Combining binding pocket mutagenesis and substrate tunnel engineering to improve an (R)-selective transaminase for the efficient synthesis of (R)-3-aminobutanol.

(R)-selective transaminases have the potential to act as efficient biocatalysts for the synthesis of important pharmaceutical intermediates. However, their low catalytic efficiency and unfavorable equilibrium limit their industrial application. Seven (R)-selective transaminases were identified using homologous sequence mining. Beginning with the optimal candidate from Mycolicibacterium hippocampi, virtual mutagenesis and substrate tunnel engineering were performed to improve catalytic efficiency. The obtained variant, T282S/Q137E, exhibited 3.68-fold greater catalytic efficiency (kcat/Km) than the wild-type enzyme. Using substrate fed-batch and air sweeping processes, effective conversion of 100 mM 4-hydroxy-2-butanone was achieved with a conversion rate of 93 % and an ee value > 99.9 %. This study provides a basis for mutation of (R)-selective transaminases and offers an efficient biocatalytic process for the asymmetric synthesis of (R)-3-aminobutanol.

Multidimensional engineering of Saccharomyces cerevisiae for the efficient production of heme by exploring the cytotoxicity and tolerance of heme.

Heme has attracted considerable attention due to its indispensable biological roles and applications in healthcare and artificial foods. The development and utilization of edible microorganisms instead of animals to produce heme is the most promising method to promote the large-scale industrial production and safe application of heme. However, the cytotoxicity of heme severely restricts its efficient synthesis by microorganisms, and the cytotoxic mechanism is not fully understood. In this study, the effect of heme toxicity on Saccharomyces cerevisiae was evaluated by enhancing its synthesis using metabolic engineering. The results showed that the accumulation of heme after the disruption of heme homeostasis caused serious impairments in cell growth and metabolism, as demonstrated by significantly poor growth, mitochondrial damage, cell deformations, and chapped cell surfaces, and these features which were further associated with substantially elevated reactive oxygen species (ROS) levels within the cell (mainly H2O2 and superoxide anion radicals). To improve cellular tolerance to heme, 5 rounds of laboratory evolution were performed, increasing heme production by 7.3-fold and 4.2-fold in terms of the titer (38.9 mg/L) and specific production capacity (1.4 mg/L/OD600), respectively. Based on comparative transcriptomic analyses, 32 genes were identified as candidates that can be modified to enhance heme production by more than 20% in S. cerevisiae. The combined overexpression of 5 genes (SPS22, REE1, PHO84, HEM4 and CLB2) was shown to be an optimal method to enhance heme production. Therefore, a strain with enhanced heme tolerance and ROS quenching ability (R5-M) was developed that could generate 380.5 mg/L heme with a productivity of 4.2 mg/L/h in fed-batch fermentation, with S. cerevisiae strains being the highest producers reported to date. These findings highlight the importance of improving heme tolerance for the microbial production of heme and provide a solution for efficient heme production by engineered yeasts.

Engineering an (R)-selective transaminase for asymmetric synthesis of (R)-3-aminobutanol.

(R)-selective transaminases show promise as catalysts for the asymmetric synthesis of chiral amines, which are building blocks of various small molecule drugs. However, their application is limited by poor substrate acceptance and low catalytic efficiency. Here, a potential (R)-selective transaminase from Fodinicurvata sediminis (FsTA) was identified through a substrate truncating strategy, and used as starting point for enzyme engineering toward catalysis of 4-hydroxy-2-butanone, a substrate that poses challenges in catalysis. Molecular docking and dynamics simulations revealed Y90 as the key residue responsible for poor substrate binding. Starting from the variant (Y90F, mut1) with initial activity, FsTA was systematically modified to improve substrate-binding through active site reshaping and consensus sequence strategy, yielding three variants (H30R, V152K, and Y156F) with improved activity. A quadruple mutation variant H30R/Y90F/V152K/Y156F (mut4) was also found to show a 7.95-fold greater catalytic efficiency (kcat/KM) than the initial variant mut1. Furthermore, mut4 also enhanced the thermostability of enzyme significantly, with the Tm value increasing by 10 °C. This variant also exhibited significantly improved activity toward a series of ketones that are either not accepted or poorly accepted by the wild-type. This study provides a basis for the rational design of an active to creating variants that can accommodate novel substrates.

