Highly emissive green CsPbBr3/Cs4PbBr6 composites: formation kinetics, excellent heat, light, and polar solvent resistance, and flexible light-emitting application.

Benefit from their near-unity photoluminescence quantum yield (PL QY), narrow emission band, and widely tunable bandgap, metal halide perovskites have shown promising in light-emitting applications. Despite such promise, how to facile, environmentally-friendly, and large-scale prepare solid metal halide perovskite with high emission and stability remains a challenging. Herein, we demonstrate a convenient and environmentally-friendly method for the mass synthesis of solid CsPbBr3/Cs4PbBr6 composites using high-power ultrasonication. Adjusting key experimental parameters, bright emitting CsPbBr3/Cs4PbBr6 solids with a maximum PL QY of 71% were obtained within 30 min. XRD, SEM, TEM, Abs/PL, XPS, and lifetime characterizations provide solid evidence for forming CsPbBr3/Cs4PbBr6 composites. Taking advantage of these composites, the photostability, thermostability, and polar solvent stability of CsPbBr3/Cs4PbBr6 are much improved compared to CsPbBr3. We further demonstrated CsPbBr3/Cs4PbBr6 use in flexible/stretchable film and high-power WLEDs. After being subjected to bending, folding, and twisting, the film retains its bright emission and exhibits good resistance to mechanical deformation. Additionally, our WLEDs display a superior, durable high-power-driving capability, operating currents up to 300 mA and maintaining high luminous intensity for 50 hours. Such highly emissive and stable metal halide perovskites make them promising for solid-state lighting, lasing, and flexible/stretchable display device applications.

Maximum Spreading of Impacting Ferrofluid Droplets under the Effect of Nonuniform Magnetic Field.

This article investigates the maximum spreading of ferrofluid droplets impacting on a hydrophobic surface under nonuniform magnetic fields. A generalized model for scaling the maximum spreading is developed. It is observed that, if the magnetic field strength is zero, a ferrofluid droplet not only demonstrates similar spreading dynamics as the water droplet but also obeys the same scaling law for the maximum spreading factor. Therefore, this article emphasizes the effects of magnetic field strength. In this regard, a dimensionless parameter (Nm) is introduced as the ratio between inertial force and Kelvin force, with an assumption that the kinetic energy mainly transforms to thermal energy. This parameter allows us to rescale all experimental data on a single curve with the Padé approximant, which is applicable to a wide range of impact velocities and magnetic field strengths.

Highly Stable and Photoluminescent CsPbBr3/Cs4PbBr6 Composites for White-Light-Emitting Diodes and Visible Light Communication.

Inorganic lead halide perovskite is one of the most excellent fluorescent materials, and it plays an essential role in high-definition display and visible light communication (VLC). Its photochromic properties and stability determine the final performance of light-emitting devices. However, efficiently synthesizing perovskite with high quality and stability remains a significant challenge. Here, we develop a facile and environmentally friendly method for preparing high-stability and strong-emission CsPbBr3/Cs4PbBr6 composites using ultrasonication and liquid paraffin. Tuning the contents of liquid paraffin, bright-emission CsPbBr3/Cs4PbBr6 composite powders with a maximum PLQY of 74% were achieved. Thanks to the protection of the Cs4PbBr6 matrix and liquid paraffin, the photostability, thermostability, and polar solvent stability of CsPbBr3/Cs4PbBr6-LP are significantly improved compared to CsPbBr3 quantum dots and CsPbBr3/Cs4PbBr6 composites that were prepared without liquid paraffin. Moreover, the fabricated CsPbBr3/Cs4PbBr6-LP-based WLEDs show excellent luminescent performance with a power efficiency of 129.5 lm/W and a wide color gamut, with 121% of the NTSC and 94% of the Rec. 2020, demonstrating a promising candidate for displays. In addition, the CsPbBr3/Cs4PbBr6-LP-based WLEDs were also demonstrated in a VLC system. The results suggested the great potential of these high-performance WLEDs as an excitation light source to achieve VLC.

Precise regulation of the multicolor spectrum of carbon dots based on the bionic leaf vein ultrasonic microreactor.

