bearings, ceramic-on-ceramic (CoC) and metal-on-metal (MoM) THA. MATERIALS AND METHODS: We prospectively enrolled 40 patients to undergo an MoM THA and 42 patients to undergo a CoC THA utilizing the same acetabular component. Patients were followed up for a minimum of 2 years. Comparative outcomes included clinical scores, revision or reoperation for any reason, complication rates, and radiographic outcomes. RESULTS: The average follow-up was significantly longer in the CoC cohort (94 vs 74 months; P = .005). The CoC cohort had significantly improved Harris Hip Scores (95 vs 84; P = .0009) and pain scores (42 vs 34; P = .0003). The revision (0% vs 31%; P = .0001), reoperation (7.5% vs 36%; P = .004), and complication rates (10% vs 56%; P = .0001) were significantly lower in the CoC cohort. There were no statistically significant differences in radiographic parameters. CONCLUSION: The clinical outcomes in the CoC cohort exceeded the MoM cohort. It is unlikely that another prospective comparative study of HoH THAs will be conducted. Our midterm results support the use of CoC THA as a viable option that may reduce long-term wear in younger patients. Close surveillance of MoM THA patients is recommended considering the higher failure and complication rates reported in this cohort.

Femoral Implant Design Modification Decreases the Incidence of Patellar Crepitus in Total Knee Arthroplasty.

BACKGROUND: Patellar crepitus is a complication most commonly seen in patients implanted with a posterior-stabilized total knee arthroplasty (TKA). Recently, design changes in the patellofemoral geometry and the intercondylar box ratio have been optimized in newer TKA designs. A comparative study was performed to analyze the incidence of patellar crepitus between a historical vs modern TKA design. METHODS: A retrospective review of all patients at our institution that underwent a primary TKA with either a PFC Sigma or Attune posterior-stabilized TKA (DePuy, Inc, Warsaw, IN), with a minimum of 1-year follow-up duration was performed. A total of 1165 participants implanted with the PFC Sigma and 728 with the Attune design were analyzed. Patellar crepitus incidence, functional scores, and range of motion were recorded at each follow-up appointment. Statistical analyses were performed between the 2 groups to determine if there were differences in clinical outcomes. RESULTS: The incidence of crepitus in participants implanted with the Attune was 0.55% vs 6.26% in the PFC Sigma cohort (P < .001) at 1 year vs. 0.83% vs 9.4%, respectively at 2 years post operatively (P < .001). There were small differences in extension, flexion, and Knee Society Scores between the 2 groups that were not clinically meaningful. CONCLUSION: The Attune posterior-stabilized TKA demonstrated substantially less patellofemoral crepitus incidence than the historical control. We hypothesize that these findings are related to femoral component changes including a thinner and narrower anterior flange and a reduced femoral intercondylar box ratio.

Porous-Coated Metaphyseal Sleeves for Severe Femoral and Tibial Bone Loss in Revision TKA.

BACKGROUND: Metaphyseal bone loss is commonly encountered in revision total knee arthroplasty (TKA). Anderson Orthopaedic Research Institute types 2 and 3 defects generally require some form of metaphyseal fixation or augmentation. This study evaluates the midterm results of stepped, porous-coated metaphyseal sleeves in revision TKA in the setting of severe bone loss. METHODS: Patients who underwent revision TKA using metaphyseal sleeves from March 2006 to May 2014 at our institution were identified from a prospective research database. Preoperative patient characteristics and operative data were reviewed. Postoperative outcomes were compared with preoperative values. Primary study outcomes included complications, reoperations, radiographic assessment of sleeve osteointegration, and survivorship. RESULTS: One hundred sixteen knees (108 patients) underwent revision TKA with 152 metaphyseal sleeves (111 tibial and 41 femoral). Anderson Orthopaedic Research Institute defect classification included 5 type 2A, 89 type 2B, and 17 type 3 tibial defects; and 3 type 2A, 34 type 2B, and 4 type 3 femoral defects. There were 3 intraoperative fractures (1.9%) associated with sleeve preparation and/or insertion. Six knees (5 patients) were lost to follow-up and 5 patients (6 knees) died before 2 years. Of the remaining 104 knees (98 patients, 134 sleeves), mean follow-up was 5.3 years (range 2-9.6 years). Nineteen knees (16.4%) required reoperation, most commonly for recurrent infection. Only one sleeve demonstrated radiographic evidence of failed osteointegration, but did not require revision. Two sleeves (1.5%) required removal and/or resection for recurrent infection. CONCLUSION: This large retrospective series illustrates the utility of porous metaphyseal sleeves in revision TKA with a low rate of intraoperative complications, excellent osteointegration, and long-term fixation.