Identification and evolution of non-traditional nitrilase from Spirosoma linguale DSM 74 with high hydration activity.

Hydration, a secondary activity mediated by nitrilase, is a promising new pathway for amide production. However, low hydration activity of nitrilase or trade-off between hydration and catalytic activity hinders its application in the production of amides. Here, natural C-terminal-truncated wild-type nitrilase, mined from a public database, obtained a high-hydration activity nitrilase as a novel evolutionary starting point for further protein engineering. The nitrilase Nit-74 from Spirosoma linguale DSM 74 was successfully obtained and exhibited the highest hydration activity level, performing 50.7 % nicotinamide formation and 87.6 % conversion to 2 mM substrate 3-cyanopyridine. Steric hindrance of the catalytic activity center and the N-terminus of the catalytic cysteine residue helped us identify three key residues: I166, W168, and T191. Saturation mutations resulted in three single mutants that further improved the hydration activity of N-heterocyclic nitriles. Among them, the mutant T191S performed 72.7 % nicotinamide formation, which was much higher than the previously reported highest level of 18.7 %. Additionally, mutants I166N and W168Y exhibited a 97.5 % 2-picolinamide ratio and 97.7 % isonicotinamide ratio without any loss of catalytic activity, which did not indicate a trade-off effect. Our results expand the screening and evolution library of promiscuous nitrilases with high hydration activity for amide formation.

CRISPR/Cas9-based toolkit for rapid marker recycling and combinatorial libraries in Komagataella phaffii.

Komagataella phaffii, a nonconventional yeast, is increasingly attractive to researchers owing to its posttranslational modification ability, strict methanol regulatory mechanism, and lack of Crabtree effect. Although CRISPR-based gene editing systems have been established in K. phaffii, there are still some inadequacies compared to the model organism Saccharomyces cerevisiae. In this study, a redesigned gRNA plasmid carrying red and green fluorescent proteins facilitated plasmid construction and marker recycling, respectively, making marker recycling more convenient and reliable. Subsequently, based on the knockdown of Ku70 and DNA ligase IV, we experimented with integrating multiple DNA fragments at a single locus. A 26.5-kb-long DNA fragment divided into 11 expression cassettes for lycopene synthesis could be successfully integrated into a single locus at one time with a success rate of 57%. A 27-kb-long DNA fragment could also be precisely knocked out with a 50% positive rate in K. phaffii by introducing two DSBs simultaneously. Finally, to explore the feasibility of rapidly balancing the expression intensity of multiple genes in a metabolic pathway, a yeast combinatorial library was successfully constructed in K. phaffii using lycopene as an indicator, and an optimal combination of the metabolic pathway was identified by screening, with a yield titer of up to 182.73 mg/L in shake flask fermentation. KEY POINTS: • Rapid marker recycling based on the visualization of a green fluorescent protein • One-step multifragment integration and large fragment knockout in the genome • A random assembly of multiple DNA elements to create yeast libraries in K. phaffii.

Computer-aided rational design strategy based on protein surface charge to improve the thermal stability of a novel esterase from Geobacillus jurassicus.

OBJECTIVES: Although Geobacillus are significant thermophilic bacteria source, there are no reports of thermostable esterase gene in Geobacillus jurassicus or rational design strategies to increase the thermal stability of esterases. RESULTS: Gene gju768 showed a highest similarity of 15.20% to esterases from Geobacillus sp. with detail enzymatic properties. Using a combination of Gibbs Unfolding Free Energy (∆∆G) calculator and the distance from the mutation site to the catalytic site (DsCα-Cα) to screen suitable mutation sites with elimination of negative surface charge, the mutants (D24N, E221Q, and E253Q) displayed stable mutants with higher thermal stability than the wild-type (WT). Mutant E253Q exhibited the best thermal stability, with a half-life (T1/2) at 65 °C of 32.4 min, which was 1.8-fold of the WT (17.9 min). CONCLUSION: Cloning of gene gju768 and rational design based on surface charge engineering contributed to the identification of thermostable esterase from Geobacillus sp. and the exploration of evolutionary strategies for thermal stability.