Carbon dots (CDs) are a fascinating new type of fluorescent carbon nanomaterial with excellent photoelectric properties. However, preparing long-wavelength and multicolor-emitting CDs has been challenging, limiting their large-scale applications. Fortunately, a new efficient method has been proposed to co-regulate CDs' multicolor spectra using an ultrasonic microreactor. Inspired by plant leaves, a bionic vein microchannel was designed with good fluidity and high energy transfer efficiency. The optimal microchannel structural parameters were determined after investigating the effects of fractal angle, depth-to-width ratio, and inlet angle on the flow uniformity of the microchannel using numerical simulations. The efficiency of ultrasonic energy transfer was improved by directly coupling the microreactor and the sandwich transducer to fabricate the ultrasonic microreactor. Simulation results showed that the ultrasonic microreactor's vibration resonated along the longitudinal direction, and the ultrasonic intensity of the microreactor was maximal and uniform. A high-efficiency and controllable ultrasonic microreactor system was built to synthesize the CDs in situ. The influence of the ultrasound field intensity on CDs' preparation in a microreactor was simultaneously investigated to verify the ultrasound enhancement, and the PLQY of the high-performance CDs was found to be 83.1%. The CDs' multicolor spectra from the blue to the red region can be precisely tuned by adjusting key reaction parameters such as reaction temperature, flow rate, and precursor concentration. This new method shows promising applications in lighting, display, and other fields, making CDs a versatile and exciting new material to explore.

Multicolor Luminescent Carbon Dots: Tunable Photoluminescence, Excellent Stability, and Their Application in Light-Emitting Diodes.

Carbon dots (CDs) are attracting much interest due to their excellent photoelectric properties and wide range of potential applications. However, it is still a challenge to regulate their bandgap emissions to achieve full-color CDs with high emissions. Herein, we propose an approach for producing full-color emissive CDs by employing a solvent engineering strategy. By only tuning the volume ratio of water and dimethylformamide (H2O/DMF), the photoluminescence (PL) emission wavelengths of the CDs can be changed from 451 to 654 nm. Different fluorescence features of multicolor CDs were systematically investigated. XRD, SEM, TEM, Abs/PL/PLE, XPS, and PL decay lifetime characterizations provided conclusive evidence supporting the extent to which the solvent controlled the dehydration and carbonization processes of the precursors, leading to a variation in their emission color from red to blue. The as-prepared CDs exhibited excellent and stable fluorescence performance even after being heated at 80 °C for 48 h and with UV light continuously irradiated for 15 h. Based on their excellent fluorescent properties and photothermal stability, bright multicolor light-emitting diodes with a high CRI of up to 91 were obtained. We anticipate that these full-color emissive CDs are beneficial for applications in lighting, display, and other fields.

Overexpression of cassava RSZ21b enhances drought tolerance in Arabidopsis.

Drought is one of the major environmental constraints affecting crop productivity. Plants have to adjust their developmental and physiological processes to cope with drought. We previously identified 18 cassava serine/arginine-rich (SR) proteins that had a pivotal role in alternative splicing in response to environmental stress. However, functional characterization of SR proteins is rarely explored. Here, we characterized the RSZ subfamily gene MeRSZ21b in cassava. The RSZ21b belongs to the RSZ subfamily, which was widely distributed in major crops and was highly conserved. Quantitative RT-PCR assay showed that the expression of MeRSZ21b was significantly induced by drought. Moreover, overexpression of MeRSZ21b in Arabidopsis was hypersensitive to abscisic acid (ABA) in the phases of seed germination and post-germination seedling growth. Meantime, MeRSZ21b overexpression lines were resistant to sorbitol treatment, and quickly closed the stomata when compared with Col-0 under drought condition. Importantly, overexpression of MeRSZ21b resulted in improved drought tolerance through modulating ABA-dependent signaling. Therefore, our findings refine our knowledge of the SR protein-coding genes and provide novel insights for enhancing plant resistance to environmental stress.

Salt Stress Modulates the Landscape of Transcriptome and Alternative Splicing in Date Palm (Phoenix dactylifera L.).

Date palm regards as a valuable genomic resource for exploring the tolerance genes due to its ability to survive under the sever condition. Although a large number of differentiated genes were identified in date palm responding to salt stress, the genome-wide study of alternative splicing (AS) landscape under salt stress conditions remains unknown. In the current study, we identified the stress-related genes through transcriptomic analysis to characterize their function under salt. A total of 17,169 genes were differentially expressed under salt stress conditions. Gene expression analysis confirmed that the salt overly sensitive (SOS) pathway genes, such as PdSOS2;1, PdSOS2;2, PdSOS4, PdSOS5, and PdCIPK11 were involved in the regulation of salt response in date palm, which is consistent with the physiological analysis that high salinity affected the Na+/K+ homeostasis and amino acid profile of date palm resulted in the inhibition of plant growth. Interestingly, the pathway of "spliceosome" was enriched in the category of upregulation, indicating their potential role of AS in date palm response to salt stress. Expectedly, many differentially alternative splicing (DAS) events were found under salt stress conditions, and some splicing factors, such as PdRS40, PdRSZ21, PdSR45a, and PdU2Af genes were abnormally spliced under salt, suggesting that AS-related proteins might participated in regulating the salt stress pathway. Moreover, the number of differentially DAS-specific genes was gradually decreased, while the number of differentially expressed gene (DEG)-specific genes was increased with prolonged salt stress treatment, suggesting that AS and gene expression could be distinctively regulated in response to salt stress. Therefore, our study highlighted the pivotal role of AS in the regulation of salt stress and provided novel insights for enhancing the resistance to salt in date palm.

