Highly Bionic Neurotransmitter-Communicated Neurons Following Integrate-and-Fire Dynamics.

In biological neural networks, chemical communication follows the reversible integrate-and-fire (I&F) dynamics model, enabling efficient, anti-interference signal transport. However, existing artificial neurons fail to follow the I&F model in chemical communication, causing irreversible potential accumulation and neural system dysfunction. Herein, we develop a supercapacitively gated artificial neuron that mimics the reversible I&F dynamics model. Upon upstream neurotransmitters, an electrochemical reaction occurs on a graphene nanowall (GNW) gate electrode of artificial neurons. Charging and discharging the supercapacitive GNWs mimic membrane potential accumulation and recovery, realizing highly efficient chemical communication upon use of acetylcholine down to 2 × 10-10 M. By combining artificial chemical synapses with axon-hillock circuits, the output of neural spikes is realized. With the same neurotransmitter and I&F dynamics, the artificial neuron establishes chemical communication with other artificial neurons and living cells, holding promise as a basic unit to construct a neural network with compatibility to organisms for artificial intelligence and deep human-machine fusion.

Preparation of a novel monoclonal antibody against active components of PHA-L from Phaseolus vulgaris and its functional characteristics.

BACKGROUND: Leukocyte phytohemagglutinin (PHA-L), derived from the L4 tetramer of PHA, has been frequently employed as a mitogen to induce T lymphocyte proliferation in vitro. The biological application of PHA-L in cancer diagnosis and treatment has gained traction in recent years. However, it has been noted that PHA-L obtained using traditional procedures has a massive amount of impurities or toxic components, which interfere with the activity of PHA-L. Preparation of a monoclonal antibody against active PHA-L is a significant tool for studying PHA-L's function and therapeutic potential. RESULTS: We successfully prepared monoclonal antibodies against the active components of PHA-L based on the whole PHA-L protein as an antigen, and found that monoclonal antibody 3C1C6G11 can be employed in western blot, immunofluorescence, and immunohistochemistry detection. Importantly, preliminary result shows that the mAb 3C1C6G11 may prevent PHA-L-induced cell aggregation and AICD (activation-induced cell death). CONCLUSIONS: The monoclonal antibody mAb 3C1C6G11 prepared in this study can be used as an effective tool for detecting PHA-L active components, investigating PHA-L's function and antineoplastic application.

Plasma-Enhanced Chemical Vapor Deposition of Two-Dimensional Materials for Applications.

ConspectusSince the rise of two-dimensional (2D) materials, synthetic methods including mechanical exfoliation, solution synthesis, and chemical vapor deposition (CVD) have been developed. Mechanical exfoliation prepares randomly shaped materials with small size. Solution synthesis introduces impurities that degrade the performances. CVD is the most successful one for low-cost scalable preparation. However, when it comes to practical applications, disadvantages such as high operating temperature (∼1000 °C), probable usage of metal catalysts, contamination, defects, and interstices introduced by postgrowth transfer are not negligible. These are the reasons why plasma-enhanced CVD (PECVD), a method that enables catalyst-free in situ preparation at low temperature, is imperatively desirable.In this Account, we summarize our recent progress on controllable preparation of 2D materials by PECVD and their applications. We found that there was a competition between etching and nucleation and deposition in PECVD, making it highly controllable to obtain desired materials. Under different equilibrium states of the competition, various 2D materials with diverse morphologies and properties were prepared including pristine or nitrogen-doped graphene crystals, graphene quantum dots, graphene nanowalls, hexagonal boron nitride (h-BN), B-C-N ternary materials (BCxN), etc. We also used mild plasma to modify or treat 2D materials (e.g., WSe2) for desired properties.PECVD has advantages such as low temperature, transfer-free process, and industrial compatibility, which enable facile, scalable, and low-cost preparation of 2D materials with clean surfaces and interfaces directly on noncatalytic substrates. These merits significantly benefit the as-prepared materials in the applications. Field-effect transistors with high motilities were directly fabricated on graphene and nitrogen-doped graphene. By use of h-BN as the dielectric interfacial layer, both mobilities and saturated power densities of the devices were improved owing to the clean, closely contacted interface and enhanced interfacial thermal dissipation. High-quality materials and interfaces also enabled promising applications of these materials in photodetectors, pressure sensors, biochemical sensors, electronic skins, Raman enhancement, etc. To demonstrate the commercial applications, several prototypical devices were studied such as distributed pressure sensor arrays, touching module on a robot hand for braille recognition, and smart gloves for recording sign language. Finally, we discuss opportunities and challenges of PECVD as a comprehensive preparation methodology of 2D materials for future applications beyond traditional CVD.