Construction of RNA silencing system of Penicillium brevicompactum and genetic manipulation of the regulator pbpcz in mycophenolic acid production.

Penicillium brevicompactum is a critical industrial strain for the production of mycophenolic acid (MPA). However, the genetic background of Penicillium brevicompactum is unclear, and there are few tools available for genetic manipulation. To investigate its gene function, we first verified the feasibility of a pair of citrate synthase promoter (Pcit) and terminator (Tcit) from P. brevicompactum by constructing a fluorescent expression cassette. Based on this, an RNAi vector was designed and constructed with reverse promoters. This study focused on the functional investigation of the pbpcz gene in P. brevicompactum, a regulator belonging to the Zn(II)2Cys6 family. RNAi was used to silence the pbpcz gene, providing a valuable tool for genetic studies in P. brevicompactum. After seven days, we observed differences in the number of spores between different phenotypes strains of pbpcz gene. Compared to the wild-type strain (WT), the spore yield of the pbpcz gene silencing mutant (M2) was only 51.4 %, while that of the pbpcz gene overexpressed mutant (SE4) was increased by 50 %. Expression levels of the three genes (brlA, abaA, and wetA) comprising conidia's central regulatory pathway were significantly reduced in the pbpcz gene silencing mutant, while fluorescence localization showed that PbPCZ protein was mainly distributed in spores. The results indicated that the pbpcz gene is critical for conidia and asexual development of P. brevicompactum. In addition, overexpressing the pbpcz gene resulted in a 30.3 % increase in MPA production compared to the wild type, with a final yield of 3.57 g/L. These results provide evidence that PbPCZ acts as a positive regulator in P. brevicompactum, controlling MPA production and regulating conidia and asexual development.

Enhancing the Activity of an Alcohol Dehydrogenase by Using "Aromatic Residue Scanning" at Potential Plasticity Sites.

An alcohol dehydrogenase LkADH was successfully engineered to exhibit improved activity and substrate tolerance for the production of (S)-2-chloro-1-(3,4-difluorophenyl)ethanol, an important precursor of ticagrelor. Five potential hotspots were identified for enzyme mutagenesis by using natural residue abundance as an indicator to evaluate their potential plasticity. A semi-rational strategy named "aromatic residue scanning" was applied to randomly mutate these five sites simultaneously by using tyrosine, tryptophan, and phenylalanine as "exploratory residues" to introduce steric hindrance or potential π-π interactions. The best variant Lk-S96Y/L199W identified with 17.2-fold improvement in catalytic efficiency could completely reduce up to 600 g/L (3.1 M) 2-chloro-1-(3,4-difluorophenyl)ethenone in 12 h with >99.5 % ee, giving the highest space-time yield ever reported. This study, therefore, offers a strategy for mutating alcohol dehydrogenase to reduce aromatic substrates and provides an efficient variant for the efficient synthesis of (S)-2-chloro-1-(3,4-difluorophenyl)ethanol.

Improved cryptic plasmids in probiotic Escherichia coli Nissle 1917 for antibiotic-free pathway engineering.

The engineered probiotic Escherichia coli Nissle 1917 (EcN) is expected to be employed in the diagnosis and treatment of various diseases. However, the introduced plasmids typically require antibiotics to maintain genetic stability, and the cryptic plasmids in EcN are usually eliminated to avoid plasmid incompatibility which may change the inherent probiotic characteristics. Here, we provided a simple design to minimize the genetic change of probiotics by eliminating native plasmids and reintroducing the recombinants carrying functional genes. Specific insertion sites in the vectors showed significant differences in the expression of fluorescence proteins. Selected integration sites were applied in the de novo synthesis of salicylic acid, leading to a titer of 142.0 ± 6.0 mg/L in a shake flask with good production stability. Additionally, the design successfully realized the biosynthesis of ergothioneine (45 mg/L) by one-step construction. This work expands the application scope of native cryptic plasmids to the easy construction of functional pathways. KEY POINTS: • Cryptic plasmids of EcN were designed to express exogenous genes • Insertion sites with different expression intensities in cryptic plasmids were provided • Target products were stably produced by engineering cryptic plasmids.