The withdrawn ASR™ THA and hip resurfacing systems: how have our patients fared over 1 to 6 years?

BACKGROUND: The Articular Surface Replacement™ (ASR™) metal-on-metal hip arthroplasty system (DePuy Orthopaedics, Inc, Warsaw, IN, USA) reportedly has a higher than anticipated early failure rate leading to a voluntary recall. This prompted us to evaluate all ASR™ components implanted at our center. QUESTIONS/PURPOSES: In all ASR™ components, we reported (1) revision rate, (2) blood metal ion levels, and (3) intraoperative findings for revisions related to adverse reaction to metal debris (ARMD). METHODS: We retrospectively reviewed all 172 patients (190 hips) who underwent THA (149 hips) or hip resurfacing (41 hips) with the ASR™ system. We determined failure rates. We obtained blood metal ion concentrations from 93 patients at last followup. We evaluated MRI studies and intraoperative histopathology. Minimum followup was 12 months (mean, 40 months; range, 12-74 months). RESULTS: At latest followup, we had revised 24 of 190 hips (13%): in 18 patients with THA and five patients with resurfacing. Mean time to revision was 45 months (range, 12-75 months). Mean blood concentrations were 13 µg/L (range, 0-150 µg/L) for cobalt and 6 µg/L (range, 0-87 µg/L) for chromium. Mean prerevision blood metal ion levels were higher in the revised group (cobalt: 48 µg/L; chromium: 18 µg/L) than in the nonrevised group (cobalt: 5 µg/L; chromium: 2 µg/L). ARMD was present in 14 of the 24 hips revised in this study. CONCLUSIONS: Surgeons must have a low threshold for concern for ARMD in patients with ASR™ systems. Blood metal ion levels and MRI can be used to evaluate patients with underperforming implants. Intraoperative histopathologic analysis and joint fluid cytology can help diagnose ARMD at the time of revision. LEVEL OF EVIDENCE: Level III, therapeutic study. See Instructions for Authors for a complete description of levels of evidence.

The effect of total hip arthroplasty surgical approach on postoperative gait mechanics.

Surgical approach for total hip arthroplasty (THA) is determined by clinician preference from limited prospective data. This study aimed to examine the effect of surgical approach (direct lateral, posterior, and anterolateral) on 6-week postoperative gait mechanics. Thirty-five patients (direct lateral, 8; posterior, 12; anterolateral, 15) were tested preoperatively and 6 weeks after THA. Patients underwent a gait analysis at a self-selected walking speed. A 2-way analysis of variance was used for analysis. Stride length, step length, peak hip extension, and walking speed increased after THA. The 3 surgical approach variables were not significantly different for any of the study variables after THA. All patients showed some increase in selected variables after THA regardless of surgical approach. In this study, surgical approach did not appear to significantly influence the early postoperative gait mechanics that were quantified.

Cost effectiveness analysis of hemiarthroplasty and total shoulder arthroplasty.