Mechanical and vibro-acoustic performance of sandwich panel with perforated honeycomb cores.

The effect of perforating the honeycomb walls of a honeycomb sandwich panel on the dynamic bending stiffness and sound transmission loss of the panel is investigated. The dynamic bending stiffness and sound transmission loss of several sandwich panels with different cores are calculated using a semi-analytical method, and the static bending stiffness and flatwise stiffness of these structures are also analyzed with the finite element method. Furthermore, the influences of the honeycomb shape, the hole shape of the perforated honeycomb wall, the number of perforations, and the wall thickness on the vibro-acoustic and mechanical properties of the sandwich panel are investigated. The results show that the static mechanical performance of the sandwich panel quickly reaches a high level when the ratio of honeycomb wall thickness to length t/l is about 5.3 × 10-3 and a square hole in the honeycomb wall can bring superior characteristics of "high static and low dynamic properties," significantly improving the sound insulation of the sandwich panel. This study makes an effective reference for the optimized design of the innovative sandwich structure in practical applications.

Force-Sensitive Interface Engineering in Flexible Pressure Sensors: A Review.

Flexible pressure sensors have received extensive attention in recent years due to their great importance in intelligent electronic devices. In order to improve the sensing performance of flexible pressure sensors, researchers are committed to making improvements in device materials, force-sensitive interfaces, and device structures. This paper focuses on the force-sensitive interface engineering of the device, which listing the main preparation methods of various force-sensitive interface microstructures and describing their respective advantages and disadvantages from the working mechanisms and practical applications of the flexible pressure sensor. What is more, the device structures of the flexible pressure sensor are investigated with the regular and irregular force-sensitive interface and accordingly the influences of different device structures on the performance are discussed. Finally, we not only summarize diverse practical applications of the existing flexible pressure sensors controlled by the force-sensitive interface but also briefly discuss some existing problems and future prospects of how to improve the device performance through the adjustment of the force-sensitive interface.

Ultrasensitive Detection of SARS-CoV-2 Antibody by Graphene Field-Effect Transistors.

The fast spread of SARS-CoV-2 has severely threatened the public health. Establishing a sensitive method for SARS-CoV-2 detection is of great significance to contain the worldwide pandemic. Here, we develop a graphene field-effect transistor (g-FET) biosensor and realize ultrasensitive SARS-CoV-2 antibody detection with a limit of detection (LoD) down to 10-18 M (equivalent to 10-16 g mL-1) level. The g-FETs are modified with spike S1 proteins, and the SARS-CoV-2 antibody biorecognition events occur in the vicinity of the graphene surface, yielding an LoD of ∼150 antibodies in 100 µL full serum, which is the lowest LoD value of antibody detection. The diagnoses time is down to 2 min for detecting clinical serum samples. As such, the g-FETs leverage rapid and precise SARS-CoV-2 screening and also hold great promise in prevention and control of other epidemic outbreaks in the future.

High-performance mid-infrared photodetection based on Bi2Se3 maze and free-standing nanoplates.