Engineering Escherichia coli for l-homoserine production.

l-homoserine, a nonprotein amino acid, is used to synthesize many active substances in the industry. Here, to develop a robust l-homoserine-producing strain, Escherichia coli W3110 was used as a chassis to be engineered. Based on a previous construct with blocked competing routes for l-homoserine synthesis, five genes were overexpressed by promoter replacement strategy to increase the l-homoserine production, including enhancement of precursors for l-homoserine synthesis (ppc, thrA, and asd), reinforcement of the NADPH supply (pntAB) and efflux transporters (rhtA) to improve the l-homoserine production. However, the plasmid losing was to blame for the wildly fluctuating fermentation performance of engineered strains, ranging between 2.1 and 6.2 g/L. Then, a hok/sok toxin/antitoxin system was introduced into the free plasmid expression cassette to maintain the genetic stability of the episomal plasmid; consequently, the plasmid-losing rate sharply decreased, resulting in the engineered strain SHL17, which exhibited excellent stability in l-homoserine production, with 6.3 g/L in shake flasks and 44.4 g/L in a 5-L fermenter without antibiotic addition. This work verified the effective use of the hok/sok toxin/antitoxin system combined with promoter engineering to improve the genetic stability of E. coli episomal plasmids without antibiotics.

The novel repressor Rce2 competes with Ace3 to regulate cellulase gene expression in the filamentous fungus Trichoderma reesei.

The filamentous fungus Trichoderma reesei is widely used for industrial cellulase production. In T. reesei, cellulase gene expression is tightly controlled by a regulatory network involving multiple transcription factors. Here, we isolated a novel protein, Rce2, using a pull-down assay and mass spectrometry analysis, from a partial carbon catabolite de-repression mutant, T. reesei Rut-C30, cultured under glucose-repressing conditions. Deletion and overexpression of Rce2 in T. reesei wild-type QM6a and mutant Rut-C30 revealed that Rce2 acts as a repressor of cellulase gene expression. DNase I footprinting assays, electrophoretic mobility shift assays, and chromatin immunoprecipitation assays revealed that Rce2 was located in the nucleus and bound to the consensus sequences 5'-(T/A)NNNNCCG-3' and 5'-CGGNNNN(T/A)-3' in the promoters of cellulase-related genes to repress their transcription. Additionally, Rce2 antagonized Ace3 binding to the cbh1 promoter to repress its transcription. However, Rce2 was not involved in Cre1-mediated carbon catabolite repression. These results demonstrate the mechanism through which Rce2 represses the expression of cellulase genes and provide novel insights into the regulatory system of cellulases and methods that can be used for the regulation of gene expression in T. reesei.

Overexpression of mGDH in Gluconobacter oxydans to improve D-xylonic acid production from corn stover hydrolysate.

BACKGROUND: D-Xylonic acid is a versatile platform chemical with broad potential applications as a water reducer and disperser for cement and as a precursor for 1,4-butanediol and 1,2,4-tributantriol. Microbial production of D-xylonic acid with bacteria such as Gluconobacter oxydans from inexpensive lignocellulosic feedstock is generally regarded as one of the most promising and cost-effective methods for industrial production. However, high substrate concentrations and hydrolysate inhibitors reduce xylonic acid productivity. RESULTS: The D-xylonic acid productivity of G. oxydans DSM2003 was improved by overexpressing the mGDH gene, which encodes membrane-bound glucose dehydrogenase. Using the mutated plasmids based on pBBR1MCS-5 in our previous work, the recombinant strain G. oxydans/pBBR-R3510-mGDH was obtained with a significant improvement in D-xylonic acid production and a strengthened tolerance to hydrolysate inhibitors. The fed-batch biotransformation of D-xylose by this recombinant strain reached a high titer (588.7 g/L), yield (99.4%), and volumetric productivity (8.66 g/L/h). Moreover, up to 246.4 g/L D-xylonic acid was produced directly from corn stover hydrolysate without detoxification at a yield of 98.9% and volumetric productivity of 11.2 g/L/h. In addition, G. oxydans/pBBR-R3510-mGDH exhibited a strong tolerance to typical inhibitors, i.e., formic acid, furfural, and 5-hydroxymethylfurfural. CONCLUSION: Through overexpressing mgdh in G. oxydans, we obtained the recombinant strain G. oxydans/pBBR-R3510-mGDH, and it was capable of efficiently producing xylonic acid from corn stover hydrolysate under high inhibitor concentrations. The high D-xylonic acid productivity of G. oxydans/pBBR-R3510-mGDH made it an attractive choice for biotechnological production.