Construction of an ultrahigh-density genetic linkage map for Jatropha curcas L. and identification of QTL for fruit yield.

BACKGROUND: As an important biofuel plant, the demand for higher yield Jatropha curcas L. is rapidly increasing. However, genetic analysis of Jatropha and molecular breeding for higher yield have been hampered by the limited number of molecular markers available. RESULTS: An ultrahigh-density linkage map for a Jatropha mapping population of 153 individuals was constructed and covered 1380.58 cM of the Jatropha genome, with average marker density of 0.403 cM. The genetic linkage map consisted of 3422 SNP and indel markers, which clustered into 11 linkage groups. With this map, 13 repeatable QTLs (reQTLs) for fruit yield traits were identified. Ten reQTLs, qNF-1, qNF-2a, qNF-2b, qNF-2c, qNF-3, qNF-4, qNF-6, qNF-7a, qNF-7b and qNF-8, that control the number of fruits (NF) mapped to LGs 1, 2, 3, 4, 6, 7 and 8, whereas three reQTLs, qTWF-1, qTWF-2 and qTWF-3, that control the total weight of fruits (TWF) mapped to LGs 1, 2 and 3, respectively. It is interesting that there are two candidate critical genes, which may regulate Jatropha fruit yield. We also identified three pleiotropic reQTL pairs associated with both the NF and TWF traits. CONCLUSION: This study is the first to report an ultrahigh-density Jatropha genetic linkage map construction, and the markers used in this study showed great potential for QTL mapping. Thirteen fruit-yield reQTLs and two important candidate genes were identified based on this linkage map. This genetic linkage map will be a useful tool for the localization of other economically important QTLs and candidate genes for Jatropha.

Cassava genome from a wild ancestor to cultivated varieties.

Cassava is a major tropical food crop in the Euphorbiaceae family that has high carbohydrate production potential and adaptability to diverse environments. Here we present the draft genome sequences of a wild ancestor and a domesticated variety of cassava and comparative analyses with a partial inbred line. We identify 1,584 and 1,678 gene models specific to the wild and domesticated varieties, respectively, and discover high heterozygosity and millions of single-nucleotide variations. Our analyses reveal that genes involved in photosynthesis, starch accumulation and abiotic stresses have been positively selected, whereas those involved in cell wall biosynthesis and secondary metabolism, including cyanogenic glucoside formation, have been negatively selected in the cultivated varieties, reflecting the result of natural selection and domestication. Differences in microRNA genes and retrotransposon regulation could partly explain an increased carbon flux towards starch accumulation and reduced cyanogenic glucoside accumulation in domesticated cassava. These results may contribute to genetic improvement of cassava through better understanding of its biology.

Developmenrt of EST-SSR and genomic-SSR markers to assess genetic diversity in Jatropha Curcas L.

BACKGROUND: Jatropha curcas L. has attracted a great deal of attention worldwide, regarding its potential as a new biodiesel crop. However, the understanding of this crop remains very limited and little genomic research has been done. We used simple sequence repeat (SSR) markers that could be transferred from Manihot esculenta (cassava) to analyze the genetic relationships among 45 accessions of J. curcas from our germplasm collection. RESULTS: In total, 187 out of 419 expressed sequence tag (EST)-SSR and 54 out of 182 genomic (G)-SSR markers from cassava were polymorphic among the J. curcas accessions. The EST-SSR markers comprised 26.20% dinucleotide repeats, 57.75% trinucleotide repeats, 7.49% tetranucleotide repeats, and 8.56% pentanucleotide repeats, whereas the majority of the G-SSR markers were dinucleotide repeats (62.96%). The 187 EST-SSRs resided in genes that are involved mainly in biological and metabolic processes. Thirty-six EST-SSRs and 20 G-SSRs were chosen to analyze the genetic diversity among 45 J. curcas accessions. A total of 183 polymorphic alleles were detected. On the basis of the distribution of these polymorphic alleles, the 45 accessions were classified into six groups, in which the genotype showed a correlation with geographic origin. The estimated mean genetic diversity index was 0.5572, which suggests that our J. curcas germplasm collection has a high level of genetic diversity. This should facilitate subsequent studies on genetic mapping and molecular breeding. CONCLUSION: We identified 241 novel EST-SSR and G-SSR markers in J. curcas, which should be useful for genetic mapping and quantitative trait loci analysis of important agronomic traits. By using these markers, we found that the intergroup gene diversity of J. curcas was greater than the intragroup diversity, and that the domestication of the species probably occurred partly in America and partly in Hainan, China.