The pursuit of optoelectronic devices operating in mid-infrared regime is driven by both fundamental interests and commercial applications. The narrow bandgap (0.3 eV) of layered Bi2Se3 makes it a promising material for mid-infrared photodetection. However, the weak absorption of mid-infrared optical power and high dark current level restrict its performance. Here, a supply-control technique is applied to modulate the growth mode of Bi2Se3 crystal, and Bi2Se3 crystals with various morphologies are obtained. The nanoplates pattern transits from maze to freestanding when source mass was tuned. Due to the strong infrared absorption and photoelectric conversion efficiency of vertical Bi2Se3 nanoplates, the as-prepared vertical Bi2Se3 nanoplates/Si heterojunction shows excellent photoresponse and extremely low dark current. Among these devices based on different Bi2Se3 morphologies, freestanding nanoplates show the optimal mid-infrared characteristics, namely a photo-to-dark ratio of 2.0 × 104, a dark current of 0.21 pA, a response time of 23 ms, a specific detectivity of 6.1 × 1010 Jones (calculated) and 1.2 × 1010 Jones (measured) under 2.7 µm illumination and at room temperature. Notably, the specific detectivity of our devices are comparable to commercial InGaAs photodetectors. With the tunable- morphology growing technique and excellent photoresponding characteristics, Bi2Se3 nanomaterials are worth attention in optoelectronic field.

Functional Component Isolated from Phaseolus vulgaris Lectin Exerts In Vitro and In Vivo Anti-Tumor Activity Through Potentiation of Apoptosis and Immunomodulation.

Phytohemagglutinin (PHA), the lectin purified from red kidney bean (Phaseolus vulgaris), is a well-known mitogen for human lymphocyte. Because it has obvious anti-proliferative and anti-tumor activity, PHA may serve as a potential antineoplastic drug in future cancer therapeutics. However, the literature is also replete with data on detrimental effects of PHA including oral toxicity, hemagglutinating activity, and immunogenicity. There is a critical need to evaluate the functional as well as the toxic components of PHAs to assist the rational designs of treatment with it. In this report, we performed SDS-PAGE to identify components of PHA-L, the tetrameric isomer of PHA with four identical L-type subunits, and then characterized biological function or toxicity of the major protein bands through in vitro experiments. It was found that the protein appearing as a 130 kD band in SDS-PAGE gel run under the condition of removal of ß-mercaptoethanol from the sample buffer together with omission of a heating step could inhibit tumor cell growth and stimulate lymphocyte proliferation, while most of the 35 kD proteins are likely non-functional impurity proteins and 15 kD protein may be related to hemolytic effect. Importantly, the 130 kD functional protein exhibits promising in vivo anti-tumor activity in B16-F10 melanoma C57 BL/6 mouse models, which may be achieved through potentiation of apoptosis and immunomodulation. Altogether, our results suggest that PHA-L prepared from crude extracts of red kidney bean by standard strategies is a mixture of many ingredients, and a 130 kD protein of PHA-L was purified and identified as the major functional component. Our study may pave the way for PHA-L as a potential anticancer drug.

Highly stable all-in-one photoelectrochemical electrodes based on carbon nanowalls.

Photoelectrochemical (PEC) cells offer a promising approach for developing low-cost solar energy conversion systems. However, the lack of stable and cost-effective electrodes remains a bottleneck that hampers their practical applications. Here, we propose a kind of integrated all-in-one three-dimensional (3D) carbon nanowall (CNW) electrode without sensitized semiconductors for stable all-carbon PEC cells. The all-in-one CNW electrodes were fabricated by directly growing CNW on both sides of the SiO2/Si/SiO2 wafer employing the radio frequency plasmon enhanced chemical vapor deposition method. Benefitting from the interconnected 3D textured structure, the CNW can effectively absorb the incident light and provide a large electrochemical reaction interface at the CNW surface that promotes the separation of photogenerated charge carriers, which makes it a superior electrode material. Experimental results show that the all-in-one CNW electrodes possess excellent PEC performance with a photocurrent density of 830 µA cm-2. Moreover, the CNW electrodes exhibit excellent photoresponses over a wide waveband and superior stability with a maintained photocurrent response, even after 60 d, which outperforms the electrodes using the other two-dimensional layered materials or semiconductor sensitized electrodes. Such an all-in-one electrode with impressive photovoltaic properties provides a promising platform for PEC applications that is eco-friendly with high efficiency, excellent stability and low cost.

Broadband InSb/Si heterojunction photodetector with graphene transparent electrode.