One-pot biosynthesis of 7ß-hydroxyandrost-4-ene-3,17-dione from phytosterols by cofactor regeneration system in engineered mycolicibacterium neoaurum.

BACKGROUND: 7ß-hydroxylated steroids (7ß-OHSt) possess significant activities in anti-inflammatory and neuroprotection, and some of them have been widely used in clinics. However, the production of 7ß-OHSt is still a challenge due to the lack of cheap 7ß-hydroxy precursor and the difficulty in regio- and stereo-selectively hydroxylation at the inert C7 site of steroids in industry. The conversion of phytosterols by Mycolicibacterium species to the commercial precursor, androst-4-ene-3,17-dione (AD), is one of the basic ways to produce different steroids. This study presents a way to produce a basic 7ß-hydroxy precursor, 7ß-hydroxyandrost-4-ene-3,17-dione (7ß-OH-AD) in Mycolicibacterium, for 7ß-OHSt synthesis. RESULTS: A mutant of P450-BM3, mP450-BM3, was mutated and engineered into an AD producing strain for the efficient production of 7ß-OH-AD. The enzyme activity of mP450-BM3 was then increased by 1.38 times through protein engineering and the yield of 7ß-OH-AD was increased from 34.24 mg L- 1 to 66.25 mg L- 1. To further enhance the performance of 7ß-OH-AD producing strain, the regeneration of nicotinamide adenine dinucleotide phosphate (NADPH) for the activity of mP450-BM3-0 was optimized by introducing an NAD kinase (NADK) and a glucose-6-phosphate dehydrogenase (G6PDH). Finally, the engineered strain could produce 164.52 mg L- 1 7ß-OH-AD in the cofactor recycling and regeneration system. CONCLUSIONS: This was the first report on the one-pot biosynthesis of 7ß-OH-AD from the conversion of cheap phytosterols by an engineered microorganism, and the yield was significantly increased through the mutation of mP450-BM3 combined with overexpression of NADK and G6PDH. The present strategy may be developed as a basic industrial pathway for the commercial production of high value products from cheap raw materials.

SAC-TRAIL, a novel anticancer fusion protein: expression, purification, and functional characterization.

Recombinant protein pharmaceutical agents have been widely used for cancer treatment. Although tumor necrosis factor-related apoptosis-inducing ligand (TRAIL) has broad-spectrum antitumor activity, its clinical applications are limited because most tumor cells eventually develop resistance to TRAIL-induced apoptosis through various pathways. Prostate apoptosis response-4 (Par-4) selectively induces apoptosis in cancer cells after binding to the cell surface receptor, GRP78. In this study, TRAIL was fused with the core domain of Par-4 (SAC) to produce a novel recombinant fusion protein. To obtain solubly expressed fusion protein, a small ubiquitin-related modifier (SUMO) was added to the N-terminus of the target protein. Cytotoxicity assays showed that the purified fusion protein exhibited more significant antitumor activity on cancer cells than that by native TRAIL. The connection order and linker sequence of the fusion proteins were optimized. In vitro cytotoxicity assay showed that the SAC-TRAIL fusion protein, which contained a flexible linker (G4S)3, optimally inhibited the proliferation of cancer cells. Immunofluorescence assays demonstrated that SAC-TRAIL could efficiently and specifically bind to cancer cells. Additionally, circular dichroism assays showed that the secondary structure of the recombinant protein with a flexible linker (G4S)3 has both a lower α-helix and higher random coiling, which facilitates the specific binding of SAC-TRAIL to the receptor. Collectively, these results suggest that the novel recombinant fusion protein SAC-(G4S)3-TRAIL is a potential therapeutic agent for cancer. KEY POINTS: • Improved tumor growth suppression and apoptosis induction potency of SAC-TRAIL. • Enhanced targeting selectivity of SAC-TRAIL in cancer cells. • Lower α-helix and higher random coiling in SAC-TRAIL with flexible linker (G4S)3.

Economic optimization of expression of soluble human epidermal growth factor in Escherichia coli.