BACKGROUND: Total shoulder arthroplasty (TSA) and hemiarthroplasty (HA) are two viable surgical treatment options for glenohumeral osteoarthritis. Recent systematic reviews and randomized trials suggest that TSA, while more costly initially, may have superior outcomes with regard to pain, function and quality of life with lower revision rates. This study compared the cost-effectiveness of TSA with HA. METHODS: A Markov decision model was constructed for a cost-utility analysis of TSA compared to HA in a cohort of 64-year-old patients. Outcome probabilities and effectiveness were derived from the literature. Costs were estimated from the societal perspective using the national average Medicare reimbursement for the procedures in 2008 US dollars. Effectiveness was expressed in quality-adjusted life years (QALYs) gained. Principal outcome measures were average incremental costs, incremental effectiveness, incremental QALYs, and net health benefits. RESULTS: In the base case, HA resulted in a lower number of average QALYs gained at a higher average cost to society and was, therefore, dominated by the TSA strategy for the treatment of glenohumeral osteoarthritis. The cost effectiveness ratio for TSA and HA were $957/QALY and $1,194/QALY respectively. Sensitivity analysis revealed that if the utility of TSA is equal to, or revision rate lower than HA, TSA continues to be a dominant strategy. CONCLUSION: Total shoulder arthroplasty with a cemented glenoid is a cost-effective procedure, resulting in greater utility for the patient at a lower overall cost to the payer. These findings suggest that TSA is the preferred treatment for certain populations from both a patient and payer perspective.

Atraumatic Fracture of Cemented Vanguard Total Knee Arthroplasty Femoral Component.

The authors report the case of an atraumatic femoral component fracture 10 years after primary total knee arthroplasty (TKA) with a modern cemented fixed bearing system. The patient, a 70-year-old man, had the complication without inciting trauma, and he subsequently had severe pain and disability. This rare mode of TKA failure occurred at the superolateral aspect of the femoral component's anterior flange. At the time of revision, no femoral osteolysis was seen and the backside of the prosthesis fracture fragment was found to be free of cement. To the authors' knowledge, this is the first case of femoral component fracture in a Vanguard TKA (Biomet, Warsaw, Indiana), and the first case of fracture in a modern cobalt-chrome alloy femoral component associated with aseptic cement debonding. Femoral component stress fracture is a rare but serious complication of TKA. Reports of femoral component fracture in early designs were attributed to geometric design flaws, whereas modern TKA designs appear to fail when ingrowth failure, aseptic debonding, or osteolysis result in inadequate bony support of the prosthesis. Careful attention to bone cuts in porous-coated uncemented TKA systems and proper cementing technique in cemented TKA systems may preclude this rare complication. In the case of severe osteolysis, early revision may prevent catastrophic implant failure. [Orthopedics. 2020;43(5):e476-e479.].

Transient osteoporosis of the hip after bariatric surgery.

Transient osteoporosis is a rare manifestation of acute hip pain which typically resolves with weight-bearing restrictions and pain management. Our case report presents a patient who experienced atraumatic right hip pain a few weeks after an uncomplicated bariatric surgery and was diagnosed with transient osteoporosis of the hip. Her condition resolved after weeks of protected weight-bearing restrictions and nonsteroidal anti-inflammatories. Transient osteoporosis should be considered in the differential diagnosis of hip pain in patients who have undergone previous bariatric surgery.

Primary total knee arthroplasty in a patient with a chronic extensor mechanism deficiency.

A 44-year-old female presented with a chief complaint of left knee pain and dysfunction. The patient had a complex surgical history including patellar fracture repair, subsequent patellar ligament repair, and ultimately allograft reconstruction which was complicated by septic arthritis requiring graft resection. On presentation to our clinic, she was noted to have significant degenerative disease in addition to chronic extensor mechanism deficiency. She underwent primary total knee arthroplasty with concomitant tibial tubercle osteotomy and advancement. The patient has had an excellent result postoperatively including return of full range of motion without residual extensor lag.

Removing a well-fixed femoral sleeve during revision total knee arthroplasty.

The following surgical technique describes a case of a 51-year-old man with severe juvenile rheumatoid arthritis that required a 2-stage revision of an infected revision total knee implant. The patient had previously been implanted with a revision rotating platform, constrained condylar device which gained excellent fixation through the use of diaphyseal-engaging stems, and a well-ingrown, fully porous-coated femoral metaphyseal sleeve. To avoid intraoperative complications while removing the femoral sleeve, a novel technique for femoral sleeve extraction was used. Using this technique, the femoral sleeve was successfully removed without intraoperative fracture or substantial bone loss.