Silicon-based Schottky heterojunction photodetectors are promising due to their compatibility with the semiconductor process. However, the applications of these devices are usually limited to wavelengths shorter than 1.1 µm due to the low absorption of electrode materials at infrared. In this report, silicon-based compound semiconductor heterojunction photodetectors with graphene transparent electrodes are fabricated. Due to the high absorption of InSb at infrared, as well as the good transparency and excellent electrical conductivity of the graphene, the as-prepared photodetectors show a broadband photoresponse with high performance which includes a specific detectivity of 1.9 [Formula: see text]1012 cm Hz1/2 W-1, responsivity of 132 mA W-1, on/off ratio of 1 [Formula: see text]105, rise time of 2 µs, 3 dB cut-off frequency of 172 kHz, and response wavelengths covering 635 nm, 1.55 µm and 2.7 µm. This report proves that graphene as a transparent electrode has a great effect on the performance improvement of silicon-based compound semiconductor heterojunction photodetectors.

Hybrid graphene heterojunction photodetector with high infrared responsivity through barrier tailoring.

The graphene/Si heterojunction is attractive for high gain and broadband photodetection through photogating effect. However, the photoresponsivity in these devices are still limited to under 1 A W-1 if no narrowband absorption-enhanced nanostructures were used. In this paper, the effects of barriers on photoresponse are systematically studied at 1550 nm wavelength. Different barrier heights are obtained through selection of substrates, graphene doping and electrical tuning. Lower barrier height for graphene side and higher barrier height for silicon side are found to be beneficial for better infrared photoresponse. Through Polyetherimide doping of graphene and back-gated electrical modulation, the responsivity finally reached 5.71 A W-1, which to our knowledge is among the best results for graphene-based infrared photodetectors with graphene adopted as a light-absorption material. It is found that the thermionic emission efficiency of indirect transition in graphene is related to the difference in emissioin barrier height, and the lifetime of photoinduced carriers in the channel can be enhanced by built-in potential. These results lay the foundation for the photodetection applicatioins of graphene/Si heterojunction in the longer-wavelength infrared region.

[The Influence of New Medium with RGD on Cell Growth,Cell Fusion and Expression of Exogenous Gene].

OBJECTIVE: To investigate the influence of a new culture medium added with RGD on cell growth,cell fusion and expression of exogenous gene. METHODS: A new medium was prepared by adding different concentrations of RGD to ordinary culture medium. The optimum concentration of RGD was determined by observation of the growth of human pancreatic epithelial cell line HPDE6-C7. After determining the optimum concentration of RGD,different concentrations of cells HPDE6-C7 (5×104,105,5×105 mL－1) were inoculated in the two mediums. The morphology,adherence,growth and density of the cells were observed by inverted microscope; The ratio of clone formation and the positive rate of cloning were compared between the two cultures after fusion; The fluorescence intensity after the transfection of plasmid with green fluorescent protein (GFP) and the protein expression after transfection of plasmid with KRAS were observed to campare the expression of exogenous genes between the new medium with ordinary medium. RESULTS: Firstly,the optimal concentration of RGD was 10 ng/mL. Compared with the normal medium,the cultured cells with RGD had better morphology,adhesion and faster proliferation. In addition,both of the number and positive rate of clones formed in the new medium were significantly higher than that in the ordinary medium (P<0.05);The fluorescence intensity after transfection of exogenous gene GFP in the new medium was significantly higher than that in normal medium (P<0.05); Expression level of exogenous gene KRAS of the new medium was also significantly higher than that in normal medium. CONCLUSION: The new culture medium has highlighted advantages in cell growth,cell fusion and expression of exogenous genes. RGD peptide has widely prospect and potential value in the cell culture.

Three-dimensional conformal graphene microstructure for flexible and highly sensitive electronic skin.

We demonstrate a highly stretchable electronic skin (E-skin) based on the facile combination of microstructured graphene nanowalls (GNWs) and a polydimethylsiloxane (PDMS) substrate. The microstructure of the GNWs was endowed by conformally growing them on the unpolished silicon wafer without the aid of nanofabrication technology. Then a stamping transfer method was used to replicate the micropattern of the unpolished silicon wafer. Due to the large contact interface between the 3D graphene network and the PDMS, this type of E-skin worked under a stretching ratio of nearly 100%, and showed excellent mechanical strength and high sensitivity, with a change in relative resistance of up to 6500% and a gauge factor of 65.9 at 99.64% strain. Furthermore, the E-skin exhibited an obvious highly sensitive response to joint movement, eye movement and sound vibration, demonstrating broad potential applications in healthcare, body monitoring and wearable devices.