Human epidermal growth factor (hEGF) has multiple biological functions, such as promoting cell proliferation, differentiation, and migration. In addition, it is a very expensive polypeptide with attractive market prospects. However, the production of hEGF needs for high cost to manufacture polypeptide demands reinvestigations of process conditions so as to enhance economic benefits. Improving the expression of soluble hEGF is the fundamental method to reduce the cost. In this study, a non-extracellular engineered strain of expressed hEGF was constructed, using plasmid pET-22b(+) in Escherichia coli. Preliminary fermentation and high cell density cultivation were carried out in shake flasks and in a 5 L bioreactor, respectively. A high yield of 98 ± 10 mg/L of soluble hEGF and a dry cell weight (DCW) of 6.98 ± 0.3 g/L were achieved in shake flasks. Then, fermentation conditions were optimized for large-scale production, while taking into consideration the expensive equipment required for cooling and conforming to industrial standards. A yield of 285 ± 10 mg/L of soluble hEGF, a final cell density of 57.4 ± 2 g/L DCW (OD600 141.1 ± 4.9), and hEGF productivity of 14.3 mg/L/h were obtained using a bioreactor at 32 °C for 20 h. The production method developed in this study for the biosynthesis of soluble hEGF is efficient and inexpensive.

Screening and characterization of a nitrilase with significant nitrile hydratase activity.

PURPOSE: We screened nitrilases with significant nitrile hydratase activity to exploit their potential in benzylic amide biosynthesis. We also investigated the factors affecting their hydration activity to support further research on benzylic amide production by nitrilase. METHODS: A sequence-based screening method using previously reported crucial positions identified to be essential for amide-forming capacity of nitrilase (referred to as "amide-formation hotspots") as molecular probes to identify putative amide-forming nitrilases. RESULTS: Based on the previously reported "amide-formation hotspots," we identified a nitrilase NitPG from Paraburkholderia graminis DSM 17151 that could produce a significant amount of mandelamide toward mandelonitrile and exhibited general hydration activity toward various benzylic nitriles. The time-course experiment with NitPG demonstrated that amide was also a true reaction product of nitrilase, suggesting that the nitrile catalysis by amide-forming nitrilase could be a post-transition state bifurcation-mediated enzymatic reaction. Further research demonstrated that low temperature, metal ion addition, and specific substrate structure could profoundly improve the amide formation capability of nitrilase. CONCLUSIONS: NitPG with broad hydration activity is a potential candidate for the enzymatic synthesis of benzylic amides for biotechnological applications. Studying the effect of nitrilase hydration activity could promote our understanding of the factors that influence amide and acid distribution.

Production of sesquiterpene patchoulol in mitochondrion-engineered Saccharomyces cerevisiae.

Patchoulol is a natural sesquiterpene, which is widely used in perfumes and cosmetics. In the work, the mitochondria of S. cerevisiae were engineered for patchoulol production. The patchoulol titer of mitochondria-compartmentalized strain (1.79 mg/L) was 2.71-fold higher than that of control strain (0.66 mg/L) using genome-integrated patchoulol synthase, indicating that mitochondria compartmentation resulted in higher concentration of FPP (farnesyl pyrophosphate) precursor for patchoulol production. Moreover, when fused FPP synthase and patchoulol synthase was overexpressed in the strain with a mitochondria-localized DMAPP (dimethylallyl diphosphate) pathway, the production of patchoulol increased significantly to 19.24 mg/L, indicating more precursors were provided for patchoulol production. Nevertheless, the introduction of excess foreign proteins into mitochondria might cause a certain stress on mitochondria and showed a negative effect on the growth of yeast cells, which could hinder the expression of foreign pathways and reduce the patchoulol production. In conclusion, mitochondria-engineered yeast cells showed important potential for the enhanced biosynthesis of patchoulol, and further engineering could be considered based on the present work.

Mechanism-Guided Computational Design of ω-Transaminase by Reprograming of High-Energy-Barrier Steps.