Flexible electrochemical biosensors based on graphene nanowalls for the real-time measurement of lactate.

We demonstrate a flexible biosensor for lactate detection based on l-lactate oxidase immobilized by chitosan film cross-linked with glutaraldehyde on the surface of a graphene nanowall (GNW) electrode. The oxygen-plasma technique was developed to enhance the wettability of the GNWs, and the strength of the sensor's oxidation response depended on the concentration of lactate. First, in order to eliminate interference from other substances, biosensors were primarily tested in deionized water and displayed good electrochemical reversibility at different scan rates (20-100 mV s-1), a large index range (1.0 µM to 10.0 mM) and a low detection limit (1.0 µM) for lactate. Next, these sensors were further examined in phosphate buffer solution (to mimick human body fluids), and still exhibited high sensitivity, stability and flexibility. These results show that the GNW-based lactate biosensors possess important potential for application in clinical analysis, sports medicine and the food industry.

CD300LG improves the cytotoxic activity of CIK.

To investigate the effect of CD300LG-γ induction on the cytotoxic activity of CIK. Eukaryotic expression plasmid hCD300LG-γ/pEGFP-C3, which can express human CD300LG-γ, was constructed and transfected into CHO cells by lipofectamine. The expression of CD300LG-γ was confirmed by immunofluorescence, RT-PCR, and Western Blot. To produce CIK cells, human peripheral blood mononuclear cells (PBMC) were isolated and induced, respectively, by cell lysates extracted from hCD300LG-γ/CHO cells, pEGFP-C3/CHO cells, and CHO cells, concurrently with the standard CIK inductive agent. The cytotoxic activity of these CIK cells against hCD300LG-γ/CHO cells, pEGFP-C3/CHO cells, CHO cells, and K562 cells was tested. The results showed that eukaryotic expression of plasmid hCD300LG-γ/pEGFP-C3 was constructed and transfected into CHO cells successfully. After being induced by cell lysates, the cytotoxicity of hCD300LG-γ/CHO-CIK was improved compared with the other CIK cells. In particular, the activity of killing pEGFP-C3/CHO and CHO cells was improved significantly. Meanwhile, the activity of hCD300LG-γ/CHO-CIK killing K562 was improved significantly compared with the other CIK cells. The results indicated that hCD300LG-γ induction can significantly improve the killing activity of CIK cells.

MiR-139-5p inhibits HGTD-P and regulates neuronal apoptosis induced by hypoxia-ischemia in neonatal rats.

Human growth transformation dependent protein (HGTD-P) is a newly identified protein that promotes neuronal apoptosis in hypoxia-ischemia brain damage (HIBD) in neonatal rats. However, the mechanisms regulating HGTD-P expression are not clear. Here we describe microRNAs targeted to HGTD-P and examine their effects on regulating neuronal apoptosis in HIBD. We use samples from cultured neurons after oxygen-glucose deprivation (OGD) and postnatal day 10 rat brains after hypoxia-ischemia (HI). RT-PCR, Western blotting, and immunostaining are used to detect the expression of HGTD-P and cleaved caspase 3, as well as real-time PCR detects microRNA expression. MicroRNA agomir is used to inhibit the expression of HGTD-P, and DAPI, TUNEL, and TTC staining are employed to detect cell apoptosis and brain damage. Moreover, in vitro processing assay is used to examine the mechanism by which HI down-regulates miR-139-5p expression. We found that miR-139-5p is down-regulated in neurons and rat brains after HI treatment. The expression pattern of miR-139-5p correlates inversely with that of HGTD-P. Furthermore, miR-139-5p agomir inhibits neuronal apoptosis and attenuates HIBD, which is concurrent with down-regulation of HGTD-P. Moreover, pre-miR-139 processing activity decreases in extracts from OGD neurons, and OGD neuronal extracts attenuates the processing of pre-miR-139 by Dicer. In conclusion, HI induces inhibitors which block the processing step of pre-miR-139, resulting in the down-regulation of mature miR-139-5p. The down-regulation of miR-139-5p plays a critical role in the up-regulation of HGTD-P expression. MiR-139-5p agomir attenuates brain damage when used 12h after HI, providing a longer therapeutic window than anti-apoptosis compounds currently available.