ω-Transaminases (ω-TAs) show considerable potential for the synthesis of chiral amines. However, their low catalytic efficiency towards bulky substrates limits their application, and complicated catalytic mechanisms prevent precise enzyme design. Herein, we address this challenge using a mechanism-guided computational enzyme design strategy by reprograming the transition and ground states in key reaction steps. The common features among the three high-energy-barrier steps responsible for the low catalytic efficiency were revealed using quantum mechanics (QM). Five key residues were simultaneously tailored to stabilize the rate-limiting transition state with the aid of the Rosetta design. The 14 top-ranked variants showed 16.9-143-fold improved catalytic activity. The catalytic efficiency of the best variant, M9 (Q25F/M60W/W64F/I266A), was significantly increased, with a 1660-fold increase in kcat /Km and a 1.5-26.8-fold increase in turnover number (TON) towards various indanone derivatives.

Metabolic compartmentalization in yeast mitochondria: Burden and solution for squalene overproduction.

Harnessing mitochondria is considered as a promising method for biosynthesis of terpenes due to the adequate supply of acetyl-CoA and redox equivalents in mitochondria. However, mitochondrial engineering often causes serious metabolic burden indicated by poor cell growth. Here, we systematically analyzed the metabolic burden caused by the compartmentalization of the MVA pathway in yeast mitochondria for squalene synthesis. The phosphorylated intermediates of the MVA pathway, especially mevalonate-5-P and mevalonate-5-PP, conferred serious toxicity within mitochondria, which significantly compromised its possible advantages for squalene synthesis and was difficult to be significantly improved by routine pathway optimization. These phosphorylated intermediates were converted into ATP analogues, which strongly inhibited ATP-related cell function, such as mitochondrial oxidative respiration. Fortunately, the introduction of a partial MVA pathway from acetyl-CoA to mevalonate in mitochondria as well as the augmentation of the synthesis of mevalonate in cytosol could significantly promote the growth of yeasts. Accordingly, a combinatorial strategy of cytoplasmic and mitochondrial engineering was proposed to alleviate the metabolic burden caused by the compartmentalized MVA pathway in mitochondria and improve cell growth. The strategy also displayed the superimposed effect of cytoplasmic engineering and mitochondrial engineering on squalene production. Through a two-stage fermentation process, the squalene titer reached 21.1 g/L with a specific squalene titer of 437.1 mg/g dcw, which was the highest at present. This provides new insight into the production of squalene and other terpenes in yeasts based on the advantages of mitochondrial engineering.

Trichoderma reesei ACE4, a Novel Transcriptional Activator Involved in the Regulation of Cellulase Genes during Growth on Cellulose.

The filamentous fungus Trichoderma reesei is a model strain for cellulase production. Cellulase gene expression in T. reesei is controlled by multiple transcription factors. Here, we identified by comparative genomic screening a novel transcriptional activator, ACE4 (activator of cellulase expression 4), that positively regulates cellulase gene expression on cellulose in T. reesei. Disruption of the ace4 gene significantly decreased expression of four main cellulase genes and the essential cellulase transcription factor-encoding gene ace3. Overexpression of ace4 increased cellulase production by approximately 22% compared to that in the parental strain. Further investigations using electrophoretic mobility shift assays, DNase I footprinting assays, and chromatin immunoprecipitation assays indicated that ACE4 directly binds to the promoter of cellulase genes by recognizing the two adjacent 5'-GGCC-3' sequences. Additionally, ACE4 directly binds to the promoter of ace3 and, in turn, regulates the expression of ACE3 to facilitate cellulase production. Collectively, these results demonstrate an important role for ACE4 in regulating cellulase gene expression, which will contribute to understanding the mechanism underlying cellulase expression in T. reesei. IMPORTANCET. reesei is commonly utilized in industry to produce cellulases, enzymes that degrade lignocellulosic biomass for the production of bioethanol and bio-based products. T. reesei is capable of rapidly initiating the biosynthesis of cellulases in the presence of cellulose, which has made it useful as a model fungus for studying gene expression in eukaryotes. Cellulase gene expression is controlled through multiple transcription factors at the transcriptional level. However, the molecular mechanisms by which transcription is controlled remain unclear. In the present study, we identified a novel transcription factor, ACE4, which regulates cellulase expression on cellulose by binding to the promoters of cellulase genes and the cellulase activator gene ace3. Our study not only expands the general functional understanding of the novel transcription factor ACE4 but also provides evidence for the regulatory mechanism mediating gene expression in T. reesei.