Phytohemagglutinin from Phaseolus vulgaris enhances the lung cancer cell chemotherapy sensitivity by changing cell membrane permeability.

Chemotherapy is still a prevalent strategy for clinical lung cancer treatment. However, the inevitable emerged drug resistance has become a great hurdle to therapeutic effect. Studies have demonstrated that the primary cause of drug resistance is a decrease in the chemotherapeutic medicine concentration. Several lectins have been confirmed to be effective as chemotherapy adjuvants, enhancing the anti-tumor effects of chemotherapy drugs. Here, we combined phytohemagglutinin (PHA), which has been reported possess anti-tumor effects, with chemotherapy drugs Cisplatin (DDP) and Adriamycin (ADM) on lung cancer cells to detect the sensitivities of PHA as a chemotherapy adjuvant. Our results demonstrated that the PHA significantly enhanced the sensitivity of lung cancer cells to DDP and ADM, and Western blot showed that PHA combined with DDP or ADM enhance cytotoxic effects by inhibiting autophagy and promoting apoptosis. More importantly, we found PHA enhanced the chemotherapeutic drugs cytotoxicity by changing the cell membrane to increase the intracellular chemotherapeutic drugs concentration. Besides, the combination of PHA and ADM increased the ADM concentration in the multidrug-resistant strain A549-R cells and achieved the drug sensitization effect. Our results suggest that PHA combined with chemotherapy can be applied in the treatment of lung cancer cells and lung cancer multidrug-resistant strains, and provide a novel strategy for clinical tumor chemotherapy and a new idea to solve the problem of drug resistance in clinical lung cancer.

Artificial Tactile Receptor System for Sensitive Pressure-Neural Spike Conversion.

An artificial tactile receptor is crucial for e-skin in next-generation robots, mimicking the mechanical sensing, signal encoding, and preprocessing functionalities of human skin. In the neural network, pressure signals are encoded in spike patterns and efficiently transmitted, exhibiting low power consumption and robust tolerance for bit error rates. Here, we introduce a highly sensitive artificial tactile receptor system integrating a pressure sensor, axon-hillock circuit, and neurotransmitter release device to achieve pressure signal coding with patterned spikes and controlled neurotransmitter release. Owing to the heightened sensitivity of the axon-hillock circuit to pressure-mediated current signals, the artificial tactile receptor achieves a detection limit of 10 Pa that surpasses the human tactile receptors, with a wide response range from 10 to 5 × 105 Pa. Benefiting from the appreciable pressure-responsive performance, the potential application of an artificial tactile receptor in robotic tactile perception has been demonstrated, encompassing tasks such as finger touch and human pulse detection.

Highly efficient recognition of similar objects based on ionic robotic tactile sensors.

Tactile sensing provides robots the ability of object recognition, fine operation, natural interaction, etc. However, in the actual scenario, robotic tactile recognition of similar objects still faces difficulties such as low efficiency and accuracy, resulting from a lack of high-performance sensors and intelligent recognition algorithms. In this paper, a flexible sensor combining a pyramidal microstructure with a gradient conformal ionic gel coating was demonstrated, exhibiting excellent signal-to-noise ratio (48 dB), low detection limit (1 Pa), high sensitivity (92.96 kPa-1), fast response time (55 ms), and outstanding stability over 15,000 compression-release cycles. Furthermore, a Pressure-Slip Dual-Branch Convolutional Neural Network (PSNet) architecture was proposed to separately extract hardness and texture features and perform feature fusion. In tactile experiments on different kinds of leaves, a recognition rate of 97.16 % was achieved, and surpassed that of human hands recognition (72.5 %). These researches showed the great potential in a broad application in bionic robots, intelligent prostheses, and precise human-computer interaction.